microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/usb/phy/Kconfig

248 строки
7.4 KiB
Plaintext
Исходник Обычный вид История

USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 18:47:04 +04:00
#
# Physical Layer USB driver configuration
#
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
menu "USB Physical Layer drivers"
usb: phy: Improve Kconfig help for CONFIG_USB_PHY The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 09:45:50 +04:00
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
config USB_PHY
def_bool n
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 18:47:04 +04:00
usb: phy: Add OTG FSM configuration option This patch removes dependency on Freescale USB UTG Transceiver driver and makes OTG FSM implementation selectable. Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-26 06:47:53 +04:00
config USB_OTG_FSM
Linux 3.13-rc5 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQEcBAABAgAGBQJSt1TYAAoJEHm+PkMAQRiGvWgH/iWg8TmEWz4KUKuHthuUi0uh 9+2YDN+4k577Xa0obaG24giQeqkCdxMr3oJrS3FO9jeAmaNRHEGhxUPneisb7RtN 9jIVsz5bPa9/DcK9nqtaUQdvA0O5AWTE6AAPmwleTVy+8CygBo987T2uGELnQCSR FrKCrMePc7Pj0uthMVXrpJ17Ffm/j7jkfRtPhrxHJyngh3jEux+tPbpynH/aKuO2 47unsSQimoFk7n2SPFvNu3E/vZE2xVbu5SH9MCl5yyiCifFjpi3B71LV/FW51lvm cK8Jzn2BmYDygRFjnZfq4zJHqYJCBHzpjCLWmR37Dm/JS91aGq3+Cg0stDP8UTs= =+Hcn -----END PGP SIGNATURE----- Merge tag 'v3.13-rc5' into next Linux 3.13-rc5 * tag 'v3.13-rc5': (231 commits) Linux 3.13-rc5 aio: clean up and fix aio_setup_ring page mapping aio/migratepages: make aio migrate pages sane aio: fix kioctx leak introduced by "aio: Fix a trinity splat" Don't set the INITRD_COMPRESS environment variable automatically mm: fix build of split ptlock code pstore: Don't allow high traffic options on fragile devices mm: do not allocate page->ptl dynamically, if spinlock_t fits to long mm: page_alloc: revert NUMA aspect of fair allocation policy Revert "mm: page_alloc: exclude unreclaimable allocations from zone fairness policy" mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment mm/hugetlb: check for pte NULL pointer in __page_check_address() fix build with make 3.80 ... Conflicts: drivers/usb/phy/Kconfig
2013-12-23 21:22:46 +04:00
tristate "USB 2.0 OTG FSM implementation"
depends on USB
usb: phy: Add OTG FSM configuration option This patch removes dependency on Freescale USB UTG Transceiver driver and makes OTG FSM implementation selectable. Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-26 06:47:53 +04:00
select USB_OTG
select USB_PHY
help
Implements OTG Final State Machine as specified in On-The-Go
and Embedded Host Supplement to the USB Revision 2.0 Specification.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
#
# USB Transceiver Drivers
#
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
depends on AB8500_CORE
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
Enable this to support the USB OTG transceiver in AB8500 chip.
This transceiver supports high and full speed devices plus,
in host mode, low speed.
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
usb: phy: Add OTG FSM configuration option This patch removes dependency on Freescale USB UTG Transceiver driver and makes OTG FSM implementation selectable. Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-26 06:47:53 +04:00
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM_RUNTIME
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
select USB_OTG
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
Enable this to support Freescale USB OTG transceiver.
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
depends on I2C && ARCH_OMAP_OTG
usb: phy: fix driver dependencies both isp1301-omap and fsl_usb2_otg drivers depend on usb_bus_start_enum() which is only defined if CONFIG_USB != n. There is a problem, however, where both those drivers could be statically linked, while CONFIG_USB=m. Fix the problem by fixing driver dependency. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 03:00:06 +04:00
depends on USB
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
If you say yes here you get support for the Philips ISP1301
USB-On-The-Go transceiver working with the OMAP OTG controller.
The ISP1301 is a full speed USB transceiver which is used in
products including H2, H3, and H4 development boards for Texas
Instruments OMAP processors.
