The struct cn_msg len field comes from userspace and needs to be
validated. More logical to do so here where the cn_msg pointer is
pulled out of the sk_buff than the callback which is passed cn_msg *
and might assume no validation is needed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interface is for applications that monitor
the fw health.
We use device_create_with_groups interface
to register attribute with the mei class device
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ME devices prior to PCH8 (Lynx Point) have two FW status registers,
on PCH8 and newer excluding txe there are six FW status registers.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kill host_hw_status and me_hw_state from me hw structure that used
to cache host and me csr values.
We do not use the cached values across the function calls anymore
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 783c8f4c84 ("soc/tegra: Add efuse driver for Tegra") added a
fuse directory in drivers/misc along with a Makefile that were never
used. They were leftovers from an earlier version of the patch series.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If num_ballooned is not 0, we shouldn't neglect the
already-partially-allocated 2MB memory block(s).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under high memory pressure and very high KVP R/W test pressure, the netlink
recvfrom() may transiently return ENOBUFS to the daemon -- we found this
during a 2-week stress test.
We'd better not terminate the daemon on the failure, because a typical KVP
user will re-try the R/W and hopefully it will succeed next time.
We can also ignore the errors on sending.
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of making a list of exceptions for readonly filesystems
in addition to iso9660 we already have it is better to skip freeze
operation for all readonly-mounted filesystems.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ioctl(fd, FIFREEZE, 0) results in an error we cannot report it
to syslog instantly since that can cause write to a frozen disk.
However, the name of the filesystem which caused the error and errno
are valuable and we would like to get a nice human-readable message
in the log. Save errno before calling vss_operate(VSS_OP_THAW) and
report the error right after.
Unfortunately, FITHAW errors cannot be reported the same way as we
need to finish thawing all filesystems before calling syslog().
We should also avoid calling endmntent() for the second time in
case we encountered an error during freezing of '/' as it usually
results in SEGSEGV.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we fail to send a message to userspace daemon with cn_netlink_send()
there is no need to wait for userspace to reply as it is not going to
happen. This happens when kvp or vss daemon is stopped after a successful
handshake. Report HV_E_FAIL immediately and cancel the timeout job so
host won't receive two failures.
Use pr_warn() for VSS and pr_debug() for KVP deliberately as VSS request
are rare and result in a failed backup. KVP requests are much more frequent
after a successful handshake so avoid flooding logs. It would be nice to
have an ability to de-negotiate with the host in case userspace daemon gets
disconnected so we won't receive new requests. But I'm not sure it is
possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In contrast with KVP there is no timeout when communicating with
userspace VSS daemon. In case it gets stuck performing freeze/thaw
operation no message will be sent to the host so it will take very
long (around 10 minutes) before backup fails. Introduce 10 second
timeout using schedule_delayed_work().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchset fix minor issue of extcon driver.
Detailed description for patchset:
- Fix typo and change jig cable name of extcon-max77693.c
- Update the extcon_get_edev_by_phandle() because previous extcon_get_edev_by_phandle()
considered the platform device driver. So, this modification supports
OF-based extcon lookup method by using the list of extcon devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJUcxzfAAoJEJzN3yze689T5KoQAI709jZXredSvSGtUK6qQHKO
+dh9rp9amIpTu+JASoCV//22XkLlOb/6dBg0bPYCSQ1KmO6k+AQSo4DXXayt713w
Fx0f0th64/DmukO7gOXwWXh7+eAfXommUnJPtH7kZj44ZmEJyL7rS87Q/gg6jaua
y4CLw6WvIupNiRHYS8umKM/Oj3z7WhxfMXnkE832uubiIK0ZhrlmMGcg4r410D+V
FrQRmmtFrsZj+x5tnUMekX7BksYDnY/KBfmhY+OApRwveTjVrv77os1kcYKBEouD
IgxKE6DCBiBq8a6rQv8UUJTA6H1DqGFjRAbypiVHxzRZhGZve33EYd8LUP/HHQgS
JE86ufiJ8KEYrvq9B5zb9RSi2JHK4l/kr6AIiuoOsDjINVX5mnjelUY1Xhdog/DJ
cLS2o7khFfz80/aMDs7n+k6kor+VLexAQuAsRotLXo8ppmItGKm5xellh04dFW6y
evTsGyicwK3Vo/LNKzTvMKVOsyUI6Ky+B18vTcc+6KzwS5qBM3Pz9lzqGfqNyw0B
fVeLBDS0SIby0DYlvrAJ1fs32/BnhaDT0SbPUH1HUJxlVk5GprzAC5vCfG7CjAwR
jN9na8gg3nZp+8L/GmWDPt0ESQSg2x5BsacXFzVdhUTU16Fc+0S4PxkJ//w3TF6x
ljUtHjUC90QeHX412l+P
=k6tk
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing
Update extcon for v3.19
This patchset fix minor issue of extcon driver.
Detailed description for patchset:
- Fix typo and change jig cable name of extcon-max77693.c
- Update the extcon_get_edev_by_phandle() because previous extcon_get_edev_by_phandle()
considered the platform device driver. So, this modification supports
OF-based extcon lookup method by using the list of extcon devices.
