Граф коммитов

931 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds ab69bcd66f Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (28 commits)
  driver core: device_rename's new_name can be const
  sysfs: Remove owner field from sysfs struct attribute
  powerpc/pci: Remove owner field from attribute initialization in PCI bridge init
  regulator: Remove owner field from attribute initialization in regulator core driver
  leds: Remove owner field from attribute initialization in bd2802 driver
  scsi: Remove owner field from attribute initialization in ARCMSR driver
  scsi: Remove owner field from attribute initialization in LPFC driver
  cgroupfs: create /sys/fs/cgroup to mount cgroupfs on
  Driver core: Add BUS_NOTIFY_BIND_DRIVER
  driver core: fix memory leak on one error path in bus_register()
  debugfs: no longer needs to depend on SYSFS
  sysfs: Fix one more signature discrepancy between sysfs implementation and docs.
  sysfs: fix discrepancies between implementation and documentation
  dcdbas: remove a redundant smi_data_buf_free in dcdbas_exit
  dmi-id: fix a memory leak in dmi_id_init error path
  sysfs: sysfs_chmod_file's attr can be const
  firmware: Update hotplug script
  Driver core: move platform device creation helpers to .init.text (if MODULE=n)
  Driver core: reduce duplicated code for platform_device creation
  Driver core: use kmemdup in platform_device_add_resources
  ...
2010-08-06 11:36:30 -07:00
Linus Torvalds 03c0c29aff Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.
2010-08-05 15:57:35 -07:00
Johannes Berg 6937e8f8c0 driver core: device_rename's new_name can be const
The new_name argument to device_rename() can be
const as kobject_rename's new_name argument is.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:35 -07:00
Magnus Damm 45daef0fdc Driver core: Add BUS_NOTIFY_BIND_DRIVER
Add BUS_NOTIFY_BIND_DRIVER as a bus notifier event.

For driver binding/unbinding we with this in
place have the following bus notifier events:
 - BUS_NOTIFY_BIND_DRIVER - before ->probe()
 - BUS_NOTIFY_BOUND_DRIVER - after ->probe()
 - BUS_NOTIFY_UNBIND_DRIVER - before ->remove()
 - BUS_NOTIFY_UNBOUND_DRIVER - after ->remove()

The event BUS_NOTIFY_BIND_DRIVER allows bus code
to be notified that ->probe() is about to be called.

Useful for bus code that needs to setup hardware before
the driver gets to run. With this in place platform
drivers can be loaded and unloaded as modules and the
new BIND event allows bus code to control for instance
device clocks that must be enabled before the driver
can be executed.

Without this patch there is no way for the bus code to
get notified that a modular driver is about to be probed.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:35 -07:00
Jike Song 600c20f34f driver core: fix memory leak on one error path in bus_register()
Reported-by: huangweibing@gmail.com
Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:35 -07:00
Uwe Kleine-König 737a3bb941 Driver core: move platform device creation helpers to .init.text (if MODULE=n)
Platform devices should only be called by init code, so it should be
possible to move creation helpers to .init.text -- at least if modules
are disabled.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Uwe Kleine-König 44f28bdea0 Driver core: reduce duplicated code for platform_device creation
This makes the two similar functions platform_device_register_simple
and platform_device_register_data one line inline functions using a new
generic function platform_device_register_resndata.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Uwe Kleine-König 3e61dfd850 Driver core: use kmemdup in platform_device_add_resources
This makes platform_device_add_resources look like
platform_device_add_data.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Dmitry Torokhov f8a4bd3456 firmware loader: embed device into firmware_priv structure
Both these structures have the same lifetime rules so instead of allocating
and managing them separately embed struct device into struct firmware_priv.
Also make sure to delete sysfs attributes ourselves instead of expecting
sysfs to clean up our mess.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Dmitry Torokhov 0983ca2d0f firmware loader: use statically initialized data attribute
There is no reason why we are using a template for binary attribute
and copying it into per-firmware data before registering. Using the
original works as well.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Marin Mitov ed1d218c95 Driver core: internal struct dma_coherent_mem, change type of a member.
struct dma_coherent_mem in drivers/base/dma-coherent.c
has member 'device_base' that is of type u32,
but is assigned value of type dma_addr_t, which may be
64 bits for x86_64. Change the type to dma_addr_t.

Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:33 -07:00
Linus Torvalds 6ba74014c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)
2010-08-04 11:47:58 -07:00
Linus Torvalds f46e9913fa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Add runtime PM statistics (v3)
  PM / Runtime: Make runtime_status attribute not debug-only (v. 2)
  PM: Do not use dynamically allocated objects in pm_wakeup_event()
  PM / Suspend: Fix ordering of calls in suspend error paths
  PM / Hibernate: Fix snapshot error code path
  PM / Hibernate: Fix hibernation_platform_enter()
  pm_qos: Get rid of the allocation in pm_qos_add_request()
  pm_qos: Reimplement using plists
  plist: Add plist_last
  PM: Make it possible to avoid races between wakeup and system sleep
  PNPACPI: Add support for remote wakeup
  PM: describe kernel policy regarding wakeup defaults (v. 2)
  PM / Hibernate: Fix typos in comments in kernel/power/swap.c
2010-08-04 11:14:36 -07:00
Eric W. Biederman 24b1442d01 Driver-core: Always create class directories for classses that support namespaces.
This fixes the regression in 2.6.35-rcX where bluetooth network devices
would fail to be deleted from sysfs, causing their destruction and
recreation to fail.  In addition this fixes the mac80211_hwsim driver
where it would leave around sysfs files when the driver was removed.