This driver can also be built as a module. If so, the module
usb: phy: fix some Kconfig descriptions Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-21 22:37:38 +04:00
will be called phy-isp1301-omap.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
usb: phy: add Keystone usb phy driver Add Keystone platform USB PHY driver support. Current main purpose of this driver is to enable the PHY reference clock gate on the Keystone SoC. Otherwise it is a nop PHY. [ balbi@ti.com : add COMPILE_TEST as a possible dependency make sure drvdata is initialized before adding PHY ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12 21:25:30 +04:00
config KEYSTONE_USB_PHY
tristate "Keystone USB PHY Driver"
depends on ARCH_KEYSTONE || COMPILE_TEST
select NOP_USB_XCEIV
help
Enable this to support Keystone USB phy. This driver provides
interface to interact with USB 2.0 and USB 3.0 PHY that is part
of the Keystone SOC.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
config MV_U3D_PHY
bool "Marvell USB 3.0 PHY controller Driver"
usb: gadget: mv_u3d: drop ARCH dependency this driver compiles fine everywhere which means we can use linux-next to compile it for us frequently. By dropping the arch dependency, we also ensure driver writers don't add virtual arch-depdencies to the driver by e.g. using the wrong headers. While at that, fix Marvell's USB3 PHY dependency, that's the driver which depends on CPU_MM3, not mv_u3d_core. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-22 11:15:45 +04:00
depends on CPU_MMP3
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
Enable this to support Marvell USB 3.0 phy controller for Marvell
SoC.
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
This driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
usb: phy: Add AM335x PHY driver This driver is a redo of my earlier attempt. It uses parts of the generic PHY driver and uses the new control driver for the register the phy needs to power on/off the phy. It also enables easy access for the wakeup register which is not yet implemented. The difference between the omap attempt is: - no static holding variable - one global visible function which exports a struct with callbacks to access the "control" registers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30 23:43:45 +04:00
config AM335X_CONTROL_USB
tristate
config AM335X_PHY_USB
tristate "AM335x USB PHY Driver"
USB: phy: Restrict AM335x PHY driver to only be built on !ARM when COMPILE_TEST is set. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-04 01:35:52 +04:00
depends on ARM || COMPILE_TEST
usb: phy: Add AM335x PHY driver This driver is a redo of my earlier attempt. It uses parts of the generic PHY driver and uses the new control driver for the register the phy needs to power on/off the phy. It also enables easy access for the wakeup register which is not yet implemented. The difference between the omap attempt is: - no static holding variable - one global visible function which exports a struct with callbacks to access the "control" registers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30 23:43:45 +04:00
select USB_PHY
select AM335X_CONTROL_USB
select NOP_USB_XCEIV
help
This driver provides PHY support for that phy which part for the
AM335x SoC.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
config SAMSUNG_USBPHY
usb: phy: samsung: Select common driver part implicitly Since phy-samsung-usb library can be used only by phy-samsung-usb2 and phy-samsung-usb3 drivers, there is no need to give explicit control over its Kconfig symbol. This patch makes CONFIG_SAMSUNG_USBPHY symbol hidden and selected implicitly by CONFIG_SAMSUNG_USB2PHY and CONFIG_SAMSUNG_USB3PHY. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-16 13:57:06 +04:00
tristate
usb: phy: add a new driver for usb part of control module Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 14:23:57 +04:00
help
usb: phy: samsung: Common out the generic stuff Moving register and structure definitions to header file, and keeping the generic functions to be used across multiple PHYs in common phy helper driver under SAMSUNG_USBPHY, and moving USB 2.0 PHY driver under SAMSUNG_USB2PHY. Also allowing samsung PHY drivers be built as modules. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 14:29:10 +04:00
Enable this to support Samsung USB phy helper driver for Samsung SoCs.
This driver provides common interface to interact, for Samsung USB 2.0 PHY
driver and later for Samsung USB 3.0 PHY driver.
config SAMSUNG_USB2PHY
tristate "Samsung USB 2.0 PHY controller Driver"
select SAMSUNG_USBPHY
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: samsung: Common out the generic stuff Moving register and structure definitions to header file, and keeping the generic functions to be used across multiple PHYs in common phy helper driver under SAMSUNG_USBPHY, and moving USB 2.0 PHY driver under SAMSUNG_USB2PHY. Also allowing samsung PHY drivers be built as modules. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 14:29:10 +04:00
help
Enable this to support Samsung USB 2.0 (High Speed) PHY controller
driver for Samsung SoCs.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
usb: phy: samsung: Add PHY support for USB 3.0 controller Adding PHY driver support for USB 3.0 controller for Samsung's SoCs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 14:29:11 +04:00
config SAMSUNG_USB3PHY
tristate "Samsung USB 3.0 PHY controller Driver"
select SAMSUNG_USBPHY
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: samsung: Add PHY support for USB 3.0 controller Adding PHY driver support for USB 3.0 controller for Samsung's SoCs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 14:29:11 +04:00
help
Enable this to support Samsung USB 3.0 (Super Speed) phy controller
for samsung SoCs.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
help
Enable this to support the USB OTG transceiver on TWL6030
family chips. This TWL6030 transceiver has the VBUS and ID GND
and OTG SRP events capabilities. For all other transceiver functionality
UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
are hooked to this driver through platform_data structure.
