gecko-dev/layout/base/nsCSSRendering.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 *
 * The contents of this file are subject to the Netscape Public
 * License Version 1.1 (the "License"); you may not use this file
 * except in compliance with the License. You may obtain a copy of
 * the License at http://www.mozilla.org/NPL/
 *
 * Software distributed under the License is distributed on an "AS
 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
 * implied. See the License for the specific language governing
 * rights and limitations under the License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is Netscape
 * Communications Corporation.  Portions created by Netscape are
 * Copyright (C) 1998 Netscape Communications Corporation. All
 * Rights Reserved.
 *
 * Contributor(s): 
 */
#include "nsCSSRendering.h"
#include "nsStyleConsts.h"
#include "nsIPresContext.h"
#include "nsIImage.h"
#include "nsIFrame.h"
#include "nsPoint.h"
#include "nsRect.h"
#include "nsIViewManager.h"
#include "nsIPresShell.h"
#include "nsIFrameImageLoader.h"
#include "nsIStyleContext.h"
#include "nsStyleUtil.h"
#include "nsIScrollableView.h"
#include "nsLayoutAtoms.h"
#include "nsIDrawingSurface.h"
#include "nsTransform2D.h"
#include "nsIDeviceContext.h"

static NS_DEFINE_IID(kScrollViewIID, NS_ISCROLLABLEVIEW_IID);

#define BORDER_FULL    0        //entire side
#define BORDER_INSIDE  1        //inside half
#define BORDER_OUTSIDE 2        //outside half

//thickness of dashed line relative to dotted line
#define DOT_LENGTH  1           //square
#define DASH_LENGTH 3           //3 times longer than dot


/** The following classes are used by CSSRendering for the rounded rect implementation */
#define MAXPATHSIZE 12
#define MAXPOLYPATHSIZE 1000

enum ePathTypes{
  eOutside =0,
  eInside,
  eCalc,
  eCalcRev
};

static void GetPath(nsPoint aPoints[],nsPoint aPolyPath[],PRInt32 *aCurIndex,ePathTypes  aPathType,PRInt32 &aC1Index,float aFrac=0);
static void TileImage(nsIRenderingContext& aRC,nsDrawingSurface  aDS,nsRect &aSrcRect,PRInt16 aWidth,PRInt16 aHeight);


// Draw a line, skipping that portion which crosses aGap. aGap defines a rectangle gap
// This services fieldset legends and only works for coords defining horizontal lines.
void nsCSSRendering::DrawLine (nsIRenderingContext& aContext, 
                               nscoord aX1, nscoord aY1, nscoord aX2, nscoord aY2,
                               nsRect* aGap)
{
  if (nsnull == aGap) {
    aContext.DrawLine(aX1, aY1, aX2, aY2);
  } else {
    nscoord x1 = (aX1 < aX2) ? aX1 : aX2;
    nscoord x2 = (aX1 < aX2) ? aX2 : aX1;
    nsPoint gapUpperRight(aGap->x + aGap->width, aGap->y);
    nsPoint gapLowerRight(aGap->x + aGap->width, aGap->y + aGap->height);
    if ((aGap->y <= aY1) && (gapLowerRight.y >= aY2)) {
      if ((aGap->x > x1) && (aGap->x < x2)) {
        aContext.DrawLine(x1, aY1, aGap->x, aY1);
      } 
      if ((gapLowerRight.x > x1) && (gapLowerRight.x < x2)) {
        aContext.DrawLine(gapUpperRight.x, aY2, x2, aY2);
      } 
    } else {
      aContext.DrawLine(aX1, aY1, aX2, aY2);
    }
  }
}

// Fill a polygon, skipping that portion which crosses aGap. aGap defines a rectangle gap
// This services fieldset legends and only works for points defining a horizontal rectangle 
void nsCSSRendering::FillPolygon (nsIRenderingContext& aContext, 
                                  const nsPoint aPoints[],
                                  PRInt32 aNumPoints,
                                  nsRect* aGap)
{
  if (nsnull == aGap) {
    aContext.FillPolygon(aPoints, aNumPoints);
  } else if (4 == aNumPoints) {
    nsPoint gapUpperRight(aGap->x + aGap->width, aGap->y);
    nsPoint gapLowerRight(aGap->x + aGap->width, aGap->y + aGap->height);

    // sort the 4 points by x
    nsPoint points[4];
    for (PRInt32 pX = 0; pX < 4; pX++) {
      points[pX] = aPoints[pX];
    }
    for (PRInt32 i = 0; i < 3; i++) {
      for (PRInt32 j = i+1; j < 4; j++) { 
        if (points[j].x < points[i].x) {
          nsPoint swap = points[i];
          points[i] = points[j];
          points[j] = swap;
        }
      }
    }

    nsPoint upperLeft  = (points[0].y <= points[1].y) ? points[0] : points[1];
    nsPoint lowerLeft  = (points[0].y <= points[1].y) ? points[1] : points[0];
    nsPoint upperRight = (points[2].y <= points[3].y) ? points[2] : points[3];
    nsPoint lowerRight = (points[2].y <= points[3].y) ? points[3] : points[2];


    if ((aGap->y <= upperLeft.y) && (gapLowerRight.y >= lowerRight.y)) {
      if ((aGap->x > upperLeft.x) && (aGap->x < upperRight.x)) {
        nsPoint leftRect[4];
        leftRect[0] = upperLeft;
        leftRect[1] = nsPoint(aGap->x, upperLeft.y);
        leftRect[2] = nsPoint(aGap->x, lowerLeft.y);
        leftRect[3] = lowerLeft;
        aContext.FillPolygon(leftRect, 4);
      } 
      if ((gapUpperRight.x > upperLeft.x) && (gapUpperRight.x < upperRight.x)) {
        nsPoint rightRect[4];
        rightRect[0] = nsPoint(gapUpperRight.x, upperRight.y);
        rightRect[1] = upperRight;
        rightRect[2] = lowerRight;
        rightRect[3] = nsPoint(gapLowerRight.x, lowerRight.y);
        aContext.FillPolygon(rightRect, 4);
      } 
    } else {
      aContext.FillPolygon(aPoints, aNumPoints);
    }      
  }
}

/**
 * Make a bevel color
 */
nscolor nsCSSRendering::MakeBevelColor(PRIntn whichSide, PRUint8 style,
                                       nscolor aBackgroundColor,
                                       nscolor aBorderColor,
                                       PRBool aSpecialCase)
{

  nscolor colors[2];
  nscolor theColor;

  // Given a background color and a border color
  // calculate the color used for the shading
  if(aSpecialCase)
    NS_GetSpecial3DColors(colors, aBackgroundColor, aBorderColor);
  else
    NS_Get3DColors(colors, aBackgroundColor);
 

  if ((style == NS_STYLE_BORDER_STYLE_BG_OUTSET) ||
	  (style == NS_STYLE_BORDER_STYLE_OUTSET) ||
      (style == NS_STYLE_BORDER_STYLE_RIDGE)) {
    // Flip colors for these two border style
    switch (whichSide) {
    case NS_SIDE_BOTTOM: whichSide = NS_SIDE_TOP;    break;
    case NS_SIDE_RIGHT:  whichSide = NS_SIDE_LEFT;   break;
    case NS_SIDE_TOP:    whichSide = NS_SIDE_BOTTOM; break;
    case NS_SIDE_LEFT:   whichSide = NS_SIDE_RIGHT;  break;
    }
  }

  switch (whichSide) {
  case NS_SIDE_BOTTOM:
    theColor = colors[1];
    break;
  case NS_SIDE_RIGHT:
    theColor = colors[1];
    break;
  case NS_SIDE_TOP:
    theColor = colors[0];
    break;
  case NS_SIDE_LEFT:
  default:
    theColor = colors[0];
    break;
  }
  return theColor;
}

// Maximum poly points in any of the polygons we generate below
#define MAX_POLY_POINTS 4

// a nifty helper function to create a polygon representing a
// particular side of a border. This helps localize code for figuring
// mitered edges. It is mainly used by the solid, inset, and outset
// styles.
//
// If the side can be represented as a line segment (because the thickness
// is one pixel), then a line with two endpoints is returned
PRIntn nsCSSRendering::MakeSide(nsPoint aPoints[],
                                nsIRenderingContext& aContext,
                                PRIntn whichSide,
                                const nsRect& outside, const nsRect& inside,
                                PRIntn aSkipSides,
                                PRIntn borderPart, float borderFrac,
                                nscoord twipsPerPixel)
{
  float borderRest = 1.0f - borderFrac;

  PRIntn np = 0;
  nscoord thickness, outsideEdge, insideEdge, outsideTL, insideTL, outsideBR,
    insideBR;

  // Initialize the following six nscoord's:
  // outsideEdge, insideEdge, outsideTL, insideTL, outsideBR, insideBR
  // so that outsideEdge is the x or y of the outside edge, etc., and
  // outsideTR is the y or x at the top or right end, etc., e.g.:
  //
  // outsideEdge ---  ----------------------------------------
  //                  \                                      /
  //                   \                                    /
  //                    \                                  /
  // insideEdge -------  ----------------------------------
  //                 |   |                                |   |
  //         outsideTL   insideTL                  insideBR   outsideBR       
  //
  // if we don't want the bevel, we'll get rid of it later by setting
  // outsideXX to insideXX

  switch (whichSide) {
  case NS_SIDE_TOP:
    // the TL points are the left end; the BR points are the right end
    outsideEdge = outside.y;
    insideEdge = inside.y;
    outsideTL = outside.x;
    insideTL = inside.x;
    insideBR = inside.XMost();
    outsideBR = outside.XMost();
    break;

  case NS_SIDE_BOTTOM:
    // the TL points are the left end; the BR points are the right end
    outsideEdge = outside.YMost();
    insideEdge = inside.YMost();
    outsideTL = outside.x;
    insideTL = inside.x;
    insideBR = inside.XMost();
    outsideBR = outside.XMost();
    break;

  case NS_SIDE_LEFT:
    // the TL points are the top end; the BR points are the bottom end
    outsideEdge = outside.x;
    insideEdge = inside.x;
    outsideTL = outside.y;
    insideTL = inside.y;
    insideBR = inside.YMost();
    outsideBR = outside.YMost();
    break;

  case NS_SIDE_RIGHT:
    // the TL points are the top end; the BR points are the bottom end
    outsideEdge = outside.XMost();
    insideEdge = inside.XMost();
    outsideTL = outside.y;
    insideTL = inside.y;
    insideBR = inside.YMost();
    outsideBR = outside.YMost();
    break;
  }

  // Don't draw the bevels if an adjacent side is skipped

  if ( (whichSide == NS_SIDE_TOP) || (whichSide == NS_SIDE_BOTTOM) ) {
    // a top or bottom side
    if ((1<<NS_SIDE_LEFT) & aSkipSides) {
      insideTL = outsideTL;
    }
    if ((1<<NS_SIDE_RIGHT) & aSkipSides) {
      insideBR = outsideBR;
    }
  } else {
    // a right or left side
    if ((1<<NS_SIDE_TOP) & aSkipSides) {
      insideTL = outsideTL;
    }
    if ((1<<NS_SIDE_BOTTOM) & aSkipSides) {
      insideBR = outsideBR;
    }
  }

  // move things around when only drawing part of the border

  if (borderPart == BORDER_INSIDE) {
    outsideEdge = nscoord(outsideEdge * borderFrac + insideEdge * borderRest);
    outsideTL = nscoord(outsideTL * borderFrac + insideTL * borderRest);
    outsideBR = nscoord(outsideBR * borderFrac + insideBR * borderRest);
  } else if (borderPart == BORDER_OUTSIDE ) {
    insideEdge = nscoord(insideEdge * borderFrac + outsideEdge * borderRest);
    insideTL = nscoord(insideTL * borderFrac + outsideTL * borderRest);
    insideBR = nscoord(insideBR * borderFrac + outsideBR * borderRest);
  }

  // Base our thickness check on the segment being less than a pixel and 1/2
  twipsPerPixel += twipsPerPixel >> 2;

  // find the thickness of the piece being drawn
  if ((whichSide == NS_SIDE_TOP) || (whichSide == NS_SIDE_LEFT)) {
    thickness = insideEdge - outsideEdge;
  } else {
    thickness = outsideEdge - insideEdge;
  }

  // if returning a line, do it along inside edge for bottom or right borders
  // so that it's in the same place as it would be with polygons (why?)
  // XXX The previous version of the code shortened the right border too.
  if ( !((thickness >= twipsPerPixel) || (borderPart != BORDER_FULL)) &&
       ((whichSide == NS_SIDE_BOTTOM) || (whichSide == NS_SIDE_RIGHT))) {
    outsideEdge = insideEdge;
    }

  // return the appropriate line or trapezoid
  if ((whichSide == NS_SIDE_TOP) || (whichSide == NS_SIDE_BOTTOM)) {
    // top and bottom borders
    aPoints[np++].MoveTo(outsideTL,outsideEdge);
    aPoints[np++].MoveTo(outsideBR,outsideEdge);
    // XXX Making this condition only (thickness >= twipsPerPixel) will
    // improve double borders and some cases of groove/ridge,
    //  but will cause problems with table borders.  See last and third
    // from last tests in test4.htm
    // Doing it this way emulates the old behavior.  It might be worth
    // fixing.
    if ((thickness >= twipsPerPixel) || (borderPart != BORDER_FULL) ) {
      aPoints[np++].MoveTo(insideBR,insideEdge);
      aPoints[np++].MoveTo(insideTL,insideEdge);
    }
  } else {
    // right and left borders
    // XXX Ditto above
    if ((thickness >= twipsPerPixel) || (borderPart != BORDER_FULL) )  {
      aPoints[np++].MoveTo(insideEdge,insideBR);
      aPoints[np++].MoveTo(insideEdge,insideTL);
    }
    aPoints[np++].MoveTo(outsideEdge,outsideTL);
    aPoints[np++].MoveTo(outsideEdge,outsideBR);
  }
  return np;
}

void nsCSSRendering::DrawSide(nsIRenderingContext& aContext,
                              PRIntn whichSide,
                              const PRUint8 borderStyle,  
                              const nscolor borderColor,
                              const nscolor aBackgroundColor,
                              const nsRect& borderOutside,
                              const nsRect& borderInside,
                              PRIntn aSkipSides,
                              nscoord twipsPerPixel,
                              nsRect* aGap)
{
  nsPoint theSide[MAX_POLY_POINTS];
  nscolor theColor = borderColor; 
  PRUint8 theStyle = borderStyle; 
  PRInt32 np;
  switch (theStyle) {
  case NS_STYLE_BORDER_STYLE_NONE:
  case NS_STYLE_BORDER_STYLE_HIDDEN:
  case NS_STYLE_BORDER_STYLE_BLANK:
    return;

  case NS_STYLE_BORDER_STYLE_DOTTED:    //handled a special case elsewhere
  case NS_STYLE_BORDER_STYLE_DASHED:    //handled a special case elsewhere
    break; // That was easy...

