Граф коммитов

468 Коммитов

Автор SHA1 Сообщение Дата
Maxime Ripard 1f9f6a7873 ARM: sunxi: DT: Convert the DTs to use a header for the DMA arguments
The DMA engine for the A10/A20 and derivatives require an opaque extra
argument.

Add a dt-bindings header, and convert the device trees to it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:56 +01:00
Oleksij Rempel ec6415dc41 ARM: clk: add clk-asm9260 driver
Provide CLK support for Alphascale ASM9260 SoC.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-20 10:10:51 -08:00
Tony Lindgren ac7452cee7 ARM: dts: Add minimal support for dm8168-evm
This allows booting the device with basic functionality.

Note that at least on my revision c board the DDR3 does
not seem to work properly and only some of the memory
can be reliably used.

Also, the mainline u-boot does not seem to properly
initialize the ethernet, so I've been using the old TI
u-boot at:

http://arago-project.org/git/projects/?p=u-boot-omap3.git;a=summary

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-19 11:47:35 -08:00
Maxime COQUELIN 63f3171d5e ARM: dts: Add STiH418 SoC support
The STiH418 is advanced UHD 60fps AVC processor with 3D graphic acceleration and
quad-core ARM Cortex A9 CPU.

Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-16 11:57:48 +01:00
Padmavathi Venna 9f930a39e1 clk: samsung: exynos7: add clocks for audio block
Add required clk support for I2S, PCM and SPDIF.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Reviewed-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-01-15 15:18:51 +01:00
Padmavathi Venna ee74b56ab2 clk: samsung: exynos7: add clocks for SPI block
Add clock support for 5 SPI channels.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-01-15 15:11:40 +01:00
Padmavathi Venna 9cc2a0c95f clk: samsung: exynos7: add gate clock for DMA block
Add support for PDMA0 and PDMA1 gate clks.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-01-15 15:11:40 +01:00
Sylwester Nawrocki 0d40c61279 ASoC: samsung: i2s: Add clk provider DT binding documentation
The new DT properties required for the I2S device node to be referred
as a clock provider and corresponding clock indices definition is added.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:46:54 +00:00
Geert Uytterhoeven d6613aa750 ARM: dt: GIC: Spelling s/specific/specifier/, s/flaggs/flags/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2015-01-13 13:48:16 -06:00
Sanchayan Maity c205389557 ARM: imx: clk-vf610: Add clock for SNVS
Add support for clock gating of the SNVS peripheral.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-13 19:16:26 +08:00
Olof Johansson 58bdda1b57 Renesas ARM Based SoC sh73a0 CCF Updates for v3.20
* Add sh73a0 CCF support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIbBAABAgAGBQJUoJScAAoJENfPZGlqN0++sooP92KxIGVy7MKx/w5BSpDuePVc
 4hkqvnsVhhAoZ/deNopVhEhYabHEkf/G3Feeh3Zahr1RRSCZf2Tz2FY6+FiP22wn
 42CQjs8fmfHM4ibGqZpfqu/2M+nW+ceJ3c89F+l2M8IUTDuAt0SL/pUKo7fxczUC
 cfx3ZLRARpZH7eR/lyialrJInojldxb0GeK5sfacOCOXsOSr8Dn9LwD1o7P+TU3M
 MqL+e/VBXwBVElv5+2pk1p/x4Dhauoj6xEbSW6Nn0AjD9PP2HwxR3qLaltrbU7ad
 U8KKQON9P5cn4i/lblpiKvMAEE8lcpgGMnr0UE6+k2+z/oAQM31ooZhRuMoV1MsM
 JkPHx0iDhqWAxEM3a+bx7jEieH8EzG9fLzJfaU5ga4HhMdfl1pY1NYWaZe4ZiPqE
 K3Y3bFPkBTOrP1OOEXaNpIQdmKTrv0yAb4Y0PkxwPA9NGxWf+ci8ut/eqC2uyYFE
 qf8Jp+OB3QDNMObvhi6y44uPHTVEBDFOCwit0muJ70IrzOqpVVwyaMYsFtvrGnuu
 WvNBanNfpj1/1HkSkAtuAJasJ+LtIGH8cxvuIrfj3g+O55kJVzsCJFoEb1rzdmZp
 hjylXR07GRiCaXU24xxqYSSBWP6WMW9i2sIxYros241sDnsWyu3ydXlZBL0mh3rs
 79ax88sekME0duLB720=
 =zFTr
 -----END PGP SIGNATURE-----

Merge tag 'renesas-sh73a0-ccf-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Merge "Renesas ARM Based SoC sh73a0 CCF Updates for v3.20" from Simon Horman:

