Instead of yielding from the bowels of the asm routine if a reschedule
is needed, divide up the input into 4 KB chunks in the C glue. This
simplifies the code substantially, and avoids scheduling out the task
with the asm routine on the call stack, which is undesirable from a
CFI/instrumentation point of view.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need for elaborate yield handling in the bit-sliced NEON
implementation of AES, given that skciphers are naturally bounded by the
size of the chunks returned by the skcipher_walk API. So remove the
yield calls from the asm code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit 6caf7adc5e.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit 7edc86cb1c.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit d82f37ab5e.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calling into kernel_neon_end() and kernel_neon_begin() (and
potentially into schedule()) from the assembler code when running in
task mode and a reschedule is pending, perform only the preempt count
check in assembler, but simply return early in this case, and let the C
code deal with the consequences.
This reverts commit 7df8d16475.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The length ('len' parameter) passed to crypto_ecdh_decode_key() is never
checked against the length encoded in the passed buffer ('buf'
parameter). This could lead to an out-of-bounds access when the passed
length is less than the encoded length.
Add a check to prevent that.
Fixes: 3c4b23901a ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eliminate the following coccicheck warning:
./arch/powerpc/crypto/sha256-spe-glue.c:132:2-3: Unneeded
semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following coccicheck warning:
./drivers/crypto/caam/debugfs.c:23:0-23: WARNING: caam_fops_u64_ro
should be defined with DEFINE_DEBUGFS_ATTRIBUTE.
./drivers/crypto/caam/debugfs.c:22:0-23: WARNING: caam_fops_u32_ro
should be defined with DEFINE_DEBUGFS_ATTRIBUTE.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
Twofish input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fcrypt implementation uses memcpy() to access the input and output
buffers so there is no need to set an alignmask.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
CAST6 input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
CAST5 input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
Camellia input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of
the Blowfish input and output blocks, which propagates to mode drivers,
and results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
Serpent input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is not trivial to trace back why exactly the tnepres variant of
serpent was added ~17 years ago - Google searches come up mostly empty,
but it seems to be related with the 'kerneli' version, which was based
on an incorrect interpretation of the serpent spec.
In other words, nobody is likely to care anymore today, so let's get rid
of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Michael MIC driver uses the cra_alignmask to ensure that pointers
presented to its update and finup/final methods are 32-bit aligned.
However, due to the way the shash API works, this is no guarantee that
the 32-bit reads occurring in the update method are also aligned, as the
size of the buffer presented to update may be of uneven length. For
instance, an update() of 3 bytes followed by a misaligned update() of 4
or more bytes will result in a misaligned access using an accessor that
is not suitable for this.
On most architectures, this does not matter, and so setting the
cra_alignmask is pointless. On architectures where this does matter,
setting the cra_alignmask does not actually solve the problem.
So let's get rid of the cra_alignmask, and use unaligned accessors
instead, where appropriate.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure cooldown period tolerance of 1% is actually accounted for.
Fixes: ca3bff70ab ("hwrng: timeriomem - Improve performance...")
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Marvell OcteonTX2 CPT physical function PCI device is present only
on OcteonTx2 SoC, and not available as an independent PCIe endpoint.
Hence add a dependency on ARCH_THUNDER2, to prevent asking the user
about this driver when configuring a kernel without OcteonTx2 platform
support.
Fixes: 5e8ce83347 ("crypto: marvell - add Marvell OcteonTX2 CPT PF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is currently possible to build CONFIG_HW_RANDOM_PPC4XX=y with
CONFIG_HW_RANDOM=m which would lead to the inability of linking with
devm_hwrng_{register,unregister}. We cannot have the framework modular
and the consumer of that framework built-in, so make that dependency
explicit.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto octeontx2 driver depends on the mbox code in the network
tree. It tries to select the MBOX Kconfig option but that option
itself depends on many other options which are not selected, e.g.,
CONFIG_NET_VENDOR_MARVELL. It would be inappropriate to select them
all as randomly prompting the user for network options which would
oterhwise be disabled just because a crypto driver has been enabled
makes no sense.
This patch fixes this by adding a dependency on NET_VENDOR_MARVELL.
This makes the crypto driver invisible if the network option is off.
If the crypto driver must be visible even without the network stack
then the shared mbox code should be moved out of drivers/net.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 5e8ce83347 ("crypto: marvell - add Marvell OcteonTX2 CPT...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "num_vec" has to be signed for the error handling to work.
Fixes: 19d8e8c7be ("crypto: octeontx2 - add virtual function driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a macro cond_yield that branches to a specified label when called if
the TIF_NEED_RESCHED flag is set and decreasing the preempt count would
make the task preemptible again, resulting in a schedule to occur. This
can be used by kernel mode SIMD code that keeps a lot of state in SIMD
registers, which would make chunking the input in order to perform the
cond_resched() check from C code disproportionately costly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210203113626.220151-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cesa driver mixes use of iomem pointers and normal kernel
pointers. Sometimes it uses memcpy_toio/memcpy_fromio on both
while other times it would use straight memcpy on both, through
the sg_pcopy_* helpers.