  case NS_STYLE_BORDER_STYLE_GROOVE:
  case NS_STYLE_BORDER_STYLE_RIDGE:
    np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside, aSkipSides,
                   BORDER_INSIDE, 0.5f, twipsPerPixel);
    aContext.SetColor ( MakeBevelColor (whichSide, 
                                        ((theStyle == NS_STYLE_BORDER_STYLE_RIDGE) ?
                                         NS_STYLE_BORDER_STYLE_GROOVE :
                                         NS_STYLE_BORDER_STYLE_RIDGE), 
										 aBackgroundColor, theColor, 
										 PR_TRUE));
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
    }
    np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside,aSkipSides,
                   BORDER_OUTSIDE, 0.5f, twipsPerPixel);
    aContext.SetColor ( MakeBevelColor (whichSide, theStyle, aBackgroundColor, 
		                                theColor, PR_TRUE));
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
    }
    break;

  case NS_STYLE_BORDER_STYLE_SOLID:
    np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside,aSkipSides,
                   BORDER_FULL, 1.0f, twipsPerPixel);
    aContext.SetColor (borderColor);  
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
    }
    break;

  case NS_STYLE_BORDER_STYLE_DOUBLE:
    np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside,aSkipSides,
                   BORDER_INSIDE, 0.333333f, twipsPerPixel);
    aContext.SetColor (borderColor);
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
   }
    np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside,aSkipSides,
                   BORDER_OUTSIDE, 0.333333f, twipsPerPixel);
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
    }
    break;

  case NS_STYLE_BORDER_STYLE_BG_OUTSET:
  case NS_STYLE_BORDER_STYLE_BG_INSET:
    np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside,aSkipSides,
                   BORDER_FULL, 1.0f, twipsPerPixel);
    aContext.SetColor ( MakeBevelColor (whichSide, theStyle, aBackgroundColor,
		                                 theColor, PR_FALSE));
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
    }
    break;
  case NS_STYLE_BORDER_STYLE_OUTSET:
  case NS_STYLE_BORDER_STYLE_INSET:
	np = MakeSide (theSide, aContext, whichSide, borderOutside, borderInside,aSkipSides,
                   BORDER_FULL, 1.0f, twipsPerPixel);
    aContext.SetColor ( MakeBevelColor (whichSide, theStyle, aBackgroundColor, 
		                                theColor, PR_TRUE));
    if (2 == np) {
      //aContext.DrawLine (theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y);
      DrawLine (aContext, theSide[0].x, theSide[0].y, theSide[1].x, theSide[1].y, aGap);
    } else {
      //aContext.FillPolygon (theSide, np);
      FillPolygon (aContext, theSide, np, aGap);
    }
    break;
  }
}

/**
 * Draw a dotted/dashed sides of a box
 */
//XXX dashes which span more than two edges are not handled properly MMP
void nsCSSRendering::DrawDashedSides(PRIntn startSide,
                                     nsIRenderingContext& aContext,
                                     const nsRect& aDirtyRect,
                                     const PRUint8 borderStyles[],  
                                     const nscolor borderColors[],  
                                     const nsRect& borderOutside,
                                     const nsRect& borderInside,
                                     PRIntn aSkipSides,
                                     nsRect* aGap)
{
PRIntn  dashLength;
nsRect  dashRect, firstRect, currRect;
PRBool  bSolid = PR_TRUE;
float   over = 0.0f;
PRUint8 style = borderStyles[startSide];  
PRBool  skippedSide = PR_FALSE;
nscoord xstart,xwidth,ystart,ywidth;

  // find out were x and y start
  if(aDirtyRect.x > borderInside.x) {
    xstart = aDirtyRect.x;
  } else {
    xstart = borderInside.x;
  }

  if(aDirtyRect.y > borderInside.y) {
    ystart = aDirtyRect.y;
  } else {
    ystart = aDirtyRect.y;
  }

  // find the x and y width
  xwidth = aDirtyRect.XMost();
  ywidth = aDirtyRect.YMost();

  for (PRIntn whichSide = startSide; whichSide < 4; whichSide++) {
    PRUint8 prevStyle = style;
    style = borderStyles[whichSide];  
    if ((1<<whichSide) & aSkipSides) {
      // Skipped side
      skippedSide = PR_TRUE;
      continue;
    }
    if ((style == NS_STYLE_BORDER_STYLE_DASHED) ||
        (style == NS_STYLE_BORDER_STYLE_DOTTED))
    {
      if ((style != prevStyle) || skippedSide) {
        //style discontinuity
        over = 0.0f;
        bSolid = PR_TRUE;
      }

      // XXX units for dash & dot?
      if (style == NS_STYLE_BORDER_STYLE_DASHED) {
        dashLength = DASH_LENGTH;
      } else {
        dashLength = DOT_LENGTH;
      }

      aContext.SetColor(borderColors[whichSide]);  
      switch (whichSide) {
      case NS_SIDE_LEFT:
        //XXX need to properly handle wrap around from last edge to first edge
        //(this is the first edge) MMP
        dashRect.width = borderInside.x - borderOutside.x;
        dashRect.height = nscoord(dashRect.width * dashLength);
        dashRect.x = borderOutside.x;
        dashRect.y = borderInside.YMost() - dashRect.height;

        if (over > 0.0f) {
          firstRect.x = dashRect.x;
          firstRect.width = dashRect.width;
          firstRect.height = nscoord(dashRect.height * over);
          firstRect.y = dashRect.y + (dashRect.height - firstRect.height);
          over = 0.0f;
          currRect = firstRect;
        } else {
          currRect = dashRect;
        }

        while (currRect.YMost() > borderInside.y) {
          //clip if necessary
          if (currRect.y < borderInside.y) {
            over = float(borderInside.y - dashRect.y) /
              float(dashRect.height);
            currRect.height = currRect.height - (borderInside.y - currRect.y);
            currRect.y = borderInside.y;
          }

          //draw if necessary
          if (bSolid) {
            aContext.FillRect(currRect);
          }

          //setup for next iteration
          if (over == 0.0f) {
            bSolid = PRBool(!bSolid);
          }
          dashRect.y = dashRect.y - currRect.height;
          currRect = dashRect;
        }
        break;

      case NS_SIDE_TOP:
        //if we are continuing a solid rect, fill in the corner first
        if (bSolid) {
          aContext.FillRect(borderOutside.x, borderOutside.y,
                            borderInside.x - borderOutside.x,
                            borderInside.y - borderOutside.y);
        }

        dashRect.height = borderInside.y - borderOutside.y;
        dashRect.width = dashRect.height * dashLength;
        dashRect.x = borderInside.x;
        dashRect.y = borderOutside.y;

        if (over > 0.0f) {
          firstRect.x = dashRect.x;
          firstRect.y = dashRect.y;
          firstRect.width = nscoord(dashRect.width * over);
          firstRect.height = dashRect.height;
          over = 0.0f;
          currRect = firstRect;
        } else {
          currRect = dashRect;
        }

        while (currRect.x < borderInside.XMost()) {
          //clip if necessary
          if (currRect.XMost() > borderInside.XMost()) {
            over = float(dashRect.XMost() - borderInside.XMost()) /
              float(dashRect.width);
            currRect.width = currRect.width -
              (currRect.XMost() - borderInside.XMost());
          }

          //draw if necessary
          if (bSolid) {
            aContext.FillRect(currRect);
          }

          //setup for next iteration
          if (over == 0.0f) {
            bSolid = PRBool(!bSolid);
          }
          dashRect.x = dashRect.x + currRect.width;
          currRect = dashRect;
        }
        break;

      case NS_SIDE_RIGHT:
        //if we are continuing a solid rect, fill in the corner first
        if (bSolid) {
          aContext.FillRect(borderInside.XMost(), borderOutside.y,
                            borderOutside.XMost() - borderInside.XMost(),
                            borderInside.y - borderOutside.y);
        }

        dashRect.width = borderOutside.XMost() - borderInside.XMost();
        dashRect.height = nscoord(dashRect.width * dashLength);
        dashRect.x = borderInside.XMost();
        dashRect.y = borderInside.y;

        if (over > 0.0f) {
          firstRect.x = dashRect.x;
          firstRect.y = dashRect.y;
          firstRect.width = dashRect.width;
          firstRect.height = nscoord(dashRect.height * over);
          over = 0.0f;
          currRect = firstRect;
        } else {
          currRect = dashRect;
        }

        while (currRect.y < borderInside.YMost()) {
          //clip if necessary
          if (currRect.YMost() > borderInside.YMost()) {
            over = float(dashRect.YMost() - borderInside.YMost()) /
              float(dashRect.height);
            currRect.height = currRect.height -
              (currRect.YMost() - borderInside.YMost());
          }

          //draw if necessary
          if (bSolid) {
            aContext.FillRect(currRect);
          }

          //setup for next iteration
          if (over == 0.0f) {
            bSolid = PRBool(!bSolid);
          }
          dashRect.y = dashRect.y + currRect.height;
          currRect = dashRect;
        }
        break;

      case NS_SIDE_BOTTOM:
        //if we are continuing a solid rect, fill in the corner first
        if (bSolid) {
          aContext.FillRect(borderInside.XMost(), borderInside.YMost(),
                            borderOutside.XMost() - borderInside.XMost(),
                            borderOutside.YMost() - borderInside.YMost());
        }

        dashRect.height = borderOutside.YMost() - borderInside.YMost();
        dashRect.width = nscoord(dashRect.height * dashLength);
        dashRect.x = borderInside.XMost() - dashRect.width;
        dashRect.y = borderInside.YMost();

        if (over > 0.0f) {
          firstRect.y = dashRect.y;
          firstRect.width = nscoord(dashRect.width * over);
          firstRect.height = dashRect.height;
          firstRect.x = dashRect.x + (dashRect.width - firstRect.width);
          over = 0.0f;
          currRect = firstRect;
        } else {
          currRect = dashRect;
        }

        while (currRect.XMost() > borderInside.x) {
          //clip if necessary
          if (currRect.x < borderInside.x) {
            over = float(borderInside.x - dashRect.x) / float(dashRect.width);
            currRect.width = currRect.width - (borderInside.x - currRect.x);
            currRect.x = borderInside.x;
          }

          //draw if necessary
          if (bSolid) {
            aContext.FillRect(currRect);
          }

          //setup for next iteration
          if (over == 0.0f) {
            bSolid = PRBool(!bSolid);
          }
          dashRect.x = dashRect.x - currRect.width;
          currRect = dashRect;
        }
        break;
      }
    }
    skippedSide = PR_FALSE;
  }
}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 10/22/99 dwc
 */
void nsCSSRendering::DrawDashedSides(PRIntn startSide,
                                     nsIRenderingContext& aContext,
                                     const nsRect& aDirtyRect,
                                     const nsStyleSpacing& aSpacing,
                                     PRBool aDoOutline,
                                     const nsRect& borderOutside,
                                     const nsRect& borderInside,
                                     PRIntn aSkipSides,
                                     nsRect* aGap)
{
PRIntn  dashLength;
nsRect  dashRect, currRect;
nscoord xstart,xwidth,ystart,ywidth,temp,temp1,adjust;
PRBool  bSolid = PR_TRUE;
float   over = 0.0f;
PRUint8 style = aDoOutline?aSpacing.GetOutlineStyle():aSpacing.GetBorderStyle(startSide);  
PRBool  skippedSide = PR_FALSE;


  // find out were x and y start
  if(aDirtyRect.x > borderInside.x) {
    xstart = aDirtyRect.x;
  } else {
    xstart = borderInside.x;
  }

  if(aDirtyRect.y > borderInside.y) {
    ystart = aDirtyRect.y;
  } else {
    ystart = borderInside.y;
  }


  // find the x and y width
  xwidth = aDirtyRect.XMost();
  ywidth = aDirtyRect.YMost();


  for (PRIntn whichSide = startSide; whichSide < 4; whichSide++) {
    PRUint8 prevStyle = style;
    style = aDoOutline?aSpacing.GetOutlineStyle():aSpacing.GetBorderStyle(whichSide);  
    if ((1<<whichSide) & aSkipSides) {
      // Skipped side
      skippedSide = PR_TRUE;
      continue;
    }
    if ((style == NS_STYLE_BORDER_STYLE_DASHED) ||
        (style == NS_STYLE_BORDER_STYLE_DOTTED))
    {
      if ((style != prevStyle) || skippedSide) {
        //style discontinuity
        over = 0.0f;
        bSolid = PR_TRUE;
      }

      if (style == NS_STYLE_BORDER_STYLE_DASHED) {
        dashLength = DASH_LENGTH;
      } else {
        dashLength = DOT_LENGTH;
      }

      nscolor sideColor;
      if (aDoOutline) {
        aSpacing.GetOutlineColor(sideColor);
      } else {
        if (!aSpacing.GetBorderColor(whichSide, sideColor)) {
          continue; // side is transparent
        }
      }
      aContext.SetColor(sideColor);  
      switch (whichSide) {
      case NS_SIDE_RIGHT:
      case NS_SIDE_LEFT:
        bSolid = PR_FALSE;
        
        // This is our dot or dash..
        if(whichSide==NS_SIDE_LEFT){ 
          dashRect.width = borderInside.x - borderOutside.x;
        } else {
          dashRect.width = borderOutside.XMost() - borderInside.XMost();
        }
        if( dashRect.width >0 ) {
          dashRect.height = dashRect.width * dashLength;
          dashRect.y = borderOutside.y;

          if(whichSide == NS_SIDE_RIGHT){
            dashRect.x = borderInside.XMost();
          } else {
            dashRect.x = borderOutside.x;
          }

          temp = borderOutside.YMost();
          temp1 = temp/dashRect.height;

          currRect = dashRect;

          if((temp1%2)==0){
            adjust = (dashRect.height-(temp%dashRect.height))/2; // adjust back
            // draw in the left and right
            aContext.FillRect(dashRect.x, borderOutside.y,dashRect.width, dashRect.height-adjust);
            aContext.FillRect(dashRect.x,(borderOutside.YMost()-(dashRect.height-adjust)),dashRect.width, dashRect.height-adjust);
            currRect.y += (dashRect.height-adjust);
            temp = temp-= (dashRect.height-adjust);
          } else {
            adjust = (temp%dashRect.width)/2;                   // adjust a tad longer
            // draw in the left and right
            aContext.FillRect(dashRect.x, borderOutside.y,dashRect.width, dashRect.height+adjust);
            aContext.FillRect(dashRect.x,(borderOutside.YMost()-(dashRect.height+adjust)),dashRect.width, dashRect.height+adjust);
            currRect.y += (dashRect.height+adjust);
            temp = temp-= (dashRect.height+adjust);
          }
        
          if( temp > ywidth)
            temp = ywidth;

