For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.
Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This patch adds sysctl for the same.
Logs:
For IPv4:
Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
metric 4261413864
IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m
i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.
After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705
IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high
Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m
If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.
$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704
IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]
Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The BIT macro is not available in userspace, so replace BIT(0) by
0x00000001.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 6446ec6cbf ("media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctl")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Following RFC 6554 [1], the current order of fields is wrong for big
endian definition. Indeed, here is how the header looks like:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
This patch reorders fields so that big endian definition is now correct.
[1] https://tools.ietf.org/html/rfc6554#section-3
Fixes: cfa933d938 ("include: uapi: linux: add rpl sr header definition")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add user space api for bcm-vk driver.
Provide ioctl api to load images and issue reset command to card.
FW status registers in PCI BAR space also defined as part
of API so that user space is able to interpret these memory locations
as needed via direct PCIe access.
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-2-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAOFRIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4lcH/jFAG+AXR6T2K3dG
adJmdAWQKdDj71Ruoyefx5GSbD0B+rM1UcxOQgmZem2127RJgfDBBVYyjSwh7H1F
LRJdN6+NKReL2OW/HMnufvpVMvWICTWHInyvsqKqp+Yo4GC5z46OtsmzSayYgTaP
v2G9auC/rSUlzmQux9EAbTKDeNGMum3dt2rfsmnIDymBSHoPbizXF93/2hoo9jwx
BZQCq0nYBCa9pEdsmgvqKkb/Y5+CSFoe02qdUZFIuwh6qd/XPfeDPSu4O3z4J9g6
x8G+f7doeU0nzsAP+K0lG7ulAygxRHm5Bn2rwVdlYfihAuPNyF+Ua3duxBvjOBEY
7w/UQ64=
=ZWS9
-----END PGP SIGNATURE-----
Merge tag 'v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce a new mount bind mount property to allow idmapping mounts. The
MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall
together with a file descriptor referring to a user namespace.
The user namespace referenced by the namespace file descriptor will be
attached to the bind mount. All interactions with the filesystem going
through that mount will be mapped according to the mapping specified in
the user namespace attached to it.
Using user namespaces to mark mounts means we can reuse all the existing
infrastructure in the kernel that already exists to handle idmappings
and can also use this for permission checking to allow unprivileged user
to create idmapped mounts in the future.
Idmapping a mount is decoupled from the caller's user and mount
namespace. This means idmapped mounts can be created in the initial
user namespace which is an important use-case for systemd-homed,
portable usb-sticks between systems, sharing data between the initial
user namespace and unprivileged containers, and other use-cases that
have been brought up. For example, assume a home directory where all
files are owned by uid and gid 1000 and the home directory is brought to
a new laptop where the user has id 12345. The system administrator can
simply create a mount of this home directory with a mapping of
1000:12345:1 and other mappings to indicate the ids should be kept.
(With this it is e.g. also possible to create idmapped mounts on the
host with an identity mapping 1:1:100000 where the root user is not
mapped. A user with root access that e.g. has been pivot rooted into
such a mount on the host will be not be able to execute, read, write, or
create files as root.)
Given that mapping a mount is decoupled from the caller's user namespace
a sufficiently privileged process such as a container manager can set up
an idmapped mount for the container and the container can simply pivot
root to it. There's no need for the container to do anything. The mount
will appear correctly mapped independent of the user namespace the
container uses. This means we don't need to mark a mount as idmappable.
In order to create an idmapped mount the caller must currently be
privileged in the user namespace of the superblock the mount belongs to.
Once a mount has been idmapped we don't allow it to change its mapping.
This keeps permission checking and life-cycle management simple. Users
wanting to change the idmapped can always create a new detached mount
with a different idmapping.
Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This implements the missing mount_setattr() syscall. While the new mount
api allows to change the properties of a superblock there is currently
no way to change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on. In addition the old
mount api has the restriction that mount options cannot be applied
recursively. This hasn't changed since changing mount options on a
per-mount basis was implemented in [1] and has been a frequent request
not just for convenience but also for security reasons. The legacy
mount syscall is unable to accommodate this behavior without introducing
a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND |
MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost
mount. Changing MS_REC to apply to the whole mount tree would mean
introducing a significant uapi change and would likely cause significant
regressions.
The new mount_setattr() syscall allows to recursively clear and set
mount options in one shot. Multiple calls to change mount options
requesting the same changes are idempotent:
int mount_setattr(int dfd, const char *path, unsigned flags,
struct mount_attr *uattr, size_t usize);
Flags to modify path resolution behavior are specified in the @flags
argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW,
and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to
restrict path resolution as introduced with openat2() might be supported
in the future.
The mount_setattr() syscall can be expected to grow over time and is
designed with extensibility in mind. It follows the extensible syscall
pattern we have used with other syscalls such as openat2(), clone3(),
sched_{set,get}attr(), and others.
The set of mount options is passed in the uapi struct mount_attr which
currently has the following layout:
struct mount_attr {
__u64 attr_set;
__u64 attr_clr;
__u64 propagation;
__u64 userns_fd;
};
The @attr_set and @attr_clr members are used to clear and set mount
options. This way a user can e.g. request that a set of flags is to be
raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in
@attr_set while at the same time requesting that another set of flags is
to be lowered such as removing noexec from a mount tree by specifying
MOUNT_ATTR_NOEXEC in @attr_clr.
Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0,
not a bitmap, users wanting to transition to a different atime setting
cannot simply specify the atime setting in @attr_set, but must also
specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that
MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set
can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in
@attr_clr.
The @propagation field lets callers specify the propagation type of a
mount tree. Propagation is a single property that has four different
settings and as such is not really a flag argument but an enum.
Specifically, it would be unclear what setting and clearing propagation
settings in combination would amount to. The legacy mount() syscall thus
forbids the combination of multiple propagation settings too. The goal
is to keep the semantics of mount propagation somewhat simple as they
are overly complex as it is.
The @userns_fd field lets user specify a user namespace whose idmapping
becomes the idmapping of the mount. This is implemented and explained in
detail in the next patch.
[1]: commit 2e4b7fcd92 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
None of these are actually used in the kernel/userspace interface -
there's a userspace component of implementing MRP, and userspace will
need to construct certain frames to put on the wire, but there's no
reason the kernel should provide the relevant definitions in a UAPI
header.
In fact, some of those definitions were broken until previous commit,
so only keep the few that are actually referenced in the kernel code,
and move them to the br_private_mrp.h header.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wireshark says that the MRP test packets cannot be decoded - and the
reason for that is that there's a two-byte hole filled with garbage
between the "transitions" and "timestamp" members.
So Wireshark decodes the two garbage bytes and the top two bytes of
the timestamp written by the kernel as the timestamp value (which thus
fluctuates wildly), and interprets the lower two bytes of the
timestamp as a new (type, length) pair, which is of course broken.
Even though this makes the timestamp field in the struct unaligned, it
actually makes it end up on a 32 bit boundary in the frame as mandated
by the standard, since it is preceded by a two byte TLV header.
The struct definitions live under include/uapi/, but they are not
really part of any kernel<->userspace API/ABI, so fixing the
definitions by adding the packed attribute should not cause any
compatibility issues.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HTB doesn't scale well because of contention on a single lock, and it
also consumes CPU. This patch adds support for offloading HTB to
hardware that supports hierarchical rate limiting.
In the offload mode, HTB passes control commands to the driver using
ndo_setup_tc. The driver has to replicate the whole hierarchy of classes
and their settings (rate, ceil) in the NIC. Every modification of the
HTB tree caused by the admin results in ndo_setup_tc being called.
After this setup, the HTB algorithm is done completely in the NIC. An SQ
(send queue) is created for every leaf class and attached to the
hierarchy, so that the NIC can calculate and obey aggregated rate
limits, too. In the future, it can be changed, so that multiple SQs will
back a single leaf class.
ndo_select_queue is responsible for selecting the right queue that
serves the traffic class of each packet.
The data path works as follows: a packet is classified by clsact, the
driver selects a hardware queue according to its class, and the packet
is enqueued into this queue's qdisc.
This solution addresses two main problems of scaling HTB:
1. Contention by flow classification. Currently the filters are attached
to the HTB instance as follows:
# tc filter add dev eth0 parent 1:0 protocol ip flower dst_port 80
classid 1:10
It's possible to move classification to clsact egress hook, which is
thread-safe and lock-free:
# tc filter add dev eth0 egress protocol ip flower dst_port 80
action skbedit priority 1:10
This way classification still happens in software, but the lock
contention is eliminated, and it happens before selecting the TX queue,
allowing the driver to translate the class to the corresponding hardware
queue in ndo_select_queue.
Note that this is already compatible with non-offloaded HTB and doesn't
require changes to the kernel nor iproute2.
2. Contention by handling packets. HTB is not multi-queue, it attaches
to a whole net device, and handling of all packets takes the same lock.
When HTB is offloaded, it registers itself as a multi-queue qdisc,
similarly to mq: HTB is attached to the netdev, and each queue has its
own qdisc.
Some features of HTB may be not supported by some particular hardware,
for example, the maximum number of classes may be limited, the
granularity of rate and ceil parameters may be different, etc. - so, the
offload is not enabled by default, a new parameter is used to enable it:
# tc qdisc replace dev eth0 root handle 1: htb offload
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_recvmsg() uses the CMSG mechanism to receive control information
like packet receive timestamps. This patch adds CMSG fields to
struct tcp_zerocopy_receive, and provides receive timestamps
if available to the user.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds TCP_NLA_TTL to SCM_TIMESTAMPING_OPT_STATS that exports
the time-to-live or hop limit of the latest incoming packet with
SCM_TSTAMP_ACK. The value exported may not be from the packet that acks
the sequence when incoming packets are aggregated. Exporting the
time-to-live or hop limit value of incoming packets helps to estimate
the hop count of the path of the flow that may change over time.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210120204155.552275-1-ysseung@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink port function can be in active or inactive state.
Allow users to get and set port function's state.
When the port function it activated, its operational state may change
after a while when the device is created and driver binds to it.
Similarly on deactivation flow.
To clearly describe the state of the port function and its device's
operational state in the host system, define state and opstate
attributes.
Example of a PCI SF port which supports a port function:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"external": false,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A PCI sub-function (SF) represents a portion of the device similar
to PCI VF.
In an eswitch, PCI SF may have port which is normally represented
using a representor netdevice.
To have better visibility of eswitch port, its association with SF,
and its representor netdevice, introduce a PCI SF port flavour.
When devlink port flavour is PCI SF, fill up PCI SF attributes of the
port.
Extend port name creation using PCI PF and SF number scheme on best
effort basis, so that vendor drivers can skip defining their own
scheme.
This is done as cApfNSfM, where A, N and M are controller, PCI PF and
PCI SF number respectively.
This is similar to existing naming for PCI PF and PCI VF ports.
An example view of a PCI SF port:
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state active opstate attached
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Gen12 display can decompress surfaces compressed by render engine with
Clear Color, add a new modifier as the driver needs to know the surface
was compressed by render engine.
V2: Description changes as suggested by Rafael.
V3: Mention the Clear Color size of 64 bits in the comments(DK)
v4: Fix trailing whitespaces
v5: Explain Clear Color in the documentation.
v6: Documentation Nitpicks(Nanley)
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Kalyan Kondapally <kalyan.kondapally@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114201314.783648-2-imre.deak@intel.com
Some I2C bus master drivers which support I2C_M_RECV_LEN do not set
the functionality bits of the now supported SMBus transfers. Add a
convenience macro to make this very simple.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Remove boilerplate because we now have the SPDX header.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Remove boilerplate because we now have the SPDX header.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The information about 'i2c_msg' was spread between kdoc and comments.
Move all the explanations to kdoc and duplicate only the requirements
for the flags in the comments. Also, add some redundancy and fix some
typos while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This patch add the TCA_FLOWER_KEY_CT_FLAGS_INVALID flag to
match the ct_state with invalid for conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/1611045110-682-1-git-send-email-wenxu@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement a new uverbs ioctl method for memory registration with file
descriptor as an extra parameter.
Link: https://lore.kernel.org/r/1608067636-98073-4-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
-----BEGIN PGP SIGNATURE-----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=JIou
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com
This comes from an end-user request, where they're running multiple VMs on
hosts with bonded interfaces connected to some interest switch topologies,
where 802.3ad isn't an option. They're currently running a proprietary
solution that effectively achieves load-balancing of VMs and bandwidth
utilization improvements with a similar form of transmission algorithm.
Basically, each VM has it's own vlan, so it always sends its traffic out
the same interface, unless that interface fails. Traffic gets split
between the interfaces, maintaining a consistent path, with failover still
available if an interface goes down.
Unlike bond_eth_hash(), this hash function is using the full source MAC
address instead of just the last byte, as there are so few components to
the hash, and in the no-vlan case, we would be returning just the last
byte of the source MAC as the hash value. It's entirely possible to have
two NICs in a bond with the same last byte of their MAC, but not the same
MAC, so this adjustment should guarantee distinct hashes in all cases.
This has been rudimetarily tested to provide similar results to the
proprietary solution it is aiming to replace. A patch for iproute2 is also
posted, to properly support the new mode there as well.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Thomas Davis <tadavis@lbl.gov>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20210119010927.1191922-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PVRDMA device HW interface defines network_hdr_type according to an
old definition of the internal kernel rdma_network_type enum that has
since changed, resulting in the wrong rdma_network_type being reported.
Fix this by explicitly defining the enum used by the PVRDMA device and
adding a function to convert the pvrdma_network_type to rdma_network_type
enum.
Cc: stable@vger.kernel.org # 5.10+
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Link: https://lore.kernel.org/r/1611026189-17943-1-git-send-email-bryantan@vmware.com
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for USB 3.2 dual-lane support, add sublink speed
attribute macros and enum usb_ssp_rate. A USB device that operates in
SuperSpeed Plus may operate at different speed and lane count. These
additional macros and enum values help specifying that.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ae9293ebd63a29f2a2035054753534d9eb123d74.1610592135.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.
The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.
Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.
Signed-off-by: Pravin B Shelar <pbshelar@fb.com>
Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)
Avoid relying on last item ABI marker in i915_drm.h, add a
comment to mark as deprecated.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Restore clear residuals security mitigations for Ivybridge and
Baytrail (Chris)
- Close#1858: Allow sysadmin to choose applied GPU security mitigations
through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A 22010271021 permanent on DG1 (Lucas)
- Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)
- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)
- Restructure GT code organization for clearer split between GuC
and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)
- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
# drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/gvt/mmio_context.h
# drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com
Adding support to carry build id data in mmap2 event.
The build id data replaces maj/min/ino/ino_generation
fields, which are also used to identify map's binary,
so it's ok to replace them with build id data:
union {
struct {
u32 maj;
u32 min;
u64 ino;
u64 ino_generation;
};
struct {
u8 build_id_size;
u8 __reserved_1;
u16 __reserved_2;
u8 build_id[20];
};
};
Replaced maj/min/ino/ino_generation fields give us size
of 24 bytes. We use 20 bytes for build id data, 1 byte
for size and rest is unused.
There's new misc bit for mmap2 to signal there's build
id data in it:
#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-4-jolsa@kernel.org
This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.
There are two significant design decisions made for the CMPXCHG
instruction:
- To solve the issue that this operation fundamentally has 3
operands, but we only have two register fields. Therefore the
operand we compare against (the kernel's API calls it 'old') is
hard-coded to be R0. x86 has similar design (and A64 doesn't
have this problem).
A potential alternative might be to encode the other operand's
register number in the immediate field.
- The kernel's atomic_cmpxchg returns the old value, while the C11
userspace APIs return a boolean indicating the comparison
result. Which should BPF do? A64 returns the old value. x86 returns
the old value in the hard-coded register (and also sets a
flag). That means return-old-value is easier to JIT, so that's
what we use.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC
instructions, in order to have the previous value of the
atomically-modified memory location loaded into the src register
after an atomic op is carried out.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
This control indicates the priority id to be applied
to base layer.