This problem is discussed at
  https://bugzilla.kernel.org/show_bug.cgi?id=16257

The reason for the regression is that the network namespace support
added to sysfs expects and requires that network devices be put in
directories that can contain only network devices.

Today get_device_parent almost provides that guarantee for all class
devices, except for a specific exception when the parent of a class
devices is a class device.  It would be nice to simply remove that
arguably incorrect special case, but apparently the input devices depend
on it being there.  So I have only removed it for class devices with
network namespace support.  Which today are the network devices.

It has been suggested that a better fix would be to change the parent
device from a class device to a bus device, which in the case of the
bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth,
I can not see how we would avoid significant userspace breakage if we
were to make that change.

Adding an extra directory in the path to the device will also be
userspace visible but it is much less likely to break things.
Everything is still accessible from /sys/class (for example), and it
fixes two bugs.  Adding an extra directory fixes a 3 year old regression
introduced with the new sysfs layout that makes it impossible to rename
bnep0 network devices to names that conflict with hci device attributes
like hci_revsion.  Adding an additional directory removes the new
failure modes introduced by the network namespace code.

If it weren't for the regession in the renaming of network devices I
would figure out how to just make the sysfs code deal with this
configuration of devices.

In summary this patch fixes regressions by changing:
"/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0".

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26 08:05:31 -07:00
Grant Likely eca3930163 of: Merge of_platform_bus_type with platform_bus_type
of_platform_bus was being used in the same manner as the platform_bus.
The only difference being that of_platform_bus devices are generated
from data in the device tree, and platform_bus devices are usually
statically allocated in platform code.  Having them separate causes
the problem of device drivers having to be registered twice if it
was possible for the same device to appear on either bus.

This patch removes of_platform_bus_type and registers all of_platform
bus devices and drivers on the platform bus instead.  A previous patch
made the of_device structure an alias for the platform_device structure,
and a shim is used to adapt of_platform_drivers to the platform bus.

After all of of_platform_bus drivers are converted to be normal platform
drivers, the shim code can be removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:51 -06:00
Grant Likely 05212157e9 drivercore/of: Add OF style matching to platform bus
As part of the merge between platform bus and of_platform bus, add the
ability to do of-style matching to the platform bus.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
CC: Michal Simek <monstr@monstr.eu>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: linux-kernel@vger.kernel.org
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
CC: devicetree-discuss@lists.ozlabs.org
2010-07-24 09:57:51 -06:00
Arjan van de Ven 8d4b9d1bfe PM / Runtime: Add runtime PM statistics (v3)
In order for PowerTOP to be able to report how well the new runtime PM is
working for the various drivers, the kernel needs to export some basic
statistics in sysfs.

This patch adds two sysfs files in the runtime PM domain that expose the
total time a device has been active, and the time a device has been
suspended.

With this PowerTOP can compute the activity percentage

Active %age = 100 * (delta active) / (delta active + delta suspended)

and present the information to the user.

I've written the PowerTOP code (slated for version 1.12) already, and the
output looks like this:

Runtime Device Power Management statistics
Active  Device name
 10.0%	06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller

[version 2: fix stat update bugs noticed by Alan Stern]
[version 3: rebase to -next and move the sysfs declaration]

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-19 02:01:06 +02:00
Alan Stern 0fcb4eef82 PM / Runtime: Make runtime_status attribute not debug-only (v. 2)
This patch (as1404b) makes the runtime_status sysfs attribute available
even in the absence of CONFIG_PM_ADVANCED_DEBUG, and it changes the
routine to display "unsupported" when runtime PM is disabled for a
device.  Although not strictly 100% accurate, this will almost always
be correct.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-19 02:00:36 +02:00
Rafael J. Wysocki 4eb241e569 PM: Do not use dynamically allocated objects in pm_wakeup_event()
Originally, pm_wakeup_event() uses struct delayed_work objects,
allocated with GFP_ATOMIC, to schedule the execution of pm_relax()
in future.  However, as noted by Alan Stern, it is not necessary to
do that, because all pm_wakeup_event() calls can use one static timer
that will always be set to expire at the latest time passed to
pm_wakeup_event().

The modifications are based on the example code posted by Alan.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-19 02:00:35 +02:00
Rafael J. Wysocki c125e96f04 PM: Make it possible to avoid races between wakeup and system sleep
One of the arguments during the suspend blockers discussion was that
the mainline kernel didn't contain any mechanisms making it possible
to avoid races between wakeup and system suspend.

Generally, there are two problems in that area.  First, if a wakeup
event occurs exactly when /sys/power/state is being written to, it
may be delivered to user space right before the freezer kicks in, so
the user space consumer of the event may not be able to process it
before the system is suspended.  Second, if a wakeup event occurs
after user space has been frozen, it is not generally guaranteed that
the ongoing transition of the system into a sleep state will be
aborted.

To address these issues introduce a new global sysfs attribute,
/sys/power/wakeup_count, associated with a running counter of wakeup
events and three helper functions, pm_stay_awake(), pm_relax(), and
pm_wakeup_event(), that may be used by kernel subsystems to control
the behavior of this attribute and to request the PM core to abort
system transitions into a sleep state already in progress.

The /sys/power/wakeup_count file may be read from or written to by
user space.  Reads will always succeed (unless interrupted by a
signal) and return the current value of the wakeup events counter.
Writes, however, will only succeed if the written number is equal to
the current value of the wakeup events counter.  If a write is
successful, it will cause the kernel to save the current value of the
wakeup events counter and to abort the subsequent system transition
into a sleep state if any wakeup events are reported after the write
has returned.