          // get the currRect's x into the view before we start
          if( currRect.y < aDirtyRect.y){
            temp1 = NSToCoordFloor((float)((aDirtyRect.y-currRect.y)/dashRect.height));
            currRect.y += temp1*dashRect.height;
            if((temp1%2)==1){
              bSolid = PR_TRUE;
            }
         }

          while(currRect.y<temp) {
            //draw if necessary
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            bSolid = PRBool(!bSolid);
            currRect.y += dashRect.height;
          }
        }
        break;

      case NS_SIDE_BOTTOM:
      case NS_SIDE_TOP:
        bSolid = PR_FALSE;
        
        // This is our dot or dash..

        if(whichSide==NS_SIDE_TOP){ 
          dashRect.height = borderInside.y - borderOutside.y;
        } else {
          dashRect.height = borderOutside.YMost() - borderInside.YMost();
        }
        if( dashRect.height >0 ) {
          dashRect.width = dashRect.height * dashLength;
          dashRect.x = borderOutside.x;

          if(whichSide == NS_SIDE_BOTTOM){
            dashRect.y = borderInside.YMost();
          } else {
            dashRect.y = borderOutside.y;
          }

          temp = borderOutside.XMost();
          temp1 = temp/dashRect.width;

          currRect = dashRect;

          if((temp1%2)==0){
            adjust = (dashRect.width-(temp%dashRect.width))/2;     // even, adjust back
            // draw in the left and right
            aContext.FillRect(borderOutside.x,dashRect.y,dashRect.width-adjust,dashRect.height);
            aContext.FillRect((borderOutside.XMost()-(dashRect.width-adjust)),dashRect.y,dashRect.width-adjust,dashRect.height);
            currRect.x += (dashRect.width-adjust);
            temp = temp-= (dashRect.width-adjust);
          } else {
            adjust = (temp%dashRect.width)/2;
            // draw in the left and right
            aContext.FillRect(borderOutside.x,dashRect.y,dashRect.width+adjust,dashRect.height);
            aContext.FillRect((borderOutside.XMost()-(dashRect.width+adjust)),dashRect.y,dashRect.width+adjust,dashRect.height);
            currRect.x += (dashRect.width+adjust);
            temp = temp-= (dashRect.width+adjust);
          }
       

          if( temp > xwidth)
            temp = xwidth;

          // get the currRect's x into the view before we start
          if( currRect.x < aDirtyRect.x){
            temp1 = NSToCoordFloor((float)((aDirtyRect.x-currRect.x)/dashRect.width));
            currRect.x += temp1*dashRect.width;
            if((temp1%2)==1){
              bSolid = PR_TRUE;
            }
          }

          while(currRect.x<temp) {
            //draw if necessary
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            bSolid = PRBool(!bSolid);
            currRect.x += dashRect.width;
          }
        }
      break;
      }
    }
    skippedSide = PR_FALSE;
  }
}

/* draw the portions of the border described in aBorderEdges that are dashed.
 * a border has 4 edges.  Each edge has 1 or more segments. 
 * "inside edges" are drawn differently than "outside edges" so the shared edges will match up.
 * in the case of table collapsing borders, the table edge is the "outside" edge and
 * cell edges are always "inside" edges (so adjacent cells have 2 shared "inside" edges.)
 * There is a case for each of the four sides.  Only the left side is well documented.  The others
 * are very similar.
 */
// XXX: doesn't do corners or junctions well at all.  Just uses logic stolen 
//      from DrawDashedSides which is insufficient
void nsCSSRendering::DrawDashedSegments(nsIRenderingContext& aContext,
                                        const nsRect& aBounds,
                                        nsBorderEdges * aBorderEdges,
                                        PRIntn aSkipSides,
                                        nsRect* aGap)
{
PRIntn dashLength;
nsRect dashRect, currRect;

PRBool  bSolid = PR_TRUE;
float   over = 0.0f;
PRBool  skippedSide = PR_FALSE;
PRIntn  whichSide=0;


  // do this just to set up initial condition for loop
  // "segment" is the current portion of the edge we are computing
  nsBorderEdge * segment =  (nsBorderEdge *)(aBorderEdges->mEdges[whichSide].ElementAt(0));
  PRUint8 style = segment->mStyle;  
  for ( ; whichSide < 4; whichSide++) 
  {
    if ((1<<whichSide) & aSkipSides) {
      // Skipped side
      skippedSide = PR_TRUE;
      continue;
    }
    nscoord x=0;  nscoord y=0;
    PRInt32 i;
    PRInt32 segmentCount = aBorderEdges->mEdges[whichSide].Count();
    nsBorderEdges * neighborBorderEdges=nsnull;
    PRIntn neighborEdgeCount=0; // keeps track of which inside neighbor is shared with an outside segment
    for (i=0; i<segmentCount; i++)
    {
      bSolid=PR_TRUE;
      over = 0.0f;
      segment =  (nsBorderEdge *)(aBorderEdges->mEdges[whichSide].ElementAt(i));
      style = segment->mStyle;

      // XXX units for dash & dot?
      if (style == NS_STYLE_BORDER_STYLE_DASHED) {
        dashLength = DASH_LENGTH;
      } else {
        dashLength = DOT_LENGTH;
      }

      aContext.SetColor(segment->mColor);  
      switch (whichSide) {
      case NS_SIDE_LEFT:
      { // draw left segment i
        nsBorderEdge * topEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_TOP].ElementAt(0));
        if (0==y)
        { // y is the offset to the top of this segment.  0 means its the topmost left segment
          y = aBorderEdges->mMaxBorderWidth.top - topEdge->mWidth;
          if (PR_TRUE==aBorderEdges->mOutsideEdge)
            y += topEdge->mWidth;
        }
        // the x offset is the x position offset by the max width of the left edge minus this segment's width
        x = aBounds.x + (aBorderEdges->mMaxBorderWidth.left - segment->mWidth);
        nscoord height = segment->mLength;
        // the space between borderOutside and borderInside inclusive is the segment.
        nsRect borderOutside(x, y, aBounds.width, height);
        y += segment->mLength;  // keep track of the y offset for the next segment
        if ((style == NS_STYLE_BORDER_STYLE_DASHED) ||
            (style == NS_STYLE_BORDER_STYLE_DOTTED))
        {
          nsRect borderInside(borderOutside);
          nsMargin outsideMargin(segment->mWidth, 0, 0, 0);
          borderInside.Deflate(outsideMargin);
          nscoord totalLength = segment->mLength; // the computed length of this segment
          // outside edges need info from their inside neighbor.  The following code keeps track
          // of which segment of the inside neighbor's shared edge we should use for this outside segment
          if (PR_TRUE==aBorderEdges->mOutsideEdge)
          {
            if (segment->mInsideNeighbor == neighborBorderEdges)
            {
              neighborEdgeCount++;
            }
            else 
            {
              neighborBorderEdges = segment->mInsideNeighbor;
              neighborEdgeCount=0;
            }
            nsBorderEdge * neighborLeft = (nsBorderEdge *)(segment->mInsideNeighbor->mEdges[NS_SIDE_LEFT].ElementAt(neighborEdgeCount));
            totalLength = neighborLeft->mLength;
          }
          dashRect.width = borderInside.x - borderOutside.x;
          dashRect.height = nscoord(dashRect.width * dashLength);
          dashRect.x = borderOutside.x;
          dashRect.y = borderOutside.y + (totalLength/2) - dashRect.height;
          if ((PR_TRUE==aBorderEdges->mOutsideEdge) && (0!=i))
            dashRect.y -= topEdge->mWidth;  // account for the topmost left edge corner with the leftmost top edge
          if (0)
          {
            printf("  L: totalLength = %d, borderOutside.y = %d, midpoint %d, dashRect.y = %d\n", 
            totalLength, borderOutside.y, borderOutside.y +(totalLength/2), dashRect.y); 
          }
          currRect = dashRect;

          // we draw the segment in 2 halves to get the inside and outside edges to line up on the
          // centerline of the shared edge.

          // draw the top half
          while (currRect.YMost() > borderInside.y) {
            //clip if necessary
            if (currRect.y < borderInside.y) {
              over = float(borderInside.y - dashRect.y) /
                float(dashRect.height);
              currRect.height = currRect.height - (borderInside.y - currRect.y);
              currRect.y = borderInside.y;
            }

            //draw if necessary
            if (0)
            {
              printf("DASHED LEFT: xywh in loop currRect = %d %d %d %d %s\n", 
                   currRect.x, currRect.y, currRect.width, currRect.height, bSolid?"TRUE":"FALSE");
            }
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            //setup for next iteration
            if (over == 0.0f) {
              bSolid = PRBool(!bSolid);
            }
            dashRect.y = dashRect.y - currRect.height;
            currRect = dashRect;
          }

          // draw the bottom half
          dashRect.y = borderOutside.y + (totalLength/2) + dashRect.height;
          if ((PR_TRUE==aBorderEdges->mOutsideEdge) && (0!=i))
            dashRect.y -= topEdge->mWidth;
          currRect = dashRect;
          bSolid=PR_TRUE;
          over = 0.0f;
          while (currRect.YMost() < borderInside.YMost()) {
            //clip if necessary
            if (currRect.y < borderInside.y) {
              over = float(borderInside.y - dashRect.y) /
                float(dashRect.height);
              currRect.height = currRect.height - (borderInside.y - currRect.y);
              currRect.y = borderInside.y;
            }

            //draw if necessary
            if (0)
            {
              printf("DASHED LEFT: xywh in loop currRect = %d %d %d %d %s\n", 
                   currRect.x, currRect.y, currRect.width, currRect.height, bSolid?"TRUE":"FALSE");
            }
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            //setup for next iteration
            if (over == 0.0f) {
              bSolid = PRBool(!bSolid);
            }
            dashRect.y = dashRect.y + currRect.height;
            currRect = dashRect;
          }
        }
      }
      break;

      case NS_SIDE_TOP:
      { // draw top segment i
        if (0==x)
        {
          nsBorderEdge * leftEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(0));
          x = aBorderEdges->mMaxBorderWidth.left - leftEdge->mWidth;
        }
        y = aBounds.y;
        if (PR_TRUE==aBorderEdges->mOutsideEdge) // segments of the outside edge are bottom-aligned
          y += aBorderEdges->mMaxBorderWidth.top - segment->mWidth;
        nsRect borderOutside(x, y, segment->mLength, aBounds.height);
        x += segment->mLength;
        if ((style == NS_STYLE_BORDER_STYLE_DASHED) ||
            (style == NS_STYLE_BORDER_STYLE_DOTTED))
        {
          nsRect borderInside(borderOutside);
          nsBorderEdge * neighbor;
          if (PR_TRUE==aBorderEdges->mOutsideEdge)
            neighbor = (nsBorderEdge *)(segment->mInsideNeighbor->mEdges[NS_SIDE_LEFT].ElementAt(0));
          else
            neighbor = (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(0));
          nsMargin outsideMargin(neighbor->mWidth, segment->mWidth, 0, segment->mWidth);
          borderInside.Deflate(outsideMargin);
          nscoord firstRectWidth = 0;
          if (PR_TRUE==aBorderEdges->mOutsideEdge && 0==i)
          {
            firstRectWidth = borderInside.x - borderOutside.x;
            aContext.FillRect(borderOutside.x, borderOutside.y,
                              firstRectWidth,
                              borderInside.y - borderOutside.y);
          }

          dashRect.height = borderInside.y - borderOutside.y;
          dashRect.width = dashRect.height * dashLength;
          dashRect.x = borderOutside.x + firstRectWidth;
          dashRect.y = borderOutside.y;
          currRect = dashRect;

          while (currRect.x < borderInside.XMost()) {
            //clip if necessary
            if (currRect.XMost() > borderInside.XMost()) {
              over = float(dashRect.XMost() - borderInside.XMost()) /
                float(dashRect.width);
              currRect.width = currRect.width -
                (currRect.XMost() - borderInside.XMost());
            }

            //draw if necessary
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            //setup for next iteration
            if (over == 0.0f) {
              bSolid = PRBool(!bSolid);
            }
            dashRect.x = dashRect.x + currRect.width;
            currRect = dashRect;
          }
        }
      }
      break;

      case NS_SIDE_RIGHT:
      { // draw right segment i
        nsBorderEdge * topEdge =  (nsBorderEdge *)
            (aBorderEdges->mEdges[NS_SIDE_TOP].ElementAt(aBorderEdges->mEdges[NS_SIDE_TOP].Count()-1));
        if (0==y)
        {
          y = aBorderEdges->mMaxBorderWidth.top - topEdge->mWidth;
          if (PR_TRUE==aBorderEdges->mOutsideEdge)
            y += topEdge->mWidth;
        }
        nscoord width;
        if (PR_TRUE==aBorderEdges->mOutsideEdge)
        {
          width = aBounds.width - aBorderEdges->mMaxBorderWidth.right;
          width += segment->mWidth;
        }
	      else
        {
          width = aBounds.width;
        }
        nscoord height = segment->mLength;
        nsRect borderOutside(aBounds.x, y, width, height);
        y += segment->mLength;
        if ((style == NS_STYLE_BORDER_STYLE_DASHED) ||
            (style == NS_STYLE_BORDER_STYLE_DOTTED))
        {
          nsRect borderInside(borderOutside);
          nsMargin outsideMargin(segment->mWidth, 0, (segment->mWidth), 0);
          borderInside.Deflate(outsideMargin);
          nscoord totalLength = segment->mLength;
          if (PR_TRUE==aBorderEdges->mOutsideEdge)
          {
            if (segment->mInsideNeighbor == neighborBorderEdges)
            {
              neighborEdgeCount++;
            }
            else 
            {
              neighborBorderEdges = segment->mInsideNeighbor;
              neighborEdgeCount=0;
            }
			      nsBorderEdge * neighborRight = (nsBorderEdge *)(segment->mInsideNeighbor->mEdges[NS_SIDE_RIGHT].ElementAt(neighborEdgeCount));
            totalLength = neighborRight->mLength;
          }
          dashRect.width = borderOutside.XMost() - borderInside.XMost();
          dashRect.height = nscoord(dashRect.width * dashLength);
          dashRect.x = borderInside.XMost();
          dashRect.y = borderOutside.y + (totalLength/2) - dashRect.height;
          if ((PR_TRUE==aBorderEdges->mOutsideEdge) && (0!=i))
            dashRect.y -= topEdge->mWidth;
		      currRect = dashRect;