[hverkuil: renumbered V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adds bitrate control for all coding layers for h264
same as hevc.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Adds min/max qp controls for B frame for h264.
- Adds min/max qp controls for I/P/B frames for hevc similar to h264.
- Update valid range of min/max qp for hevc to accommodate 10 bit.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the buffer is too small to contain the input string, these helpers
return the length of the buffer, not the length of the original string.
This tries to make the docs totally clear about that, since "the length
of the [copied ]string" could also refer to the length of the input.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112123422.2011234-1-jackmanb@google.com
Add V4L2 controls for controlling CCS lens shading correction as well as
conveying its capabilities.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add two new controls for alternative analogue gain some CCS compliant
camera sensors support.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add V4L2 controls for analogue gain constants required to control
analogue gain. The values are device specific and thus need to be obtained
from the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a control base for CCS controls, and reserve 128 controls. Luckily
these numbers are cheap.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add and document a media entity type for Image Signal Processor devices.
Surprisingly we didn't have one, so add one now. More or less all ISP
drivers should use this type instead of what they currently are using (or
not using anything).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The comment says the layout and options use 8 bits, and the shift
uses 8 bits. However the mask is 0xf, ie. 0b00001111 (4 bits).
This could be surprising when introducing new layouts or options
that take more than 4 bits, as this would silently drop the high
bits.
Make the masks consistent with the comment and the shift.
Found when writing a drm_info patch [1].
[1]: https://github.com/ascent12/drm_info/pull/67
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: d6528ec883 ("drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210110125103.15447-1-contact@emersion.fr
List of things fixed:
- Two of the socket options were idented with spaces instead of tabs.
- Trailing whitespace in some lines.
- Improper spacing around parenthesis caught by checkpatch.pl.
- Mix of space and tabs in tcp_word_hdr union.
Signed-off-by: Danilo Carvalho <doak@google.com>
Link: https://lore.kernel.org/r/20210108222104.2079472-1-doak@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/7KA0QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpn6WEACeUa97qyzm7G8/E5ejBL6lXSTRXNc8qa+h
YCdrDltkqs6OHAuEyUCwGw3zPmb7fp4M5RLZ/Dp9EtMwld45HfoN6mpRe0+i4U96
iAkHMNUo6ytp3wXX1XKgZ0FhcSOSwkQK8CMzmLPn+pxkDYzQPFg38AUISPpoDA/L
YNh4tEiHHd5oprHIzludE00m2i1oYNrBcmUe27sKxR0mak0kEJtxr4cXLrqBtN3k
9C31A0gstCINSHmQPAcRvFerDxDM0WPYQ7K6UEXfkCfbyf6i+1eG/qLUwUCdm9MD
Rjot6dXzQ2LzqJbaAZndjJRDRZx2xpC2TNlNaBjYzSOC6AXSY0MKiZBCnH/i/OoZ
f0Bq/k7LVeMbyu02cgIis4DPLabfG+XQUOniu4HQTrzK8+neApAlCwINc73cvQOb
hBS+LfUVqP6K6g3oVGSvqG01wj2HK69SWMNKTr9GZ3GIqrcWYtA/JnqFfTE7/KwC
H7rkPL8i3+NBXmjjz6hm8hx3MrnekKJpsdCBicm9OOYqJRbkGVjoUYeDFz5MElfp
k71u2WDQ81aiqfWajsJkZaUFxZgUrRzuWeyBZiQQP9kJEMzUUiDSg4K+0WJhk5bO
Y0EX0sdCz8k9IBKfi2+FcF5dYj3RDolALmBDrrcfchTW0h7vxMpn4rr/ueN7gViz
rW/Gj9pRsA==
=CClj
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
Here are some small char and misc driver fixes for 5.11-rc3.
the majority here are fixes for the habanalabs drivers, but also in here
are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJUw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3/wCfYVaYBcHzr0CATzOXEbtpBlMpkkMAn1M/pOET
6RuyBJCjONwT8g4BzOq1
=jlAi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.11-rc3.
The majority here are fixes for the habanalabs drivers, but also in
here are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
Fonts: font_ter16x32: Update font with new upstream Terminus release
misc: pvpanic: Check devm_ioport_map() for NULL
speakup: Add github repository URL and bug tracker
MAINTAINERS: Update Georgi's email address
crypto: asym_tpm: correct zero out potential secrets
habanalabs: Fix memleak in hl_device_reset
interconnect: imx8mq: Use icc_sync_state
interconnect: imx: Remove a useless test
interconnect: imx: Add a missing of_node_put after of_device_is_available
interconnect: qcom: fix rpmh link failures
habanalabs: fix order of status check
habanalabs: register to pci shutdown callback
habanalabs: add validation cs counter, fix misplaced counters
habanalabs/gaudi: retry loading TPC f/w on -EINTR
habanalabs: adjust pci controller init to new firmware
habanalabs: update comment in hl_boot_if.h
habanalabs/gaudi: enhance reset message
habanalabs: full FW hard reset support
habanalabs/gaudi: disable CGM at HW initialization
habanalabs: Revise comment to align with mirror list name
...
This patch added a new command MPTCP_PM_CMD_SET_FLAGS in PM netlink:
In mptcp_nl_cmd_set_flags, parse the input address, get the backup value
according to whether the address's FLAG_BACKUP flag is set from the
user-space. Then check whether this address had been added in the local
address list. If it had been, then call mptcp_nl_addr_backup to deal with
this address.
In mptcp_nl_addr_backup, traverse all the existing msk sockets to find
the relevant sockets, and call mptcp_pm_nl_mp_prio_send_ack to send out
a MP_PRIO ACK packet.
Finally in mptcp_nl_cmd_set_flags, set or clear the address's FLAG_BACKUP
flag.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET
was introduced into the incompat feature set. It used bucket_size_hi
(which was added at the tail of struct cache_sb_disk) to extend current
16bit bucket size to 32bit with existing bucket_size in struct
cache_sb_disk.
This is not a good idea, there are two obvious problems,
- Bucket size is always value power of 2, if store log2(bucket size) in
existing bucket_size of struct cache_sb_disk, it is unnecessary to add
bucket_size_hi.
- Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in
struct cache_sb_disk, bucket_size_hi was added after d[] which makes
csum_set calculate an unexpected super block checksum.
To fix the above problems, this patch introduces a new incompat feature
bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it
means bucket_size in struct cache_sb_disk stores the order of power-of-2
bucket size value. When user specifies a bucket size larger than 32768
sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to
incompat feature set, and bucket_size stores log2(bucket size) more
than store the real bucket size value.
The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore,
it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only
recognized by kernel driver for legacy compatible purpose. The previous
bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk
and not used in bcache-tools anymore.
For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature,
bcache-tools and kernel driver still recognize the feature string and
display it as "obso_large_bucket".
With this change, the unnecessary extra space extend of bcache on-disk
super block can be avoided, and csum_set() may generate expected check
sum as well.
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Fixes for the new scalable MMU
* Fixes for migration of nested hypervisors on AMD
* Fix for clang integrated assembler
* Fix for left shift by 64 (UBSAN)
* Small cleanups
* Straggler SEV-ES patch
ARM:
* VM init cleanups
* PSCI relay cleanups
* Kill CONFIG_KVM_ARM_PMU
* Fixup __init annotations
* Fixup reg_to_encoding()
* Fix spurious PMCR_EL0 access
* selftests cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/4YOMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMg0Qf/eGDOoLL18KhA9MpoPXusR5kU+82G
AcbFj9siNW46EF7mL+sw/xAx+gZaqSpIEmn/f6BzgiaUBdFTv9CKX3B54e43e59G
HAKD0NpqwvDIi1b0T6bcgC92mY3Qx/IDCc7/9JYjBs/iORfqyWW6xVtkF/Gfymxt
eK+MnfMqqNZODgR/cZnCH1E48fuwOvRMxLqilLi3OOMSUfs2cQOSLTNfYQYqjeaJ
dsQ4YeyPJO5JHtfHFr6VPIo/jDhowniac9CNvOomWWVIx2zPYVSl9d8ub6ESEPNF
GM7UeBCOMmZG/a3qFEZPAUJ7znW4yYE85Z6pjxlrGhd1I54MJi4dd+RApw==
=5Nfj
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for the new scalable MMU
- Fixes for migration of nested hypervisors on AMD
- Fix for clang integrated assembler
- Fix for left shift by 64 (UBSAN)
- Small cleanups
- Straggler SEV-ES patch
ARM:
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
Misc:
- selftests cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits)
KVM: x86: __kvm_vcpu_halt can be static
KVM: SVM: Add support for booting APs in an SEV-ES guest
KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode
KVM: nSVM: correctly restore nested_run_pending on migration
KVM: x86/mmu: Clarify TDP MMU page list invariants
KVM: x86/mmu: Ensure TDP MMU roots are freed after yield
kvm: check tlbs_dirty directly
KVM: x86: change in pv_eoi_get_pending() to make code more readable
MAINTAINERS: Really update email address for Sean Christopherson
KVM: x86: fix shift out of bounds reported by UBSAN
KVM: selftests: Implement perf_test_util more conventionally
KVM: selftests: Use vm_create_with_vcpus in create_vm
KVM: selftests: Factor out guest mode code
KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c
KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load
KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()
KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array
KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE
KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()
...
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.
Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.
First AP boot (first INIT-SIPI-SIPI sequence):
Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
support. It is up to the guest to transfer control of the AP to the
proper location.
Subsequent AP boot:
KVM will expect to receive an AP Reset Hold exit event indicating that
the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
awaken it. When the AP Reset Hold exit event is received, KVM will place
the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
sequence, KVM will make the vCPU runnable. It is again up to the guest
to then transfer control of the AP to the proper location.
To differentiate between an actual HLT and an AP Reset Hold, a new MP
state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
placed in upon receiving the AP Reset Hold exit event. Additionally, to
communicate the AP Reset Hold exit event up to userspace (if needed), a
new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.
A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.
Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
-----BEGIN PGP SIGNATURE-----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=hp3d
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.
Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com
UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.
Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.
Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.
-----BEGIN PGP SIGNATURE-----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=orEC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.
Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.
Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com
Add a misc-device providing user-space access to the Surface Aggregator
EC, mainly intended for debugging, testing, and reverse-engineering.
This interface gives user-space applications the ability to send
requests to the EC and receive the corresponding responses.
The device-file is managed by a pseudo platform-device and corresponding
driver to avoid dependence on the dedicated bus, allowing it to be
loaded in a minimal configuration.
A python library and scripts to access this device can be found at [1].
[1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-9-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
From the existing definitions it's unclear which stat to
use to report filtering based on L2 dst addr in old
broadcast-medium Ethernet.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
and bpf trees.
Current release - regressions:
- mt76: - usb: fix NULL pointer dereference in mt76u_status_worker
- sdio: fix NULL pointer dereference in mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: ipset: fixes possible oops in mtype_resize
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with
the Intel i219-LM Ethernet controllers to fix power
use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid
a deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- net-sysfs: take the rtnl lock around XPS configuration
- xsk: - fix memory leak for failed bind
- rollback reservation at NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: - fix use of incorrect min_headroom size
- fix false positive lockdep splat from the TX lock
- net: mvpp2: - clear force link UP during port init procedure
in case bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- net: stmmac: ignore the second clock input, current clock framework
does not handle exclusive clock use well, other drivers
may reconfigure the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N4/x
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
Sphinx doesn't like old doc-comments in drm.h and generates warnings
like:
./include/uapi/drm/drm.h:87: warning: cannot understand function prototype: 'struct drm_clip_rect '
./include/uapi/drm/drm.h:97: warning: cannot understand function prototype: 'struct drm_drawable_info '
./include/uapi/drm/drm.h:105: warning: cannot understand function prototype: 'struct drm_tex_region '
...
Demote these to regular comments, because converting all of them is
quite a lot of work (also requires documenting all of the struct fields
for instance). Also many of these structures aren't really used by
modern user-space.
We can easily convert these remaining old comments to Sphinx style on a
one-by-one basis.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-5-contact@emersion.fr
Our documentation build system chokes on \file comments:
./include/uapi/drm/drm.h:2: warning: Cannot understand * \file drm.h
on line 2 - I thought it was a doc line
Remove all of the slash-directives, and demote to a normal comment. Keep
the historical information because it predates Git.
v3: keep the comment (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-4-contact@emersion.fr
Now that we support non-blocking path resolution internally, expose it
via openat2() in the struct open_how ->resolve flags. This allows
applications using openat2() to limit path resolution to the extent that
it is already cached.
If the lookup cannot be satisfied in a non-blocking manner, openat2(2)
will return -1/-EAGAIN.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This new ioctl only returns the status byte (STB) that was originally
sent by the device due to a service request (SRQ) condition.
This ioctl checks the srq_asserted bit of the associated file
descriptor. If set, the srq_asserted bit is reset and the cached
STB with original SRQ information is returned. Otherwise the ioctl
returns the error code ENOMSG.
This ioctl is useful to support non USBTMC-488 compliant devices.
Time sensitive applications can read the cached STB without incurring
the cost of an urb transaction over the bus.
Tested-by: Jian-Wei Wu <jian-wei_wu@keysight.com>
Reviewed-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20201215155621.9592-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new ioctl reads the status byte (STB) from the device and returns
the STB unmodified to the application. The srq_asserted bit is not taken
into account and not changed.
This ioctl is useful to support non USBTMC-488 compliant devices.
Tested-by: Jian-Wei Wu <jian-wei_wu@keysight.com>
Reviewed-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20201215155621.9592-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Transmit/receive only is a valid SPI mode. For example, the MOSI/TX line
might be missing from an ADC while for a DAC the MISO/RX line may be
optional. This patch adds these two new modes: SPI_NO_TX and
SPI_NO_RX. This way, the drivers will be able to identify if any of
these two lines is missing and to adjust the transfers accordingly.
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201221152936.53873-2-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change moves all the SPI mode bits into a separate 'spi.h' header in
uAPI. This is meant to re-use these definitions inside the kernel as well
as export them to userspace (via uAPI).
The SPI mode definitions have usually been duplicated between between
'include/linux/spi/spi.h' and 'include/uapi/linux/spi/spidev.h', so
whenever adding a new entry, this would need to be put in both headers.
They've been moved from 'include/linux/spi/spi.h', since that seems a bit
more complete; the bits have descriptions and there is the SPI_MODE_X_MASK.
This change also does a conversion of these bitfields to _BITUL() macro.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201221152936.53873-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The set flag NFT_SET_EXPR provides a hint to the kernel that userspace
supports for multiple expressions per set element. In the same
direction, NFT_DYNSET_F_EXPR specifies that dynset expression defines
multiple expressions per set element.
This allows new userspace software with old kernels to bail out with
EOPNOTSUPP. This update is similar to ef516e8625 ("netfilter:
nf_tables: reintroduce the NFT_SET_CONCAT flag"). The NFT_SET_EXPR flag
needs to be set on when the NFTA_SET_EXPRESSIONS attribute is specified.
The NFT_SET_EXPR flag is not set on with NFTA_SET_EXPR to retain
backward compatibility in old userspace binaries.
Fixes: 48b0ae046e ("netfilter: nftables: netlink support for several set element expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Up until now validation errors were counted in the parsing field
of the cs_counters struct, so we added a new counter and increased
it when needed.
