microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/ata
История
Dan Williams 81c757bc69 [SCSI] libsas: execute transport link resets with libata-eh via host workqueue 
Link resets leave ata affiliations intact, so arrange for libsas to make
an effort to avoid dropping the device due to a slow-to-recover link.
Towards this end carry out reset in the host workqueue so that it can
check for ata devices and kick the reset request to libata.  Hard
resets, in contrast, bypass libata since they are meant for associating
an ata device with another initiator in the domain (tears down
affiliations).

Need to add a new transport_sas_phy_reset() since the current
sas_phy_reset() is a utility function to libsas lldds.  They are not
prepared for it to loop back into eh.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 		2012-02-19 14:13:51 -06:00
..
Kconfig pata_of_platform: remove direct dependency on OF_IRQ 2012-01-08 19:14:58 -05:00
Makefile libata: remove no longer needed pata_qdi driver 2011-10-14 13:25:24 -04:00
acard-ahci.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
ahci.c ahci: support the STA2X11 I/O Hub 2012-01-08 19:24:06 -05:00
ahci.h ahci: move ahci_sb600_softreset to libahci.c and rename it 2011-07-23 17:57:36 -04:00
ahci_platform.c ahci: platform support for suspend/resume 2012-01-08 19:14:59 -05:00
ata_generic.c ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> 2011-07-23 17:57:36 -04:00
ata_piix.c [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list 2012-01-17 20:50:53 -05:00
libahci.c ahci: start engine only during soft/hard resets 2012-01-08 19:14:57 -05:00
libata-acpi.c Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 2011-08-02 21:17:02 -10:00
libata-core.c [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list 2012-01-17 20:50:07 -05:00
libata-eh.c [SCSI] libsas: execute transport link resets with libata-eh via host workqueue 2012-02-19 14:13:51 -06:00
libata-pmp.c [libata] Issue SRST to Sil3726 PMP 2011-11-09 01:38:00 -05:00
libata-scsi.c ata: add ata port runtime PM callbacks 2012-01-08 19:14:58 -05:00
libata-sff.c libata-sff: use ATAPI_{COD|IO} 2012-01-08 19:14:58 -05:00
libata-transport.c [libata] enable ata port async suspend 2012-01-17 20:48:06 -05:00
libata-transport.h [libata] Add ATA transport class 2010-10-21 20:21:03 -04:00
libata.h [SCSI] libsas: execute transport link resets with libata-eh via host workqueue 2012-02-19 14:13:51 -06:00
pata_acpi.c ata: remove unnecessary code 2011-07-23 18:07:27 -04:00
pata_ali.c pata_ali: fix "Satelite" typo 2011-10-14 13:10:42 -04:00
pata_amd.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_arasan_cf.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_artop.c pata_artop: add Power Management support 2011-10-14 13:32:54 -04:00
pata_at32.c libata: remove ATA_FLAG_MMIO 2011-03-02 02:36:46 -05:00
pata_at91.c Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev 2012-01-10 10:19:17 -08:00
pata_atiixp.c pata_atiixp: add proper ->prereset method 2011-10-14 13:16:49 -04:00
pata_atp867x.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_bf54x.c [libata] pata_bf54x: Support sg list in bmdma transfer. 2012-01-17 20:49:28 -05:00
pata_cmd64x.c pata_cmd64x: documentation fix 2011-10-14 13:10:46 -04:00
pata_cmd640.c pata_cmd640: implement sff_irq_check() method 2010-10-21 20:21:05 -04:00
pata_cs5520.c ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>( 2011-07-23 17:57:36 -04:00
pata_cs5530.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_cs5535.c pata_cs5535: no need to program PIO0 timings during device init 2011-10-14 13:08:05 -04:00
pata_cs5536.c pata_cs5536: forward port changes from cs5536 2012-01-08 19:14:58 -05:00
pata_cypress.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_efar.c pata_efar: fix register naming used in efar_set_piomode() 2011-10-14 13:38:40 -04:00
pata_hpt3x2n.c ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level> 2011-03-14 02:56:31 -04:00
pata_hpt3x3.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_hpt37x.c ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level> 2011-03-14 02:56:31 -04:00
pata_hpt366.c pata_hpt366: add hpt36x_find_mode() helper 2011-10-14 13:07:18 -04:00
pata_icside.c ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> 2011-07-23 17:57:36 -04:00
pata_imx.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_isapnp.c [libata] Improve timeout handling 2009-03-24 22:52:39 -04:00