[The assumption is that before writing to /sys/power/state user space
will first read from /sys/power/wakeup_count.  Next, user space
consumers of wakeup events will have a chance to acknowledge or
veto the upcoming system transition to a sleep state.  Finally, if
the transition is allowed to proceed, /sys/power/wakeup_count will
be written to and if that succeeds, /sys/power/state will be written
to as well.  Still, if any wakeup events are reported to the PM core
by kernel subsystems after that point, the transition will be
aborted.]

Additionally, put a wakeup events counter into struct dev_pm_info and
make these per-device wakeup event counters available via sysfs,
so that it's possible to check the activity of various wakeup event
sources within the kernel.

To illustrate how subsystems can use pm_wakeup_event(), make the
low-level PCI runtime PM wakeup-handling code use it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-19 01:58:48 +02:00
Joe Perches 99bcf21718 device.h drivers/base/core.c Convert dev_<level> logging macros to functions
Reduces an x86 defconfig text and data ~55k, .6% smaller.

$ size vmlinux*
   text	   data	    bss	    dec	    hex	filename
7205273	 716016	1366288	9287577	 8db799	vmlinux
7258890	 719768	1366288	9344946	 8e97b2	vmlinux.master

Uses %pV and struct va_format
Format arguments are verified before printk

The dev_info macro is converted to _dev_info because there are
existing uses of variables named dev_info in the kernel tree
like drivers/net/pcmcia/pcnet_cs.c

A dev_info macro is created to call _dev_info

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04 10:40:17 -07:00
Akinobu Mita ad84bb5b98 topology: convert cpu notifier to return encapsulate errno value
By the previous modification, the cpu notifier can return encapsulate
errno value.  This converts the cpu notifiers for topology.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:48 -07:00
Mel Gorman ed4a6d7f06 mm: compaction: add /sys trigger for per-node memory compaction
Add a per-node sysfs file called compact.  When the file is written to,
each zone in that node is compacted.  The intention that this would be
used by something like a job scheduler in a batch system before a job
starts so that the job can allocate the maximum number of hugepages
without significant start-up cost.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:59 -07:00
Christoph Egger 1d9e882ba4 driver-core: fix Typo in drivers/base/core.c for CONFIG_MODULE
In this code section the final S of CONFIG_MODULES was missed making
the whole check useless

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:32 -07:00
Chris Wright 2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Eric W. Biederman f349cf3473 driver core: Implement ns directory support for device classes.
device_del and device_rename were modified to use
sysfs_delete_link and sysfs_rename_link respectively to ensure
when these operations happen on devices whose classes
are in namespace directories they work properly.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Eric W. Biederman bc451f2058 kobj: Add basic infrastructure for dealing with namespaces.
Move complete knowledge of namespaces into the kobject layer
so we can use that information when reporting kobjects to
userspace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Hugh Daschbach 6245838fe4 Driver core: Protect device shutdown from hot unplug events.
While device_shutdown() walks through devices_kset to shutdown all
devices, device unplug events may race to shutdown individual devices.
Specifically, sd_shutdown(), on behalf of fc_starget_delete(), has
been observed deleting devices during device_shutdown()'s list
traversal.  So we factor out list_for_each_entry_safe_reverse(...) in
favor of while (!list_empty(...)).

Signed-off-by: Hugh Daschbach <hdasch@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Dmitry Torokhov e177123f0c firmware loader: do not allocate firmare id separately
fw_id has the same life time as firmware_priv so it makes sense to move
it into firmware_priv structure instead of allocating separately.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Dmitry Torokhov bcb9bd18e3 firmware loader: split out builtin firmware handling
Split builtin firmware handling into separate functions to clean up the
main body of code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Dmitry Torokhov 673fae90d5 firmware loader: rely on driver core to create class attribute
Do not create 'timeout' attribute manually, let driver core do it for us.
This also ensures that attribute is cleaned up properly.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Johannes Berg e9045f9178 firmware class: export nowait to userspace
When we use request_firmware_nowait(), userspace may
not want to answer negatively right away when for
example it is answering from an initrd only, but
with request_firmware() it has to in order to not
delay the kernel boot until the request times out.

This allows userspace to differentiate between the
two in order to be able to reply negatively to async
requests only when all filesystems have been mounted
and have been checked for the requested firmware file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Peter Zijlstra 1704f47b50 lockdep: Add novalidate class for dev->mutex conversion
The conversion of device->sem to device->mutex resulted in lockdep
warnings. Create a novalidate class for now until the driver folks
come up with separate classes. That way we have at least the basic
mutex debugging coverage.

Add a checkpatch error so the usage is reserved for device->mutex.

[ tglx: checkpatch and compile fix for LOCKDEP=n ]

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Thomas Gleixner 3142788b79 drivers/base: Convert dev->sem to mutex
The semaphore is semantically a mutex. Convert it to a real mutex and
fix up a few places where code was relying on semaphore.h to be included
by device.h, as well as the users of the trylock function, as that value
is now reversed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Kevin Hilman 190e8370b8 platform_bus: allow custom extensions to system PM methods
When runtime PM for platform_bus was added, it allowed for platforms
to customize the runtime PM methods since they are defined as weak
symbols.

This patch allows platforms to also extend the system PM methods with
custom hooks so runtime PM and system PM extensions can be managed
together by custom platform-specific code.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Peter Korsgaard da5e4ef7fd devtmpfs: support !CONFIG_TMPFS
Make devtmpfs available on (embedded) configurations without SHMEM/TMPFS,
using ramfs instead.