In addition, there were some locations where only one of the counters
was updated (ctx or aggregate) so add the second one to be updated
as well.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Forgot to add the comment for the opcode when it was added.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
vdpa sim refactoring
virtio mem Big Block Mode support
misc cleanus, fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl/gznEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpu/cIAJSVWVCs/5KVfeOg6NQ5WRK48g58eZoaIS6z
jr5iyCRfoQs3tQgcX0W02X3QwVwesnpepF9FChFwexlh+Te3tWXKaDj3eWBmlJVh
Hg8bMOOiOqY7qh47LsGbmb2pnJ3Tg8uwuTz+w/6VDc43CQa7ganwSl0owqye3ecm
IdGbIIXZQs55FCzM8hwOWWpjsp1C2lRtjefsOc5AbtFjzGk+7767YT+C73UgwcSi
peHbD8YFJTInQj6JCbF7uYYAWHrOFAOssWE3OwKtZJdTdJvE7bMgSZaYvUgHMvFR
gRycqxpLAg6vcuns4qjiYafrywvYwEvTkPIXmMG6IAgNYIPAxK0=
=SmPb
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...
* PSCI relay at EL2 when "protected KVM" is enabled
* New exception injection code
* Simplification of AArch32 system register handling
* Fix PMU accesses when no PMU is enabled
* Expose CSV3 on non-Meltdown hosts
* Cache hierarchy discovery fixes
* PV steal-time cleanups
* Allow function pointers at EL2
* Various host EL2 entry cleanups
* Simplification of the EL2 vector allocation
s390:
* memcg accouting for s390 specific parts of kvm and gmap
* selftest for diag318
* new kvm_stat for when async_pf falls back to sync
x86:
* Tracepoints for the new pagetable code from 5.10
* Catch VFIO and KVM irqfd events before userspace
* Reporting dirty pages to userspace with a ring buffer
* SEV-ES host support
* Nested VMX support for wait-for-SIPI activity state
* New feature flag (AVX512 FP16)
* New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
* Selftest improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/bdL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNgQQgAnTH6rhXa++Zd5F0EM2NwXwz3iEGb
lOq1DZSGjs6Eekjn8AnrWbmVQr+CBCuGU9MrxpSSzNDK/awryo3NwepOWAZw9eqk
BBCVwGBbJQx5YrdgkGC0pDq2sNzcpW/VVB3vFsmOxd9eHblnuKSIxEsCCXTtyqIt
XrLpQ1UhvI4yu102fDNhuFw2EfpzXm+K0Lc0x6idSkdM/p7SyeOxiv8hD4aMr6+G
bGUQuMl4edKZFOWFigzr8NovQAvDHZGrwfihu2cLRYKLhV97QuWVmafv/yYfXcz2
drr+wQCDNzDOXyANnssmviazrhOX0QmTAhbIXGGX/kTxYKcfPi83ZLoI3A==
=ISud
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
Merge still more updates from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (memcg and cleanups) and
epoll"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/Kconfig: fix spelling mistake "whats" -> "what's"
selftests/filesystems: expand epoll with epoll_pwait2
epoll: wire up syscall epoll_pwait2
epoll: add syscall epoll_pwait2
epoll: convert internal api to timespec64
epoll: eliminate unnecessary lock for zero timeout
epoll: replace gotos with a proper loop
epoll: pull all code between fetch_events and send_event into the loop
epoll: simplify and optimize busy loop logic
epoll: move eavail next to the list_empty_careful check
epoll: pull fatal signal checks into ep_send_events()
epoll: simplify signal handling
epoll: check for events when removing a timed out thread from the wait queue
mm/memcontrol:rewrite mem_cgroup_page_lruvec()
mm, kvm: account kvm_vcpu_mmap to kmemcg
mm/memcg: remove unused definitions
mm/memcg: warning on !memcg after readahead page charged
mm/memcg: bail early from swap accounting if memcg disabled
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The OASIS virtio spec (1.1) defines several IDs that aren't reflected
in the header yet. Fixing this by adding the missing IDs, even though
they're not yet used by the kernel yet.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201202111931.31953-2-info@metux.net
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixing the differing indentions to be consistent and properly aligned.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201202111931.31953-1-info@metux.net
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers
-----BEGIN PGP SIGNATURE-----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=BhU/
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Daniel Vetter:
"UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers"
* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
drm/qxl: don't allocate a dma_address array
drm/nouveau: fix multihop when move doesn't work.
drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
drm/i915: Fix mismatch between misplaced vma check and vma insert
drm/i915/perf: also include Gen11 in OATAILPTR workaround
Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
drm/amdgpu/disply: fix documentation warnings in display manager
drm/amdgpu: print mmhub client name for dimgrey_cavefish
drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
drm/amd/display: Add get_dig_frontend implementation for DCEx
drm/radeon: remove h from printk format specifier
drm/amdgpu: remove h from printk format specifier
drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
drm/amdgpu: fix regression in vbios reservation handling on headless
drm/amdgpu/SRIOV: Extend VF reset request wait period
drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
drm/amdgpu: print what method we are using for runtime pm
drm/amdgpu: simplify logic in atpx resume handling
drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
...
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips
now use the template struct gpio_irq_chip and pass that to the core
to be set up alongside the gpio_chip. We can finally get rid of
the old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME
(wall clock) timestamps. We have found solid use cases for
this, so we support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which
is pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device
tree client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for
register access.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl/b0r0ACgkQQRCzN7AZ
XXPRIQ/+P2VxypIIi8o5ZJLt/UN1CPGbh10WCl9yR95pM7Ekxocsa05MMAyPCbCA
SzDSo4wfrbVLd+C8oqGyLcyxR4A8LQDoc/MaBUC60SDr/BY2eu6bRCs9UttWUPUN
59H0r/dMAcSpIXwB9A7dKmF7Ps1Lz9naeZiGV8vw8hmuN4h3RtsWd10h8WDhByoq
RA099lNKs6pFpx61hvn+6mr8ewkm6RFh9q9/eg+zU0gVeaXpYLO6zHTnRS3dARIg
9qLZ54mRUAeybpUCi+CpleUM7qQI8wYHB7pJutAXByWVACie91P5youJv2JvMgs3
rvYyjRkHkM+EtpyXStv5zzfIi0JF746zWeeQmrR3bYy7prnIjjkUgIZb2Jmqu0p2
R0PAOmylociuSsEpARIqlGebqMKlmpsekuhJsf8x53le3nM4B2qC6fVEXFfYrp2L
sTfxeejmIFBBLLSSbfBFQOk3La9YBURGsidqgA2lQXL1ZSVhV6UrfblyLET6cOgs
y4ORYCV4SxeErUhePkA0GXjnu00nC9iD2Too6sTF+oRIirXX3R4SBbgoHKBEhMNe
/CWjYduwg7SkqwdeaBpZNU9jpFqq8Rny6nid13FMFORJWAszECzxcBIUaN55S/98
Z8QD0DJNo9nJZdtwT7OYE+x7/QcxgIHClU5MsrXS4yf3SlZHbAk=
=nrFU
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
-----BEGIN PGP SIGNATURE-----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=YiLC
-----END PGP SIGNATURE-----
Merge tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"The largest part are for support of the newer mount API which has been
needed for cifs/smb3 mounts for a long time due to the new API's
better handling of remount, and better error reporting. There are
three additional small cleanup patches for this being tested, that are
not included yet.
This series also includes addition of support for the SMB3 witness
protocol which can provide important notifications from the server to
client on server address or export or network changes. This can be
useful for example in order to be notified before the failure - when a
server's IP address changes (in the future it will allow us to support
server notifications of when a share is moved).
It also includes three patches for stable e.g. some that better handle
some confusing error messages during session establishment"
* tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits)
cifs: update internal module version number
cifs: Fix support for remount when not changing rsize/wsize
cifs: handle "guest" mount parameter
cifs: correct four aliased mount parms to allow use of previous names
cifs: Tracepoints and logs for tracing credit changes.
cifs: fix use after free in cifs_smb3_do_mount()
cifs: fix rsize/wsize to be negotiated values
cifs: Fix some error pointers handling detected by static checker
smb3: remind users that witness protocol is experimental
cifs: update super_operations to show_devname
cifs: fix uninitialized variable in smb3_fs_context_parse_param
cifs: update mnt_cifs_flags during reconfigure
cifs: move update of flags into a separate function
cifs: remove ctx argument from cifs_setup_cifs_sb
cifs: do not allow changing posix_paths during remount
cifs: uncomplicate printing the iocharset parameter
cifs: don't create a temp nls in cifs_setup_ipc
cifs: simplify handling of cifs_sb/ctx->local_nls
cifs: we do not allow changing username/password/unc/... during remount
cifs: add initial reconfigure support
...
Since we wake the GT up before executing a request, and go to sleep as
soon as it is retired, the GT wake time not only represents how long the
device is powered up, but also provides a summary, albeit an overestimate,
of the device runtime (i.e. the rc0 time to compare against rc6 time).
v2: s/busy/awake/
v3: software-gt-awake-time and I915_PMU_SOFTWARE_GT_AWAKE_TIME
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154456.13954-1-chris@chris-wilson.co.uk
Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nTjM
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug"
* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net/sched: sch_taprio: reset child qdiscs before freeing them
nfp: move indirect block cleanup to flower app stop callback
octeontx2-af: Fix undetected unmap PF error check
net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
qlcnic: Fix error code in probe
mptcp: fix pending data accounting
mptcp: push pending frames when subflow has free space
mptcp: properly annotate nested lock
mptcp: fix security context on server socket
net/mlx5: Fix compilation warning for 32-bit platform
mptcp: clear use_ack and use_map when dropping other suboptions
devlink: use _BITUL() macro instead of BIT() in the UAPI header
net: korina: fix return value
net/smc: fix access to parent of an ib device
ethtool: fix error paths in ethnl_set_channels()
nfc: s3fwrn5: Remove unused NCI prop commands
nfc: s3fwrn5: Remove the delay for NFC sleep
phy: fix kdoc warning
tipc: do sanity check payload of a netlink message
use __netdev_notify_peers in hyperv
...
New drivers/devices
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
- Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI keystone drivers for 5.11 included here due to dependency for TI
drivers
-----BEGIN PGP SIGNATURE-----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=uNBn
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The last dmaengine updates for this year :)
This contains couple of new drivers, new device support and updates to
bunch of drivers.
New drivers/devices:
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI drivers"
* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
dmaengine: ti: k3-udma: Initial support for K3 BCDMA
soc: ti: k3-ringacc: add AM64 DMA rings support.
dmaengine: ti: Add support for k3 event routers
dmaengine: ti: k3-psil: Add initial map for AM64
dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 BCDMA
dmaengine: dmatest: Use dmaengine_get_dma_device
dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
dmaengine: Add support for per channel coherency handling
dmaengine: of-dma: Add support for optional router configuration callback
dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
dmaengine: ti: k3-udma: Add support for second resource range from sysfw
dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCX9tWUAAKCRDh3BK/laaZ
PJ8CAP9RJLCxeG3388P9eLIWGXGrvtq3BIpxrZt57YsCQw5aXgEAmrL53WxDeLgG
sDV2J9IQ8gFKkkG1hjXyJj+Tw/yPmQE=
=zxR9
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Improve performance of virtio-fs in mixed read/write workloads
- Try to revalidate cache before returning EEXIST on exclusive create
- Add a couple of miscellaneous bug fixes as well as some code cleanups
* tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix bad inode
fuse: support SB_NOSEC flag to improve write performance
fuse: add a flag FUSE_OPEN_KILL_SUIDGID for open() request
fuse: don't send ATTR_MODE to kill suid/sgid for handle_killpriv_v2
fuse: setattr should set FATTR_KILL_SUIDGID
fuse: set FUSE_WRITE_KILL_SUIDGID in cached write path
fuse: rename FUSE_WRITE_KILL_PRIV to FUSE_WRITE_KILL_SUIDGID
fuse: introduce the notion of FUSE_HANDLE_KILLPRIV_V2
fuse: always revalidate if exclusive create
virtiofs: clean up error handling in virtio_fs_get_tree()
fuse: add fuse_sb_destroy() helper
fuse: simplify get_fuse_conn*()
fuse: get rid of fuse_mount refcount
virtiofs: simplify sb setup
virtiofs fix leak in setup
fuse: launder page should wait for page writeback
In this round, we've made more work into per-file compression support. For
example, F2FS_IOC_GET|SET_COMPRESS_OPTION provides a way to change the
algorithm or cluster size per file. F2FS_IOC_COMPRESS|DECOMPRESS_FILE provides
a way to compress and decompress the existing normal files manually along with
a new mount option, compress_mode=fs|user, which can control who compresses the
data. Chao also added a checksum feature with a mount option so that we are able
to detect any corrupted cluster. In addition, Daniel contributed casefolding
with encryption patch, which will be used for Android devices.
Enhancement:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fix:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well.
-----BEGIN PGP SIGNATURE-----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=KneU
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've made more work into per-file compression support.
For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to
change the algorithm or cluster size per file. F2FS_IOC_COMPRESS |
DECOMPRESS_FILE provides a way to compress and decompress the existing
normal files manually.
There is also a new mount option, compress_mode=fs|user, which can
control who compresses the data.
Chao also added a checksum feature with a mount option so that
we are able to detect any corrupted cluster.
In addition, Daniel contributed casefolding with encryption patch,
which will be used for Android devices.
Summary:
Enhancements:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fixes:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well"
* tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
f2fs: compress: fix compression chksum
f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
f2fs: fix race of pending_pages in decompression
f2fs: fix to account inline xattr correctly during recovery
f2fs: inline: fix wrong inline inode stat
f2fs: inline: correct comment in f2fs_recover_inline_data
f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
f2fs: convert to F2FS_*_INO macro
f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
f2fs: don't allow any writes on readonly mount
f2fs: avoid race condition for shrinker count
f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
f2fs: add compress_mode mount option
f2fs: Remove unnecessary unlikely()
f2fs: init dirty_secmap incorrectly
f2fs: remove buffer_head which has 32bits limit
f2fs: fix wrong block count instead of bytes
f2fs: use new conversion functions between blks and bytes
f2fs: rename logical_to_blk and blk_to_logical
f2fs: fix kbytes written stat for multi-device case
...
The BIT() macro is not available for the UAPI headers. Moreover, it can
be defined differently in user space headers. Thus, replace its usage
with the _BITUL() macro which is already used in other macro definitions
in <linux/devlink.h>.
Fixes: dc64cc7c63 ("devlink: Add devlink reload limit option")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20201215102531.16958-1-tklauser@distanz.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=W/GT
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
* tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio:
vfio/type1: Add vfio_group_iommu_domain()
vfio-ccw: Wire in the request callback
vfio-mdev: Wire in a request handler for mdev parent
vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU
vfio-pci: Use io_remap_pfn_range() for PCI IO memory
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
Pull HID updates from Jiri Kosina:
- AMD SFH (Sensor Fusion Hub) support (Sandeep Singh)
- increase of maximum HID report size to 16KB in order to support some
of the modern devices (Dean Camera)
- control interface support for hidraw (Dean Camera)
- Sony DS4 power and firmware reporting fixes (Roderick Colenbrander)
- support for ghlive PS3/WII U dongles (Pascal Giard)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: i2c-hid: add Vero K147 to descriptor override
HID: ite: Add support for Acer S1002 keyboard-dock
HID: sony: support for ghlive ps3/wii u dongles
HID: hidraw: Add additional hidraw input/output report ioctls.
HID: Increase HID maximum report size to 16KB
HID: elecom: drop stray comment
HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter
HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse
HID: elecom: rewrite report based on model specific parameters
HID: wacom: Constify attribute_groups
HID: input: Fix fall-through warnings for Clang
HID: usbhid: Fix fall-through warnings for Clang
HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse
HID: intel-ish-hid: Remove unnecessary assignment to variable rv
HID: sony: Workaround for DS4 dongle hotplug kernel crash.
HID: sony: Don't use fw_version/hw_version for sysfs cleanup.
HID: sony: Report more accurate DS4 power status.
SFH: fix error return check for -ERESTARTSYS
HID: SFH: Add documentation
HID: hid-input: occasionally report stylus battery even if not changed
...