The definition of internal PHY APIs are in the mach-omap2 layer.
config USB_GPIO_VBUS
tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
Removal of GENERIC_GPIO for v3.10 GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO. However, it is not trivial to just create a branch to remove it. Over the course of the v3.9 cycle more code referencing GENERIC_GPIO has been added to linux-next that conflicts with this branch. The following must be done to resolve the conflicts when merging this branch into mainline: * "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be replaced with CONFIG_GPIOLIB * "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese documentation. * Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB * definitions of the option in architecture Kconfig code should be deleted. Stephen has 3 merge fixup patches[1] that do the above. They are currently applicable on mainline as of May 2nd. [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJRifUnAAoJEEFnBt12D9kBs2YP/0U6+ia+xYvkVaJc28PDVIzn OReZNcJOYU8D5voxz0voaRD0EdcPwjbMu9Kp9aXMHlk4VxevF+8jCc/us0bIjtO1 VcB5VmSCIhMhxdnBlum11Mk7Vr5MCweyl9NBsypnPt8cl4obMBZHf2yzoodFktNb wtyYlOb6FALtc6iDbOO6dG3w9F7FAOLvskUFzdv89m8mupTsBu9jw9NqFDbJHOex rxq0Sdd+kWF/nkJVcV5Y6jIdletRlhpipefMJ9diexreHvwqh+c4kJEYZaXgB5+m ha95cPbReK1d+RqzM3A8d4irzSVSmq4k7ijI6QkFOr48+AH7XsgKv5so885LKzMN IIXg2Phm9i0H8+ecEvhcc4oIYBHJiEKK54Y0qUD9dqbFoDGPTCSqMHdSSMbpAY+J bIIXlVzj1En3PPNUJLPt8q8Qz6WxCT9mDST3QSGYnD4o90HT+1R9j92RxGL6McOq rUOyJDwmzFvpBvKK4raGdOU435M+ps2NPKKNIRaIGQPPY9rM1kN4YqvhXukEsC9L 3a3+3cQLh7iKxBHncxeQsJfethP1CPkJnzvF9r+ZZLf2rcPH4pbQIE2uO0XnX/nd 5/DKi0nGgAJ//GMMzdo3RiOA5zGFjIZ/KMvfhQldpP6qFJRhqdGi6FPlAcwr1z1n YnCByPwwlvfC4LTXFOGL =xodc -----END PGP SIGNATURE----- Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-09 20:59:16 +04:00
depends on GPIOLIB
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
Provides simple GPIO VBUS sensing for controllers with an
internal transceiver via the usb_phy interface, and
optionally control of a D+ pullup GPIO as well as a VBUS
current limit regulator.
usb: phy: add a new driver for usb part of control module Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 14:23:57 +04:00
usb: omap1: OTG controller driver Transceivers need to manage OTG controller state on OMAP1 to enable switching between peripheral and host modes. Provide a driver for that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 18:13:06 +04:00
config OMAP_OTG
tristate "OMAP USB OTG controller driver"
depends on ARCH_OMAP_OTG && EXTCON
help
Enable this to support some transceivers on OMAP1 platforms. OTG
controller is needed to switch between host and peripheral modes.
This driver can also be built as a module. If so, the module
usb: phy: fix some Kconfig descriptions Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-21 22:37:38 +04:00
will be called phy-omap-otg.
usb: omap1: OTG controller driver Transceivers need to manage OTG controller state on OMAP1 to enable switching between peripheral and host modes. Provide a driver for that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 18:13:06 +04:00
usb: omap1: Tahvo USB transceiver driver Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 18:13:07 +04:00
config TAHVO_USB
tristate "Tahvo USB transceiver driver"
depends on MFD_RETU && EXTCON
select USB_PHY
help
Enable this to support USB transceiver on Tahvo. This is used
at least on Nokia 770.
config TAHVO_USB_HOST_BY_DEFAULT
depends on TAHVO_USB
boolean "Device in USB host mode by default"
help
Say Y here, if you want the device to enter USB host mode
by default on bootup.
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 18:47:04 +04:00
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
usb: phy: Fix Kconfig dependency for Phy drivers USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 18:56:48 +04:00
depends on USB || USB_GADGET
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 18:47:04 +04:00
depends on I2C
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 18:47:04 +04:00
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
and OTG drivers (to be selected separately).
To compile this driver as a module, choose M here: the
usb: phy: fix some Kconfig descriptions Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-21 22:37:38 +04:00
module will be called phy-isp1301.
usb: phy: mv_u3d: Add usb phy driver for mv_u3d The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 18:29:31 +04:00
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
config USB_MSM_OTG
usb: phy: msm: Make driver selectable on ARCH_QCOM Controller could be found on APQ and MSM platforms, make configuration description more generic. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-28 17:34:04 +04:00
tristate "Qualcomm on-chip USB OTG controller support"
depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM)
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: mv_u3d: Add usb phy driver for mv_u3d The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 18:29:31 +04:00
help
usb: phy: msm: Make driver selectable on ARCH_QCOM Controller could be found on APQ and MSM platforms, make configuration description more generic. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-28 17:34:04 +04:00
Enable this to support the USB OTG transceiver on Qualcomm chips. It
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
handles PHY initialization, clock management, and workarounds
required after resetting the hardware and power management.