Saves ~15KB.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Julia Lawall 1653268b1b driver core: module.c: Use kasprintf
kasprintf combines kmalloc and sprintf, and takes care of the size
calculation itself.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression a,flag;
expression list args;
statement S;
@@

  a =
-  \(kmalloc\|kzalloc\)(...,flag)
+  kasprintf(flag,args)
  <... when != a
  if (a == NULL || ...) S
  ...>
- sprintf(a,args);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
Alan Stern ffa156590f Driver core: don't initialize wakeup flags
This patch (as1351) removes an unnecessary and unwanted assignment
from device_initialize().  The wakeup flags are set to 0 along with
everything else when the device structure is allocated, so we don't
need to do it again.  Furthermore, the subsystem might already have
set these flags to their correct values; we don't want to override it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
Stefani Seibold fbb88fadf7 driver-core: fix potential race condition in drivers/base/dd.c
This patch fix a potential race condition in the driver_bound() function
in the file driver/base/dd.c.

The broadcast of the BUS_NOTIFY_BOUND_DRIVER notifier should be done
after adding the new device to the driver list. Otherwise notifier
listener will fail if they use functions like usb_find_interface().

The patch is against kernel 2.6.33. Please merge it.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
Rafael J. Wysocki 6f18ff91d9 Driver core: Reduce the level of request_firmware() messages
The messages from _request_firmware() informing that firmware is
being requested or built-in firmware is going to be used are printed
at KERN_INFO, which produces lots of noise on systems with huge
numbers of AMD CPUs.  Reduce the level of these messages to
KERN_DEBUG to get rid of that noise.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
David Woodhouse dd336c554d firmware_class: fix memory leak - free allocated pages
fix memory leak introduced by the patch 6e03a201bbe:
firmware: speed up request_firmware()

1. vfree won't release pages there were allocated explicitly and mapped
using vmap. The memory has to be vunmap-ed and the pages needs
to be freed explicitly

2. page array is moved into the 'struct
firmware' so that we can free it from release_firmware()
and not only in fw_dev_release()

The fix doesn't break the firmware load speed.

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Singed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:28 -07:00
Jan Beulich cdc6e3d396 drivers/base/cpu.c: fix the output from /sys/devices/system/cpu/offline
Without CONFIG_CPUMASK_OFFSTACK, simply inverting cpu_online_mask leads
to CPUs beyond nr_cpu_ids to be displayed twice and CPUs not even
possible to be displayed as offline.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:28 -07:00
Linus Torvalds 46ee964509 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: PM QOS update fix
  Freezer / cgroup freezer: Update stale locking comments
  PM / platform_bus: Allow runtime PM by default
  i2c: Fix bus-level power management callbacks
  PM QOS update
  PM / Hibernate: Fix block_io.c printk warning
  PM / Hibernate: Group swap ops
  PM / Hibernate: Move the first_sector out of swsusp_write
  PM / Hibernate: Separate block_io
  PM / Hibernate: Snapshot cleanup
  FS / libfs: Implement simple_write_to_buffer
  PM / Hibernate: document open(/dev/snapshot) side effects
  PM / Runtime: Add sysfs debug files
  PM: Improve device power management document
  PM: Update device power management document
  PM: Allow runtime_suspend methods to call pm_schedule_suspend()
  PM: pm_wakeup - switch to using bool
2010-05-20 09:03:55 -07:00
Linus Torvalds 7c7cbaf5b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits)
  sh: update defconfigs.
  sh: Fix up the NUMA build for recent LMB changes.
  sh64: provide a stub per_cpu_trap_init() definition.
  sh: fix up CONFIG_KEXEC=n build.
  sh: fixup the docbook paths for clock framework shuffling.
  driver core: Early dev_name() depends on slab_is_available().
  sh: simplify WARN usage in SH clock driver
  sh: Check return value of clk_get on ms7724
  sh: Check return value of clk_get on ecovec24
  sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c
  sh: move sh clock.c contents to drivers/sh/clk.
  sh: move sh asm/clock.h contents to linux/sh_clk.h V2
  sh: remove unused clock lookup
  sh: switch boards to clkdev
  sh: switch sh4-202 to clkdev
  sh: switch shx3 to clkdev
  sh: switch sh7757 to clkdev
  sh: switch sh7763 to clkdev
  sh: switch sh7780 to clkdev
  sh: switch sh7786 to clkdev
  ...
2010-05-19 11:36:03 -07:00
Linus Torvalds 8123d8f17d Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Add amd_iommu=off command line option
  iommu-api: Remove iommu_{un}map_range functions
  x86/amd-iommu: Implement ->{un}map callbacks for iommu-api
  x86/amd-iommu: Make amd_iommu_iova_to_phys aware of multiple page sizes
  x86/amd-iommu: Make iommu_unmap_page and fetch_pte aware of page sizes
  x86/amd-iommu: Make iommu_map_page and alloc_pte aware of page sizes
  kvm: Change kvm_iommu_map_pages to map large pages
  VT-d: Change {un}map_range functions to implement {un}map interface
  iommu-api: Add ->{un}map callbacks to iommu_ops
  iommu-api: Add iommu_map and iommu_unmap functions
  iommu-api: Rename ->{un}map function pointers to ->{un}map_range
2010-05-18 07:22:37 -07:00
Geert Uytterhoeven 0b7f1a7efb platform: Make platform resource input parameters const
Make the platform resource input parameters of platform_device_add_resources()
and platform_device_register_simple() const, as the resources are copied and
never modified.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-17 21:37:40 +02:00
Paul Mundt b9e3fc29c0 Merge branch 'sh/driver-core' 2010-05-13 18:02:28 +09:00
Paul Mundt 06fe53beb6 driver core: Early dev_name() depends on slab_is_available().
The early dev_name() setup needs to do an allocation which can only be
satisfied under slab_is_available() conditions. Some of the early
platform drivers may be initialized before this point, and those still
need to contend themselves with an empty dev_name.