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----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=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
-----BEGIN PGP SIGNATURE-----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=ly9V
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Fairly light set of changes this time around, and mostly some bits
that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a
few features. In particular:
- Cleanups around iovec import (David Laight, Pavel)
- Add timeout support for io_uring_enter(2), which enables us to
clean up liburing and avoid a timeout sqe submission in the
completion path.
The big win here is that it allows setups that split SQ and CQ
handling into separate threads to avoid locking, as the CQ side
will no longer submit when timeouts are needed when waiting for
events (Hao Xu)
- Add support for socket shutdown, and renameat/unlinkat.
- SQPOLL cleanups and improvements (Xiaoguang Wang)
- Allow SQPOLL setups for CAP_SYS_NICE, and enable regular
(non-fixed) files to be used.
- Cancelation improvements (Pavel)
- Fixed file reference improvements (Pavel)
- IOPOLL related race fixes (Pavel)
- Lots of other little fixes and cleanups (mostly Pavel)"
* tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits)
io_uring: fix io_cqring_events()'s noflush
io_uring: fix racy IOPOLL flush overflow
io_uring: fix racy IOPOLL completions
io_uring: always let io_iopoll_complete() complete polled io
io_uring: add timeout update
io_uring: restructure io_timeout_cancel()
io_uring: fix files cancellation
io_uring: use bottom half safe lock for fixed file data
io_uring: fix miscounting ios_left
io_uring: change submit file state invariant
io_uring: check kthread stopped flag when sq thread is unparked
io_uring: share fixed_file_refs b/w multiple rsrcs
io_uring: replace inflight_wait with tctx->wait
io_uring: don't take fs for recvmsg/sendmsg
io_uring: only wake up sq thread while current task is in io worker context
io_uring: don't acquire uring_lock twice
io_uring: initialize 'timeout' properly in io_sq_thread()
io_uring: refactor io_sq_thread() handling
io_uring: always batch cancel in *cancel_files()
io_uring: pass files into kill timeouts/poll
...
These are a couple of compiler warning fixes to make 'make W=2'
less noisy, as well as some fixes to code comments in asm-generic.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=c2xf
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"These are a couple of compiler warning fixes to make 'make W=2' less
noisy, as well as some fixes to code comments in asm-generic"
* tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Fix file comments for syscalls implemented in kernel/sys.c
ctype.h: remove duplicate isdigit() helper
qspinlock: use signed temporaries for cmpxchg
asm-generic: fix ffs -Wshadow warning
asm-generic: percpu: avoid Wshadow warning
asm-generic/sembuf: Update architecture related information in comment
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCX9dpfgAKCRCRxhvAZXjc
oo5kAP9PrqQAfEe9+CNlnOb4ZawcZaa3osUkr/ZkfoxI/dO2awEAgGCgWQ5PLtQF
gtfz6I5IT2sc3G4D+nGZxef6Q29J2Qc=
=fZNu
-----END PGP SIGNATURE-----
Merge tag 'close-range-openat2-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range/openat2 updates from Christian Brauner:
"This contains a fix for openat2() to make RESOLVE_BENEATH and
RESOLVE_IN_ROOT mutually exclusive. It doesn't make sense to specify
both at the same time. The openat2() selftests have been extended to
verify that these two flags can't be specified together.
This also adds the CLOSE_RANGE_CLOEXEC flag to close_range() which
allows to mark a range of file descriptors as close-on-exec without
actually closing them.
This is useful in general but the use-case that triggered the patch is
installing a seccomp profile in the calling task before exec. If the
seccomp profile wants to block the close_range() syscall it obviously
can't use it to close all fds before exec. If it calls close_range()
before installing the seccomp profile it needs to take care not to
close fds that it will still need before the exec meaning it would
have to call close_range() multiple times on different ranges and then
still fall back to closing fds one by one right before the exec.
CLOSE_RANGE_CLOEXEC allows to solve this problem relying on the exec
codepath to get rid of the unwanted fds. The close_range() tests have
been expanded to verify that CLOSE_RANGE_CLOEXEC works"
* tag 'close-range-openat2-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: core: add tests for CLOSE_RANGE_CLOEXEC
fs, close_range: add flag CLOSE_RANGE_CLOEXEC
selftests: openat2: add RESOLVE_ conflict test
openat2: reject RESOLVE_BENEATH|RESOLVE_IN_ROOT
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl/XdB4ACgkQxWXV+ddt
WDv41g//dOkrwjAVBfDUwRT/yKqojyEsZB1aNyHlPHFw8KEw5oIW7wxR4oqXi2ed
/i9KIJe4E9AfqAiexhLvA+Wyt/Sgwz+k4ys82PKhhRNQn7LE4tvhSBUu6JYJDU09
6I1jagya7ILa8akFXZTmVbXdliI4Ab+pcXWAmQYK/xPVDxYTSsBf4o4MilNBA9FS
lTwwBh5GTEtIkubr2yVd3pKfF4fT2g1hd+yglpHaOzpcrLMNN4hj4sUFlLbx/FlJ
MWo+914cSNKJoebbnqhK9djD9hggaaXnNooqfBOXUhZN0VN9rQoKb5tW+TREQmFm
shrmBSqN7CaqKfSOMZs7WOnTuTvmV/825PnLqDqcTUaLw+BgdyacpO9WflgfSs16
Cdvagr1SqbrSQ/3WYCpbqPLDNP3XuZ6+m5OWizf6fhyo8xdFcUHZgRC8qejDlycy
V/zP0c5OYOMi5vo6x/zhrD7Uft7xoFUVcSJCe8WPri082d9LbA2BqwCsullD60PQ
K/fsmlHs5Uxxy3MFgBPVDdWGgaa9rQ2vXequezbozBIIeeVL+Q9zkeyBFSYuFeE8
HToRE9B9BUEUh+p1JxPjOdFH/m+sKe1WMdmRLQthMzfOiNWW7pp/nL5rl4BUVmjm
58dQS73Cj/YNdBomRJXPPtgKIJPAWRrzU/JBcwAdMoKy57oh9NQ=
=5YAS
-----END PGP SIGNATURE-----
Merge tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"We have a mix of all kinds of changes, feature updates, core stuff,
performance improvements and lots of cleanups and preparatory changes.
User visible:
- export filesystem generation in sysfs
- new features for mount option 'rescue':
- what's currently supported is exported in sysfs
- 'ignorebadroots'/'ibadroots' - continue even if some essential
tree roots are not usable (extent, uuid, data reloc, device,
csum, free space)
- 'ignoredatacsums'/'idatacsums' - skip checksum verification on
data
- 'all' - now enables 'ignorebadroots' + 'ignoredatacsums' +
'nologreplay'
- export read mirror policy settings to sysfs, new policies will be
added in the future
- remove inode number cache feature (mount -o inode_cache), obsoleted
in 5.9
User visible fixes:
- async discard scheduling fixes on high loads
- update inode byte counter atomically so stat() does not report
wrong value in some cases
- free space tree fixes:
- correctly report status of v2 after remount
- clear v1 cache inodes when v2 is newly enabled after remount
Core:
- switch own tree lock implementation to standard rw semaphore:
- one-level lock nesting is not required anymore, the last use of
this was in free space that's now loaded asynchronously
- own implementation of adaptive spinning before taking mutex has
been part of rwsem
- performance seems to be better in general, much better (+tens
of percents) for some workloads
- lockdep does not complain
- finish direct IO conversion to iomap infrastructure, remove
temporary workaround for DSYNC after iomap API updates
- preparatory work to support data and metadata blocks smaller than
page:
- generalize code that assumes sectorsize == PAGE_SIZE, lots of
refactoring
- planned namely for 64K pages (eg. arm64, ppc64)
- scrub read-only support
- preparatory work for zoned allocation mode (SMR/ZBC/ZNS friendly):
- disable incompatible features
- round-robin superblock write
- free space cache (v1) is loaded asynchronously, remove tree path
recursion
- slightly improved time tacking for transaction kthread wake ups
Performance improvements (note that the numbers depend on load type or
other features and weren't run on the same machine):
- skip unnecessary work:
- do not start readahead for csum tree when scrubbing non-data
block groups
- do not start and wait for delalloc on snapshot roots on
transaction commit
- fix race when defragmenting leads to unnecessary IO
- dbench speedups (+throughput%/-max latency%):
- skip unnecessary searches for xattrs when logging an inode
(+10.8/-8.2)
- stop incrementing log batch when joining log transaction (1-2)
- unlock path before checking if extent is shared during nocow
writeback (+5.0/-20.5), on fio load +9.7% throughput/-9.8%
runtime
- several tree log improvements, eg. removing unnecessary
operations, fixing races that lead to additional work
(+12.7/-8.2)
- tree-checker error branches annotated with unlikely() (+3%
throughput)
Other:
- cleanups
- lockdep fixes
- more btrfs_inode conversions
- error variable cleanups"
* tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
btrfs: scrub: allow scrub to work with subpage sectorsize
btrfs: scrub: support subpage data scrub
btrfs: scrub: support subpage tree block scrub
btrfs: scrub: always allocate one full page for one sector for RAID56
btrfs: scrub: reduce width of extent_len/stripe_len from 64 to 32 bits
btrfs: refactor btrfs_lookup_bio_sums to handle out-of-order bvecs
btrfs: remove btrfs_find_ordered_sum call from btrfs_lookup_bio_sums
btrfs: handle sectorsize < PAGE_SIZE case for extent buffer accessors
btrfs: update num_extent_pages to support subpage sized extent buffer
btrfs: don't allow tree block to cross page boundary for subpage support
btrfs: calculate inline extent buffer page size based on page size
btrfs: factor out btree page submission code to a helper
btrfs: make btrfs_verify_data_csum follow sector size
btrfs: pass bio_offset to check_data_csum() directly
btrfs: rename bio_offset of extent_submit_bio_start_t to dio_file_offset
btrfs: fix lockdep warning when creating free space tree
btrfs: skip space_cache v1 setup when not using it
btrfs: remove free space items when disabling space cache v1
btrfs: warn when remount will not change the free space tree
btrfs: use superblock state to print space_cache mount option
...
This extracts the "nameserver" previoiusly used only by the virtio rpmsg
transport to work ontop of any rpmsg implementation and clarifies the
endianness of the data types used in rpmsg.
-----BEGIN PGP SIGNATURE-----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=yGKj
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This extracts the 'nameserver' previously used only by the virtio
rpmsg transport to work ontop of any rpmsg implementation and
clarifies the endianness of the data types used in rpmsg"
* tag 'rpmsg-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: Turn name service into a stand alone driver
rpmsg: Make rpmsg_{register|unregister}_device() public
rpmsg: virtio: Add rpmsg channel device ops
rpmsg: core: Add channel creation internal API
rpmsg: virtio: Rename rpmsg_create_channel
rpmsg: Move structure rpmsg_ns_msg to header file
rpmsg: virtio: Move from virtio to rpmsg byte conversion
rpmsg: Introduce __rpmsg{16|32|64} types
-----BEGIN PGP SIGNATURE-----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=xRTv
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Decode PCIe 64 GT/s link speed (Gustavo Pimentel)
- Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit)
- Reduce pci_set_cacheline_size() message to debug level (Heiner
Kallweit)
- Fix pci_slot_release() NULL pointer dereference (Jubin Zhong)
- Unify ECAM constants in native PCI Express drivers (Krzysztof
Wilczyński)
- Return u8 from pci_find_capability() and similar (Puranjay Mohan)
- Return u16 from pci_find_ext_capability() and similar (Bjorn
Helgaas)
- Fix ACPI companion lookup for device 0 on the root bus (Rafael J.
Wysocki)
Resource management:
- Keep both device and resource name for config space remaps
(Alexander Lobakin)
- Bounds-check command-line resource alignment requests (Bjorn
Helgaas)
- Fix overflow in command-line resource alignment requests (Colin Ian
King)
Driver binding:
- Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan)
Power management:
- Save/restore Precision Time Measurement Capability for
suspend/resume (David E. Box)
- Disable PTM during suspend to save power (David E. Box)
- Add sysfs attribute for device power state (Maximilian Luz)
- Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg)
- Do not generate wakeup event when runtime resuming device (Mika
Westerberg)
- Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar)
Virtualization:
- Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher)
- Add function 1 DMA alias quirk for Marvell 9215 SATA controller
(Bjorn Helgaas)
MSI:
- Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko)
- Improve warnings for 32-bit-limited MSI support (Vidya Sagar)
Error handling:
- Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V
Kelley)
- Rename reset_link() to reset_subordinates() (Sean V Kelley)
- Write AER Capability only when we control it (Sean V Kelley)
- Clear AER status only when we control AER (Sean V Kelley)
- Bind RCEC devices to the Root Port driver (Qiuxu Zhuo)
- Recover from RCiEP AER errors (Qiuxu Zhuo)
- Recover from RCEC AER errors (Sean V Kelley)
- Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley)
- Add RCEC AER error injection support (Qiuxu Zhuo)
Broadcom iProc PCIe controller driver:
- Fix out-of-bound array accesses (Bharat Gooty)
- Invalidate correct PAXB inbound windows (Roman Bacik)
- Enhance PCIe Link information display (Srinath Mannam)
Cadence PCIe controller driver:
- Make "cdns,max-outbound-regions" property optional (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Offset client MSI-X vectors (Jon Derrick)
- Update type of __iomem pointers (Krzysztof Wilczyński)
NVIDIA Tegra PCIe controller driver:
- Move "dbi" accesses to post common DWC initialization (Vidya Sagar)
- Read "dbi" base address to program in application logic (Vidya
Sagar)
- Fix ASPM-L1SS advertisement disable code (Vidya Sagar)
- Set DesignWare IP version (Vidya Sagar)
- Continue unconfig sequence even if parts fail (Vidya Sagar)
- Check return value of tegra_pcie_init_controller() (Vidya Sagar)
- Disable LTSSM during L2 entry (Vidya Sagar)
Qualcomm PCIe controller driver:
- Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam)
- Add SM8250 SoC support (Manivannan Sadhasivam)
- Add support for configuring BDF to SID mapping for SM8250
(Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- rcar: Drop unused members from struct rcar_pcie_host (Lad
Prabhakar)
- PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar)
- PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro
Shimoda)
- PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda)
Samsung Exynos PCIe controller driver:
- Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung)
- Rework driver to support Exynos5433 variant (Jaehoon Chung)
- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie-phy binding (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Support multiple ATU memory regions (Rob Herring)
- Move intel-gw ATU offset out of driver match data (Rob Herring)
- Move "dbi", "dbi2", and "addr_space" resource setup into common
code (Rob Herring)
- Remove intel-gw unneeded function wrappers (Rob Herring)
- Ensure all outbound ATU windows are reset (Rob Herring)
- Use the common MSI irq_chip in dra7xx (Rob Herring)
- Drop the .set_num_vectors() host op (Rob Herring)
- Move MSI interrupt setup into DWC common code (Rob Herring)
- Rework MSI initialization (Rob Herring)
- Move link handling into common code (Rob Herring)
- Move dw_pcie_msi_init() into core (Rob Herring)
- Move dw_pcie_setup_rc() to DWC common code (Rob Herring)
- Remove unnecessary wrappers around dw_pcie_host_init() (Rob
Herring)
- Drop keystone duplicated 'num-viewport'" (Rob Herring)
- Move inbound and outbound windows to common struct (Rob Herring)
- Detect number of iATU windows (Rob Herring)
- Warn if non-prefetchable memory aperture size is > 32-bit (Vidya
Sagar)
- Add support to program ATU for >4GB memory (Vidya Sagar)
- Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar)
TI J721E PCIe driver:
- Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I)
- Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham
I)
- Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I)
- Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
(Kishon Vijay Abraham I)
TI Keystone PCIe controller driver:
- Enable compile-testing on !ARM (Alex Dewar)"
* tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
PCI/ACPI: Fix companion lookup for device 0 on the root bus
PCI: Keep both device and resource name for config space remaps
PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c
PCI: vmd: Update type of the __iomem pointers
PCI: iproc: Convert to use the new ECAM constants
PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser
PCI: Unify ECAM constants in native PCI Express drivers
PCI: Disable PTM during suspend to save power
PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
PCI: Mark AMD Raven iGPU ATS as broken in some platforms
PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
PCI: Reduce pci_set_cacheline_size() message to debug level
PCI: Remove unused HAVE_PCI_SET_MWI
PCI: qcom: Add SM8250 SoC support
...