* Add sh73a0 CCF support

* tag 'renesas-sh73a0-ccf-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0: disable legacy clock initialization
  ARM: shmobile: sh73a0: add MSTP clock assignments to DT
  ARM: shmobile: kzm9g-reference: Common clock framework DT description
  ARM: shmobile: sh73a0: Common clock framework DT description
  ARM: shmobile: sh73a0: Add CPG register bits header
  clk: shmobile: sh73a0 common clock framework implementation

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-12 14:32:47 -08:00
Olof Johansson 0dc4849528 Renesas ARM Based SoC DT Updates for v3.20
* Use clock-indices instead of deprecated renesas,clock-indices
 * Prepare for r8a73a4 multiplatform support
 * Increase clock coverage for r8a779[014]
 * Correct r8a7779 clock usage
 * Correct LAN9220 VDDVARIO voltage on ape6evm
 * Correct QSPI SPI-Flash mode of lager and koelsch
 * Correct flash partition label and size on koelsch
 * Correct mask for GIC PPI interrupts on r8a779[14]
 * Correct BSC bus range on ape6evm-reference
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUoJ1RAAoJENfPZGlqN0+++ugP/iUvSPavdjaBw2poMzIq5UUG
 z3XwLVTUHOB4fg8vguwzTnu9YyEH9yqqqmRhvdehbc4WvdffjXqAVbVvTChm1DmA
 kcfEYvGfID198jGBxLJFmFEnr04DiaEtbaLlhh4RpI6MmwmQMR9qiROA3x8fp2TX
 u4UPgh53VtBxDZAlpKkJyCwcycilNkclrcMOmbBeLy9VV2FKM8nFQmrmwp9AWjyV
 sBm6vcC2+AeFi7qxxEz7sDsbiDXrDAdDIznQ78ikme46qobpMQagK2EqH/4rfbYI
 0rxUlrzcuQlO4jzicpIRZQ9hZYEuYTwFZDcSWyhiNywg7MRd6HqxLoe231jGVu9a
 kynajAt29g6k35ObbtvWZDSQOnMTSS1fh5kYCgSegZzcjWBSERtMTj/J3UAv62C7
 AgBgsN1bFLXQjNyUvf5k863ISVxAJBV4Cdpwe+j38tprWjlVeNNfV9sq0/35OK1h
 GucAsjaonNh1xfxsAUp4o0OFWSB3q5D/7NyOB2bxE4BwDvImrszaksp+/9bsDJuX
 mrDdL1WPHv3hAdsp79AO4DkTvNN0k0dOqmJpDn//R2gxZXTkmSEThgjTBixc0t8z
 jtKw8wucndEtBKYfhR3C3ZvaLoE1QqbUDIRCdGkcUtN/Ezd5dwMql2GoDw0KdfE7
 mIqr3Ga6UzjSt5hCu0sw
 =fZ4r
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v3.20" from Simon Horman:

* Use clock-indices instead of deprecated renesas,clock-indices
* Prepare for r8a73a4 multiplatform support
* Increase clock coverage for r8a779[014]
* Correct r8a7779 clock usage
* Correct LAN9220 VDDVARIO voltage on ape6evm
* Correct QSPI SPI-Flash mode of lager and koelsch
* Correct flash partition label and size on koelsch
* Correct mask for GIC PPI interrupts on r8a779[14]
* Correct BSC bus range on ape6evm-reference

* tag 'renesas-dt-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (30 commits)
  ARM: shmobile: r8a7791: add MLB+ clock
  ARM: shmobile: r8a7790: add MLB+ clock
  ARM: shmobile: ape6evm: Fix LAN9220 VDDVARIO voltage
  ARM: shmobile: r8a73a4: Add r8a73a4-ape6evm.dtb to ARCH_SHMOBILE_MULTI
  ARM: shmobile: ape6evm: Add keypad to the device tree
  ARM: shmobile: ape6evm: Add LEDs to the device tree
  ARM: shmobile: ape6evm: synchronize dts with reference platform
  ARM: shmobile: ape6evm: fix compatible string for Ethernet controller
  ARM: shmobile: r8a7794: Add MMCIF clock to device tree
  ARM: shmobile: r8a7794: Add SDHI clocks to device tree
  ARM: shmobile: r8a7794: Add I2C clocks to device tree
  ARM: shmobile: r8a7779: Add TWD device to DTS
  ARM: shmobile: r8a7779: Use MSTP for SCIF clocks
  ARM: shmobile: r8a7779: Use R8A7779_CLK_P as SCIF parent clock
  ARM: shmobile: r8a7794: Add QSPI clock to device tree
  ARM: shmobile: lager: Fix QSPI mode of SPI-Flash into mode3
  ARM: shmobile: r8a7794: Add SYS-DMAC clocks to device tree
  ARM: shmobile: r8a7791: Add IPMMU-SGX clock to device tree
  ARM: shmobile: koelsch: Fix QSPI mode of SPI-Flash into mode3
  ARM: shmobile: r8a7794: Add USBDMAC[01] clocks to device tree
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-12 14:24:07 -08:00
Huang Lin 19da34b40e clk: rockchip: add clock IDs for the PVTM clocks
Process-Voltage-Temperature Monitor has two clocks, PVTM_CORE and
PVTM_GPU.

