match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.
In long term, match_pathspec() and match_one() should be removed in
favor of this function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If base is already matched, skip that part when calling
fnmatch(). This happens quite often if users start a command from
worktree's subdirectory and prefix is usually prepended to all
pathspecs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose we have two pathspecs 'a' and 'a/b' (both are dirs) and depth
limit 1. In current code, pathspecs are checked in input order. When
'a/b' is checked against pathspec 'a', it fails depth limit and
therefore is excluded, although it should match 'a/b' pathspec.
This patch reorders all pathspecs alphabetically, then teaches
tree_entry_interesting() to check against the deepest pathspec first,
so depth limit of a shallower pathspec won't affect a deeper one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to replace pathspec_matches() in builtin/grep.c.
max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In traversing trees, a full path is splitted into two parts: base
directory and entry. They are however quite often concatenated
whenever a full path is needed. Current code allocates a new buffer,
do two memcpy(), use it, then release.
Instead this patch turns "base" to a writable, extendable buffer. When
a concatenation is needed, the callee only needs to append "entry" to
base, use it, then truncate the entry out again. "base" must remain
unchanged before and after entering a function.
This avoids quite a bit of malloc() and memcpy().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be potentially used in more places than just
tree-diff.c. "struct diff_options" does not make much sense outside
diff_tree_sha1().
While removing the use of diff_options, it also removes
tree_entry_extract() call, which means S_ISDIR() uses the entry->mode
directly, without being filtered by canon_mode() (called internally
inside tree_entry_extract).
The only use of the mode information in this function is to check the
type of the entry by giving it to S_ISDIR() macro, and the result does
not change with or without canon_mode(), so it is ok to bypass
tree_entry_extract().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_options.{paths,nr_paths} will be removed later. Do not
modify them directly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old pathspec structure remains as pathspec.raw[]. New things are
stored in pathspec.items[]. There's no guarantee that the pathspec
order in raw[] is exactly as in items[].
raw[] is external (source) data and is untouched by pathspec
manipulation functions. It eases migration from old const char ** to
this new struct.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
The hints in the current "instruction sheet" template look like so:
# Rebase 3f14246..a1d7e01 onto 3f14246
#
# Commands:
# p, pick = use commit
# r, reword = use commit, but edit the commit message
# e, edit = use commit, but stop for amending
# s, squash = use commit, but meld into previous commit
# f, fixup = like "squash", but discard this commit's log message
# x <cmd>, exec <cmd> = Run a shell command <cmd>, and stop if it fails
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted.
#
This does not make it clear that the format of each line is
<insn> <commit id> <explanatory text that will be printed>
but the reader will probably infer that from the automatically
generated pick examples above it.
What about the "exec" instruction? By analogy, I might imagine that
the format of that line is "exec <command> <explanatory text>", and
the "x <cmd>" hint does not address that question (at first I read it
as taking an argument <cmd> that is the name of a shell). Meanwhile,
the mention of <cmd> makes the hints harder to scan as a table.
So remove the <cmd> and add some words to remind the reader that
"exec" runs a command named by the rest of the line. To make room, it
is left to the manpage to explain that that command is run using
$SHELL and that nonzero status from that command will pause the
rebase.
Wording from Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables should generally not be set in one's
environment, but they do get set by rebase, which means
doing an interactive rebase like:
pick abcd1234 foo
exec make test
will cause false negatives in the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it. This is in keeping with the
general UI philosophy: git tracks content, not empty directories.
v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:
M 040000 4b825dc642 subdir
One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree. It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.
Noticed-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you give a non-existent branch to git-rebase, it spits
out the usage. This can be confusing, since you may
understand the usage just fine, but simply have made a
mistake in the branch name.
Before:
$ git rebase origin bogus
Usage: git rebase ...
After:
$ git rebase origin bogus
fatal: no such branch: bogus
Usage: git rebase ...
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/setup-fixes:
t1510: fix typo in the comment of a test
Documentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase
Subject: setup: officially support --work-tree without --git-dir
tests: compress the setup tests
tests: cosmetic improvements to the repo-setup test
t/README: hint about using $(pwd) rather than $PWD in tests
Fix expected values of setup tests on Windows
The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory. Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.
However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process. It happens to work in simple cases, and is not worth causing
"regression" to these scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current treatment of "git reset --keep" emphasizes how it
differs from --hard (treatment of local changes) and how it breaks
down into plumbing (git read-tree -m -u HEAD <commit> followed by git
update-ref HEAD <commit>). This can discourage people from using
it, since it might seem to be a complex or niche option.
Better to emphasize what the --keep flag is intended for --- moving
the index and worktree from one commit to another, like "git checkout"
would --- so the reader can make a more informed decision about the
appropriate situations in which to use it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The errno check added in commit 3ba7a06 "A loose object is not corrupt
if it cannot be read due to EMFILE" only checked for whether errno is
not ENOENT and thus incorrectly treated "no error" as an error
condition.
Because of that, it never reached the code path that would report that
the object is corrupted and instead caused funny errors like:
fatal: failed to read object 333c4768ce595793fdab1ef3a036413e2a883853: Success
So we have to extend the check to cover the case in which the object
file was successfully read, but its contents are corrupted.
Reported-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test helpers:
- setup_repo, to initialize a repository or gitfile pointing to a
repository, with core.bare and core.worktree set as specified;
- try_case, to run setup from a given directory and validate the
result, with GIT_DIR and GIT_WORK_TREE set as specified;
- try_repo, to initialize a repository and call "try_case" from the
toplevel and a subdirectory;
- run_wt_tests, to run a battery of tests that check for sane
behavior when GIT_WORK_TREE is set to various positions relative to
the .git dir and cwd.
Use these helpers to make the test shorter, less repetitive, and (one
hopes) easier to understand and modify.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give an overview in "sh t1510-repo-setup.sh --help" output.
Waste some vertical and horizontal space for clearer code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This definition was added by commit 77cb17e9, but it's left unused since
commit 511707d. Remove the left-over definition.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/maint-test-fixes:
t9501-*.sh: Fix a test failure on Cygwin
lib-git-svn.sh: Add check for mis-configured web server variables
lib-git-svn.sh: Avoid setting web server variables unnecessarily
t9142: Move call to start_httpd into the setup test
t3600-rm.sh: Don't pass a non-existent prereq to test #15
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
Nguyễn Thái Ngọc Duy
Jonathan Nieder
Junio C Hamano
Adam Tkac
Jeff King
Björn Steinbrink
Erik Faye-Lund