This driver is required even for peripheral only or host only
mode configurations.
This driver is not supported on boards like trout which
has an external PHY.
config USB_MV_OTG
tristate "Marvell USB OTG support"
USB: remove remaining instances of USB_SUSPEND Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01 20:13:54 +04:00
depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
select USB_OTG
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
Say Y here if you want to build Marvell USB OTG transciever
driver in kernel (including PXA and MMP series). This driver
implements role switch between EHCI host driver and gadget driver.
To compile this driver as a module, choose M here.
config USB_MXS_PHY
tristate "Freescale MXS USB PHY support"
depends on ARCH_MXC || ARCH_MXS
select STMP_DEVICE
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
help
Enable this to support the Freescale MXS USB PHY.
MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01 06:03:11 +04:00
config USB_RCAR_PHY
phy-rcar-usb: add R8A7778 support The driver currently only supports R8A7779 SoC. Compared to it, R8A7778 USB-PHY has extra register range containing two high-speed signal quality characteristic control registers which should be set up during USB-PHY startup depending on whether a ferrite bead is in use or not. So, we now handle an optional second memory range in the driver's probe method, add the 'ferrite_bead' field to the driver's platform data, and add an extra (optional) step to the USB-PHY startup routine which sets up the extended registers. Also mark in the driver's Kconfig section that R8A7778 is now supported and generally clarify that section, uppercasing the word "phy" and also changing the module name that got lost in the big driver rename, while at it... The patch has been tested on the Marzen and BOCK-W boards. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-09 00:34:36 +04:00
tristate "Renesas R-Car USB PHY support"
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01 06:03:11 +04:00
depends on USB || USB_GADGET
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
select USB_PHY
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01 06:03:11 +04:00
help
phy-rcar-usb: add R8A7778 support The driver currently only supports R8A7779 SoC. Compared to it, R8A7778 USB-PHY has extra register range containing two high-speed signal quality characteristic control registers which should be set up during USB-PHY startup depending on whether a ferrite bead is in use or not. So, we now handle an optional second memory range in the driver's probe method, add the 'ferrite_bead' field to the driver's platform data, and add an extra (optional) step to the USB-PHY startup routine which sets up the extended registers. Also mark in the driver's Kconfig section that R8A7778 is now supported and generally clarify that section, uppercasing the word "phy" and also changing the module name that got lost in the big driver rename, while at it... The patch has been tested on the Marzen and BOCK-W boards. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-09 00:34:36 +04:00
Say Y here to add support for the Renesas R-Car USB common PHY driver.
This chip is typically used as USB PHY for USB host, gadget.
This driver supports R8A7778 and R8A7779.
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01 06:03:11 +04:00
To compile this driver as a module, choose M here: the
phy-rcar-usb: add R8A7778 support The driver currently only supports R8A7779 SoC. Compared to it, R8A7778 USB-PHY has extra register range containing two high-speed signal quality characteristic control registers which should be set up during USB-PHY startup depending on whether a ferrite bead is in use or not. So, we now handle an optional second memory range in the driver's probe method, add the 'ferrite_bead' field to the driver's platform data, and add an extra (optional) step to the USB-PHY startup routine which sets up the extended registers. Also mark in the driver's Kconfig section that R8A7778 is now supported and generally clarify that section, uppercasing the word "phy" and also changing the module name that got lost in the big driver rename, while at it... The patch has been tested on the Marzen and BOCK-W boards. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-09 00:34:36 +04:00
module will be called phy-rcar-usb.
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 14:33:06 +04:00
usb: phy: Add RCAR Gen2 USB phy This adds RCAR Gen2 USB phy support. The driver configures USB channels 0/2 which are shared between PCI USB hosts and USBHS/USBSS devices. It also controls internal USBHS phy. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10 20:35:17 +04:00
config USB_RCAR_GEN2_PHY
tristate "Renesas R-Car Gen2 USB PHY support"
depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
select USB_PHY
help
Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
It is typically used to control internal USB PHY for USBHS,
and to configure shared USB channels 0 and 2.
This driver supports R8A7790 and R8A7791.
To compile this driver as a module, choose M here: the
module will be called phy-rcar-gen2-usb.
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 14:33:06 +04:00
help
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
config USB_ULPI_VIEWPORT
bool
depends on USB_ULPI
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 14:33:06 +04:00
help
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 13:01:15 +04:00
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 13:51:41 +04:00
endmenu