          // draw the top half
          while (currRect.YMost() > borderInside.y) {
            //clip if necessary
            if (currRect.y < borderInside.y) {
              over = float(borderInside.y - dashRect.y) /
                float(dashRect.height);
              currRect.height = currRect.height - (borderInside.y - currRect.y);
              currRect.y = borderInside.y;
            }

            //draw if necessary
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            //setup for next iteration
            if (over == 0.0f) {
              bSolid = PRBool(!bSolid);
            }
            dashRect.y = dashRect.y - currRect.height;
            currRect = dashRect;
          }

          // draw the bottom half
          dashRect.y = borderOutside.y + (totalLength/2) + dashRect.height;
          if ((PR_TRUE==aBorderEdges->mOutsideEdge) && (0!=i))
            dashRect.y -= topEdge->mWidth;
          currRect = dashRect;
          bSolid=PR_TRUE;
          over = 0.0f;
          while (currRect.YMost() < borderInside.YMost()) {
            //clip if necessary
            if (currRect.y < borderInside.y) {
              over = float(borderInside.y - dashRect.y) /
                float(dashRect.height);
              currRect.height = currRect.height - (borderInside.y - currRect.y);
              currRect.y = borderInside.y;
            }

            //draw if necessary
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            //setup for next iteration
            if (over == 0.0f) {
              bSolid = PRBool(!bSolid);
            }
            dashRect.y = dashRect.y + currRect.height;
            currRect = dashRect;
          }

        }
      }
      break;

      case NS_SIDE_BOTTOM:
      {  // draw bottom segment i
        if (0==x)
        {
          nsBorderEdge * leftEdge =  (nsBorderEdge *)
            (aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(aBorderEdges->mEdges[NS_SIDE_LEFT].Count()-1));
          x = aBorderEdges->mMaxBorderWidth.left - leftEdge->mWidth;
        }
        y = aBounds.y;
        if (PR_TRUE==aBorderEdges->mOutsideEdge) // segments of the outside edge are top-aligned
          y -= aBorderEdges->mMaxBorderWidth.bottom - segment->mWidth;
        nsRect borderOutside(x, y, segment->mLength, aBounds.height);
        x += segment->mLength;
        if ((style == NS_STYLE_BORDER_STYLE_DASHED) ||
            (style == NS_STYLE_BORDER_STYLE_DOTTED))
        {
          nsRect borderInside(borderOutside);
          nsBorderEdge * neighbor;
          if (PR_TRUE==aBorderEdges->mOutsideEdge)
            neighbor = (nsBorderEdge *)(segment->mInsideNeighbor->mEdges[NS_SIDE_LEFT].ElementAt(0));
          else
            neighbor = (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(0));
          nsMargin outsideMargin(neighbor->mWidth, segment->mWidth, 0, segment->mWidth);
          borderInside.Deflate(outsideMargin);
          nscoord firstRectWidth = 0;
          if (PR_TRUE==aBorderEdges->mOutsideEdge  &&  0==i)
          {
            firstRectWidth = borderInside.x - borderOutside.x;
            aContext.FillRect(borderOutside.x, borderInside.YMost(),
                              firstRectWidth,
                              borderOutside.YMost() - borderInside.YMost());
          }

          dashRect.height = borderOutside.YMost() - borderInside.YMost();
          dashRect.width = nscoord(dashRect.height * dashLength);
          dashRect.x = borderOutside.x + firstRectWidth;
          dashRect.y = borderInside.YMost();
          currRect = dashRect;

          while (currRect.x < borderInside.XMost()) {
            //clip if necessary
            if (currRect.XMost() > borderInside.XMost()) {
              over = float(dashRect.XMost() - borderInside.XMost()) / 
                float(dashRect.width);
              currRect.width = currRect.width -
                (currRect.XMost() - borderInside.XMost());
            }

            //draw if necessary
            if (bSolid) {
              aContext.FillRect(currRect);
            }

            //setup for next iteration
            if (over == 0.0f) {
              bSolid = PRBool(!bSolid);
            }
            dashRect.x = dashRect.x + currRect.width;
            currRect = dashRect;
          }
        }
      }
      break;
      }
    }
    skippedSide = PR_FALSE;
  }
}

// XXX improve this to constrain rendering to the damaged area
void nsCSSRendering::PaintBorder(nsIPresContext* aPresContext,
                                 nsIRenderingContext& aRenderingContext,
                                 nsIFrame* aForFrame,
                                 const nsRect& aDirtyRect,
                                 const nsRect& aBorderArea,
                                 const nsStyleSpacing& aBorderStyle,
                                 nsIStyleContext* aStyleContext,
                                 PRIntn aSkipSides,
                                 nsRect* aGap,
                                 nscoord aHardBorderSize,
                                 PRBool  aShouldIgnoreRounded)
{
PRIntn              cnt;
nsMargin            border;
nsStyleCoord        bordStyleRadius[4];
PRInt16             borderRadii[4],i;
float               percent;
nsCompatibility     compatMode;
aPresContext->GetCompatibilityMode(&compatMode);
// in NavQuirks mode we want to use the parent's context as a starting point 
// for determining the background color
const nsStyleColor* bgColor = 
  nsStyleUtil::FindNonTransparentBackground(aStyleContext, 
                                            compatMode == eCompatibility_NavQuirks ? PR_TRUE : PR_FALSE); 

  if (aHardBorderSize > 0) {
    border.SizeTo(aHardBorderSize, aHardBorderSize, aHardBorderSize, aHardBorderSize);
  } else {
    aBorderStyle.CalcBorderFor(aForFrame, border);
  }
  if ((0 == border.left) && (0 == border.right) &&
      (0 == border.top) && (0 == border.bottom)) {
    // Empty border area
    return;
  }


  // get the radius for our border
  aBorderStyle.mBorderRadius.GetTop(bordStyleRadius[0]);      //topleft
  aBorderStyle.mBorderRadius.GetRight(bordStyleRadius[1]);    //topright
  aBorderStyle.mBorderRadius.GetBottom(bordStyleRadius[2]);   //bottomright
  aBorderStyle.mBorderRadius.GetLeft(bordStyleRadius[3]);     //bottomleft

  for(i=0;i<4;i++) {
    borderRadii[i] = 0;
    switch ( bordStyleRadius[i].GetUnit()) {
    case eStyleUnit_Inherit:
      break;
    case eStyleUnit_Percent:
      percent = bordStyleRadius[i].GetPercentValue();
      borderRadii[i] = (nscoord)(percent * aBorderArea.width);
      break;
    case eStyleUnit_Coord:
      borderRadii[i] = bordStyleRadius[i].GetCoordValue();
      break;
    default:
      break;
    }
  }

  // rounded version of the outline
  // check for any corner that is rounded
  for(i=0;i<4;i++){
    if(borderRadii[i] > 0){
      PaintRoundedBorder(aPresContext,aRenderingContext,aForFrame,aDirtyRect,aBorderArea,aBorderStyle,aStyleContext,aSkipSides,borderRadii,aGap,PR_FALSE);
      return;
    }
  }

  // Turn off rendering for all of the zero sized sides
  if (0 == border.top) aSkipSides |= (1 << NS_SIDE_TOP);
  if (0 == border.right) aSkipSides |= (1 << NS_SIDE_RIGHT);
  if (0 == border.bottom) aSkipSides |= (1 << NS_SIDE_BOTTOM);
  if (0 == border.left) aSkipSides |= (1 << NS_SIDE_LEFT);

  // XXX These are misnamed. Why is it that 'outside' is inside of
  // 'inside' (it's produced by deflating)?
  nsRect inside(aBorderArea);
  nsRect outside(inside);
  outside.Deflate(border);

  // If the dirty rect is completely inside the border area (e.g., only the
  // content is being painted), then we can skip out now
  if (outside.Contains(aDirtyRect)) {
    return;
  }
 
  //see if any sides are dotted or dashed
  for (cnt = 0; cnt < 4; cnt++) {
    if ((aBorderStyle.GetBorderStyle(cnt) == NS_STYLE_BORDER_STYLE_DOTTED) || 
        (aBorderStyle.GetBorderStyle(cnt) == NS_STYLE_BORDER_STYLE_DASHED))  {
      break;
    }
  }
  if (cnt < 4) {
    DrawDashedSides(cnt, aRenderingContext,aDirtyRect,aBorderStyle, PR_FALSE,
                    inside, outside, aSkipSides, aGap);
  }

  // Draw all the other sides

  /* Get our conversion values */
  nscoord twipsPerPixel;
  float p2t;
  aPresContext->GetScaledPixelsToTwips(&p2t);
  twipsPerPixel = NSIntPixelsToTwips(1,p2t);


  nscolor sideColor;
  if (0 == (aSkipSides & (1<<NS_SIDE_BOTTOM))) {
    if (aBorderStyle.GetBorderColor(NS_SIDE_BOTTOM, sideColor)) {
      DrawSide(aRenderingContext, NS_SIDE_BOTTOM,
               aBorderStyle.GetBorderStyle(NS_SIDE_BOTTOM),
               sideColor,
               bgColor->mBackgroundColor, inside,outside, aSkipSides,
               twipsPerPixel, aGap);
    }
  }
  if (0 == (aSkipSides & (1<<NS_SIDE_LEFT))) {
    if (aBorderStyle.GetBorderColor(NS_SIDE_LEFT, sideColor)) {
      DrawSide(aRenderingContext, NS_SIDE_LEFT,
               aBorderStyle.GetBorderStyle(NS_SIDE_LEFT), 
               sideColor,
               bgColor->mBackgroundColor,inside, outside,aSkipSides,
               twipsPerPixel, aGap);
    }
  }
  if (0 == (aSkipSides & (1<<NS_SIDE_TOP))) {
    if (aBorderStyle.GetBorderColor(NS_SIDE_TOP, sideColor)) {
      DrawSide(aRenderingContext, NS_SIDE_TOP,
               aBorderStyle.GetBorderStyle(NS_SIDE_TOP),
               sideColor,
			   bgColor->mBackgroundColor,inside, outside,aSkipSides,
			   twipsPerPixel, aGap);
    }
  }
  if (0 == (aSkipSides & (1<<NS_SIDE_RIGHT))) {
    if (aBorderStyle.GetBorderColor(NS_SIDE_RIGHT, sideColor)) {
      DrawSide(aRenderingContext, NS_SIDE_RIGHT,
               aBorderStyle.GetBorderStyle(NS_SIDE_RIGHT),
               sideColor,
      			   bgColor->mBackgroundColor,inside, outside,aSkipSides,
			         twipsPerPixel, aGap);
    }
  }
}

// XXX improve this to constrain rendering to the damaged area
void nsCSSRendering::PaintOutline(nsIPresContext* aPresContext,
                                 nsIRenderingContext& aRenderingContext,
                                 nsIFrame* aForFrame,
                                 const nsRect& aDirtyRect,
                                 const nsRect& aBorderArea,
                                 const nsStyleSpacing& aBorderStyle,
                                 nsIStyleContext* aStyleContext,
                                 PRIntn aSkipSides,
                                 nsRect* aGap)
{
nsStyleCoord        bordStyleRadius[4];
PRInt16             borderRadii[4],i;
float               percent;
const nsStyleColor* bgColor = nsStyleUtil::FindNonTransparentBackground(aStyleContext);
nscoord width;


  aBorderStyle.GetOutlineWidth(width);

  if (0 == width) {
    // Empty outline
    return;
  }

  // get the radius for our border
  aBorderStyle.mOutlineRadius.GetTop(bordStyleRadius[0]);      //topleft
  aBorderStyle.mOutlineRadius.GetRight(bordStyleRadius[1]);    //topright
  aBorderStyle.mOutlineRadius.GetBottom(bordStyleRadius[2]);   //bottomright
  aBorderStyle.mOutlineRadius.GetLeft(bordStyleRadius[3]);     //bottomleft

  for(i=0;i<4;i++) {
    borderRadii[i] = 0;
    switch ( bordStyleRadius[i].GetUnit()) {
    case eStyleUnit_Inherit:
      break;
    case eStyleUnit_Percent:
      percent = bordStyleRadius[i].GetPercentValue();
      borderRadii[i] = (nscoord)(percent * aBorderArea.width);
      break;
    case eStyleUnit_Coord:
      borderRadii[i] = bordStyleRadius[i].GetCoordValue();
      break;
    default:
      break;
    }
  }


  nsRect inside(aBorderArea);
  nsRect outside(inside);
  inside.Inflate(width, width);

  nsRect clipRect(aBorderArea);
  clipRect.Inflate(width, width); // make clip extra big for now

  PRBool clipState = PR_FALSE;
  aRenderingContext.PushState();
  aRenderingContext.SetClipRect(clipRect, nsClipCombine_kReplace, clipState);

  // rounded version of the border
  for(i=0;i<4;i++){
    if(borderRadii[i] > 0){
      PaintRoundedBorder(aPresContext,aRenderingContext,aForFrame,aDirtyRect,aBorderArea,aBorderStyle,aStyleContext,aSkipSides,borderRadii,aGap,PR_TRUE);
      return;
    }
  }


  PRUint8 outlineStyle = aBorderStyle.GetOutlineStyle();
  //see if any sides are dotted or dashed
  if ((outlineStyle == NS_STYLE_BORDER_STYLE_DOTTED) || 
      (outlineStyle == NS_STYLE_BORDER_STYLE_DASHED))  {
    DrawDashedSides(0, aRenderingContext, aDirtyRect, aBorderStyle, PR_TRUE,
                    inside, outside, aSkipSides, aGap);
    aRenderingContext.PopState(clipState);
    return;
  }

  // Draw all the other sides

  /* XXX something is misnamed here!!!! */
  nscoord twipsPerPixel;/* XXX */
  float p2t;/* XXX */
  aPresContext->GetPixelsToTwips(&p2t);/* XXX */
  twipsPerPixel = (nscoord) p2t;/* XXX */

  nscolor outlineColor;

  if (aBorderStyle.GetOutlineColor(outlineColor)) {
    DrawSide(aRenderingContext, NS_SIDE_BOTTOM,
             outlineStyle,
             outlineColor,
             bgColor->mBackgroundColor, inside,outside, aSkipSides,
             twipsPerPixel, aGap);

    DrawSide(aRenderingContext, NS_SIDE_LEFT,
             outlineStyle, 
             outlineColor,
             bgColor->mBackgroundColor,inside, outside,aSkipSides,
             twipsPerPixel, aGap);

    DrawSide(aRenderingContext, NS_SIDE_TOP,
             outlineStyle,
             outlineColor,
			       bgColor->mBackgroundColor,inside, outside,aSkipSides,
			       twipsPerPixel, aGap);

    DrawSide(aRenderingContext, NS_SIDE_RIGHT,
             outlineStyle,
             outlineColor,
      			 bgColor->mBackgroundColor,inside, outside,aSkipSides,
			       twipsPerPixel, aGap);
  }
  // Restore clipping
  aRenderingContext.PopState(clipState);
}