Highlights:
- New driver for changing BIOS settings from within Linux on Dell devices,
this introduces a new generic sysfs API for this. Lenovo is working on
also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid drivers
- Preparation work for improving support for Microsoft Surface hardware
- Various fixes / improvements / quirks for the panasonic-laptop and others
The following is an automated git shortlog grouped by driver:
ISST:
- Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
- Change PCI device macros
- Allow configurable offset range
- Check for unaligned mmio address
Intel PMT Crashlog capability driver:
- Intel PMT Crashlog capability driver
Intel PMT Telemetry capability driver:
- Intel PMT Telemetry capability driver
Intel PMT class driver:
- Intel PMT class driver
Introduce support for Systems Management Driver over WMI for Dell Systems:
- Introduce support for Systems Management Driver over WMI for Dell Systems
MAINTAINERS:
- new panasonic-laptop maintainer
- rectify DELL WMI SYSMAN DRIVERS section
Merge tag 'ib-mfd-x86-v5.11' into review-hans:
- Merge tag 'ib-mfd-x86-v5.11' into review-hans
PCI:
- Add defines for Designated Vendor-Specific Extended Capability
Revert "platform/x86:
- wmi: Destroy on cleanup rather than unregister"
acer-wireless:
- send an EV_SYN/SYN_REPORT between state changes
acer-wmi:
- Add ACER_CAP_KBD_DOCK quirk for the Aspire Switch 10E SW3-016
- add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
- Add support for SW_TABLET_MODE on Switch devices
- Add ACER_CAP_SET_FUNCTION_MODE capability flag
- Add new force_caps module parameter
- Cleanup accelerometer device handling
- Cleanup ACER_CAP_FOO defines
- Drop no-op set_quirks call from find_quirks
amd-pmc:
- Add AMD platform support for S2Idle
asus-wmi:
- Add userspace notification for performance mode change
- Add support for SW_TABLET_MODE on UX360
dell-smbios-base:
- Fix error return code in dell_smbios_init
dell-wmi-sysman:
- work around for BIOS bug
- fix init_bios_attributes() error handling
docs:
- ABI: sysfs-class-firmware-attributes: solve some warnings
i2c-multi-instantiate:
- Use device_get_match_data() to get driver data
- Simplify with dev_err_probe()
- Drop redundant ACPI_PTR()
intel-hid:
- add Rocket Lake ACPI device ID
- Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
- Add alternative method to enable switches
- Add support for SW_TABLET_MODE
- fix _DSM function index handling
intel-vbtn:
- Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
- Allow switch events on Acer Switch Alpha 12
- Support for tablet mode on HP Pavilion 13 x360 PC
intel_pmc_core:
- Assign boolean values to a bool variable
mfd:
- Intel Platform Monitoring Technology support
mlx-platform:
- Fix item counter assignment for MSN2700/ComEx system
- Fix item counter assignment for MSN2700, MSN24xx systems
- remove an unused variable
- Remove PSU EEPROM from MSN274x platform configuration
- Remove PSU EEPROM from default platform configuration
panasonic-laptop:
- Add sysfs attributes for firmware brightness registers
- Add support for battery charging threshold (eco mode)
- Resolve hotkey double trigger bug
- Add write support to mute
- Fix sticky key init bug
- Fix naming of platform files for consistency with other modules
- Split MODULE_AUTHOR() by one author per macro call
- Replace ACPI prints with pr_*() macros
- Add support for optical driver power in Y and W series
platform:
- Add Surface platform directory
platform/mellanox:
- mlxbf-pmc: Add Mellanox BlueField PMC driver
platform/surface:
- gpe: Add support for 15" Intel version of Surface Laptop 3
- Add Driver to set up lid GPEs on MS Surface device
- Move Surface Pro 3 Button driver to platform/surface
- Move Surface 3 Power OpRegion driver to platform/surface
- Move Surface 3 Button driver to platform/surface
- Move Surface 3 WMI driver to platform/surface
platform/x86/dell-wmi-sysman:
- Make some symbols static
- Make wmi_sysman_kobj_sysfs_ops static
pmt:
- Fix a potential Oops on error in probe
remove unneeded break:
- remove unneeded break
thinkpad_acpi:
- remove trailing semicolon in macro definition
- Whitelist P15 firmware for dual fan control
- Add palm sensor support
- Send tablet mode switch at wakeup time
- Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
- Do not report SW_TABLET_MODE on Yoga 11e
- add P1 gen3 second fan support
tools/power/x86/intel-speed-select:
- Update version for v5.11
- Account for missing sysfs for die_id
- Read TRL from mailbox
toshiba_acpi:
- Fix the wrong variable assignment
touchscreen_dmi:
- Add info for the Irbis TW118 tablet
- Add info for the Predia Basic tablet
x86/platform:
- classmate-laptop: add WiFi media button
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAl/XTkEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9z5EAf7BzqZDyFBpsDd8+o0FsjCq1DEzw0R
lZdhZt65wSMqe0sndgfStPQG1yet8JgABgq8aCkBQLhj55hjiOUYHe5iXmylSRQn
iWhu2xI+qYb9rhPW3lYilGcWAIfC5jrEZHFLtpXKx/p5iwCJQRvI6sV8HwcwJjnQ
p3eyxIUEQieAtO90scqsOWZTKtT/no9UMTLbZwrO3Spv05WGopIMtkHPWYTd96pa
6SRBdhZj3mrHHc7mRe0u4Wx2dzeUwiPLfubt/kmRPoo1HWTGE2Ck4KPqN/nSY3R2
z882CMZjWpbwoc3OP2fK26uIHjTh45+yVH8DVZbaQW9BWIOdE87iADzuWA==
=Df8H
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New driver for changing BIOS settings from within Linux on Dell
devices. This introduces a new generic sysfs API for this. Lenovo
is working on also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid
drivers
- Preparation work for improving support for Microsoft Surface
hardware
- Various fixes / improvements / quirks for the panasonic-laptop and
others"
* tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits)
platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
platform/x86: intel-hid: add Rocket Lake ACPI device ID
x86/platform: classmate-laptop: add WiFi media button
platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
tools/power/x86/intel-speed-select: Update version for v5.11
tools/power/x86/intel-speed-select: Account for missing sysfs for die_id
tools/power/x86/intel-speed-select: Read TRL from mailbox
platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
platform/x86: intel-hid: Add alternative method to enable switches
platform/x86: intel-hid: Add support for SW_TABLET_MODE
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
platform/x86: ISST: Change PCI device macros
platform/x86: ISST: Allow configurable offset range
platform/x86: ISST: Check for unaligned mmio address
acer-wireless: send an EV_SYN/SYN_REPORT between state changes
platform/x86: dell-wmi-sysman: work around for BIOS bug
platform/x86: mlx-platform: remove an unused variable
platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition
platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init
...
Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be more
and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iDZA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRMACgqxKS2CUcY8tPnR5weHEsbz6O+KAAn3BtEFnK
7V9EnSuZe4L1jNOHOB5V
=xzHh
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be
more and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates"
* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
extcon: max77693: Fix modalias string
extcon: fsa9480: Support TI TSU6111 variant
extcon: fsa9480: Rewrite bindings in YAML and extend
dt-bindings: extcon: add binding for TUSB320
extcon: Add driver for TI TUSB320
slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
siox: Make remove callback return void
siox: Use bus_type functions for probe, remove and shutdown
spmi: Add driver shutdown support
spmi: fix some coding style issues at the spmi core
spmi: get rid of a warning when built with W=1
uio: uio_hv_generic: use devm_kzalloc() for private data alloc
uio: uio_fsl_elbc_gpcm: use device-managed allocators
uio: uio_aec: use devm_kzalloc() for uio_info object
uio: uio_cif: use devm_kzalloc() for uio_info object
uio: uio_netx: use devm_kzalloc() for or uio_info object
uio: uio_mf624: use devm_kzalloc() for uio_info object
uio: uio_sercos3: use device-managed functions for simple allocs
uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
uio: uio_dmem_genirq: convert simple allocations to device-managed
...
Here is the "large" set of tty and serial patches for 5.11-rc1.
Nothing major at all, some cleanups and some driver removals, always a
nice sign:
- build warning cleanups
- vt locking and logic unwinding and cleanups
- tiny serial driver fixes and updates
- removal of the synclink serial driver as it's no longer needed
- removal of dead termiox code
All of this has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iGrw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk6ZwCgurjtlXOdtrjM6kcvYfKZcILS7jQAoK1B1rH9
O6fVeZl8qRDWL4p06y2s
=0Uho
-----END PGP SIGNATURE-----
Merge tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "large" set of tty and serial patches for 5.11-rc1.
Nothing major at all, some cleanups and some driver removals, always a
nice sign:
- build warning cleanups
- vt locking and logic unwinding and cleanups
- tiny serial driver fixes and updates
- removal of the synclink serial driver as it's no longer needed
- removal of dead termiox code
All of this has been in linux-next for a while with no reported issues"
* tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits)
serial: 8250_pci: Drop bogus __refdata annotation
tty: serial: meson: enable console as module
serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
serial: imx: Move imx_uart_probe_dt() content into probe()
serial: imx: Remove unneeded of_device_get_match_data() NULL check
tty: Fix whitespace inconsistencies in vt_io_ioctl
serial_core: Check for port state when tty is in error state
dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC
tty: use const parameters in port-flag accessors
tty: use assign_bit() in port-flag accessors
earlycon: drop semicolon from earlycon macro
tty: Remove dead termiox code
tty/serial/imx: Enable TXEN bit in imx_poll_init().
tty : serial: jsm: Fixed file by adding spacing
tty: serial: uartlite: Support probe deferral
earlycon: simplify earlycon-table implementation
tty: serial: bcm63xx: lower driver dependencies
serial: mxs-auart: Remove unneeded platform_device_id
serial: 8250-mtk: Fix reference leak in mtk8250_probe
serial: imx: Remove unused .id_table support
...
Lots of changes (slightly more code increase than usual) at this
time, while most of code changes are ASoC driver-specific.
Here goes some highlight:
Core:
* The new auxiliary bus implementation for Intel DSP, which will
be used by other drivers as well
* Lots of ASoC core cleanups and refactoring
* UBSAN and KCSAN fixes in rawmidi, sequencer and a few others
* Compress-offload API enhancement for the pause during draining
HD- and USB-audio:
* Enhancements of the USB-audio implicit feedback support,
including better full-duplex operations
* Continued CA0132 improvements and fixes
* A few new quirk entries, HDMI audio fixes
ASoC:
* Support for boot time selection of Intel DSP firmware, which
should help distros/users testing new stuff more easily;
the kconfig was moved to boot time option, too
* Some basic DPCM support in audio graph card
* Removal of old pre-DT Freescale drivers
* Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
RT715, Qualcomm SM8250 and simple GPIO based muxes
-----BEGIN PGP SIGNATURE-----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=j9El
-----END PGP SIGNATURE-----
Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes (slightly more code increase than usual) at this time,
while most of code changes are ASoC driver-specific.
Here are some highlights:
Core:
- The new auxiliary bus implementation for Intel DSP, which will be
used by other drivers as well
- Lots of ASoC core cleanups and refactoring
- UBSAN and KCSAN fixes in rawmidi, sequencer and a few others
- Compress-offload API enhancement for the pause during draining
HD- and USB-audio:
- Enhancements of the USB-audio implicit feedback support, including
better full-duplex operations
- Continued CA0132 improvements and fixes
- A few new quirk entries, HDMI audio fixes
ASoC:
- Support for boot time selection of Intel DSP firmware, which should
help distros/users testing new stuff more easily; the kconfig was
moved to boot time option, too
- Some basic DPCM support in audio graph card
- Removal of old pre-DT Freescale drivers
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
RT715, Qualcomm SM8250 and simple GPIO based muxes"
* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
ALSA: pcm: oss: Fix potential out-of-bounds shift
ALSA: usb-audio: Fix potential out-of-bounds shift
ALSA: hda/ca0132 - Add ZxR surround DAC setup.
ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
ALSA: hda/hdmi: packet buffer index must be set before reading value
ASoC: SOF: imx: update kernel-doc description
ASoC: mediatek: mt8183: delete some unreachable code
ASoC: mediatek: mt8183: add PM ops to machine drivers
ASoC: topology: Fix wrong size check
ASoC: topology: Add missing size check
ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
ASoC: SOF: modify the SOF_DBG flags
ASoC: SOF: Intel: hda: remove duplicated status dump
ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
ASoC: rt1015p: move SDB control from trigger to DAPM
ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
ALSA: usb-audio: Fix control 'access overflow' errors from chmap
ALSA: hda/hdmi: always print pin NIDs as hexadecimal
ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
...
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
- Stop writing AER Capability when we don't own it (Sean V Kelley)
- Bind RCEC devices to the Port driver (Qiuxu Zhuo)
- Cache the RCEC RA Capability offset (Sean V Kelley)
- Add pci_walk_bridge() (Sean V Kelley)
- Clear AER status only when we control AER (Sean V Kelley)
- Recover from RCEC AER errors (Sean V Kelley)
- Add pcie_link_rcec() to associate RCiEPs with RCECs (Sean V Kelley)
- Recover from RCiEP AER errors (Sean V Kelley)
- Add pcie_walk_rcec() for RCEC AER handling (Sean V Kelley)
- Add pcie_walk_rcec() for RCEC PME handling (Sean V Kelley)
- Add RCEC AER error injection support (Qiuxu Zhuo)
* pci/err:
PCI/AER: Add RCEC AER error injection support
PCI/PME: Add pcie_walk_rcec() to RCEC PME handling
PCI/AER: Add pcie_walk_rcec() to RCEC AER handling
PCI/ERR: Recover from RCiEP AER errors
PCI/ERR: Add pcie_link_rcec() to associate RCiEPs
PCI/ERR: Recover from RCEC AER errors
PCI/ERR: Clear AER status only when we control AER
PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery()
PCI/ERR: Avoid negated conditional for clarity
PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()
PCI/ERR: Simplify by computing pci_pcie_type() once
PCI/ERR: Simplify by using pci_upstream_bridge()
PCI/ERR: Rename reset_link() to reset_subordinates()
PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities()
PCI/ERR: Bind RCEC devices to the Root Port driver
PCI/AER: Write AER Capability only when we control it
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
Patch series "Control over userfaultfd kernel-fault handling", v6.
This patch series is split from [1]. The other series enables SELinux
support for userfaultfd file descriptors so that its creation and movement
can be controlled.
It has been demonstrated on various occasions that suspending kernel code
execution for an arbitrary amount of time at any access to userspace
memory (copy_from_user()/copy_to_user()/...) can be exploited to change
the intended behavior of the kernel. For instance, handling page faults
in kernel-mode using userfaultfd has been exploited in [2, 3]. Likewise,
FUSE, which is similar to userfaultfd in this respect, has been exploited
in [4, 5] for similar outcome.
This small patch series adds a new flag to userfaultfd(2) that allows
callers to give up the ability to handle kernel-mode faults with the
resulting UFFD file object. It then adds a 'user-mode only' option to the
unprivileged_userfaultfd sysctl knob to require unprivileged callers to
use this new flag.
The purpose of this new interface is to decrease the chance of an
unprivileged userfaultfd user taking advantage of userfaultfd to enhance
security vulnerabilities by lengthening the race window in kernel code.