This fixes up a regression with the SH earlyprintk which was bailing out
prior to hitting the early probe path due to not being able to satisfy
the early allocation. Other early platform drivers (such as the early
timers) that need to match the dev name are sufficiently late that
allocations are already possible.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13 17:56:56 +09:00
Joerg Roedel 795e74f7a6 Merge branch 'iommu/largepages' into amd-iommu/2.6.35
Conflicts:
	arch/x86/kernel/amd_iommu.c
2010-05-11 17:40:57 +02:00
Mark Brown 543f2503a9 PM / platform_bus: Allow runtime PM by default
Currently the default runtime PM callbacks for platform devices return
-ENOSYS, preventing the use of runtime PM platforms until they have
provided at least a default implementation. This hinders the use of
runtime PM by devices which work with many platforms such as memory
mapped devices, MFDs and on chip IPs shared by multiple architectures.

Change the default implementation to the standard pm_generic_runtime
one, allowing drivers to use runtime PM without per-architecture
changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:10:13 +02:00
Dominik Brodowski c92445fadb PM / Runtime: Add sysfs debug files
Add a few sysfs files relating to runtime power management for
advanced debug purposes:

runtime_enabled: is runtime PM enabled for this device? States
	are "enabled", "disabled", "forbidden" or a combination
	of the latter two.

runtime_status:	what state is the device in currently? E.g., it
	reports "suspended" for runtime-suspended devices, and
        "active" for active devices. NOTE: if runtime_enabled
	returns "disabled", the value of this file may not
	reflect its physical state.

runtime_usage: the runtime PM usage count of a device

runtime_active_kids: the runtime PM children usage count of a device, or
	0 if the ignore_children flag is set.

Also, CONFIG_PM_SLEEP_ADVANCED_DEBUG is not defined in any Kconfig
file, so replace it with CONFIG_PM_ADVANCED_DEBUG.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:17 +02:00
Alan Stern 240c7337a4 PM: Allow runtime_suspend methods to call pm_schedule_suspend()
This patch (as1361) changes the runtime PM interface slightly; it
allows suspend requests to be scheduled while the runtime_suspend
method is running.  If the method succeeds then the scheduled request
is cancelled, whereas if the method fails then an idle notification is
sent only if no request was scheduled.

Being able to schedule suspend requests from within a runtime_suspend
method is useful for drivers that need to test for idleness and
suspend the device all while holding a single spinlock, or for drivers
that want to check for idleness by polling.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:16 +02:00
Paul Mundt e19553427c Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/kernel/dwarf.c
	drivers/dma/shdma.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26 16:08:27 +09:00
Linus Torvalds 4dc86ae1f9 Revert "memory-hotplug: add 0x prefix to HEX block_size_bytes"
This reverts commit ba168fc37d.

It changes user-visible sysfs interfaces, and breaks some existing user
space applications which apparently rely on the fact that the output
does not contain the "0x" prefix.

Requested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-09 10:05:33 -07:00
Tejun Heo 18e5b539b4 nodemask: include slab.h from drivers/base/node.c
NODEMASK_ALLOC/FREE are mapped to kmalloc/free if NODES_SHIFT > 8.
Among its several users, drivers/base/node.c wasn't including slab.h
leading to build failure if NODES_SHIFT > 8.  Include slab.h from
drivers/base/node.c.

This isn't an ideal solution but including slab.h directly from
nodemask.h is not an option because nodemask.h gets included
everywhere.  For now, make it work by including slab.h from its users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
2010-04-07 06:41:41 +09:00
Linus Torvalds 7da23b86e1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla1280: retain firmware for error recovery
  [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init
  [SCSI] advansys: fix regression with request_firmware change
  [SCSI] qla2xxx: Updated version number to 8.03.02-k2.
  [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.
  [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.
  [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time.
  [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.
  [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.
  [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline
  [SCSI] libiscsi: Fix recovery slowdown regression
2010-04-05 15:37:12 -07:00
Paul Mundt 94a46d3cde Merge branch 'sh/stable-updates' 2010-04-05 12:21:09 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Paul Mundt 720fcb36ac Merge branches 'sh/intc-extension', 'sh/dmaengine', 'sh/serial-dma' and 'sh/clkfwk'
Conflicts:
	arch/sh/kernel/cpu/clock.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-30 11:26:43 +09:00
Paul Mundt bd05086bbe driver core: Convert to kasprintf() for early dev_name().
This is just a simple refactoring patch on top of the early dev_name()
support, converting from kstrdup() to kasprintf() as suggested by Kay.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 15:51:35 +09:00
James Bottomley ebd09ec93c [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init
All of the SCSI transport classes are suddenly spitting lockdep
warnings.  According to Eric Biderman this is because lockdep needs
static initialisers and the attribute container way of doing things
end up with dynamic sysfs attributes.  Fix this by calling
sysfs_attr_init which sets the lockdep key correctly.

Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27 15:15:24 -04:00
Dominik Brodowski e7176a37d4 power: support _noirq actions on device types and classes
The new-style dev_pm_ops provide callbacks for both IRQs enabled
and disabled. However, the _noirq variants were only called for
buses registered with a device, not for classes and types.