pata_it821x.c pata_it821x: Fix RAID type display, by adding missing comma 2011-07-23 18:04:25 -04:00
pata_it8213.c pata_it8213: fix register naming used in it8213_set_piomode() 2011-10-14 13:25:17 -04:00
pata_ixp4xx_cf.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_jmicron.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_legacy.c pata_legacy: use PIO mask defines 2011-10-14 13:27:23 -04:00
pata_macio.c ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> 2011-07-23 17:57:36 -04:00
pata_marvell.c pata_marvell: Add support for 88SE91A0, 88SE91A4 2011-06-24 02:07:35 -04:00
pata_mpc52xx.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_mpiix.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_netcell.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_ninja32.c [libata] trivial: trim trailing whitespace for drivers/ata/*.[ch] 2011-03-02 02:36:45 -05:00
pata_ns87410.c ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>( 2011-07-23 17:57:36 -04:00
pata_ns87415.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_octeon_cf.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_of_platform.c pata_of_platform: remove direct dependency on OF_IRQ 2012-01-08 19:14:58 -05:00
pata_oldpiix.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_opti.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_optidma.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_palmld.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_pcmcia.c ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> 2011-07-23 17:57:36 -04:00
pata_pdc202xx_old.c pata_pdc202xx_old: implement sff_irq_check() method 2010-10-21 20:21:06 -04:00
pata_pdc2027x.c pata_pdc2027x: add Power Management support 2011-10-14 13:32:52 -04:00
pata_piccolo.c libata-sff: separate out BMDMA init 2010-05-25 19:40:30 -04:00
pata_platform.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_pxa.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_radisys.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_rb532_cf.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
pata_rdc.c pata_rdc: add Power Management support 2011-10-14 13:38:36 -04:00
pata_rz1000.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_samsung_cf.c ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> 2011-07-23 17:57:36 -04:00
pata_sc1200.c pata_sc1200: do not use c99 style comments 2011-10-14 13:01:42 -04:00
pata_scc.c pata_scc: add proper cable detection method 2011-10-14 13:19:51 -04:00
pata_sch.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_serverworks.c pata_serverworks: add serverworks_fixup() 2011-10-14 13:16:35 -04:00
pata_sil680.c pata_sil680: minor CodingStyle fixups 2011-10-14 12:46:45 -04:00
pata_sis.c pata_sis: code style cleanups for consistency 2011-10-08 00:07:16 -04:00
pata_sl82c105.c pata_sl82c105: add Power Management support 2011-10-14 13:32:53 -04:00
pata_triflex.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
pata_via.c pata_via: add via_fixup() 2011-10-14 13:22:54 -04:00
pdc_adma.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_dwc_460ex.c SATA/PATA: convert drivers/ata/* to use module_platform_driver() 2012-01-08 19:14:58 -05:00
sata_fsl.c [libata] sata_fsl: fix the controller operating mode 2012-01-17 20:49:07 -05:00
sata_inic162x.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_mv.c ARM: Orion: Get address map from plat-orion instead of via platform_data 2011-12-13 18:46:55 -05:00
sata_nv.c module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
sata_promise.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_promise.h libata annotations and fixes 2008-01-23 05:24:15 -05:00
sata_qstor.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_sil.c [libata] sata_sil: fix used-uninit warning 2011-08-18 23:52:36 -04:00
sata_sil24.c module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
sata_sis.c sata_sis.c: trivial spelling fix 2011-11-09 01:36:49 -05:00
sata_svw.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_sx4.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_uli.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sata_via.c ata: sata_via: Use dev_dbg 2011-07-23 17:57:36 -04:00
sata_vsc.c ata: Add and use ata_print_version_once 2011-07-23 17:57:36 -04:00
sis.h libata: PATA-mode fixes for sis_sata 2007-07-02 10:17:42 -04:00