[1] https://lore.kernel.org/lkml/20200211225547.235083-1-dancol@google.com/
[2] https://duasynt.com/blog/linux-kernel-heap-spray
[3] https://duasynt.com/blog/cve-2016-6187-heap-off-by-one-exploit
[4] https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html
[5] https://bugs.chromium.org/p/project-zero/issues/detail?id=808
This patch (of 2):
userfaultfd handles page faults from both user and kernel code. Add a new
UFFD_USER_MODE_ONLY flag for userfaultfd(2) that makes the resulting
userfaultfd object refuse to handle faults from kernel mode, treating
these faults as if SIGBUS were always raised, causing the kernel code to
fail with EFAULT.
A future patch adds a knob allowing administrators to give some processes
the ability to create userfaultfd file objects only if they pass
UFFD_USER_MODE_ONLY, reducing the likelihood that these processes will
exploit userfaultfd's ability to delay kernel page faults to open timing
windows for future exploits.
Link: https://lkml.kernel.org/r/20201120030411.2690816-1-lokeshgidra@google.com
Link: https://lkml.kernel.org/r/20201120030411.2690816-2-lokeshgidra@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <calin@google.com>
Cc: Daniel Colascione <dancol@dancol.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nitin Gupta <nigupta@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shaohua Li <shli@fb.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.
The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.
This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:
In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
from ../include/tst_netlink.h:14,
from tst_crypto.c:13:
x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/tst_safe_macros.h:15,
from ../include/tst_test.h:93,
from tst_crypto.c:11:
x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
-----BEGIN PGP SIGNATURE-----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=hf4L
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.11
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Add VMADDR_FLAG_TO_HOST vsock flag that is used to setup a vsock
connection where all the packets are forwarded to the host.
Then, using this type of vsock channel, vsock communication between
sibling VMs can be built on top of it.
Changelog
v3 -> v4
* Update the "VMADDR_FLAG_TO_HOST" value, as the size of the field has
been updated to 1 byte.
v2 -> v3
* Update comments to mention when the flag is set in the connect and
listen paths.
v1 -> v2
* New patch in v2, it was split from the first patch in the series.
* Remove the default value for the vsock flags field.
* Update the naming for the vsock flag to "VMADDR_FLAG_TO_HOST".
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock enables communication between virtual machines and the host they
are running on. With the multi transport support (guest->host and
host->guest), nested VMs can also use vsock channels for communication.
In addition to this, by default, all the vsock packets are forwarded to
the host, if no host->guest transport is loaded. This behavior can be
implicitly used for enabling vsock communication between sibling VMs.
Add a flags field in the vsock address data structure that can be used
to explicitly mark the vsock connection as being targeted for a certain
type of communication. This way, can distinguish between different use
cases such as nested VMs and sibling VMs.
This field can be set when initializing the vsock address variable used
for the connect() call.
Changelog
v3 -> v4
* Update the size of "svm_flags" field to be 1 byte instead of 2 bytes.
v2 -> v3
* Add "svm_flags" as a new field, not reusing "svm_reserved1".
v1 -> v2
* Update the field name to "svm_flags".
* Split the current patch in 2 patches.
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
Core:
- Better handling of page table leaves on archictectures which have
architectures have non-pagetable aligned huge/large pages. For such
architectures a leaf can actually be part of a larger entry.
- Prevent a deadlock vs. exec_update_mutex
Architectures:
- The related updates for page size calculation of leaf entries
- The usual churn to support new CPUs
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XvgATHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUrdEACatdr93wv75vnm5tCZM4EsFvB2PzVJ
ck4K4+hHiMVV4802qf+kW5plF+rckAU4TAai/L7wkTntKHvjD/0/o1epoIStb+dS
SCpVkQMCLT/8xT242iHPOfgsQpVpJnIiBwVRjn8HXu82nXdgMJhKnBjTe634UfxW
o2OCFiyJzpRi5l86gVp67ueqgvl34NPI2JaSLc0g80QfZ8akzdePPpED35CzYjZh
41k+7ssvt6qch3vMUySHAhkX4gQl0nc80YAaF/XZbCfvdyY7D03PtfBjfvphTSK0
l54z9aWh0ciK9P1aPfvkHDXBJUR2VtUAx2GiURK+XU3jNk3KMrz9CcBl1D/exIAg
07IsiYVoB38YAUOZoR9K8p+p+5EuwYRRUMAgfQfBALCuaLQV477Cne82b2KmNCus
1izUQvcDDf0s74OyYTHWFXRGla95COJvNLzkrZ1oU3mX4HgdKdOAUbf/2XTLWeKO
3HOIS+jsg5cp82tRe4X5r51h73pONYlo9lLo/CjQXz25vMcXKtE/MZGq2gkRff4p
N4k88eQ5LOsRqUaU46GcHozXRCfcpW7SPI9AaN5I/fKGIZvHP7uMdMb+g5DV8yHI
dNZ8u5uLPHwdg80C3fJ3Pnp7VsVNHliPXMwv0vib7BCp7aUVZWeFnOntw3PdYFRk
XKEbfl36IuAadg==
=rZ99
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Core:
- Better handling of page table leaves on archictectures which have
architectures have non-pagetable aligned huge/large pages. For such
architectures a leaf can actually be part of a larger entry.
- Prevent a deadlock vs exec_update_mutex
Architectures:
- The related updates for page size calculation of leaf entries
- The usual churn to support new CPUs
- Small fixes and improvements all over the place"
* tag 'perf-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
perf/x86/intel: Add Tremont Topdown support
uprobes/x86: Fix fall-through warnings for Clang
perf/x86: Fix fall-through warnings for Clang
kprobes/x86: Fix fall-through warnings for Clang
perf/x86/intel/lbr: Fix the return type of get_lbr_cycles()
perf/x86/intel: Fix rtm_abort_event encoding on Ice Lake
x86/kprobes: Restore BTF if the single-stepping is cancelled
perf: Break deadlock involving exec_update_mutex
sparc64/mm: Implement pXX_leaf_size() support
powerpc/8xx: Implement pXX_leaf_size() support
arm64/mm: Implement pXX_leaf_size() support
perf/core: Fix arch_perf_get_page_size()
mm: Introduce pXX_leaf_size()
mm/gup: Provide gup_get_pte() more generic
perf/x86/intel: Add event constraint for CYCLE_ACTIVITY.STALLS_MEM_ANY
perf/x86/intel/uncore: Add Rocket Lake support
perf/x86/msr: Add Rocket Lake CPU support
perf/x86/cstate: Add Rocket Lake CPU support
perf/x86/intel: Add Rocket Lake CPU support
perf,mm: Handle non-page-table-aligned hugetlbfs
...
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for non-x86
specific TIF flags which are solely relevant for syscall related work
and have been moved into their own storage space. The x86 specific part
had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is going to
come seperate via Jens.
- The selective syscall redirection facility which provides a clean and
efficient way to support the non-Linux syscalls of WINE by catching them
at syscall entry and redirecting them to the user space emulation. This
can be utilized for other purposes as well and has been designed
carefully to avoid overhead for the regular fastpath. This includes the
core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the users
of the generic entry code which guarantee the proper ordering and
protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall restart
mechanism.
-----BEGIN PGP SIGNATURE-----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=hsjV
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCX9daOgAKCRCRxhvAZXjc
ohPkAQChXUB2BAjtIzXlCkZoDBbzHHblm5DZ37oy/4xYFmAcEwEA5sw6dQqyGHnF
GEP9def51HvXLpBV2BzNUGggo1SoGgQ=
=w/cO
-----END PGP SIGNATURE-----
Merge tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
"This contains several fixes which felt worth being combined into a
single branch:
- Use put_nsproxy() instead of open-coding it switch_task_namespaces()
- Kirill's work to unify lifecycle management for all namespaces. The
lifetime counters are used identically for all namespaces types.
Namespaces may of course have additional unrelated counters and
these are not altered. This work allows us to unify the type of the
counters and reduces maintenance cost by moving the counter in one
place and indicating that basic lifetime management is identical
for all namespaces.
- Peilin's fix adding three byte padding to Dmitry's
PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak.
- Two smal patches to convert from the /* fall through */ comment
annotation to the fallthrough keyword annotation which I had taken
into my branch and into -next before df561f6688 ("treewide: Use
fallthrough pseudo-keyword") made it upstream which fixed this
tree-wide.
Since I didn't want to invalidate all testing for other commits I
didn't rebase and kept them"
* tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
nsproxy: use put_nsproxy() in switch_task_namespaces()
sys: Convert to the new fallthrough notation
signal: Convert to the new fallthrough notation
time: Use generic ns_common::count
cgroup: Use generic ns_common::count
mnt: Use generic ns_common::count
user: Use generic ns_common::count
pid: Use generic ns_common::count
ipc: Use generic ns_common::count
uts: Use generic ns_common::count
net: Use generic ns_common::count
ns: Add a common refcount into ns_common
ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags (like
SPARC ADI, subject to wiring up the arch code). The user will have to
opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if
available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans the
Device Tree dma-ranges and the ACPI IORT information before deciding
on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override (UAO)
ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
-----BEGIN PGP SIGNATURE-----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=zXFk
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap.
2) Use atomic_inc_return() instead of atomic_add_return() in IPVS,
from Yejune Deng.
3) Simplify check for overquota in xt_nfacct, from Kaixu Xia.
4) Move nfnl_acct_list away from struct net, from Miao Wang.
5) Pass actual sk in reject actions, from Jan Engelhardt.
6) Add timeout and protoinfo to ctnetlink destroy events,
from Florian Westphal.
7) Four patches to generalize set infrastructure to support
for multiple expressions per set element.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nftables: netlink support for several set element expressions
netfilter: nftables: generalize set extension to support for several expressions
netfilter: nftables: move nft_expr before nft_set
netfilter: nftables: generalize set expressions support
netfilter: ctnetlink: add timeout and protoinfo to destroy events
netfilter: use actual socket sk for REJECT action
netfilter: nfnl_acct: remove data from struct net
netfilter: Remove unnecessary conversion to bool
ipvs: replace atomic_add_return()
netfilter: nft_reject_bridge: fix build errors due to code movement
====================
Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-12-14
1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.
2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.
3) Support for finding BTF based kernel attach targets through libbpf's
bpf_program__set_attach_target() API, from Andrii Nakryiko.
4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.
5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.
6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.
7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.
8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.
9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
KP Singh, Jiri Olsa and various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
bpf: Permits pointers on stack for helper calls
libbpf: Expose libbpf ring_buffer epoll_fd
selftests/bpf: Add set_attach_target() API selftest for module target
libbpf: Support modules in bpf_program__set_attach_target() API
selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
selftests/bpf: Drop the need for LLVM's llc
selftests/bpf: fix bpf_testmod.ko recompilation logic
samples/bpf: Fix possible hang in xdpsock with multiple threads
selftests/bpf: Make selftest compilation work on clang 11
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
selftests/bpf: Drop tcp-{client,server}.py from Makefile
selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
selftests/bpf: Xsk selftests framework
bpf: Only provide bpf_sock_from_file with CONFIG_NET
bpf: Return -ENOTSUPP when attaching to non-kernel BTF
xsk: Validate socket state in xsk_recvmsg, prior touching socket members
...
====================
Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
Some cleanups for fs-verity:
- Rename some names that have been causing confusion.
- Move structs needed for file signing to the UAPI header.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCX9bedBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK7s6AQD4xMyyPTAQbznYlxPzn+2d8H3y+qik
xbX7JwATnyOM4AEApDMGPvokvmEJO4z/ionUunR20i//JIyOklxy8w4whQ0=
=XO4L
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Some cleanups for fs-verity:
- Rename some names that have been causing confusion
- Move structs needed for file signing to the UAPI header"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: move structs needed for file signing to UAPI header
fs-verity: rename "file measurement" to "file digest"
fs-verity: rename fsverity_signed_digest to fsverity_formatted_digest
fs-verity: remove filenames from file comments
This release there are some fixes for longstanding problems, as well as
some cleanups:
- Fix a race condition where a duplicate filename could be created in an
encrypted directory if a syscall that creates a new filename raced
with the directory's encryption key being added.
- Allow deleting files that use an unsupported encryption policy.
- Simplify the locking for 'struct fscrypt_master_key'.
- Remove kernel-internal constants from the UAPI header.
As usual, all these patches have been in linux-next with no reported
issues, and I've tested them with xfstests.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCX9bcDxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/HRAP95FGQqS47rIEh4LrvS7cohMJxb5NiX
KokAyB88GgmzLQD/c4Xh+iYOxxhFX5NRgruuoec876DrzsuNbEt7WNJ6CQc=
=CBoc
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release there are some fixes for longstanding problems, as well
as some cleanups:
- Fix a race condition where a duplicate filename could be created in
an encrypted directory if a syscall that creates a new filename
raced with the directory's encryption key being added.
- Allow deleting files that use an unsupported encryption policy.
- Simplify the locking for 'struct fscrypt_master_key'.
- Remove kernel-internal constants from the UAPI header.
As usual, all these patches have been in linux-next with no reported
issues, and I've tested them with xfstests"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: allow deleting files with unsupported encryption policy
fscrypt: unexport fscrypt_get_encryption_info()
fscrypt: move fscrypt_require_key() to fscrypt_private.h
fscrypt: move body of fscrypt_prepare_setattr() out-of-line
fscrypt: introduce fscrypt_prepare_readdir()
ext4: don't call fscrypt_get_encryption_info() from dx_show_leaf()
ubifs: remove ubifs_dir_open()
f2fs: remove f2fs_dir_open()
ext4: remove ext4_dir_open()
fscrypt: simplify master key locking
fscrypt: remove unnecessary calls to fscrypt_require_key()
ubifs: prevent creating duplicate encrypted filenames
f2fs: prevent creating duplicate encrypted filenames
ext4: prevent creating duplicate encrypted filenames
fscrypt: add fscrypt_is_nokey_name()
fscrypt: remove kernel-internal constants from UAPI header
-----BEGIN PGP SIGNATURE-----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=mi60
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some rework at the uAPI pixel format docs
- the smiapp driver has started to gain support for MIPI CSS camera
sensors and was renamed
- two new sensor drivers: ov02a10 and ov9734
- Meson gained a driver for the 2D acceleration unit
- Rockchip rkisp1 driver was promoted from staging
- Cedrus driver gained support for VP8
- two new remote controller keymaps were added
- the usual set of fixes cleanups and driver improvements
* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
media: ccs: Add support for obtaining C-PHY configuration from firmware
media: ccs-pll: Print pixel rates
media: ccs: Print written register values
media: ccs: Add support for DDR OP SYS and OP PIX clocks
media: ccs-pll: Add support for DDR OP system and pixel clocks
media: ccs: Dual PLL support
media: ccs-pll: Add trivial dual PLL support
media: ccs-pll: Separate VT divisor limit calculation from the rest
media: ccs-pll: Fix VT post-PLL divisor calculation
media: ccs-pll: Make VT divisors 16-bit
media: ccs-pll: Rework bounds checks
media: ccs-pll: Print relevant information on PLL tree
media: ccs-pll: Better separate OP and VT sub-tree calculation
media: ccs-pll: Check for derating and overrating, support non-derating sensors
media: ccs-pll: Split off VT subtree calculation
media: ccs-pll: Add C-PHY support
media: ccs-pll: Add sanity checks
media: ccs-pll: Add support flexible OP PLL pixel clock divider
media: ccs-pll: Support two cycles per pixel on OP domain
media: ccs-pll: Add support for extended input PLL clock divider
...
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support
-----BEGIN PGP SIGNATURE-----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=c9rl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
+ Set a handler for the witness notification messages received from the
userspace daemon.
+ Handle the resource state change notification. When the resource
becomes unavailable or available set the tcp status to
CifsNeedReconnect for all channels.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
+ Define the generic netlink family commands and message attributes to
communicate with the userspace daemon
+ The register and unregister commands are sent when connecting or
disconnecting a tree. The witness registration keeps a pointer to
the tcon and has the same lifetime.
+ Each registration has an id allocated by an IDR. This id is sent to the
userspace daemon in the register command, and will be included in the
notification messages from the userspace daemon to retrieve from the
IDR the matching registration.