In order to properly use dev_pm_ops in class pcmcia_socket_class,
support _noirq actions also on classes and types.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-03-24 11:00:02 +01:00
Linus Torvalds 2eb645e7b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  driver core: numa: fix BUILD_BUG_ON for node_read_distance
  driver-core: document ERR_PTR() return values
  kobject: documentation: Update to refer to kset-example.c.
  sysdev: the cpu probe/release attributes should be sysdev_class_attributes
  kobject: documentation: Fix erroneous example in kobject doc.
  driver-core: fix missing kernel-doc in firmware_class
  Driver core: Early platform kernel-doc update
  sysfs: fix sysfs lockdep warning in mlx4 code
  sysfs: fix sysfs lockdep warning in infiniband code
  sysfs: fix sysfs lockdep warning in ipmi code
  sysfs: Initialised pci bus legacy_mem field before use
  sysfs: use sysfs_bin_attr_init in firmware class driver
2010-03-19 13:39:42 -07:00
David Rientjes 12ee3c0a0a driver core: numa: fix BUILD_BUG_ON for node_read_distance
node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when
the number of nodes printed will exceed the buffer length.

Each node only needs four chars: three for distance (maximum distance is
255) and one for a seperating space or a trailing newline.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:22 -07:00
Jani Nikula f0eae0ed3b driver-core: document ERR_PTR() return values
A number of functions in the driver core return ERR_PTR() values on
error. Document this in the kernel-doc of the functions.

Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:21 -07:00
Stephen Rothwell 67fc233f4f sysdev: the cpu probe/release attributes should be sysdev_class_attributes
This fixes these warnings:

drivers/base/cpu.c:264: warning: initialization from incompatible pointer type
drivers/base/cpu.c:265: warning: initialization from incompatible pointer type

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:19 -07:00
Randy Dunlap e59817bf08 driver-core: fix missing kernel-doc in firmware_class
Fix kernel-doc warning in firmware_class.c:

Warning(drivers/base/firmware_class.c:94): No description found for parameter 'attr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:16 -07:00
Magnus Damm 4d26e139f0 Driver core: Early platform kernel-doc update
This patch updates the kernel-doc notation for early
platform functions.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:16 -07:00
Jiri Kosina e1955ca0ee sysfs: use sysfs_bin_attr_init in firmware class driver
Annotate dynamic sysfs attribute in fw_setup_device(). This gets
rid of the following lockdep warning:

bnx2 0000:08:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw
BUG: key ffff880008293470 not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2706 lockdep_init_map+0x562/0x620()
Modules linked in: bnx2(+) sg tpm_bios floppy rtc_lib usb_storage i2c_piix4 joydev button container shpchp i2c_core sr_mod cdrom pci_hotplug usbhid hid ohci_hcd ehci_hcd sd_mod usbcore edd ext3 mbcache jbd fan ata_generic sata_svw pata_serverworks libata scsi_mod thermal processor
Pid: 1915, comm: work_for_cpu Not tainted 2.6.34-rc1-default #81
Call Trace:
 [<ffffffff8107c1d2>] ? lockdep_init_map+0x562/0x620
 [<ffffffff81049fd8>] warn_slowpath_common+0x78/0xd0
 [<ffffffff8104a03f>] warn_slowpath_null+0xf/0x20
 [<ffffffff8107c1d2>] lockdep_init_map+0x562/0x620
 [<ffffffff8117a236>] ? sysfs_new_dirent+0x76/0x120
 [<ffffffff8126edb2>] ? put_device+0x12/0x20
 [<ffffffff811797cc>] sysfs_add_file_mode+0x6c/0xd0
 [<ffffffff8117983c>] sysfs_add_file+0xc/0x10
 [<ffffffff8117bf61>] sysfs_create_bin_file+0x21/0x30
 [<ffffffff81279c61>] _request_firmware+0x2f1/0x650
 [<ffffffff8127a04e>] request_firmware+0xe/0x10
 [<ffffffffa01ec19e>] bnx2_init_one+0x8f5/0x177e [bnx2]
 [<ffffffff81389eab>] ? _raw_spin_unlock_irq+0x2b/0x40
 [<ffffffff81040ed9>] ? finish_task_switch+0x69/0x100
 [<ffffffff81040e70>] ? finish_task_switch+0x0/0x100
 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30
 [<ffffffff811e6302>] local_pci_probe+0x12/0x20
 [<ffffffff81064b53>] do_work_for_cpu+0x13/0x30
 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30
 [<ffffffff81068c56>] kthread+0x96/0xa0
 [<ffffffff81003e64>] kernel_thread_helper+0x4/0x10
 [<ffffffff8138a350>] ? restore_args+0x0/0x30
 [<ffffffff81068bc0>] ? kthread+0x0/0xa0
 [<ffffffff81003e60>] ? kernel_thread_helper+0x0/0x10
---[ end trace a2ecee9c9602d195 ]---

Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:10 -07:00
Heiko Carstens bc32df0089 memory hotplug: allow setting of phys_device
/sys/devices/system/memory/memoryX/phys_device is supposed to contain the
number of the physical device that the corresponding piece of memory
belongs to.

In case a physical device should be replaced or taken offline for whatever
reason it is necessary to set all corresponding memory pieces offline.
The current implementation always sets phys_device to '0' and there is no
way or hook to change that.  Seems like there was a plan to implement that
but it wasn't finished for whatever reason.

So add a weak function which architectures can override to actually set
the phys_device from within add_memory_block().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Paul Mundt a636ee7fb3 driver core: Early dev_name() support.
Presently early platform devices suffer from the fact they are unable to
use dev_xxx() calls early on due to dev_name() and others being
unavailable at the time ->probe() is called.

This implements early init_name construction from the matched name/id
pair following the semantics of the late device/driver match. As a
result, matched IDs (inclusive of requested ones) are preserved when the
handoff from the early platform code happens at kobject initialization
time.

Since we still require kmalloc slabs to be available at this point, using
kstrdup() for establishing the init_name works fine. This subsequently
needs to be tested from dev_name() prior to the init_name being cleared
by the driver core. We don't kfree() since others will already have a
handle on the string long before the kobject initialization takes place.