/* draw the edges of the border described in aBorderEdges one segment at a time.
 * a border has 4 edges.  Each edge has 1 or more segments. 
 * "inside edges" are drawn differently than "outside edges" so the shared edges will match up.
 * in the case of table collapsing borders, the table edge is the "outside" edge and
 * cell edges are always "inside" edges (so adjacent cells have 2 shared "inside" edges.)
 * dashed segments are drawn by DrawDashedSegments().
 */
// XXX: doesn't do corners or junctions well at all.  Just uses logic stolen 
//      from PaintBorder which is insufficient

void nsCSSRendering::PaintBorderEdges(nsIPresContext* aPresContext,
                                      nsIRenderingContext& aRenderingContext,
                                      nsIFrame* aForFrame,
                                      const nsRect& aDirtyRect,
                                      const nsRect& aBorderArea,
                                      nsBorderEdges * aBorderEdges,
                                      nsIStyleContext* aStyleContext,
                                      PRIntn aSkipSides,
                                      nsRect* aGap)
{
  const nsStyleColor* bgColor = nsStyleUtil::FindNonTransparentBackground(aStyleContext);
  
  if (nsnull==aBorderEdges) {  // Empty border segments
    return;
  }

  // Turn off rendering for all of the zero sized sides
  if (0 == aBorderEdges->mMaxBorderWidth.top) 
    aSkipSides |= (1 << NS_SIDE_TOP);
  if (0 == aBorderEdges->mMaxBorderWidth.right) 
    aSkipSides |= (1 << NS_SIDE_RIGHT);
  if (0 == aBorderEdges->mMaxBorderWidth.bottom) 
    aSkipSides |= (1 << NS_SIDE_BOTTOM);
  if (0 == aBorderEdges->mMaxBorderWidth.left) 
    aSkipSides |= (1 << NS_SIDE_LEFT);

  // Draw any dashed or dotted segments separately
  DrawDashedSegments(aRenderingContext, aBorderArea, aBorderEdges, aSkipSides, aGap);

  // Draw all the other sides
  nscoord twipsPerPixel;
  float p2t;
  aPresContext->GetPixelsToTwips(&p2t);
  twipsPerPixel = (nscoord) p2t;/* XXX huh!*/

  if (0 == (aSkipSides & (1<<NS_SIDE_TOP))) {
    PRInt32 segmentCount = aBorderEdges->mEdges[NS_SIDE_TOP].Count();
    PRInt32 i;
    nsBorderEdge * leftEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(0));
    nscoord x = aBorderEdges->mMaxBorderWidth.left - leftEdge->mWidth;
    for (i=0; i<segmentCount; i++)
    {
      nsBorderEdge * borderEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_TOP].ElementAt(i));
      nscoord y = aBorderArea.y;
      if (PR_TRUE==aBorderEdges->mOutsideEdge) // segments of the outside edge are bottom-aligned
        y += aBorderEdges->mMaxBorderWidth.top - borderEdge->mWidth;
      nsRect inside(x, y, borderEdge->mLength, aBorderArea.height);
      x += borderEdge->mLength;
      nsRect outside(inside);
      nsMargin outsideMargin(0, borderEdge->mWidth, 0, 0);
      outside.Deflate(outsideMargin);
      DrawSide(aRenderingContext, NS_SIDE_TOP,
               borderEdge->mStyle,
               borderEdge->mColor,
               bgColor->mBackgroundColor,
               inside, outside,aSkipSides,
               twipsPerPixel, aGap);
    }
  }
  if (0 == (aSkipSides & (1<<NS_SIDE_LEFT))) {
    PRInt32 segmentCount = aBorderEdges->mEdges[NS_SIDE_LEFT].Count();
    PRInt32 i;
    nsBorderEdge * topEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_TOP].ElementAt(0));
    nscoord y = aBorderEdges->mMaxBorderWidth.top - topEdge->mWidth;
    for (i=0; i<segmentCount; i++)
    {
      nsBorderEdge * borderEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(i));
      nscoord x = aBorderArea.x + (aBorderEdges->mMaxBorderWidth.left - borderEdge->mWidth);
      nsRect inside(x, y, aBorderArea.width, borderEdge->mLength);
      y += borderEdge->mLength;
      nsRect outside(inside);
      nsMargin outsideMargin(borderEdge->mWidth, 0, 0, 0);
      outside.Deflate(outsideMargin);
      DrawSide(aRenderingContext, NS_SIDE_LEFT,
               borderEdge->mStyle,
               borderEdge->mColor,
               bgColor->mBackgroundColor,
               inside, outside, aSkipSides,
               twipsPerPixel, aGap);
    }
  }
  if (0 == (aSkipSides & (1<<NS_SIDE_BOTTOM))) {
    PRInt32 segmentCount = aBorderEdges->mEdges[NS_SIDE_BOTTOM].Count();
    PRInt32 i;
    nsBorderEdge * leftEdge =  (nsBorderEdge *)
      (aBorderEdges->mEdges[NS_SIDE_LEFT].ElementAt(aBorderEdges->mEdges[NS_SIDE_LEFT].Count()-1));
    nscoord x = aBorderEdges->mMaxBorderWidth.left - leftEdge->mWidth;
    for (i=0; i<segmentCount; i++)
    {
      nsBorderEdge * borderEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_BOTTOM].ElementAt(i));
      nscoord y = aBorderArea.y;
      if (PR_TRUE==aBorderEdges->mOutsideEdge) // segments of the outside edge are top-aligned
        y -= (aBorderEdges->mMaxBorderWidth.bottom - borderEdge->mWidth);
      nsRect inside(x, y, borderEdge->mLength, aBorderArea.height);
      x += borderEdge->mLength;
      nsRect outside(inside);
      nsMargin outsideMargin(0, 0, 0, borderEdge->mWidth);
      outside.Deflate(outsideMargin);
      DrawSide(aRenderingContext, NS_SIDE_BOTTOM,
               borderEdge->mStyle,
               borderEdge->mColor,
               bgColor->mBackgroundColor,
               inside, outside,aSkipSides,
               twipsPerPixel, aGap);
    }
  }
  if (0 == (aSkipSides & (1<<NS_SIDE_RIGHT))) {
    PRInt32 segmentCount = aBorderEdges->mEdges[NS_SIDE_RIGHT].Count();
    PRInt32 i;
    nsBorderEdge * topEdge =  (nsBorderEdge *)
      (aBorderEdges->mEdges[NS_SIDE_TOP].ElementAt(aBorderEdges->mEdges[NS_SIDE_TOP].Count()-1));
    nscoord y = aBorderEdges->mMaxBorderWidth.top - topEdge->mWidth;
    for (i=0; i<segmentCount; i++)
    {
      nsBorderEdge * borderEdge =  (nsBorderEdge *)(aBorderEdges->mEdges[NS_SIDE_RIGHT].ElementAt(i));
      nscoord width;
      if (PR_TRUE==aBorderEdges->mOutsideEdge)
      {
        width = aBorderArea.width - aBorderEdges->mMaxBorderWidth.right;
        width += borderEdge->mWidth;
      }
	    else
      {
        width = aBorderArea.width;
      }
      nsRect inside(aBorderArea.x, y, width, borderEdge->mLength);
      y += borderEdge->mLength;
      nsRect outside(inside);
      nsMargin outsideMargin(0, 0, (borderEdge->mWidth), 0);
      outside.Deflate(outsideMargin);
      DrawSide(aRenderingContext, NS_SIDE_RIGHT,
               borderEdge->mStyle,
               borderEdge->mColor,
               bgColor->mBackgroundColor,
               inside, outside,aSkipSides,
               twipsPerPixel, aGap);
    }
  }
}


//----------------------------------------------------------------------

// Returns the anchor point to use for the background image. The
// anchor point is the (x, y) location where the first tile should
// be placed
//
// For repeated tiling, the anchor values are normalized wrt to the upper-left
// edge of the bounds, and are always in the range:
// -(aTileWidth - 1) <= anchor.x <= 0
// -(aTileHeight - 1) <= anchor.y <= 0
//
// i.e., they are either 0 or a negative number whose absolute value is
// less than the tile size in that dimension
static void
ComputeBackgroundAnchorPoint(const nsStyleColor& aColor,
                             const nsRect& aBounds,
                             nscoord aTileWidth, nscoord aTileHeight,
                             nsPoint& aResult)
{
  nscoord x;
  if (NS_STYLE_BG_X_POSITION_LENGTH & aColor.mBackgroundFlags) {
    x = aColor.mBackgroundXPosition;
  }
  else {
    nscoord t = aColor.mBackgroundXPosition;
    float pct = float(t) / 100.0f;
    nscoord tilePos = nscoord(pct * aTileWidth);
    nscoord boxPos = nscoord(pct * aBounds.width);
    x = boxPos - tilePos;
  }
  if (NS_STYLE_BG_REPEAT_X & aColor.mBackgroundRepeat) {
    // When we are tiling in the x direction the loop will run from
    // the left edge of the box to the right edge of the box. We need
    // to adjust the starting coordinate to lie within the band being
    // rendered.
    if (x < 0) {
      x = -x;
      if (x < 0) {
        // Some joker gave us max-negative-integer.
        x = 0;
      }
      x %= aTileWidth;
      x = -x;
    }
    else if (x != 0) {
      x %= aTileWidth;
      if (x > 0) {
        x = x - aTileWidth;
      }
    }

    NS_POSTCONDITION((x >= -(aTileWidth - 1)) && (x <= 0), "bad computed anchor value");
  }
  aResult.x = x;

  nscoord y;
  if (NS_STYLE_BG_Y_POSITION_LENGTH & aColor.mBackgroundFlags) {
    y = aColor.mBackgroundYPosition;
  }
  else {
    nscoord t = aColor.mBackgroundYPosition;
    float pct = float(t) / 100.0f;
    nscoord tilePos = nscoord(pct * aTileHeight);
    nscoord boxPos = nscoord(pct * aBounds.height);
    y = boxPos - tilePos;
  }
  if (NS_STYLE_BG_REPEAT_Y & aColor.mBackgroundRepeat) {
    // When we are tiling in the y direction the loop will run from
    // the top edge of the box to the bottom edge of the box. We need
    // to adjust the starting coordinate to lie within the band being
    // rendered.
    if (y < 0) {
      y = -y;
      if (y < 0) {
        // Some joker gave us max-negative-integer.
        y = 0;
      }
      y %= aTileHeight;
      y = -y;
    }
    else if (y != 0) {
      y %= aTileHeight;
      if (y > 0) {
        y = y - aTileHeight;
      }
    }
    
    NS_POSTCONDITION((y >= -(aTileHeight - 1)) && (y <= 0), "bad computed anchor value");
  }
  aResult.y = y;
}

// Returns the clip view associated with the scroll frame's scrolling
// view
static const nsIView*
GetClipView(nsIPresContext* aPresContext, nsIFrame* aScrollFrame)
{
  nsIView*           view;
  nsIScrollableView* scrollingView;
  const nsIView*     clipView;

  // Get the scrolling view
  aScrollFrame->GetView(aPresContext, &view);
  view->QueryInterface(kScrollViewIID, (void**)&scrollingView);

  // Get the clip view
  scrollingView->GetClipView(&clipView);
  return clipView;
}

// Returns the nearest scroll frame ancestor
static nsIFrame*
GetNearestScrollFrame(nsIFrame* aFrame)
{
  for (nsIFrame* f = aFrame; f; f->GetParent(&f)) {
    nsIAtom*  frameType;
    
    // Is it a scroll frame?
    f->GetFrameType(&frameType);
    if (nsLayoutAtoms::scrollFrame == frameType) {
      NS_RELEASE(frameType);
      return f;
    }

    NS_IF_RELEASE(frameType);
  }

  return nsnull;
}

void
nsCSSRendering::PaintBackground(nsIPresContext* aPresContext,
                                nsIRenderingContext& aRenderingContext,
                                nsIFrame* aForFrame,
                                const nsRect& aDirtyRect,
                                const nsRect& aBorderArea,
                                const nsStyleColor& aColor,
                                const nsStyleSpacing& aSpacing,
                                nscoord aDX,
                                nscoord aDY)
{
//PRInt16       theRadius;
//nsStyleCoord  borderRadius;
PRBool        transparentBG = NS_STYLE_BG_COLOR_TRANSPARENT ==
                                (aColor.mBackgroundFlags & NS_STYLE_BG_COLOR_TRANSPARENT);
float         percent;
nsStyleCoord  bordStyleRadius[4];
PRInt16       borderRadii[4],i;

  if (0 < aColor.mBackgroundImage.Length()) {
    // Lookup the image
    nsSize imageSize;
    nsIImage* image = nsnull;
    nsIFrameImageLoader* loader = nsnull;
    nsresult rv = aPresContext->StartLoadImage(aColor.mBackgroundImage,
                                              transparentBG
                                              ? nsnull
                                              : &aColor.mBackgroundColor,
                                              nsnull,
                                              aForFrame, nsnull, nsnull,
                                              &loader);
    if ((NS_OK != rv) || (nsnull == loader) ||
        (loader->GetImage(&image), (nsnull == image))) {
      NS_IF_RELEASE(loader);
      // Redraw will happen later
      if (!transparentBG) {
        // The background color is rendered over the 'border' 'padding' and
        // 'content' areas
        aRenderingContext.SetColor(aColor.mBackgroundColor);
        aRenderingContext.FillRect(aBorderArea);
      }
      return;
    }
    loader->GetSize(imageSize);
    NS_RELEASE(loader);

    // Background images are tiled over the 'content' and 'padding' areas
    // only (not the 'border' area)
    nsRect    paddingArea(aBorderArea);
    nsMargin  border;

    if (!aSpacing.GetBorder(border)) {
      NS_NOTYETIMPLEMENTED("percentage border");
    }
    paddingArea.Deflate(border);

    // The actual dirty rect is the intersection of the padding area and the
    // dirty rect we were given
    nsRect  dirtyRect;

    if (!dirtyRect.IntersectRect(paddingArea, aDirtyRect)) {
      // Nothing to paint
      return;
    }

    // Based on the repeat setting, compute how many tiles we should
    // lay down for each axis. The value computed is the maximum based
    // on the dirty rect before accounting for the background-position.
    nscoord tileWidth = imageSize.width;
    nscoord tileHeight = imageSize.height;
    PRBool  needBackgroundColor = PR_TRUE;
    PRIntn  repeat = aColor.mBackgroundRepeat;
    nscoord xDistance, yDistance;

    switch (repeat) {
    case NS_STYLE_BG_REPEAT_OFF:
    default:
      xDistance = tileWidth;
      yDistance = tileHeight;
      break;
    case NS_STYLE_BG_REPEAT_X:
      xDistance = dirtyRect.width;
      yDistance = tileHeight;
      break;
    case NS_STYLE_BG_REPEAT_Y:
      xDistance = tileWidth;
      yDistance = dirtyRect.height;
      break;
    case NS_STYLE_BG_REPEAT_XY:
      xDistance = dirtyRect.width;
      yDistance = dirtyRect.height;
      // We need to render the background color if the image is transparent
      needBackgroundColor = image->GetHasAlphaMask();
      break;
    }