+ The authentication information is bundled in the register message.
If kerberos is used the message just carries a flag.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Register a new generic netlink family to talk to the witness service
userspace daemon.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XcxYACgkQJNaLcl1U
h9ApEgf/ZkKxj1Nq6RCfUqhyGK2u1ktzCpnugvjHebutXV1LD0y+y0/CnjdN5Vou
8r+BsX6izfEx6JuZyu1ryQcz+Rsp6VH6uK9e/vRPExIkkAw+JQzEGVzQRyrnREoA
eV8BO92YKrRtJM1HoIBnQOhoWMc/4Kqi7hklaiXDhHRDGpLcbTyeVK8ROarORLcy
aupt7WinLvbhP++xjs9YR/RffjpwxyxOkmkIaM9TpkKqADays+sBDCZXSVgFjQik
1rFLQ8jYAb/EOPNdCXrMEILrSaNMCz719vh2gZkm1yYQ3Tp5dH9WGqLROq9Oy/D4
FaCGJoxX0HUe7MWbJeI97PFZB8i2gQ==
=iCuN
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
This patch adds three new netlink attributes to encapsulate a list of
expressions per set elements:
- NFTA_SET_EXPRESSIONS: this attribute provides the set definition in
terms of expressions. New set elements get attached the list of
expressions that is specified by this new netlink attribute.
- NFTA_SET_ELEM_EXPRESSIONS: this attribute allows users to restore (or
initialize) the stateful information of set elements when adding an
element to the set.
- NFTA_DYNSET_EXPRESSIONS: this attribute specifies the list of
expressions that the set element gets when it is inserted from the
packet path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* validate key indices for key deletion
* more preamble support in mac80211
* various 6 GHz scan fixes/improvements
* a common SAR power limitations API
* various small fixes & code improvements
-----BEGIN PGP SIGNATURE-----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=+qd6
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A new set of wireless changes:
* validate key indices for key deletion
* more preamble support in mac80211
* various 6 GHz scan fixes/improvements
* a common SAR power limitations API
* various small fixes & code improvements
* tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
mac80211: add ieee80211_set_sar_specs
nl80211: add common API to configure SAR power limitations
mac80211: fix a mistake check for rx_stats update
mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc
mac80211: Update rate control on channel change
mac80211: don't filter out beacons once we start CSA
mac80211: Fix calculation of minimal channel width
mac80211: ignore country element TX power on 6 GHz
mac80211: use bitfield helpers for BA session action frames
mac80211: support Rx timestamp calculation for all preamble types
mac80211: don't set set TDLS STA bandwidth wider than possible
mac80211: support driver-based disconnect with reconnect hint
cfg80211: support immediate reconnect request hint
mac80211: use struct assignment for he_obss_pd
cfg80211: remove struct ieee80211_he_bss_color
nl80211: validate key indexes for cfg80211_registered_device
cfg80211: include block-tx flag in channel switch started event
mac80211: disallow band-switch during CSA
ieee80211: update reduced neighbor report TBTT info length
cfg80211: Save the regulatory domain when setting custom regulatory
...
====================
Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change work and completion queues to use smp_load_acquire() and
smp_store_release() to synchronize between driver and users. This commit
goes with a matching series of commits in the rxe user space provider.
Link: https://lore.kernel.org/r/20201210174258.5234-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Fixes: eaa6bcb71e ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support to allow configuration of Intel Analytics Accelerator (IAX) in
addition to the Intel Data Streaming Accelerator (DSA). The IAX hardware
has the same configuration interface as DSA. The main difference
is the type of operations it performs. We can support the DSA and
IAX devices on the same driver with some tweaks.
IAX has a 64B completion record that needs to be 64B aligned, as opposed to
a 32B completion record that is 32B aligned for DSA. IAX also does not
support token management.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/160564555488.1834439.4261958859935360473.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
NL80211_CMD_SET_SAR_SPECS is added to configure SAR from
user space. NL80211_ATTR_SAR_SPEC is used to pass the SAR
power specification when used with NL80211_CMD_SET_SAR_SPECS.
Wireless driver needs to register SAR type, supported frequency
ranges to wiphy, so user space can query it. The index in
frequency range is used to specify which sub band the power
limitation applies to. The SAR type is for compatibility, so later
other SAR mechanism can be implemented without breaking the user
space SAR applications.
Normal process is user space queries the SAR capability, and
gets the index of supported frequency ranges and associates the
power limitation with this index and sends to kernel.
Here is an example of message send to kernel:
8c 00 00 00 08 00 01 00 00 00 00 00 38 00 2b 81
08 00 01 00 00 00 00 00 2c 00 02 80 14 00 00 80
08 00 02 00 00 00 00 00 08 00 01 00 38 00 00 00
14 00 01 80 08 00 02 00 01 00 00 00 08 00 01 00
48 00 00 00
NL80211_CMD_SET_SAR_SPECS: 0x8c
NL80211_ATTR_WIPHY: 0x01(phy idx is 0)
NL80211_ATTR_SAR_SPEC: 0x812b (NLA_NESTED)
NL80211_SAR_ATTR_TYPE: 0x00 (NL80211_SAR_TYPE_POWER)
NL80211_SAR_ATTR_SPECS: 0x8002 (NLA_NESTED)
freq range 0 power: 0x38 in 0.25dbm unit (14dbm)
freq range 1 power: 0x48 in 0.25dbm unit (18dbm)
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Abhishek Kumar <kuabhs@chromium.org>
Link: https://lore.kernel.org/r/20201203103728.3034-2-cjhuang@codeaurora.org
[minor edits, NLA parse cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The WLAN device may exist yet not be usable. This can happen
when the WLAN device is controllable by both the host and
some platform internal component.
We need some arbritration that is vendor specific, but when
the device is not available for the host, we need to reflect
this state towards the user space.
Add a reason field to the rfkill object (and event) so that
userspace can know why the device is in rfkill: because some
other platform component currently owns the device, or
because the actual hw rfkill signal is asserted.
Capable userspace can now determine the reason for the rfkill
and possibly do some negotiation on a side band channel using
a proprietary protocol to gain ownership on the device in case
the device is owned by some other component. When the host
gains ownership on the device, the kernel can remove the
RFKILL_HARD_BLOCK_NOT_OWNER reason and the hw rfkill state
will be off. Then, the userspace can bring the device up and
start normal operation.
The rfkill_event structure is enlarged to include the additional
byte, it is now 9 bytes long. Old user space will ask to read
only 8 bytes so that the kernel can know not to feed them with
more data. When the user space writes 8 bytes, new kernels will
just read what is present in the file descriptor. This new byte
is read only from the userspace standpoint anyway.
If a new user space uses an old kernel, it'll ask to read 9 bytes
but will get only 8, and it'll know that it didn't get the new
state. When it'll write 9 bytes, the kernel will again ignore
this new byte which is read only from the userspace standpoint.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20201104134641.28816-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new ioctl pair allows two ppp channels to be bridged together:
frames arriving in one channel are transmitted in the other channel
and vice versa.
The practical use for this is primarily to support the L2TP Access
Concentrator use-case. The end-user session is presented as a ppp
channel (typically PPPoE, although it could be e.g. PPPoA, or even PPP
over a serial link) and is switched into a PPPoL2TP session for
transmission to the LNS. At the LNS the PPP session is terminated in
the ISP's network.
When a PPP channel is bridged to another it takes a reference on the
other's struct ppp_file. This reference is dropped when the channels
are unbridged, which can occur either explicitly on userspace calling
the PPPIOCUNBRIDGECHAN ioctl, or implicitly when either channel in the
bridge is unregistered.
In order to implement the channel bridge, struct channel is extended
with a new field, 'bridge', which points to the other struct channel
making up the bridge.
This pointer is RCU protected to avoid adding another lock to the data
path.
To guard against concurrent writes to the pointer, the existing struct
channel lock 'upl' coverage is extended rather than adding a new lock.
The 'upl' lock is used to protect the existing unit pointer. Since the
bridge effectively replaces the unit (they're mutually exclusive for a
channel) it makes coding easier to use the same lock to cover them
both.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP
socket is switched into functional addressing mode, where only single frame
(SF) protocol data units can be send on the specified CAN interface and the
given tp.tx_id after bind().
In opposite to normal and extended addressing this socket does not register a
CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a
segmented bi-directional data transfer.
Sending SFs on this socket is therefore a TX-only 'broadcast' operation.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Thomas Wagner <thwa1@web.de>
Link: https://lore.kernel.org/r/20201206144731.4609-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Support timeout updates through IORING_OP_TIMEOUT_REMOVE with passed in
IORING_TIMEOUT_UPDATE. Updates doesn't support offset timeout mode.
Oirignal timeout.off will be ignored as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: remove now unused 'ret' variable]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now users who want to get woken when waiting for events should submit a
timeout command first. It is not safe for applications that split SQ and
CQ handling between two threads, such as mysql. Users should synchronize
the two threads explicitly to protect SQ and that will impact the
performance.
This patch adds support for timeout to existing io_uring_enter(). To
avoid overloading arguments, it introduces a new parameter structure
which contains sigmask and timeout.
I have tested the workloads with one thread submiting nop requests
while the other reaping the cqe with timeout. It shows 1.8~2x faster
when the iodepth is 16.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
[axboe: various cleanups/fixes, and name change to SIG_IS_DATA]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The restriction of needing fixed files for SQPOLL is problematic, and
prevents/inhibits several valid uses cases. With the referenced
files_struct that we have now, it's trivially supportable.
Treat ->files like we do the mm for the SQPOLL thread - grab a reference
to it (and assign it), and drop it when we're done.
This feature is exposed as IORING_FEAT_SQPOLL_NONFIXED.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Btrfs only support 64K as maximum node size, thus for 4K page system, we
would have at most 16 pages for one extent buffer.
For a system using 64K page size, we would really have just one page.
While we always use 16 pages for extent_buffer::pages, this means for
systems using 64K pages, we are wasting memory for 15 page pointers
which will never be used.
Calculate the array size based on page size and the node size maximum.
- for systems using 4K page size, it will stay 16 pages
- for systems using 64K page size, it will be 1 page
Move the definition of BTRFS_MAX_METADATA_BLOCKSIZE to btrfs_tree.h, to
avoid circular inclusion of ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a per-transaction flag to indicate that the buffer
must be cleared when the transaction is complete to
prevent copies of sensitive data from being preserved
in memory.
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20201120233743.3617529-1-tkjos@google.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the ZONED incompat flag. The flag indicates that
the volume management will satisfy the constraints imposed by
host-managed zoned block devices (aligned chunk allocation, append-only
updates, reset zone after filled).
As the zoned support will happen incrementally due to enhancing some
core infrastructure like super block writes, tree-log, raid support, the
feature will appear in sysfs only on debug builds. It will be enabled
once the support is feature complete and applications can reliably check
whether zoned support is present or not.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These flags will be returned to the userspace through ABI, so they should
be defined in hns-abi.h. Furthermore, there is no need to include
hns-abi.h in every source files, it just needs to be included in the
common header file.
Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Low level mlx5 updates required by both netdev and rdma trees:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl/IOZcACgkQSD+KveBX
+j4J8wgAuxwflrYrbCWXV7LE08J7T7ZHRDE+jEbaZ0Zp9mOsYDDpcifpKwy2EVRf
RKcpMYh/GzAljmEpeWIAlMxmlpXhKWXTDruWCx73r1jvdXf/RU24/zQHa6BjeiDo
rMB8bgiW4a66+z4LcN/U6ahbVM5gScBNEt2sS1OIi9ZInngGVo9FgfhYMpERPNcH
3+mcHulCnGBNbbLwoTllOcgbxexn+xoByukg5Z0ddBJp007DMjzBIWDpDS0y2HaT
jGo1LYONgRc3zoGVmdeu9F+tSsWBIgsaiyGxKj1T/8sZUaNz2TKj9VOiYIj9BLff
cp6GRc88k7HWA4tImSHQiLbK6cx+yA==
=mjvI
-----END PGP SIGNATURE-----
Merge tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-2020-12-02
Low level mlx5 updates required by both netdev and rdma trees:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
====================
Link: https://lore.kernel.org/r/20201203011010.213440-1-saeedm@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The naming scheme for the RGB pixel formats has been developed
organically, and isn't consistent between formats using less than 8 bits
per pixels (mostly stored in 1 or 2 bytes per pixel, except for RGB666
that uses 4 bytes per pixel) and formats with 8 bits per pixel (stored
in 3 or 4 bytes). For the latter category, the names use a components
order convention that is the opposite of the first category, and the
opposite of DRM pixel formats. This has led to lots of confusion in the
past, and would really benefit from being explained more precisely. Do
so, which also prepares for the addition of additional RGB pixels
formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HM12 is a YUV semi-planar macro-block format. Move it from
the packed YUV formats section where it was misplaced to the YUV
semi-planar formats section.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HI240 is a 8-bit dithered RGB format specific to BTTV. Move
it from the packed YUV formats section where it was misplaced to the
vendor-specific formats section.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_BGRA444 format has a comment that explains why its 4CC
value is GA12. This explains the development history and isn't of much
interest to readers, it should have been part of a commit message
instead. Drop the comment, anyone interested in history can turn to git.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
-----BEGIN PGP SIGNATURE-----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=tNKF
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
* tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused soft-interface.h include in fragmentation.c
batman-adv: Drop legacy code for auto deleting mesh interfaces
batman-adv: Drop deprecated debugfs support
batman-adv: Drop deprecated sysfs support
batman-adv: Allow selection of routing algorithm over rtnetlink
batman-adv: Prepare infrastructure for newlink settings
batman-adv: Add new include for min/max helpers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using CLOCK_REALTIME as the source for event timestamps is crucial for
some specific applications, particularly those requiring timetamps
relative to a PTP clock, so provide an option to switch the event
timestamp source from the default CLOCK_MONOTONIC to CLOCK_REALTIME.
Note that CLOCK_REALTIME was the default source clock for GPIO until
Linux 5.7 when it was changed to CLOCK_MONOTONIC due to issues with the
shifting of the realtime clock.
Providing this option maintains the CLOCK_MONOTONIC as the default,
while also providing a path forward for those dependent on the pre-5.7
behaviour.
Suggested-by: Jack Winch <sunt.un.morcov@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20201014231158.34117-2-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Zapping pages is required only if we are calling vm_insert_page into a
region where pages had previously been mapped. Receive zerocopy allows
reusing such regions, and hitherto called zap_page_range() before
calling vm_insert_page() in that range.
zap_page_range() can also be triggered from userspace with
madvise(MADV_DONTNEED). If userspace is configured to call this before
reusing a segment, or if there was nothing mapped at this virtual
address to begin with, we can avoid calling zap_page_range() under the
socket lock. That said, if userspace does not do that, then we are
still responsible for calling zap_page_range().
This patch adds a flag that the user can use to hint to the kernel
that a zap is not required. If the flag is not set, or if an older
user application does not have a flags field at all, then the kernel
calls zap_page_range as before. Also, if the flag is set but a zap is
still required, the kernel performs that zap as necessary. Thus
incorrectly indicating that a zap can be avoided does not change the
correctness of operation. It also increases the batchsize for
vm_insert_pages and prefetches the page struct for the batch since
we're about to bump the refcount.
An alternative mechanism could be to not have a flag, assume by
default a zap is not needed, and fall back to zapping if needed.
However, this would harm performance for older applications for which
a zap is necessary, and thus we implement it with an explicit flag
so newer applications can opt in.
When using RPC-style traffic with medium sized (tens of KB) RPCs, this
change yields an efficency improvement of about 30% for QPS/CPU usage.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP receive zerocopy does not successfully map the entire
requested space, it outputs a 'hint' that the caller should recvmsg().
Augment zerocopy to accept a user buffer that it tries to copy this
hint into - if it is possible to copy the entire hint, it will do so.