Fix a typo in name of company in copyright comment.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
When JIG was set to "boot on" mode, the UART connection did not work
because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON
cable.
This was introduced in 39bf369e4e ("extcon: max77693: Add support dock
device and buttons") while adding dock features.
Assign the JIG-UART-ON back to UART path.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch name to remove specific board name]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Platform bus is not the only way to have extcon devices, so current
implementation of of_extcon_get_extcon_dev() is broken. Also using
parent device node only to get device name is quite ugly.
This patch reimplements of_extcon_get_extcon_dev() to do exactly the
same as extcon_get_extcon_dev() but instead of comparing names, compare
node pointers.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
[mszyprow: simplified the code]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This reverts commit 32eca22180.
Changing core kernel code to operate in a different manner, without a
build-time breakage is tough to do and ensure you got it right. There
are lots of problems popping up due to this change, so let's revert it
for now as it is not safe to merge to the tree at this point in time.
Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 2bfeeca107.
Not needed after the next patch is applied.
Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 965ab29ba0.
This is causing way more problems than it is worth.
Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch improves the detection of defects by updating the
regular expression to find Kconfig identifiers in the source
code, and fixes some cases of false positives. The following
changes are made:
- improve regex to find Kconfig identifiers in the source
- exclude .log files from analysis
- improve filtering of false positives (e.g, CONFIG_XXX)
- change output format from (feature:\tlist) to (feature\tlist)
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing minimal support for etb/etm to favour an implementation
that is more flexible, extensible and capable of handling more
platforms.
Also removing the only client of the old driver. That code can
easily be replaced by entries for etb/etm in the device tree.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for 16 PTMs, funnel, TPIU and replicator connected
to the ETB are included.
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for the 2 PTMs, 3 ETMs, funnel, TPIU and replicator
connected to the ETB are included. Proper handling of the
ITM and the replicator linked to it along with the CTIs
and SWO are not included.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently supporting ETM and ETB. Support for TPIU
and SDTI are yet to be added.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation containing an explanation on what the framework
provides and the drivers working with it. A minimal example
on how to use the functionality is also provided.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver manages non-configurable CoreSight Replicator that
takes a single input trace data stream and replicates it to
produce two identical trace data output streams. Replicators
are typically used to route single interleaved trace data
stream to two or more sinks.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver manages CoreSight Funnel which acts as a link.
Funnels have multiple input ports (typically 8) each of which
represents an input trace data stream. These multiple input trace
data streams are interleaved into a single output stream coming
out of the Funnel.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver manages CoreSight TPIU (Trace Port Interface Unit)
which acts as a sink. TPIU is typically connected to some offchip
hardware hosting a storage buffer.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver manages CoreSight TMC (Trace Memory Controller) which
can act as a link or a sink depending upon its configuration. It
can present itself as an ETF (Embedded Trace FIFO) or ETR
(Embedded Trace Router).
ETF when configured in circular buffer mode acts as a trace
collection sink. When configured in HW fifo mode it acts as link.
ETR always acts as a sink and can be used to route data to memory
allocated in RAM.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CoreSight components are compliant with the ARM CoreSight
architecture specification and can be connected in various
topologies to suit a particular SoC tracing needs. These trace
components can generally be classified as sources, links and
sinks. Trace data produced by one or more sources flows through
the intermediate links connecting the source to the currently
selected sink.
The CoreSight framework provides an interface for the CoreSight trace
drivers to register themselves with. It's intended to build up a
topological view of the CoreSight components and configure the
correct serie of components on user input via sysfs.
For eg., when enabling a source, the framework builds up a path
consisting of all the components connecting the source to the
currently selected sink(s) and enables all of them.
The framework also supports switching between available sinks
and provides status information to user space applications
through the debugfs interface.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit bb34cb6bbd.
Wrong patch for the wrong branch, sorry for the noise...
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All other sa1111 platforms pass sa1111_dev instance to platform-specific
code. Follow this approach for Jornada720 platform code.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass sa1111_dev to platform-specific init code, as it is done by lubbock
and neponset. This removes a compilation warnings:
drivers/pcmcia/sa1111_badge4.c: In function 'pcmcia_badge4_init':
drivers/pcmcia/sa1111_badge4.c:147:5: warning: passing argument 1 of 'sa1111_pcmcia_add' from incompatible pointer type [enabled by default]
In file included from drivers/pcmcia/sa1111_badge4.c:26:0:
drivers/pcmcia/sa1111_generic.h:15:5: note: expected 'struct sa1111_dev *' but argument is of type 'struct device *'
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 32 bit addition "(hangcheck_margin + hangcheck_tick)" could
potentially overflow. It triggers a static checker warning to have an
overflowed addition followed by a no-op cast. I have moved the cast so
that the addition can't overflow.
Also I removed the unneeded cast on the following line since both
"hangcheck_tsc_margin" and "TIMER_FREQ" are already 64 bit types.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the
following dmesg errors can be seen on a Raspberry Pi:
[ 31.492386] Failed to read 1-wire data from 0x81: err=-110.