    // The background color is rendered over the 'border' 'padding' and
    // 'content' areas
    if (!transparentBG && needBackgroundColor) {
      aRenderingContext.SetColor(aColor.mBackgroundColor);
      aRenderingContext.FillRect(aBorderArea);
    }

    // See if there's nothing left to do
    if ((tileWidth == 0) || (tileHeight == 0) || dirtyRect.IsEmpty()) {
      // Nothing to paint
      return;
    }

    // If it's a fixed background attachment, then get the nearest scrolling
    // ancestor
    const nsIView* viewportView = nsnull;
    nsRect         viewportArea(0, 0, 0, 0);

    if (NS_STYLE_BG_ATTACHMENT_FIXED == aColor.mBackgroundAttachment) {
      nsIFrame* scrollFrame = GetNearestScrollFrame(aForFrame);
      
      // Get the viewport size
      if (scrollFrame) {
        viewportView = GetClipView(aPresContext, scrollFrame);

      } else {
        // The viewport isn't scrollable, so use the root frame's view
        nsIPresShell*  presShell;
        nsIFrame*      rootFrame;

        aPresContext->GetShell(&presShell);
        presShell->GetRootFrame(&rootFrame);
        NS_RELEASE(presShell);
        rootFrame->GetView(aPresContext, (nsIView**)&viewportView);
      }

      NS_ASSERTION(viewportView, "no viewport view");
      viewportView->GetDimensions(&viewportArea.width, &viewportArea.height);
    }

    // Compute the anchor point. If it's a fixed background attachment, then
    // the image is placed relative to the viewport; otherwise, it's placed
    // relative to the element's padding area.
    //
    // When tiling, the anchor coordinate values will be negative offsets
    // from the padding area
    nsPoint anchor;
    ComputeBackgroundAnchorPoint(aColor, NS_STYLE_BG_ATTACHMENT_FIXED ==
                                 aColor.mBackgroundAttachment ? viewportArea : paddingArea,
                                 tileWidth, tileHeight, anchor);

    // If it's a fixed background attachment, then convert the anchor point
    // to aForFrame's coordinate space
    if (NS_STYLE_BG_ATTACHMENT_FIXED == aColor.mBackgroundAttachment) {
      nsIView*  view;

      aForFrame->GetView(aPresContext, &view);
      if (!view) {
        nsPoint offset;
        aForFrame->GetOffsetFromView(aPresContext, offset, &view);
        anchor -= offset;
      }
      NS_ASSERTION(view, "expected a view");
      while (view && (view != viewportView)) {
        nscoord x, y;

        view->GetPosition(&x, &y);
        anchor.x -= x;
        anchor.y -= y;

        // Get the parent view
        view->GetParent(view);
      }
    }

    // Setup clipping so that rendering doesn't leak out of the computed
    // dirty rect
    PRBool clipState;
    aRenderingContext.PushState();
    aRenderingContext.SetClipRect(dirtyRect, nsClipCombine_kIntersect,
                                  clipState);

    // Compute the x and y starting points and limits for tiling
    nscoord x0, x1;
    if (NS_STYLE_BG_ATTACHMENT_FIXED == aColor.mBackgroundAttachment) {
      if (NS_STYLE_BG_REPEAT_X & repeat) {
        x0 = ((dirtyRect.x - anchor.x) / tileWidth) * tileWidth + anchor.x;
        x1 = x0 + xDistance + tileWidth;
        if (0 != anchor.x) {
          x1 += tileWidth;
        }
      }
      else {
        // For fixed attachment, the anchor is relative to the nearest scrolling
        // ancestor (or the viewport)
        x0 = anchor.x;
        x1 = x0 + tileWidth;
      }
    }
    else {
      if (NS_STYLE_BG_REPEAT_X & repeat) {
        // When tiling in the x direction, adjust the starting position of the
        // tile to account for dirtyRect.x. When tiling in x, the anchor.x value
        // will be a negative value used to adjust the starting coordinate.
        x0 = (dirtyRect.x / tileWidth) * tileWidth + anchor.x;
        if(x0+tileWidth<dirtyRect.x)
          x0+=tileWidth;
        x1 = x0 + xDistance + tileWidth;
        if (0 != anchor.x) {
          x1 += tileWidth;
        }
      }
      else {
        // For scrolling attachment, the anchor is relative to the padding area
        x0 = paddingArea.x + anchor.x;
        x1 = x0 + tileWidth;
      }
    }

    nscoord y0, y1;
    if (NS_STYLE_BG_ATTACHMENT_FIXED == aColor.mBackgroundAttachment) {
      if (NS_STYLE_BG_REPEAT_Y & repeat) {
        y0 = ((dirtyRect.y - anchor.y) / tileHeight) * tileHeight + anchor.y;
        y1 = y0 + yDistance + tileHeight;
        if (0 != anchor.y) {
          y1 += tileHeight;
        }
      }
      else {
        // For fixed attachment, the anchor is relative to the nearest scrolling
        // ancestor (or the viewport)
        y0 = anchor.y;
        y1 = y0 + tileHeight;
      }
    }
    else {
      if (NS_STYLE_BG_REPEAT_Y & repeat) {
        // When tiling in the y direction, adjust the starting position of the
        // tile to account for dirtyRect.y. When tiling in y, the anchor.y value
        // will be a negative value used to adjust the starting coordinate.
        y0 = (dirtyRect.y / tileHeight) * tileHeight + anchor.y;
        if(y0+tileHeight<dirtyRect.y)
          y0+=tileHeight;
        y1 = y0 + yDistance + tileHeight;
        if (0 != anchor.y) {
          y1 += tileHeight;
        }
      }
      else {
        // For scrolling attachment, the anchor is relative to the padding area
        y0 = paddingArea.y + anchor.y;
        y1 = y0 + tileHeight;
      }
    }

#define DOTILE
#ifdef DOTILE
    nsIDrawingSurface  *theSurface,*ts=nsnull;
    nsRect              srcRect,destRect,vrect,tvrect;
    nscoord             x,y;
    PRInt32             flag = NS_COPYBITS_TO_BACK_BUFFER | NS_COPYBITS_XFORM_DEST_VALUES;
    PRUint32            dsFlag = 0;
    float               t2p,app2dev;
    PRBool              clip,hasMask;
    nsTransform2D       *theTransform;
    nsIDeviceContext    *theDevContext;


    aRenderingContext.GetDrawingSurface((void**)&theSurface);
    aPresContext->GetVisibleArea(srcRect);
    tvrect.SetRect(0,0,x1-x0,y1-y0);
    aPresContext->GetTwipsToPixels(&t2p);

    // check to see if the background image has a mask
    hasMask = image->GetHasAlphaMask();

    if(!hasMask &&  ((tileWidth<(tvrect.width/16)) || (tileHeight<(tvrect.height/16)))) {
      //tvrect.width /=4;
      //tvrect.height /=4;

      tvrect.width = ((tvrect.width)/tileWidth);  //total x number of tiles
      tvrect.width *=tileWidth;

      tvrect.height = ((tvrect.height)/tileHeight); //total y number of tiles
      tvrect.height *=tileHeight;

      // create a new drawing surface... using pixels as the size
      vrect.height = (nscoord)(tvrect.height * t2p);
      vrect.width = (nscoord)(tvrect.width * t2p);
      aRenderingContext.CreateDrawingSurface(&vrect,dsFlag,(nsDrawingSurface&)ts);
    }

    // did we need to create an offscreen drawing surface because the image was so small
    if(!hasMask && (nsnull != ts) ) {
      aRenderingContext.SelectOffScreenDrawingSurface(ts);

      // create a bigger tile in our new drawingsurface                    
      // XXX pushing state to fix clipping problem, need to look into why the clip is set here
      aRenderingContext.PushState();
      aRenderingContext.GetCurrentTransform(theTransform);
      aRenderingContext.GetDeviceContext(theDevContext);
      theDevContext->GetAppUnitsToDevUnits(app2dev);
      NS_RELEASE(theDevContext);
      theTransform->SetToIdentity();  
	    theTransform->AddScale(app2dev, app2dev);

      // XXX this #ifdef needs to go away when we are sure that this works on windows and mac
#ifdef XP_UNIX
      srcRect.SetRect(0,0,tvrect.width,tvrect.height);
      aRenderingContext.SetClipRect(srcRect, nsClipCombine_kReplace, clip);
#endif

      // copy the initial image to our buffer, this takes twips and converts to pixels.. 
      // which is what the image is in
      aRenderingContext.DrawImage(image,0,0,tileWidth,tileHeight);

      // duplicate the image in the upperleft corner to fill up the nsDrawingSurface
      srcRect.SetRect(0,0,tileWidth,tileHeight);
      TileImage(aRenderingContext,ts,srcRect,tvrect.width,tvrect.height);

      // setting back the clip from the background clip push
      aRenderingContext.PopState(clip);
    
      // set back to the old drawingsurface
      aRenderingContext.SelectOffScreenDrawingSurface((void**)theSurface);

     // now duplicate our tile into the background
      destRect = srcRect;
      for(y=y0;y<y1;y+=tvrect.height){
        for(x=x0;x<x1;x+=tvrect.width){
          destRect.x = x;
          destRect.y = y;
          aRenderingContext.CopyOffScreenBits(ts,0,0,destRect,flag);
        }
      } 

      aRenderingContext.DestroyDrawingSurface(ts);
    } else {
      // slow blitting, one tile at a time....
      for(y=y0;y<y1;y+=tileHeight){
        for(x=x0;x<x1;x+=tileWidth){
          aRenderingContext.DrawImage(image,x,y,tileWidth,tileHeight);
        }
      }
    }

#endif

//#define NOTNOW
#ifdef NOTNOW
    nscoord x,y;
    for(y=y0;y<y1;y+=tileHeight){
      for(x=x0;x<x1;x+=tileWidth){
        aRenderingContext.DrawImage(image,x,y,tileWidth,tileHeight);
      }
    }
#endif

    // Restore clipping
    aRenderingContext.PopState(clipState);
    NS_IF_RELEASE(image);
  } else {
    // See if there's a background color specified. The background color
    // is rendered over the 'border' 'padding' and 'content' areas
    if (!transparentBG) {


    // get the radius for our border
    aSpacing.mBorderRadius.GetTop(bordStyleRadius[0]);      //topleft
    aSpacing.mBorderRadius.GetRight(bordStyleRadius[1]);    //topright
    aSpacing.mBorderRadius.GetBottom(bordStyleRadius[2]);   //bottomright
    aSpacing.mBorderRadius.GetLeft(bordStyleRadius[3]);     //bottomleft

    for(i=0;i<4;i++) {
      borderRadii[i] = 0;
      switch ( bordStyleRadius[i].GetUnit()) {
        case eStyleUnit_Inherit:
          break;
        case eStyleUnit_Percent:
          percent = bordStyleRadius[i].GetPercentValue();
          borderRadii[i] = (nscoord)(percent * aBorderArea.width);
          break;
        case eStyleUnit_Coord:
          borderRadii[i] = bordStyleRadius[i].GetCoordValue();
          break;
        default:
          break;
      }
    }


      // rounded version of the border
      for(i=0;i<4;i++){
        if (borderRadii[i] > 0){
          PaintRoundedBackground(aPresContext,aRenderingContext,aForFrame,aDirtyRect,aBorderArea,aColor,aSpacing,aDX,aDY,borderRadii);
          return;
        }
      }

      aRenderingContext.SetColor(aColor.mBackgroundColor);
      aRenderingContext.FillRect(aBorderArea);
    }
  }

}

/** ---------------------------------------------------
 *  A bit blitter to tile images to the background recursively
 *	@update 4/13/99 dwc
 *  @param aRC -- Rendering Context to render to
 *  @param aDS -- Target drawing surface for the rendering context
 *  @param aSrcRect -- Rectangle we are build with the image
 *  @param aHeight -- height of the tile
 *  @param aWidth -- width of the tile
 */
static void
TileImage(nsIRenderingContext& aRC,nsDrawingSurface  aDS,nsRect &aSrcRect,PRInt16 aWidth,PRInt16 aHeight)
{
nsRect  destRect;
PRInt32 flag = NS_COPYBITS_TO_BACK_BUFFER | NS_COPYBITS_XFORM_DEST_VALUES;
  
  if( aSrcRect.width < aWidth) {
    // width is less than double so double our source bitmap width
    destRect = aSrcRect;
    destRect.x += aSrcRect.width;
    aRC.CopyOffScreenBits(aDS,aSrcRect.x,aSrcRect.y,destRect,flag);
    aSrcRect.width*=2; 
    TileImage(aRC,aDS,aSrcRect,aWidth,aHeight);
  } else if (aSrcRect.height < aHeight) {
    // height is less than double so double our source bitmap height
    destRect = aSrcRect;
    destRect.y += aSrcRect.height;
    aRC.CopyOffScreenBits(aDS,aSrcRect.x,aSrcRect.y,destRect,flag);
    aSrcRect.height*=2;
    TileImage(aRC,aDS,aSrcRect,aWidth,aHeight);
  } 
}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 3/26/99 dwc
 */
void
nsCSSRendering::PaintRoundedBackground(nsIPresContext* aPresContext,
                                nsIRenderingContext& aRenderingContext,
                                nsIFrame* aForFrame,
                                const nsRect& aDirtyRect,
                                const nsRect& aBorderArea,
                                const nsStyleColor& aColor,
                                const nsStyleSpacing& aSpacing,
                                nscoord aDX,
                                nscoord aDY,
                                PRInt16 aTheRadius[4])
{
RoundedRect   outerPath;
QBCurve       cr1,cr2,cr3,cr4;
QBCurve       UL,UR,LL,LR;
PRInt32       curIndex,c1Index;
nsPoint       thePath[MAXPATHSIZE];
nsPoint       polyPath[MAXPOLYPATHSIZE];
PRInt16       np;
nscoord       twipsPerPixel;
float         p2t;

  // needed for our border thickness
  aPresContext->GetPixelsToTwips(&p2t);
  twipsPerPixel = NSToCoordRound(p2t);

  aRenderingContext.SetColor(aColor.mBackgroundColor);

  // set the rounded rect up, and let'er rip
  outerPath.Set(aBorderArea.x,aBorderArea.y,aBorderArea.width,aBorderArea.height,aTheRadius,twipsPerPixel);
  outerPath.GetRoundedBorders(UL,UR,LL,LR);