This elides a recvmsg() call for received traffic that isn't exactly
page-aligned in size.
This was tested with RPC-style traffic of arbitrary sizes. Normally,
each received message required at least one getsockopt() call, and one
recvmsg() call for the remaining unaligned data.
With this change, almost all of the recvmsg() calls are eliminated,
leading to a savings of about 25%-50% in number of system calls
for RPC-style workloads.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While eBPF programs can check whether a file is a socket by file->f_op
== &socket_file_ops, they cannot convert the void private_data pointer
to a struct socket BTF pointer. In order to do this a new helper
wrapping sock_from_file is added.
This is useful to tracing programs but also other program types
inheriting this set of helpers such as iterators or LSM programs.
Signed-off-by: Florent Revest <revest@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201204113609.1850150-2-revest@google.com
SRv6 End.DT4 is defined in the SRv6 Network Programming [1].
The SRv6 End.DT4 is used to implement IPv4 L3VPN use-cases in
multi-tenants environments. It decapsulates the received packets and it
performs IPv4 routing lookup in the routing table of the tenant.
The SRv6 End.DT4 Linux implementation leverages a VRF device in order to
force the routing lookup into the associated routing table.
To make the End.DT4 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one
VRF during the tunnel creation. Such constraint has to be enforced by
enabling the VRF strict_mode sysctl parameter, i.e:
$ sysctl -wq net.vrf.strict_mode=1.
At JANOG44, LINE corporation presented their multi-tenant DC architecture
using SRv6 [2]. In the slides, they reported that the Linux kernel is
missing the support of SRv6 End.DT4 behavior.
The SRv6 End.DT4 behavior can be instantiated using a command similar to
the following:
$ ip route add 2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0
We introduce the "vrftable" extension in iproute2 in a following patch.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
[2] https://speakerdeck.com/line_developers/line-data-center-networking-with-srv6
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/KnpUACgkQJNaLcl1U
h9CWvQf9EdHZFlsDiP8PbbSLtMzpkqaJOlmg3A1Rn6XOYjztDEDQQp12vYC9jOmJ
PkBz8kh+0dohTt6TIx5IEt+r1pbYWAzFOkX7v3QzYp8+nrmd1bT/RDRglOrmydLH
ntd9XNE1BA8k9n4YQQBWrspDEnwnpCygSw4lP/QXz7OyyhnZ7fYGOG3hPXKw+Sdj
gQugmSAnUYaVti4d7K6Cuhj08HT13FvGFqrkLYljTmsnnVw0T4kXNFtiODMe1QMq
YYeKiHCFI8ysk2hK0sYdmwr5rz5eWT5mGnSXPGsD3o876NF1uw+Q5iTX57uydDrp
GijjnCOGz+yZ7dfBi2MAflP5Xsw4ew==
=SVwj
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a Root Complex Integrated Endpoint (RCiEP) is implemented, it may signal
errors through a Root Complex Event Collector (RCEC). Each RCiEP must be
associated with no more than one RCEC.
For an RCEC (which is technically not a Bridge), error messages "received"
from associated RCiEPs must be enabled for "transmission" in order to cause
a System Error via the Root Control register or (when the Advanced Error
Reporting Capability is present) reporting via the Root Error Command
register and logging in the Root Error Status register and Error Source
Identification register.
Given the commonality with Root Ports and the need to also support AER and
PME services for RCECs, extend the Root Port driver to support RCEC devices
by adding the RCEC Class ID to the driver structure.
Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
Link: https://lore.kernel.org/r/20201121001036.8560-3-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the flag CLOSE_RANGE_CLOEXEC is set, close_range doesn't
immediately close the files but it sets the close-on-exec bit.
It is useful for e.g. container runtimes that usually install a
seccomp profile "as late as possible" before execv'ing the container
process itself. The container runtime could either do:
1 2
- install_seccomp_profile(); - close_range(MIN_FD, MAX_INT, 0);
- close_range(MIN_FD, MAX_INT, 0); - install_seccomp_profile();
- execve(...); - execve(...);
Both alternative have some disadvantages.
In the first variant the seccomp_profile cannot block the close_range
syscall, as well as opendir/read/close/... for the fallback on older
kernels.
In the second variant, close_range() can be used only on the fds
that are not going to be needed by the runtime anymore, and it must be
potentially called multiple times to account for the different ranges
that must be closed.
Using close_range(..., ..., CLOSE_RANGE_CLOEXEC) solves these issues.
The runtime is able to use the existing open fds, the seccomp profile
can block close_range() and the syscalls used for its fallback.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Link: https://lore.kernel.org/r/20201118104746.873084-2-gscrivan@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This
algorithm has to be selected before the interface is initialized and cannot
be changed after that. The only way to select this algorithm was a module
parameter which specifies the default algorithm used during the creation of
the net_device.
This module parameter is writeable over
/sys/module/batman_adv/parameters/routing_algo and thus allows switching of
the routing algorithm:
1. change routing_algo parameter
2. create new batadv net_device
But this is not race free because another process can be scheduled between
1 + 2 and in that time frame change the routing_algo parameter again.
It is much cleaner to directly provide this information inside the
rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of
the creation parameter of their batadv interfaces) be isolated. This also
eases the integration of batadv devices inside tools like network-manager
or systemd-networkd which are not expecting to operate on /sys before a new
net_device is created.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv generic netlink family can be used to retrieve the current state
and set various configuration settings. But there are also settings which
must be set before the actual interface is created.
The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to
transfer such configurations. The minimal required functionality for this
is now available for the batadv rtnl_link_ops. Also a new IFLA class of
attributes will be attached to it because rtnetlink only allows 51
different attributes but batadv_nl_attrs already contains 62 attributes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Add ability for user-space programs to specify non-vmlinux BTF when attaching
BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this,
attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD
of a module or vmlinux BTF object. For backwards compatibility reasons,
0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org
The device is being unplugged, so pass the request to userspace to
ask for a graceful cleanup. This should free up the thread that
would otherwise loop waiting for the device to be fully released.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
STATX_ATTR_MOUNT_ROOT and STATX_ATTR_DAX got merged with the same value,
so one of them needs fixing. Move STATX_ATTR_DAX.
While we're in here, clarify the value-matching scheme for some of the
attributes, and explain why the value for DAX does not match.
Fixes: 80340fe360 ("statx: add mount_root")
Fixes: 712b2698e4 ("fs/stat: Define DAX statx attribute")
Link: https://lore.kernel.org/linux-fsdevel/7027520f-7c79-087e-1d00-743bdefa1a1e@redhat.com/
Link: https://lore.kernel.org/lkml/20201202214629.1563760-1-ira.weiny@intel.com/
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Background:
Broadcast and multicast packages are enqueued for later processing.
This queue was previously hardcoded to 1000.
This proved insufficient for handling very high packet rates.
This resulted in packet drops for multicast.
While at the same time unicast worked fine.
The change:
This patch make the queue length adjustable to accommodate
for environments with very high multicast packet rate.
But still keeps the default value of 1000 unless specified.
The queue length is specified as a request per macvlan
using the IFLA_MACVLAN_BC_QUEUE_LEN parameter.
The actual used queue length will then be the maximum of
any macvlan connected to the same port. The actual used
queue length for the port can be retrieved (read only)
by the IFLA_MACVLAN_BC_QUEUE_LEN_USED parameter for verification.
This will be followed up by a patch to iproute2
in order to adjust the parameter from userspace.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Link: https://lore.kernel.org/r/dd4673b2-7eab-edda-6815-85c67ce87f63@paneda.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (fwht-ctrls.h).
Now, the FWHT stateless controls is ready to be part
of the stable uAPI.
While not too late:
- Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS.
- Move the contents of fwht-ctrls.h to v4l2-controls.h.
- Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h
to v4l2-controls.h.
- Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation.
- Add p_fwht_params to struct v4l2_ext_control.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The H.264 stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (h264-ctrls.h).
Now, the H264 stateless controls is ready to be part
of the stable uAPI.
While not too late, let's rename them and re-number their
control IDs, moving them to the newly created stateless
control class, and updating all the drivers accordingly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the H264 stateless control types out of staging,
and re-number them to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since we are ready to stabilize the H264 stateless API,
start by first moving the parsed H264 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a new control class to hold the stateless codecs controls
that are ready to be moved out of staging.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For historical reasons, stateful codec controls are named
as {}_MPEG_{}. While we can't at this point sanely
change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER),
we can least change the more meaningful macros such as classes
macros.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Added two ioctl to decompress/compress explicitly the compression
enabled file in "compress_mode=user" mount option.
Using these two ioctls, the users can make a control of compression
and decompression of their files.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Low level mlx5 updates required by both netdev and rdma trees:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl/IOZcACgkQSD+KveBX
+j4J8wgAuxwflrYrbCWXV7LE08J7T7ZHRDE+jEbaZ0Zp9mOsYDDpcifpKwy2EVRf
RKcpMYh/GzAljmEpeWIAlMxmlpXhKWXTDruWCx73r1jvdXf/RU24/zQHa6BjeiDo
rMB8bgiW4a66+z4LcN/U6ahbVM5gScBNEt2sS1OIi9ZInngGVo9FgfhYMpERPNcH
3+mcHulCnGBNbbLwoTllOcgbxexn+xoByukg5Z0ddBJp007DMjzBIWDpDS0y2HaT
jGo1LYONgRc3zoGVmdeu9F+tSsWBIgsaiyGxKj1T/8sZUaNz2TKj9VOiYIj9BLff
cp6GRc88k7HWA4tImSHQiLbK6cx+yA==
=mjvI
-----END PGP SIGNATURE-----
Merge tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-2020-12-02
Low level mlx5 updates required by both netdev and rdma trees.
* tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
====================
Link: https://lore.kernel.org/r/20201203011010.213440-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a mechanism to quickly disable/enable syscall handling for a
specific process and redirect to userspace via SIGSYS. This is useful
for processes with parts that require syscall redirection and parts that
don't, but who need to perform this boundary crossing really fast,
without paying the cost of a system call to reconfigure syscall handling
on each boundary transition. This is particularly important for Windows
games running over Wine.
The proposed interface looks like this:
prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector])
The range [<offset>,<offset>+<length>) is a part of the process memory
map that is allowed to by-pass the redirection code and dispatch
syscalls directly, such that in fast paths a process doesn't need to
disable the trap nor the kernel has to check the selector. This is
essential to return from SIGSYS to a blocked area without triggering
another SIGSYS from rt_sigreturn.
selector is an optional pointer to a char-sized userspace memory region
that has a key switch for the mechanism. This key switch is set to
either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the
redirection without calling the kernel.
The feature is meant to be set per-thread and it is disabled on
fork/clone/execv.
Internally, this doesn't add overhead to the syscall hot path, and it
requires very little per-architecture support. I avoided using seccomp,
even though it duplicates some functionality, due to previous feedback
that maybe it shouldn't mix with seccomp since it is not a security
mechanism. And obviously, this should never be considered a security
mechanism, since any part of the program can by-pass it by using the
syscall dispatcher.
For the sysinfo benchmark, which measures the overhead added to
executing a native syscall that doesn't require interception, the
overhead using only the direct dispatcher region to issue syscalls is
pretty much irrelevant. The overhead of using the selector goes around
40ns for a native (unredirected) syscall in my system, and it is (as
expected) dominated by the supervisor-mode user-address access. In
fact, with SMAP off, the overhead is consistently less than 5ns on my
test box.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
It seems like we can't have nice things, so let's just document the
disappointing behaviour instead.
The previous version assumed the kernel would perform the probing work
when appropriate, however this is not the case today. Update the
documentation to reflect reality.
v2:
- Improve commit message to explain why this change is made (Pekka)
- Keep the bit about flickering (Daniel)
- Explain when user-space should force-probe, and when it shouldn't (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 2ac5ef3b23 ("drm: document drm_mode_get_connector")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/AxqLnTAsFCRishOVB5CLsqIesmrMrm7oytnOVB7oPA@cp7-web-043.plabs.ch
Adding any kinds of "last" abi markers is usually a mistake which I
repeated when implementing the PMU because it felt convenient at the time.
This patch marks I915_PMU_LAST as deprecated and stops the internal
implementation using it for sizing the event status bitmask and array.
New way of sizing the fields is a bit less elegant, but it omits reserving
slots for tracking events we are not interested in, and as such saves some
runtime space. Adding sampling events is likely to be a special event and
the new plumbing needed will be easily detected in testing. Existing
asserts against the bitfield and array sizes are keeping the code safe.
First event which gets the new treatment in this new scheme are the
interrupts - which neither needs any tracking in i915 pmu nor needs
waking up the GPU to read it.
v2:
* Streamline helper names. (Chris)
v3:
* Comment which events need tracking. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201131757.206367-1-tvrtko.ursulin@linux.intel.com
SYS_USER_DISPATCH will be triggered when a syscall is sent to userspace
by the Syscall User Dispatch mechanism. This adjusts eventual
BUILD_BUG_ON around the tree.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201127193238.821364-3-krisman@collabora.com
Introduce get link command which loops through
all available links of all available link groups. It
uses the SMC-R linkgroup list as entry point, not
the socket list, which makes linkgroup diagnosis
possible, in case linkgroup does not contain active
connections anymore.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce get linkgroup command which loops through
all available SMCR linkgroups. It uses the SMC-R linkgroup
list as entry point, not the socket list, which makes
linkgroup diagnosis possible, in case linkgroup does not
contain active connections anymore.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new netlink command to obtain system information
of the smc module.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into patchwork
Linux 5.10-rc6
* tag 'v5.10-rc6': (1815 commits)
Linux 5.10-rc6
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
x86/mce: Do not overwrite no_way_out if mce_end() fails
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
printk: finalize records with trailing newlines
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
...
This option lets a user set a per socket NAPI budget for
busy-polling. If the options is not set, it will use the default of 8.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
Praveen Chaudhary
Hans Verkuil
Justin Iurman
Scott Branden
Chuck Lever
Greg Kroah-Hartman
Dave Airlie
Christian Brauner
Rasmus Villemoes
Maxim Mikityanskiy
Arjun Roy
Yousuk Seung
Parav Pandit
Radhakrishna Sripada
Wolfram Sang
wenxu
Jianxin Xiong
Daniel Vetter
Jarod Wilson
Bryan Tan
Thinh Nguyen
Alexandre Belloni
Pravin B Shelar
Jakub Kicinski
Uwe Kleine-König
Jiri Olsa
Brendan Jackman
Dikshita Agarwal
Mark Brown
Sakari Ailus
Simon Ser
Danilo Carvalho
Linus Torvalds
Geliang Tang
Coly Li
Tom Lendacky
Paolo Bonzini
Jiri Slaby
Maximilian Luz
Jens Axboe
Dave Penkler
Dragos Bogdan
Alexandru Ardelean
Pablo Neira Ayuso
Alon Mizrahi
Guillaume Nault
Willem de Bruijn
Enrico Weigelt, metux IT consult
Chris Wilson
Tobias Klauser
Jiri Kosina
Bjorn Helgaas
Lokesh Gidra
Petr Vorel
Maarten Lankhorst
Andra Paraschiv
Samuel Cabrero
Takashi Iwai
Bob Pearson
Andrii Nakryiko
Dave Jiang
Carl Huang
Johannes Berg
Emmanuel Grumbach
Tom Parkin
Oliver Hartkopp
Pavel Begunkov
Hao Xu
Qu Wenruo
Todd Kjos
Naohiro Aota
Weihang Li
Jason Gunthorpe
Laurent Pinchart
Kent Gibson
Florent Revest
Andrea Mayer
Qiuxu Zhuo
Giuseppe Scrivano
Sven Eckelmann
Eric Farman
Eric Sandeen
Thomas Karlsson
Ezequiel Garcia
Daeho Jeong
Gabriel Krisman Bertazi
Tvrtko Ursulin
Guvenc Gulce
Mauro Carvalho Chehab
Björn Töpel