WSL2-Linux-Kernel/drivers/ata
David Daney 1fa25ab2ca ATA: pata_octeon_cf: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments.  Since the
CF bus timing logic is clocked by the I/O clock, use its rate for delay
calculations.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1660/
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:41 +01:00
..
Kconfig libata: remove no longer needed pata_winbond driver 2010-08-25 19:24:15 -04:00
Makefile Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y 2010-10-21 21:17:32 -04:00
ahci.c libata: reimplement link power management 2010-10-21 20:21:04 -04:00
ahci.h libahci: fix result_tf handling after an ATA PIO data-in command 2010-10-21 21:17:00 -04:00
ahci_platform.c libata: reimplement link power management 2010-10-21 20:21:04 -04:00
ata_generic.c ata: Intel IDE-R support 2010-10-21 20:21:05 -04:00
ata_piix.c ata_piix: Add device ID for ICH4-L 2010-10-21 20:21:05 -04:00
libahci.c libahci: fix result_tf handling after an ATA PIO data-in command 2010-10-21 21:17:00 -04:00
libata-acpi.c gcc-4.6: ACPI: fix unused but set variables in ACPI 2010-08-15 00:53:08 -04:00
libata-core.c libata: implement cross-port EH exclusion 2010-10-21 20:21:05 -04:00
libata-eh.c libata: implement cross-port EH exclusion 2010-10-21 20:21:05 -04:00
libata-pmp.c libata: implement LPM support for port multipliers 2010-10-21 20:21:04 -04:00
libata-scsi.c libata: Signal that our SATL supports WRITE SAME(16) with UNMAP 2010-10-21 20:21:05 -04:00
libata-sff.c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2010-10-22 17:13:10 -07:00
libata-transport.c drivers/ata/libata-transport.c: include linux/slab.h 2010-10-21 20:21:04 -04:00
libata-transport.h [libata] Add ATA transport class 2010-10-21 20:21:03 -04:00
libata.h libata: implement cross-port EH exclusion 2010-10-21 20:21:05 -04:00
pata_acpi.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_ali.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_amd.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_artop.c pata_artop: Fix device ID parity check 2010-09-09 14:19:18 -04:00
pata_at32.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
pata_at91.c libata-sff: clean up BMDMA initialization 2010-05-19 13:32:19 -04:00
pata_atiixp.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_atp867x.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
pata_bf54x.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2010-10-24 13:41:39 -07:00
pata_cmd64x.c pata_cmd64x: revert commit d62f5576 2010-08-25 19:24:15 -04:00
pata_cmd640.c pata_cmd640: implement sff_irq_check() method 2010-10-21 20:21:05 -04:00
pata_cs5520.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
pata_cs5530.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_cs5535.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_cs5536.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_cypress.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_efar.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_hpt3x2n.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_hpt3x3.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
pata_hpt37x.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_hpt366.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_icside.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
pata_isapnp.c
pata_it821x.c Update broken web addresses in the kernel. 2010-10-18 11:03:14 +02:00
pata_it8213.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_ixp4xx_cf.c dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) 2009-04-07 08:31:11 -07:00
pata_jmicron.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_legacy.c libata: remove no longer needed pata_winbond driver 2010-08-25 19:24:15 -04:00
pata_macio.c powerpc/macio: Fix probing of macio devices by using the right of match table 2010-06-02 17:50:38 +10:00
pata_marvell.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_mpc52xx.c of/device: Replace struct of_device with struct platform_device 2010-08-06 09:25:50 -06:00
pata_mpiix.c
pata_netcell.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_ninja32.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
pata_ns87410.c libata: Pass host flags into the pci helper 2010-03-01 14:58:46 -05:00
pata_ns87415.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_octeon_cf.c ATA: pata_octeon_cf: Use I/O clock rate for timing calculations. 2010-10-29 19:08:41 +01:00
pata_of_platform.c of/device: Replace struct of_device with struct platform_device 2010-08-06 09:25:50 -06:00
pata_oldpiix.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_opti.c libata: Pass host flags into the pci helper 2010-03-01 14:58:46 -05:00
pata_optidma.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_palmld.c [ARM] 5522/1: PalmLD: IDE support 2009-05-31 14:50:40 +01:00
pata_pcmcia.c pcmcia: move driver name to struct pcmcia_driver 2010-09-29 17:20:24 +02:00
pata_pdc202xx_old.c pata_pdc202xx_old: implement sff_irq_check() method 2010-10-21 20:21:06 -04:00
pata_pdc2027x.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
pata_piccolo.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_platform.c libata-sff: clean up BMDMA initialization 2010-05-19 13:32:19 -04:00
pata_pxa.c [ARM] pata_pxa: DMA-capable PATA driver 2010-06-18 15:07:32 +08:00
pata_qdi.c
pata_radisys.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_rb532_cf.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
pata_rdc.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_rz1000.c libata: Pass host flags into the pci helper 2010-03-01 14:58:46 -05:00
pata_samsung_cf.c libata: add @ap to ata_wait_register() and introduce ata_msleep() 2010-10-21 20:21:05 -04:00
pata_sc1200.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_scc.c libata: add @ap to ata_wait_register() and introduce ata_msleep() 2010-10-21 20:21:05 -04:00
pata_sch.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_serverworks.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_sil680.c pata_sil680: implement sff_irq_check() method 2010-10-21 20:21:06 -04:00
pata_sis.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_sl82c105.c pata_sl82c105: implement sff_irq_check() method 2010-10-21 20:21:06 -04:00
pata_triflex.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_via.c libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load() 2010-09-09 22:27:44 -04:00
pdc_adma.c libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific 2010-05-19 13:36:50 -04:00
sata_dwc_460ex.c [libata] sata_dwc_460ex: signdness bug 2010-08-25 19:24:16 -04:00
sata_fsl.c libata: add @ap to ata_wait_register() and introduce ata_msleep() 2010-10-21 20:21:05 -04:00
sata_inic162x.c libata: add @ap to ata_wait_register() and introduce ata_msleep() 2010-10-21 20:21:05 -04:00
sata_mv.c libata: always use ata_qc_complete_multiple() for NCQ command completions 2010-10-21 20:21:03 -04:00
sata_nv.c libata: always use ata_qc_complete_multiple() for NCQ command completions 2010-10-21 20:21:03 -04:00
sata_promise.c libata-sff: prd is BMDMA specific 2010-05-19 13:38:54 -04:00
sata_promise.h
sata_qstor.c libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf 2010-05-25 19:40:45 -04:00
sata_sil.c libata-sff: ata_sff_irq_clear() is BMDMA specific 2010-05-25 19:40:19 -04:00
sata_sil24.c libata: add @ap to ata_wait_register() and introduce ata_msleep() 2010-10-21 20:21:05 -04:00
sata_sis.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
sata_svw.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
sata_sx4.c libata-sff: separate out BMDMA EH 2010-05-19 13:36:46 -04:00
sata_uli.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
sata_via.c libata: add @ap to ata_wait_register() and introduce ata_msleep() 2010-10-21 20:21:05 -04:00
sata_vsc.c libata-sff: separate out BMDMA irq handler 2010-05-25 19:40:24 -04:00
sis.h