This is also needed to permit drivers to use the clock framework early,
without having to manually construct their own device IDs from the match
id/name pair locally (needed by the early console and timer code on sh
and arm).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-10 13:08:32 +09:00
Greg Kroah-Hartman 8e9394ce24 Driver core: create lock/unlock functions for struct device
In the future, we are going to be changing the lock type for struct
device (once we get the lockdep infrastructure properly worked out)  To
make that changeover easier, and to possibly burry the lock in a
different part of struct device, let's create some functions to lock and
unlock a device so that no out-of-core code needs to be changed in the
future.

This patch creates the device_lock/unlock/trylock() functions, and
converts all in-tree users to them.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Alex Chiang <achiang@hp.com>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: CHENG Renquan <rqcheng@smu.edu.sg>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Frans Pop <elendil@planet.nl>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:52 -08:00
Eric W. Biederman 2354dcc721 driver core: Use sysfs_rename_link in device_rename
Don't open code the renaming of symlinks in sysfs
instead use the new helper function sysfs_rename_link

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:52 -08:00
Ben Hutchings 3c31f07ad0 Driver core: Fix first line of kernel-doc for a few functions
The function name must be followed by a space, hypen, space, and a
short description.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:51 -08:00
Uwe Kleine-König 831fad2f75 Driver core: make struct platform_driver.id_table const
This fixes a warning on several pxa based machines:

	arch/arm/mach-pxa/ssp.c:475: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Vikram Dhillon <dhillonv10@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Emese Revfy 52cf25d0ab Driver core: Constify struct sysfs_ops in struct kobj_type
Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Greg Kroah-Hartman 6c1733aca0 sysdev: fix up the probe/release attributes
These should be sysdev attributes, not class attributes.  This patch
should resolve the problem.

Thanks to Stephen Rothwell for pointing out the problem.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Emese Revfy 9cd43611cc kobject: Constify struct kset_uevent_ops
Constify struct kset_uevent_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Luis R. Rodriguez 985fc176a6 driver-core: firmware_class: remove base.h header inclusion
base.h is used by base drivers for sharing internal structures.
Turns out firmware_class does not depend on it at all so remove it.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Kay Sievers 3f5468c9ae Driver-Core: require valid action string in uevent trigger
No longer fall back to "add" and warn, but always require a valid
action-string written to the "uevent" file.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Kay Sievers 7934779a69 Driver-Core: disable /sbin/hotplug by default
No recent mainstream system uses the /sbin/hotplug fork-bomb any more.
Disable it by default to reflect how it is used these days.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Kay Sievers 4237e5fd3e Driver-Core: devtmpfs - remove EXPERIMENTAL and flush out the description
All major distros enable devtmpfs on recent systems, so remove
the EXPERIMENTAL flag, and make the description a bit more instructive.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Kay Sievers 5e31d76f28 Driver-Core: devtmpfs - reset inode permissions before unlinking
Before unlinking the inode, reset the current permissions of possible
references like hardlinks, so granted permissions can not be retained
across the device lifetime by creating hardlinks, in the unusual case
that there is a user-writable directory on the same filesystem.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Andi Kleen 869dfc875e driver core: Add class_attr_string for simple read-only string
Several drivers just export a static string as class attributes.

Use the new extensible attribute support to define a simple
CLASS_ATTR_STRING() macro for this.

This will allow to remove code from drivers in followon patches.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Andi Kleen 28812fe11a driver-core: Add attribute argument to class_attribute show/store
Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.

Also drivers can extend the attributes with own data fields
and use that in the low level function.

This makes the class attributes the same as sysdev_class attributes
and plain attributes.

This will allow further cleanups in drivers.

Full tree sweep converting all users.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Andi Kleen 8564a6c140 sysdev: Fix type of sysdev class attribute in memory driver
This attribute is really a sysdev_class attribute, not a plain class attribute.

They are identical in layout currently, but this might not always be 
the case.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Andi Kleen 3701cde6e3 sysdev: Use sysdev_class attribute arrays in node driver
Convert the node driver to sysdev_class attribute arrays. This
greatly cleans up the code and remove a lot of code.

Saves ~150 bytes of code on x86-64.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Andi Kleen e1a7e29a26 sysdev: Convert node driver
Use sysdev_class attribute arrays in node driver

Convert the node driver to sysdev_class attribute arrays. This
greatly cleans up the code and remove a lot of code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Andi Kleen 38457ab3a0 sysfs: Add attribute array to sysdev classes
Add a attribute array that is automatically registered and unregistered
to struct sysdev_class. This is similar to what struct class has.

A lot of drivers add list of attributes, so it's better to do 
this easily in the common sysdev layer.

This adds a new field to struct sysdev_class. I audited the 
whole tree and there are no dynamically allocated sysdev classes,
so this is fully compatible. 

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Andi Kleen 265d2e2e31 sysdev: Convert cpu driver sysdev class attributes
Using the new attribute argument convert the cpu driver class attributes
to carry the node state. Then use a shared function to do what a lot of
individual functions did before.

This eliminates an ugly macro.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Andi Kleen b15f562fc2 sysdev: Convert node driver class attributes to be data driven
Using the new attribute argument convert the node driver class
attributes to carry the node state. Then use a shared function to do
what a lot of individual functions did before.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Andi Kleen c9be0a36f9 sysdev: Pass attribute in sysdev_class attributes show/store
Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.

Also drivers can extend the attributes with own data fields
and use that in the low level function.

Similar to sysdev_attributes and normal attributes.

This is a tree-wide sweep, converting everything in one go.

No functional changes in this patch other than passing the new
argument everywhere.