[ 31.504168] 0x81: count=-110, status:
[ 31.613404] Failed to read 1-wire data from 0x81: err=-110.
[ 31.621915] 0x81: count=-110, status:
[ 43.260968] Failed to read 1-wire data from 0x81: err=-110.
[ 43.270998] 0x81: count=-110, status:
[ 43.379959] Failed to read 1-wire data from 0x81: err=-110.
[ 43.388854] 0x81: count=-110, status:
Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pch_phub_save_reg_conf() and pch_phub_restore_reg_conf() functions
are only used for suspend/resume support (i.e. when PM is enabled). If
PM is disabled they don't need to be built.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`genwqe_user_vmap()` calls `get_user_pages_fast()` and if the return
value is less than the number of pages requested, it frees the pages and
returns an error (`-EFAULT`). However, it fails to consider a negative
error return value from `get_user_pages_fast()`. In that case, the test
`if (rc < m->nr_pages)` will be false (due to promotion of `rc` to a
large `unsigned int`) and the code will continue on to call
`genwqe_map_pages()` with an invalid list of page pointers. Fix it by
bailing out if `get_user_pages_fast()` returns a negative error value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.14.x # 3.15.x # 3.16.x # 3.17.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
an open syscall now assignes file->private_data to a pointer to the
miscdevice structure. This reminds driver developers not to duplicate
code if they need this.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the miscdevice core now does the work in any case.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As of now, a miscdevice driver has to provide an implementation of
the open() file operation if it wants to have misc_open() assign a
pointer to struct miscdevice to file->private_data for other file
operations to use (given the user calls open()).
This leads to situations where a miscdevice driver that doesn't need
internal operations during open() has to implement open() that only
returns immediately, in order to use the data in private_data in other
fops.
This provides consistent behaviour for miscdevice developers and will
always provide the pointer in private_data. A driver's open() fop would,
of course, just overwrite it, when using private_data itself.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When build with Debug the following crash is sometimes observed:
Call Trace:
[<ffffffff812b9600>] string+0x40/0x100
[<ffffffff812bb038>] vsnprintf+0x218/0x5e0
[<ffffffff810baf7d>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff812bb4c1>] vscnprintf+0x11/0x30
[<ffffffff8107a2f0>] vprintk+0xd0/0x5c0
[<ffffffffa0051ea0>] ? vmbus_process_rescind_offer+0x0/0x110 [hv_vmbus]
[<ffffffff8155c71c>] printk+0x41/0x45
[<ffffffffa004ebac>] vmbus_device_unregister+0x2c/0x40 [hv_vmbus]
[<ffffffffa0051ecb>] vmbus_process_rescind_offer+0x2b/0x110 [hv_vmbus]
...
This happens due to the following race: between 'if (channel->device_obj)' check
in vmbus_process_rescind_offer() and pr_debug() in vmbus_device_unregister() the
device can disappear. Fix the issue by taking an additional reference to the
device before proceeding to vmbus_device_unregister().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt to fix fcopy on i586 (bc5a5b0 Drivers: hv: util: Properly pack the data
for file copy functionality) led to a regression on x86_64 (and actually didn't fix
i586 breakage). Fcopy messages from Hyper-V host come in the following format:
struct do_fcopy_hdr | 36 bytes
0000 | 4 bytes
offset | 8 bytes
size | 4 bytes
data | 6144 bytes
On x86_64 struct hv_do_fcopy matched this format without ' __attribute__((packed))'
and on i586 adding ' __attribute__((packed))' to it doesn't change anything. Keep
the structure packed and add padding to match re reality. Tested both i586 and x86_64
on Hyper-V Server 2012 R2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All tools/hv daemons do mandatory daemon() on startup. However, no pidfile
is created, this make it difficult for an init system to track such daemons.
Modern linux distros use systemd as their init system. It can handle the
daemonizing by itself, however, it requires a daemon to stay in foreground
for that. Some distros already carry distro-specific patch for hv tools
which switches off daemon().
Introduce -n/--no-daemon option for all 3 daemons in hv/tools. Parse options
with getopt() to make this part easily expandable.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a partition appears mounted more than once in /proc/mounts, vss_do_freeze()
succeeds only for the first time and gets EBUSY (on freeze) or EINVAL (on
thaw) for the second time. The patch ignores these to make the backup feature
work.
Also improved the error handling in case a freeze operation fails.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a completion to 27a90700a4
The size field is also increased to allow values larger than 32 bits
on platforms that have more than 32 bit physical addresses.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As in 4f452e8aa4, use resource_size_t
to accomodate sizes greater than the size of an unsigned long int on
platforms that have more than 32 bit physical addresses.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Fries
Tomas Winkler
Alexander Usyskin
Thierry Reding
Dexuan Cui
Vitaly Kuznetsov
Greg Kroah-Hartman
Krzysztof Kozlowski
Tomasz Figa
Valentin Rothberg
Mathieu Poirier
Xia Kaixu
Pratik Patel
Dmitry Eremin-Solenikov
Dan Carpenter
Alexander Stein
Alex Williamson
Ian Abbott
Martin Kepplinger
Cristian Stoica