  // BUILD THE ENTIRE OUTSIDE PATH
  // TOP LINE ----------------------------------------------------------------
  UL.MidPointDivide(&cr1,&cr2);
  UR.MidPointDivide(&cr3,&cr4);
  np=0;
  thePath[np++].MoveTo(cr2.mAnc1.x,cr2.mAnc1.y);
  thePath[np++].MoveTo(cr2.mCon.x, cr2.mCon.y);
  thePath[np++].MoveTo(cr2.mAnc2.x, cr2.mAnc2.y);
  thePath[np++].MoveTo(cr3.mAnc1.x, cr3.mAnc1.y);
  thePath[np++].MoveTo(cr3.mCon.x, cr3.mCon.y);
  thePath[np++].MoveTo(cr3.mAnc2.x, cr3.mAnc2.y);

  polyPath[0].x = thePath[0].x;
  polyPath[0].y = thePath[0].y;
  curIndex = 1;
  GetPath(thePath,polyPath,&curIndex,eOutside,c1Index);

  // RIGHT LINE ----------------------------------------------------------------
  LR.MidPointDivide(&cr2,&cr3);
  np=0;
  thePath[np++].MoveTo(cr4.mAnc1.x,cr4.mAnc1.y);
  thePath[np++].MoveTo(cr4.mCon.x, cr4.mCon.y);
  thePath[np++].MoveTo(cr4.mAnc2.x, cr4.mAnc2.y);
  thePath[np++].MoveTo(cr2.mAnc1.x, cr2.mAnc1.y);
  thePath[np++].MoveTo(cr2.mCon.x, cr2.mCon.y);
  thePath[np++].MoveTo(cr2.mAnc2.x, cr2.mAnc2.y);
  GetPath(thePath,polyPath,&curIndex,eOutside,c1Index);

  // BOTTOM LINE ----------------------------------------------------------------
  LL.MidPointDivide(&cr2,&cr4);
  np=0;
  thePath[np++].MoveTo(cr3.mAnc1.x,cr3.mAnc1.y);
  thePath[np++].MoveTo(cr3.mCon.x, cr3.mCon.y);
  thePath[np++].MoveTo(cr3.mAnc2.x, cr3.mAnc2.y);
  thePath[np++].MoveTo(cr2.mAnc1.x, cr2.mAnc1.y);
  thePath[np++].MoveTo(cr2.mCon.x, cr2.mCon.y);
  thePath[np++].MoveTo(cr2.mAnc2.x, cr2.mAnc2.y);
  GetPath(thePath,polyPath,&curIndex,eOutside,c1Index);

  // LEFT LINE ----------------------------------------------------------------
  np=0;
  thePath[np++].MoveTo(cr4.mAnc1.x,cr4.mAnc1.y);
  thePath[np++].MoveTo(cr4.mCon.x, cr4.mCon.y);
  thePath[np++].MoveTo(cr4.mAnc2.x, cr4.mAnc2.y);
  thePath[np++].MoveTo(cr1.mAnc1.x, cr1.mAnc1.y);
  thePath[np++].MoveTo(cr1.mCon.x, cr1.mCon.y);
  thePath[np++].MoveTo(cr1.mAnc2.x, cr1.mAnc2.y);
  GetPath(thePath,polyPath,&curIndex,eOutside,c1Index);

  aRenderingContext.FillPolygon(polyPath,curIndex); 

}


/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 3/26/99 dwc
 */
void 
nsCSSRendering::PaintRoundedBorder(nsIPresContext* aPresContext,
                                 nsIRenderingContext& aRenderingContext,
                                 nsIFrame* aForFrame,
                                 const nsRect& aDirtyRect,
                                 const nsRect& aBorderArea,
                                 const nsStyleSpacing& aBorderStyle,
                                 nsIStyleContext* aStyleContext,
                                 PRIntn aSkipSides,
                                 PRInt16 aBorderRadius[4],
                                 nsRect* aGap,
                                 PRBool aIsOutline)
{
RoundedRect   outerPath;
QBCurve       UL,LL,UR,LR;
QBCurve       IUL,ILL,IUR,ILR;
QBCurve       cr1,cr2,cr3,cr4;
QBCurve       Icr1,Icr2,Icr3,Icr4;
nsPoint       thePath[MAXPATHSIZE];
PRInt16       np;
nsMargin      border;
nscoord       twipsPerPixel,qtwips;
float         p2t;


  aBorderStyle.CalcBorderFor(aForFrame, border);
  if (!aIsOutline) {
    if ((0 == border.left) && (0 == border.right) &&
        (0 == border.top) && (0 == border.bottom)) {
      return;
    }
  }

  // needed for our border thickness
  aPresContext->GetPixelsToTwips(&p2t);
  twipsPerPixel = NSToCoordRound(p2t);

  // Base our thickness check on the segment being less than a pixel and 1/2
  qtwips = twipsPerPixel >> 2;

  outerPath.Set(aBorderArea.x,aBorderArea.y,aBorderArea.width,aBorderArea.height,aBorderRadius,twipsPerPixel);
  outerPath.GetRoundedBorders(UL,UR,LL,LR);
  outerPath.CalcInsetCurves(IUL,IUR,ILL,ILR,border);

  // TOP LINE -- construct and divide the curves first, then put together our top and bottom paths
  UL.MidPointDivide(&cr1,&cr2);
  UR.MidPointDivide(&cr3,&cr4);
  IUL.MidPointDivide(&Icr1,&Icr2);
  IUR.MidPointDivide(&Icr3,&Icr4);
  if(0!=border.top){
    np=0;
    thePath[np++].MoveTo(cr2.mAnc1.x,cr2.mAnc1.y);
    thePath[np++].MoveTo(cr2.mCon.x, cr2.mCon.y);
    thePath[np++].MoveTo(cr2.mAnc2.x, cr2.mAnc2.y);
    thePath[np++].MoveTo(cr3.mAnc1.x, cr3.mAnc1.y);
    thePath[np++].MoveTo(cr3.mCon.x, cr3.mCon.y);
    thePath[np++].MoveTo(cr3.mAnc2.x, cr3.mAnc2.y);
 
    thePath[np++].MoveTo(Icr3.mAnc2.x,Icr3.mAnc2.y);
    thePath[np++].MoveTo(Icr3.mCon.x, Icr3.mCon.y);
    thePath[np++].MoveTo(Icr3.mAnc1.x, Icr3.mAnc1.y);
    thePath[np++].MoveTo(Icr2.mAnc2.x, Icr2.mAnc2.y);
    thePath[np++].MoveTo(Icr2.mCon.x, Icr2.mCon.y);
    thePath[np++].MoveTo(Icr2.mAnc1.x, Icr2.mAnc1.y);
    RenderSide(thePath,aRenderingContext,aBorderStyle,aStyleContext,NS_SIDE_TOP,border,qtwips);
  }
  // RIGHT  LINE ----------------------------------------------------------------
  LR.MidPointDivide(&cr2,&cr3);
  ILR.MidPointDivide(&Icr2,&Icr3);
  if(0!=border.right){
    np=0;
    thePath[np++].MoveTo(cr4.mAnc1.x,cr4.mAnc1.y);
    thePath[np++].MoveTo(cr4.mCon.x, cr4.mCon.y);
    thePath[np++].MoveTo(cr4.mAnc2.x,cr4.mAnc2.y);
    thePath[np++].MoveTo(cr2.mAnc1.x,cr2.mAnc1.y);
    thePath[np++].MoveTo(cr2.mCon.x, cr2.mCon.y);
    thePath[np++].MoveTo(cr2.mAnc2.x,cr2.mAnc2.y);

    thePath[np++].MoveTo(Icr2.mAnc2.x,Icr2.mAnc2.y);
    thePath[np++].MoveTo(Icr2.mCon.x, Icr2.mCon.y);
    thePath[np++].MoveTo(Icr2.mAnc1.x,Icr2.mAnc1.y);
    thePath[np++].MoveTo(Icr4.mAnc2.x,Icr4.mAnc2.y);
    thePath[np++].MoveTo(Icr4.mCon.x, Icr4.mCon.y);
    thePath[np++].MoveTo(Icr4.mAnc1.x,Icr4.mAnc1.y);
    RenderSide(thePath,aRenderingContext,aBorderStyle,aStyleContext,NS_SIDE_RIGHT,border,qtwips);
  }

  // bottom line ----------------------------------------------------------------
  LL.MidPointDivide(&cr2,&cr4);
  ILL.MidPointDivide(&Icr2,&Icr4);
  if(0!=border.bottom){
    np=0;
    thePath[np++].MoveTo(cr3.mAnc1.x,cr3.mAnc1.y);
    thePath[np++].MoveTo(cr3.mCon.x, cr3.mCon.y);
    thePath[np++].MoveTo(cr3.mAnc2.x, cr3.mAnc2.y);
    thePath[np++].MoveTo(cr2.mAnc1.x, cr2.mAnc1.y);
    thePath[np++].MoveTo(cr2.mCon.x, cr2.mCon.y);
    thePath[np++].MoveTo(cr2.mAnc2.x, cr2.mAnc2.y);

    thePath[np++].MoveTo(Icr2.mAnc2.x,Icr2.mAnc2.y);
    thePath[np++].MoveTo(Icr2.mCon.x, Icr2.mCon.y);
    thePath[np++].MoveTo(Icr2.mAnc1.x, Icr2.mAnc1.y);
    thePath[np++].MoveTo(Icr3.mAnc2.x, Icr3.mAnc2.y);
    thePath[np++].MoveTo(Icr3.mCon.x, Icr3.mCon.y);
    thePath[np++].MoveTo(Icr3.mAnc1.x, Icr3.mAnc1.y);
    RenderSide(thePath,aRenderingContext,aBorderStyle,aStyleContext,NS_SIDE_BOTTOM,border,qtwips);
  }
  // left line ----------------------------------------------------------------
  if(0==border.left)
    return;
  np=0;
  thePath[np++].MoveTo(cr4.mAnc1.x,cr4.mAnc1.y);
  thePath[np++].MoveTo(cr4.mCon.x, cr4.mCon.y);
  thePath[np++].MoveTo(cr4.mAnc2.x, cr4.mAnc2.y);
  thePath[np++].MoveTo(cr1.mAnc1.x, cr1.mAnc1.y);
  thePath[np++].MoveTo(cr1.mCon.x, cr1.mCon.y);
  thePath[np++].MoveTo(cr1.mAnc2.x, cr1.mAnc2.y);


  thePath[np++].MoveTo(Icr1.mAnc2.x,Icr1.mAnc2.y);
  thePath[np++].MoveTo(Icr1.mCon.x, Icr1.mCon.y);
  thePath[np++].MoveTo(Icr1.mAnc1.x, Icr1.mAnc1.y);
  thePath[np++].MoveTo(Icr4.mAnc2.x, Icr4.mAnc2.y);
  thePath[np++].MoveTo(Icr4.mCon.x, Icr4.mCon.y);
  thePath[np++].MoveTo(Icr4.mAnc1.x, Icr4.mAnc1.y);

  RenderSide(thePath,aRenderingContext,aBorderStyle,aStyleContext,NS_SIDE_LEFT,border,qtwips);
}


/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 3/26/99 dwc
 */
void 
nsCSSRendering::RenderSide(nsPoint aPoints[],nsIRenderingContext& aRenderingContext,
                        const nsStyleSpacing& aBorderStyle,nsIStyleContext* aStyleContext,
                        PRUint8 aSide,nsMargin  &aBorThick,nscoord aTwipsPerPixel)
{
QBCurve   thecurve;
nscolor   sideColor;
nsPoint   polypath[MAXPOLYPATHSIZE];
PRInt32   curIndex,c1Index,c2Index,junk;
PRInt8    border_Style;
PRInt16   thickness;

  // set the style information
  aBorderStyle.GetBorderColor(aSide,sideColor);
  aRenderingContext.SetColor ( sideColor );

  thickness = 0;
  switch(aSide){
    case  NS_SIDE_LEFT:
      thickness = aBorThick.left;
      break;
    case  NS_SIDE_TOP:
      thickness = aBorThick.top;
      break;
    case  NS_SIDE_RIGHT:
      thickness = aBorThick.right;
      break;
    case  NS_SIDE_BOTTOM:
      thickness = aBorThick.bottom;
      break;
  }

  // if the border is thin, just draw it 
  if (thickness<aTwipsPerPixel) {
    // NOTHING FANCY JUST DRAW OUR OUTSIDE BORDER
    thecurve.SetPoints(aPoints[0].x,aPoints[0].y,aPoints[1].x,aPoints[1].y,aPoints[2].x,aPoints[2].y);
    thecurve.SubDivide((nsIRenderingContext*)&aRenderingContext,0,0);
    aRenderingContext.DrawLine(aPoints[2].x,aPoints[2].y,aPoints[3].x,aPoints[3].y);
    thecurve.SetPoints(aPoints[3].x,aPoints[3].y,aPoints[4].x,aPoints[4].y,aPoints[5].x,aPoints[5].y);
    thecurve.SubDivide((nsIRenderingContext*)&aRenderingContext,0,0);
  } else {
    
    border_Style = aBorderStyle.GetBorderStyle(aSide);
    switch (border_Style){
      case NS_STYLE_BORDER_STYLE_OUTSET:
      case NS_STYLE_BORDER_STYLE_INSET:
        {
        const nsStyleColor* bgColor = nsStyleUtil::FindNonTransparentBackground(aStyleContext);
        aBorderStyle.GetBorderColor(aSide,sideColor);
        aRenderingContext.SetColor ( MakeBevelColor (aSide, border_Style, bgColor->mBackgroundColor,sideColor, PR_TRUE));
        }
      case NS_STYLE_BORDER_STYLE_DOTTED:
      case NS_STYLE_BORDER_STYLE_DASHED:
        // break;   This is here until dotted and dashed are supported.  It is ok to have
        // dotted and dashed render in solid until this style is supported.  This code should
        // be moved when it is supported so that the above outset and inset will fall into the 
        // solid code below....
      case NS_STYLE_BORDER_STYLE_SOLID:
        polypath[0].x = aPoints[0].x;
        polypath[0].y = aPoints[0].y;
        curIndex = 1;
        GetPath(aPoints,polypath,&curIndex,eOutside,c1Index);
        c2Index = curIndex;
        polypath[curIndex].x = aPoints[6].x;
        polypath[curIndex].y = aPoints[6].y;
        curIndex++;
        GetPath(aPoints,polypath,&curIndex,eInside,junk);
        polypath[curIndex].x = aPoints[0].x;
        polypath[curIndex].y = aPoints[0].y;
        curIndex++;
        aRenderingContext.FillPolygon(polypath,curIndex);