Tested on x86, the non x86 parts are uncompiled.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:47 -08:00
Dmitry Torokhov ecdf6ceb8c Driver core: add platform_create_bundle() helper
Many legacy-style module create singleton platform devices themselves,
along with corresponding platform driver. Instead of replicating error
handling code in all such drivers, provide a helper that allocates and
registers a single platform device and a driver and binds them together.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:46 -08:00
Tejun Heo 77d3d7c1d5 driver-core: fix race condition in get_device_parent()
sysfs is creating several devices in cuse class concurrently and with
CONFIG_SYSFS_DEPRECATED turned off, it triggers the following oops.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: [<ffffffff81158b0a>] sysfs_addrm_start+0x4a/0xf0
 PGD 75bb067 PUD 75be067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP
 last sysfs file: /sys/devices/system/cpu/cpu7/topology/core_siblings
 CPU 1
 Modules linked in: cuse fuse
 Pid: 4737, comm: osspd Not tainted 2.6.31-work #77
 RIP: 0010:[<ffffffff81158b0a>]  [<ffffffff81158b0a>] sysfs_addrm_start+0x4a/0xf0
 RSP: 0018:ffff88000042f8f8  EFLAGS: 00010296
 RAX: ffff88000042ffd8 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff880007eef660 RDI: 0000000000000001
 RBP: ffff88000042f918 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: ffffffff81158b0a R12: ffff88000042f928
 R13: 00000000fffffff4 R14: 0000000000000000 R15: ffff88000042f9a0
 FS:  00007fe93905a950(0000) GS:ffff880008600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000038 CR3: 00000000077c9000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process osspd (pid: 4737, threadinfo ffff88000042e000, task ffff880007eef040)
 Stack:
  ffff880005da10e8 0000000011cc8d6e ffff88000042f928 ffff880003d28a28
 <0> ffff88000042f988 ffffffff811592d7 0000000000000000 0000000000000000
 <0> 0000000000000000 0000000000000000 ffff88000042f958 0000000011cc8d6e
 Call Trace:
  [<ffffffff811592d7>] create_dir+0x67/0xe0
  [<ffffffff811593a8>] sysfs_create_dir+0x58/0xb0
  [<ffffffff8128ca7c>] ? kobject_add_internal+0xcc/0x220
  [<ffffffff812942e1>] ? vsnprintf+0x3c1/0xb90
  [<ffffffff8128cab7>] kobject_add_internal+0x107/0x220
  [<ffffffff8128cd37>] kobject_add_varg+0x47/0x80
  [<ffffffff8128ce53>] kobject_add+0x53/0x90
  [<ffffffff81357d84>] device_add+0xd4/0x690
  [<ffffffff81356c2b>] ? dev_set_name+0x4b/0x70
  [<ffffffffa001a884>] cuse_process_init_reply+0x2b4/0x420 [cuse]
  ...

The problem is that kobject_add_internal() first adds a kobject to the
kset and then try to create sysfs directory for it.  If the creation
fails, it remove the kobject from the kset.  get_device_parent()
accesses class_dirs kset while only holding class_dirs.list_lock to
see whether the cuse class dir exists.  But when it exists, it may not
have finished initialization yet or may fail and get removed soon.  In
the above case, the former happened so the second one ends up trying
to create subdirectory under NULL sysfs_dirent.

Fix it by grabbing a mutex in get_device_parent().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Colin Guthrie <cguthrie@mandriva.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:46 -08:00
Joerg Roedel 12c7389abe iommu-api: Remove iommu_{un}map_range functions
These functions are not longer used and can be removed
savely. There functionality is now provided by the
iommu_{un}map functions which are also capable of multiple
page sizes.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-03-07 18:01:13 +01:00
Joerg Roedel 6765178694 iommu-api: Add ->{un}map callbacks to iommu_ops
This patch adds new callbacks for mapping and unmapping
pages to the iommu_ops structure. These callbacks are aware
of page sizes which makes them different to the
->{un}map_range callbacks.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-03-07 18:01:11 +01:00
Joerg Roedel cefc53c7f4 iommu-api: Add iommu_map and iommu_unmap functions
These two functions provide support for mapping and
unmapping physical addresses to io virtual addresses. The
difference to the iommu_(un)map_range() is that the new
functions take a gfp_order parameter instead of a size. This
allows the IOMMU backend implementations to detect easier if
a given range can be mapped by larger page sizes.
These new functions should replace the old ones in the long
term.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-03-07 18:01:11 +01:00
Joerg Roedel 4abc14a733 iommu-api: Rename ->{un}map function pointers to ->{un}map_range
The new function pointer names match better with the
top-level functions of the iommu-api which are using them.
Main intention of this change is to make the ->{un}map
pointer names free for two new mapping functions.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-03-07 18:01:11 +01:00
Rafael J. Wysocki d690b2cd22 PM: Provide generic subsystem-level callbacks
There are subsystems whose power management callbacks only need to
invoke the callbacks provided by device drivers.  Still, their system
sleep PM callbacks should play well with the runtime PM callbacks,
so that devices suspended at run time can be left in that state for
a system sleep transition.

Provide a set of generic PM callbacks for such subsystems and
define convenience macros for populating dev_pm_ops structures.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-03-06 21:28:37 +01:00
Rafael J. Wysocki f8824cee40 PM: Allow device drivers to use dpm_wait()
There are some dependencies between devices (in particular, between
EHCI USB controllers and their OHCI/UHCI siblings) which are not
reflected by the structure of the device tree.  With synchronous
suspend and resume these dependencies are taken into accout
automatically, because the devices in question are always registered
in the right order, but to meet these constraints with asynchronous
suspend and resume the drivers of these devices will need to use
dpm_wait() in their suspend/resume routines, so introduce a helper
function allowing them to do that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:11 +01:00