This patch fixes this by adding a new field sram_pool to the engine
for the normal pointer case which then allows us to use the right
interface depending on the value of engine->pool.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While ctr(aes) requires the use of a special descriptor on SEC2 (see
commit 70d355ccea ("crypto: talitos - fix ctr-aes-talitos")), that
special descriptor doesn't work on SEC1, see commit e738c5f155
("powerpc/8xx: Add DT node for using the SEC engine of the MPC885").
However, the common nonsnoop descriptor works properly on SEC1 for
ctr(aes).
Add a second template for ctr(aes) that will be registered
only on SEC1.
Fixes: 70d355ccea ("crypto: talitos - fix ctr-aes-talitos")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Talitos Security Engine AESU considers any input
data size that is not a multiple of 16 bytes to be an error.
This is not a problem in general, except for Counter mode
that is a stream cipher and can have an input of any size.
Test Manager for ctr(aes) fails on 4th test vector which has
a length of 499 while all previous vectors which have a 16 bytes
multiple length succeed.
As suggested by Freescale, round up the input data length to the
nearest 16 bytes.
Fixes: 5e75ae1b3c ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uacce SysFS support more algorithms inqury such as
'ecdh/ecdsa/sm2/x25519/x448'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.One CE error is detecting timeout of generating a random number.
2.Another is detecting timeout of SVA prefetching address.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete 'HPRE_RAS_ECC1BIT_TH' register setting of hpre,
since register 'QM_RAS_CE_THRESHOLD' of qm has done this work.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Taking ownership of the FPU in kernel mode disables preemption, and
this may result in excessive scheduling blackouts if the size of the
data being processed on the FPU is unbounded.
Given that taking and releasing the FPU is cheap these days on x86, we
can limit the impact of this issue easily for skcipher implementations,
by moving the FPU begin/end calls inside the skcipher walk processing
loop. Considering that skcipher walks operate on at most one page at a
time, doing so fully mitigates this issue.
This also permits the skcipher walk logic to use non-atomic kmalloc()
calls etc so we can change the 'atomic' bool argument in the calls to
skcipher_walk_virt() to false as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Indirect calls are very expensive on x86, so use a static call to set
the system-wide AES-NI/CTR asm helper.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
src_size and aad_size are defined as u32, so the following expressions are
currently being evaluated using 32-bit arithmetic:
bit_len = src_size * 8;
...
bit_len = aad_size * 8;
However, bit_len is used afterwards in a context that expects a valid
64-bit value (the lower and upper 32-bit words of bit_len are extracted
and written to hw).
In order to make sure the correct bit length is generated and the 32-bit
multiplication does not wrap around, cast src_size and aad_size to u64.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With no mod_exit function, users are unable to unload the module after
use. I'm not aware of any reason why module unloading should be
prohibited for this one, so this commit simply adds an empty exit
function.
Reported-and-tested-by: John Donnelly <john.p.donnelly@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Attach LFs to CPT VF to process the crypto requests and register
LF interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Marvell OcteonTX2 CPT virtual function
driver. This patch includes probe, PCI specific initialization
and interrupt handling.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds support to get engine capabilities and adds a new mailbox
to share capabilities with VF driver.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT RVU Local Functions(LFs) needs to be attached to the
PF/VF to submit the instructions to CPT.
This patch adds the interface to initialize and attach
the LFs. It also adds interface to register the LF's
interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT includes microcoded GigaCypher symmetric engines(SEs), IPsec
symmetric engines(IEs), and asymmetric engines (AEs).
Each engine receives CPT instructions from the engine groups it has
subscribed to. This patch loads microcode, configures three engine
groups(one for SEs, one for IEs and one for AEs), and configures
all engines.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds 'sriov_configure' to enable/disable virtual functions (VFs).
Also Initializes VF<=>PF mailbox IRQs, register handlers for
processing these mailbox messages.
Admin function (AF) handles resource allocation and configuration for
PFs and their VFs. PFs request the AF directly, via mailboxes.
Unlike PFs, VFs cannot send a mailbox request directly. A VF sends
mailbox messages to its parent PF, with which it shares a mailbox
region. The PF then forwards these messages to the AF. After handling
the request, the AF sends a response back to the VF, through the PF.
This patch adds support for this 'VF <=> PF <=> AF' mailbox
communication.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the resource virtualization unit (RVU) each of the PF and AF
(admin function) share a 64KB of reserved memory region for
communication. This patch initializes PF <=> AF mailbox IRQs,
registers handlers for processing these communication messages.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel
Daniele Alessandrelli
Yang Li
Jiapeng Chong
Jan Henrik Weinstock
Geert Uytterhoeven
Herbert Xu
Florian Fainelli
Dan Carpenter
dingsenjie
Christophe Leroy
Hui Tang
Ovidiu Panait
Jason A. Donenfeld
Srujana Challa