       break;
      case NS_STYLE_BORDER_STYLE_DOUBLE:
        polypath[0].x = aPoints[0].x;
        polypath[0].y = aPoints[0].y;
        curIndex = 1;
        GetPath(aPoints,polypath,&curIndex,eOutside,c1Index);
        aRenderingContext.DrawPolyline(polypath,curIndex);
        polypath[0].x = aPoints[6].x;
        polypath[0].y = aPoints[6].y;
        curIndex = 1;
        GetPath(aPoints,polypath,&curIndex,eInside,c1Index);
        aRenderingContext.DrawPolyline(polypath,curIndex);
        break;
      case NS_STYLE_BORDER_STYLE_NONE:
      case NS_STYLE_BORDER_STYLE_HIDDEN:
      case NS_STYLE_BORDER_STYLE_BLANK:
        break;
      case NS_STYLE_BORDER_STYLE_RIDGE:
      case NS_STYLE_BORDER_STYLE_GROOVE:
        {
        const nsStyleColor* bgColor = nsStyleUtil::FindNonTransparentBackground(aStyleContext);
        aBorderStyle.GetBorderColor(aSide,sideColor);
        aRenderingContext.SetColor ( MakeBevelColor (aSide, border_Style, bgColor->mBackgroundColor,sideColor, PR_TRUE));

        polypath[0].x = aPoints[0].x;
        polypath[0].y = aPoints[0].y;
        curIndex = 1;
        GetPath(aPoints,polypath,&curIndex,eOutside,c1Index);
        polypath[curIndex].x = (aPoints[5].x + aPoints[6].x)>>1;
        polypath[curIndex].y = (aPoints[5].y + aPoints[6].y)>>1;
        curIndex++;
        GetPath(aPoints,polypath,&curIndex,eCalcRev,c1Index,.5);
        polypath[curIndex].x = aPoints[0].x;
        polypath[curIndex].y = aPoints[0].y;
        curIndex++;
        aRenderingContext.FillPolygon(polypath,curIndex);

        aRenderingContext.SetColor ( MakeBevelColor (aSide, 
                                                ((border_Style == NS_STYLE_BORDER_STYLE_RIDGE) ?
                                                NS_STYLE_BORDER_STYLE_GROOVE :
                                                NS_STYLE_BORDER_STYLE_RIDGE), 
                                                bgColor->mBackgroundColor,sideColor, PR_TRUE));
       
        polypath[0].x = (aPoints[0].x + aPoints[11].x)>>1;
        polypath[0].y = (aPoints[0].y + aPoints[11].y)>>1;
        curIndex = 1;
        GetPath(aPoints,polypath,&curIndex,eCalc,c1Index,.5);
        polypath[curIndex].x = aPoints[6].x ;
        polypath[curIndex].y = aPoints[6].y;
        curIndex++;
        GetPath(aPoints,polypath,&curIndex,eInside,c1Index);
        polypath[curIndex].x = aPoints[0].x;
        polypath[curIndex].y = aPoints[0].y;
        curIndex++;
        aRenderingContext.FillPolygon(polypath,curIndex);
        }
        break;
      default:
        break;
    }
  }
}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 3/26/99 dwc
 */
void 
RoundedRect::CalcInsetCurves(QBCurve &aULCurve,QBCurve &aURCurve,QBCurve &aLLCurve,QBCurve &aLRCurve,nsMargin &aBorder)
{
PRInt32   nLeft,nTop,nRight,nBottom;
PRInt32   tLeft,bLeft,tRight,bRight,lTop,rTop,lBottom,rBottom;
PRInt16   adjust=0;

  if(mDoRound)
    adjust = mRoundness[0]>>3;

  nLeft = mLeft + aBorder.left;
  tLeft = mLeft + mRoundness[0];
  bLeft = mLeft + mRoundness[3];

  if(tLeft < nLeft){
    tLeft = nLeft;
  }

  if(bLeft < nLeft){
    bLeft = nLeft;
  }

  nRight = mRight - aBorder.right;
  tRight = mRight - mRoundness[1];
  bRight = mRight - mRoundness[2];

  if(tRight > nRight){
    tRight = nRight;
  }

  if(bRight > nRight){
    bRight = nRight;
  }

  nTop = mTop + aBorder.top;
  lTop = mTop + mRoundness[0];
  rTop = mTop + mRoundness[1];

  if(lTop < nTop){
    lTop = nTop;
  }

  if(rTop < nTop){
    rTop = nTop;
  }

  nBottom = mBottom - aBorder.bottom;
  lBottom = mBottom - mRoundness[3];
  rBottom = mBottom - mRoundness[2];

  if(lBottom > nBottom){
    lBottom = nBottom;
  }

  if(rBottom > nBottom){
    rBottom = nBottom;
  }


  // set the passed in curves to the rounded borders of the rectangle
  aULCurve.SetPoints( nLeft,lTop,
                      nLeft+adjust,nTop+adjust,
                      tLeft,nTop);
  aURCurve.SetPoints( tRight,nTop,
                      nRight-adjust,nTop+adjust,
                      nRight,rTop);
  aLRCurve.SetPoints( nRight,rBottom,
                      nRight-adjust,nBottom-adjust,
                      bRight,nBottom);
  aLLCurve.SetPoints( bLeft,nBottom,
                      nLeft+adjust,nBottom-adjust,
                      nLeft,lBottom);

}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 4/13/99 dwc
 */
void 
RoundedRect::Set(nscoord aLeft,nscoord aTop,PRInt32  aWidth,PRInt32 aHeight,PRInt16 aRadius[4],PRInt16 aNumTwipPerPix)
{
PRBool  doRound;
nscoord x,y,width,height;
int     i;

  // convert this rect to pixel boundaries
  x = (aLeft/aNumTwipPerPix)*aNumTwipPerPix;
  y = (aTop/aNumTwipPerPix)*aNumTwipPerPix;
  width = (aWidth/aNumTwipPerPix)*aNumTwipPerPix;
  height = (aHeight/aNumTwipPerPix)*aNumTwipPerPix;


  for(i=0;i<4;i++) {
    if( (aRadius[i]) > (aWidth>>1) ){
      mRoundness[i] = (aWidth>>1); 
    } else {
      mRoundness[i] = aRadius[i];
    }

    if( mRoundness[i] > (aHeight>>1) )
      mRoundness[i] = aHeight>>1;
  }


  // if we are drawing a circle
  mDoRound = PR_FALSE;
  if(aHeight==aWidth){
    for(i=0;i<4;i++){
      if(mRoundness[i]<(aWidth>>1)){
        doRound = PR_FALSE;
        break;
      }
    }

    if(doRound){
      mDoRound = PR_TRUE;
      for(i=0;i<4;i++){
        mRoundness[i] = aWidth>>1;
      }
    }
  }



  // important coordinates that the path hits
  mLeft = x;
  mTop = y;
  mRight = x+width;
  mBottom = y+height;

}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 4/13/99 dwc
 */
void 
RoundedRect::GetRoundedBorders(QBCurve &aULCurve,QBCurve &aURCurve,QBCurve &aLLCurve,QBCurve &aLRCurve)
{

PRInt16 adjust=0;

  if(mDoRound)
    adjust = mRoundness[0]>>3;

  // set the passed in curves to the rounded borders of the rectangle
  aULCurve.SetPoints( mLeft,mTop + mRoundness[0],
                      mLeft+adjust,mTop+adjust,
                      mLeft+mRoundness[0],mTop);
  aURCurve.SetPoints( mRight - mRoundness[1],mTop,
                      mRight-adjust,mTop+adjust,
                      mRight,mTop + mRoundness[1]);
  aLRCurve.SetPoints( mRight,mBottom - mRoundness[2],
                      mRight-adjust,mBottom-adjust,
                      mRight - mRoundness[2],mBottom);
  aLLCurve.SetPoints( mLeft + mRoundness[3],mBottom,
                      mLeft+adjust,mBottom-adjust,
                      mLeft,mBottom - mRoundness[3]);
}

/** ---------------------------------------------------
 *  Given a qbezier path, convert it into a polygon path
 *	@update 3/26/99 dwc
 *  @param aPoints -- an array of points to use for the path
 *  @param aPolyPath -- an array of points containing the flattened polygon to use
 *  @param aCurIndex -- the index that points to the last element of the array
 *  @param aPathType -- what kind of path that should be returned
 *  @param aFrac -- the inset amount for a eCalc type path
 */
static void 
GetPath(nsPoint aPoints[],nsPoint aPolyPath[],PRInt32 *aCurIndex,ePathTypes  aPathType,PRInt32 &aC1Index,float aFrac)
{
QBCurve thecurve;

  switch (aPathType) {
    case eOutside:
      thecurve.SetPoints(aPoints[0].x,aPoints[0].y,aPoints[1].x,aPoints[1].y,aPoints[2].x,aPoints[2].y);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      aC1Index = *aCurIndex;
      aPolyPath[*aCurIndex].x = aPoints[3].x;
      aPolyPath[*aCurIndex].y = aPoints[3].y;
      (*aCurIndex)++;
      thecurve.SetPoints(aPoints[3].x,aPoints[3].y,aPoints[4].x,aPoints[4].y,aPoints[5].x,aPoints[5].y);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      break;
    case eInside:
      thecurve.SetPoints(aPoints[6].x,aPoints[6].y,aPoints[7].x,aPoints[7].y,aPoints[8].x,aPoints[8].y);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      aPolyPath[*aCurIndex].x = aPoints[9].x;
      aPolyPath[*aCurIndex].y = aPoints[9].y;
      (*aCurIndex)++;
      thecurve.SetPoints(aPoints[9].x,aPoints[9].y,aPoints[10].x,aPoints[10].y,aPoints[11].x,aPoints[11].y);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
     break;
    case eCalc:
      thecurve.SetPoints( (aPoints[0].x+aPoints[11].x)>>1,(aPoints[0].y+aPoints[11].y)>>1,
                          (aPoints[1].x+aPoints[10].x)>>1,(aPoints[1].y+aPoints[10].y)>>1,
                          (aPoints[2].x+aPoints[9].x)>>1,(aPoints[2].y+aPoints[9].y)>>1);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      aPolyPath[*aCurIndex].x = (aPoints[3].x+aPoints[8].x)>>1;
      aPolyPath[*aCurIndex].y = (aPoints[3].y+aPoints[8].y)>>1;
      (*aCurIndex)++;
      thecurve.SetPoints( (aPoints[3].x+aPoints[8].x)>>1,(aPoints[3].y+aPoints[8].y)>>1,
                          (aPoints[4].x+aPoints[7].x)>>1,(aPoints[4].y+aPoints[7].y)>>1,
                          (aPoints[5].x+aPoints[6].x)>>1,(aPoints[5].y+aPoints[6].y)>>1);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      break;
    case eCalcRev:
      thecurve.SetPoints( (aPoints[5].x+aPoints[6].x)>>1,(aPoints[5].y+aPoints[6].y)>>1,
                          (aPoints[4].x+aPoints[7].x)>>1,(aPoints[4].y+aPoints[7].y)>>1,
                          (aPoints[3].x+aPoints[8].x)>>1,(aPoints[3].y+aPoints[8].y)>>1);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      aPolyPath[*aCurIndex].x = (aPoints[2].x+aPoints[9].x)>>1;
      aPolyPath[*aCurIndex].y = (aPoints[2].y+aPoints[9].y)>>1;
      (*aCurIndex)++;
      thecurve.SetPoints( (aPoints[2].x+aPoints[9].x)>>1,(aPoints[2].y+aPoints[9].y)>>1,
                          (aPoints[1].x+aPoints[10].x)>>1,(aPoints[1].y+aPoints[10].y)>>1,
                          (aPoints[0].x+aPoints[11].x)>>1,(aPoints[0].y+aPoints[11].y)>>1);
      thecurve.SubDivide(nsnull,aPolyPath,aCurIndex);
      break;
  } 
}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 4/13/99 dwc
 */
void 
QBCurve::SubDivide(nsIRenderingContext *aRenderingContext,nsPoint aPointArray[],PRInt32 *aCurIndex)
{
QBCurve		curve1,curve2;
PRInt16		fx,fy,smag;

  // divide the curve into 2 pieces
	MidPointDivide(&curve1,&curve2);
	
	fx = (PRInt16)abs(curve1.mAnc2.x - this->mCon.x);
	fy = (PRInt16)abs(curve1.mAnc2.y - this->mCon.y);

	smag = fx+fy-(PR_MIN(fx,fy)>>1);
  //smag = fx*fx + fy*fy;
 
	if (smag>1){
		// split the curve again
    curve1.SubDivide(aRenderingContext,aPointArray,aCurIndex);
    curve2.SubDivide(aRenderingContext,aPointArray,aCurIndex);
	}else{
    if(aPointArray ) {
      // save the points for further processing
      aPointArray[*aCurIndex].x = curve1.mAnc2.x;
      aPointArray[*aCurIndex].y = curve1.mAnc2.y;
      (*aCurIndex)++;
      aPointArray[*aCurIndex].x = curve2.mAnc2.x;
      aPointArray[*aCurIndex].y = curve2.mAnc2.y;
      (*aCurIndex)++;
    }else{
		  // draw the curve 
      nsTransform2D *aTransform;
      aRenderingContext->GetCurrentTransform(aTransform);

      
      aRenderingContext->DrawLine(curve1.mAnc1.x,curve1.mAnc1.y,curve1.mAnc2.x,curve1.mAnc2.y);
      aRenderingContext->DrawLine(curve1.mAnc2.x,curve1.mAnc2.y,curve2.mAnc2.x,curve2.mAnc2.y);
    }
	}
}

/** ---------------------------------------------------
 *  See documentation in nsCSSRendering.h
 *	@update 4/13/99 dwc
 */
void 
QBCurve::MidPointDivide(QBCurve *A,QBCurve *B)
{
double  c1x,c1y,c2x,c2y;
nsPoint	a1;

  c1x = (mAnc1.x+mCon.x)/2.0;
  c1y = (mAnc1.y+mCon.y)/2.0;
  c2x = (mAnc2.x+mCon.x)/2.0;
  c2y = (mAnc2.y+mCon.y)/2.0;

  a1.x = (PRInt32)((c1x + c2x)/2.0);
	a1.y = (PRInt32)((c1y + c2y)/2.0);

  // put the math into our 2 new curves
  A->mAnc1 = this->mAnc1;
  A->mCon.x = (PRInt16)c1x;
  A->mCon.y = (PRInt16)c1y;
  A->mAnc2 = a1;
  B->mAnc1 = a1;
  B->mCon.x = (PRInt16)c2x;
  B->mCon.y = (PRInt16)c2y;
  B->mAnc2 = this->mAnc2;
}