Signed-off-by: Huang Lin <hl@rock-chips.com>
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-12 21:39:38 +01:00
Kever Yang 19ce828cbc clk: rockchip: add clock ID for usbphy480m_src
There are 3 different parent clock from different usbphy,
all of them are fixed 480MHz, it is not able to auto select
by clock core to the 2nd and the 3rd parent.
For different use case for different board, we may need to
select different usbphy clock out as parent manually.

Add the clock ID for it so that we can use in dts.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-12 21:38:08 +01:00
Roger Chen 3cf8e53a48 GMAC: define clock ID used for GMAC
changes since v2:
1. remove SCLK_MAC_PLL

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 19:14:18 -05:00
Vivek Gautam 83f191a7cd clk: samsung: exynos7: Add required clock tree for USB
Adding required gate clocks for USB3.0 DRD controller
present on Exynos7.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-23 12:02:14 +01:00
Tony K Nadackal 49cab82cb8 clk: samsung: exynos7: Add clocks for MSCL block
Add clock support for the MSCL block for Exynos7.

Signed-off-by: Tony K Nadackal <tony.kn@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-23 12:01:14 +01:00
Andrey Gusakov 7408d3061d ARM: shmobile: r8a7791: add MLB+ clock
Add MLB+ clock to R8A7791 device tree.

Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
[Sergei: rebased, renamed, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-23 09:18:23 +09:00
Andrey Gusakov f6b5dd4088 ARM: shmobile: r8a7790: add MLB+ clock
Add MLB+ clock to R8A7790 device tree.

Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
[Sergei: rebased, renamed, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-23 09:18:16 +09:00
Zhang Rui 32c9edc4e3 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc 2014-12-21 22:49:12 +08:00
Shinobu Uehara deac150c2d ARM: shmobile: r8a7794: Add MMCIF clock to device tree
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
[horms: omitted device node; only add clock]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21 19:07:22 +09:00
Shinobu Uehara 8e181633e6 ARM: shmobile: r8a7794: Add SDHI clocks to device tree
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
[horms: omitted device nodes; only add clock]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21 19:07:22 +09:00
Koji Matsuoka c5d82c9996 ARM: shmobile: r8a7794: Add I2C clocks to device tree
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
[horms: omitted device nodes and aliases; only add clocks]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-12-21 19:07:21 +09:00
Hisashi Nakamura 3281480b70 ARM: shmobile: r8a7794: Add QSPI clock to device tree
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
[horms: omitted device node and alias; only add clock]
[horms: use clock-indicies instead of renesas,clock-indicies]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-12-21 19:07:20 +09:00
Hiroyuki Yokoyama be16cd385c ARM: shmobile: r8a7794: Add SYS-DMAC clocks to device tree
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[horms: resolved conflicts]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-12-21 19:07:19 +09:00
Ryo Kataoka ce85ad4788 ARM: shmobile: r8a7791: Add IPMMU-SGX clock to device tree
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
[horms: resolved conflicts]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21 19:07:18 +09:00
Ulrich Hecht 4452164e7b ARM: shmobile: sh73a0: Add CPG register bits header
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21 17:09:21 +09:00
Kazuya Mizuguchi 22a9b44fc1 ARM: shmobile: r8a7794: Add USBDMAC[01] clocks to device tree
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[horms: merged per-clock patches]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-12-21 16:57:18 +09:00
Shinobu Uehara c7bab9f929 ARM: shmobile: r8a7794: Add USB clocks to device tree
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
[horms: resolved conflicts]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-12-21 16:57:17 +09:00
Linus Torvalds bfc7249cc2 Please consider pulling the clk framework changes toward 3.19. It is
much later than usual due to several last minute bugs that had to be
 addressed. As usual the majority of changes are new drivers and
 modifications to existing drivers. The core recieved many fixes along
 with the groundwork for several large changes coming in the future which
 will better parition clock providers from clock consumers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUlMRQAAoJEDqPOy9afJhJgdUQAK4myJT0q10LSqe9piwzGVXg
 uDcIN5CTtbdYkvdGIfCjeqz3t+DClnAMPx2ZPIjC0Z1mIvqq+ViqwP5U8kKd7z1a
 WCKV8e5Et3O1WNbslzsx5Z2JYJNgzqr1xxWAOLTLh5rYxVwE5b946Yv4Whxa694I
 ugm4wNlibeN3H8pnyH8YEiWEtahtu7B5v/9WELpyREwNxw7ZA18MttEvWaamAPHG
 rAxhQCB3A3HaIvyg8KFdVmwOBZQMc2EWT00kJfdRWL4/iGAipKCnbuh1c8Pr/RQE
 XRg5Y+MuMLotoUELYYeZHtEmIlW3A+9gR6tLivswPpOP8/5BVUyA5Hh0yCGUqUHD
 s5Iheq7s7xnKEgIu9cD4tf1nCY41gw+4/I4pm47WLkaRgehcEBcAibVC3CupZ5pI
 hJiFqEKWPKEk8vAJ/mM+wCGI4w01+eoICBm4EG06Nwj4xkQcAVqE67ZvgVs1LrmL
 efqSxkWpNoetf0Q12cfePHmWtesGNdvljLdXQ54T4qH9HxNaI9/9eM6tyFTfrDSe
 BG5h7gbPr6/aM/1FfcWn5jQIfjEjPhQtSpCehs8pMf/pG5QZgftBtwe3p+yz7zXJ
 Q/v8xNEcZ7Ze6/9rJsAcbLzyzcdk9NzTlEMplzGBoUQFNiEXKoIjCDKAx39UFtMz
 EccWXvt9iNZZhmDcu0pU
 =jD84
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux

Pull clk framework updates from Mike Turquette:
 "This is much later than usual due to several last minute bugs that had
  to be addressed.  As usual the majority of changes are new drivers and
  modifications to existing drivers.  The core recieved many fixes along
  with the groundwork for several large changes coming in the future
  which will better parition clock providers from clock consumers"

* tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
  ARM: OMAP3: clock: fix boot breakage in legacy mode
  ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs
  clk: Really fix deadlock with mmap_sem
  clk: mmp: fix sparse non static symbol warning
  clk: Change clk_ops->determine_rate to return a clk_hw as the best parent
  clk: change clk_debugfs_add_file to take a struct clk_hw
  clk: Don't expose __clk_get_accuracy
  clk: Don't try to use a struct clk* after it could have been freed
  clk: Remove unused function __clk_get_prepare_count
  clk: samsung: Fix double add of syscore ops after driver rebind
  clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi
  clk: samsung: exynos4415: Fix build with PM_SLEEP disabled
  clk: samsung: remove unnecessary inclusion of header files from clk.h
  clk: samsung: remove unnecessary CONFIG_OF from clk.c
  clk: samsung: Spelling s/bwtween/between/
  clk: rockchip: Add support for the mmc clock phases using the framework
  clk: rockchip: add bindings for the mmc clocks
  clk: rockchip: rk3288 export i2s0_clkout for use in DT
  clk: rockchip: use clock ID for DMC (memory controller) on rk3288
  ...
2014-12-20 16:42:36 -08:00
Linus Torvalds 2efda9042d Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management update from Zhang Rui:
 "Summary:

   - of-thermal extension to allow drivers to register and use its
     functionality in a better way, without exploiting thermal core.
     From Lukasz Majewski.

   - Fix a bug in intel_soc_dts_thermal driver which calls a sleep
     function in interrupt handler.  From Maurice Petallo.

   - add a thermal UAPI header file for exporting the thermal generic
     netlink information to user-space.  From Florian Fainelli.

   - First round of refactoring in Exynos driver.  Bartlomiej and Lukasz
     are attempting to make it lean and easier to understand.

   - New thermal driver for Rockchip (rk3288), with support for DT
     thermal.  From Caesar Wang.

   - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with
     support for DT thermal.  From Mikko Perttunen.

   - New cooling device, based on common clock framework.  From Eduardo
     Valentin.

   - a couple of small fixes in thermal core framework.  From Srinivas
     Pandruvada, Javi Merino, Luis Henriques.

   - Dropping Armada A375-Z1 SoC thermal support as the chip is not in
     the market, armada folks decided to drop its support.

   - a couple of small fixes and cleanups in int340x thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits)
  thermal: provide an UAPI header file
  Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call
  thermal/powerclamp: add id for braswell cpu
  thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock
  Thermal: fix platform_no_drv_owner.cocci warnings
  Thermal/int340x: avoid unnecessary pointer casting
  thermal: int3403: Delete a check before thermal_zone_device_unregister()
  thermal/int3400: export uuids
  thermal: of: Extend current of-thermal.c code to allow setting emulated temp
  thermal: of: Extend of-thermal to export table of trip points
  thermal: of: Rename struct __thermal_trip to struct thermal_trip
  thermal: of: Extend of-thermal.c to provide check if trip point is valid
  thermal: of: Extend of-thermal.c to provide number of trip points
  thermal: Fix error path in thermal_init()
  thermal: lock the thermal zone when switching governors
  thermal: core: ignore invalid trip temperature
  thermal: armada: Remove support for A375-Z1 SoC
  thermal: rockchip: add driver for thermal
  dt-bindings: document Rockchip thermal
  thermal: exynos: remove exynos_tmu_data.h include
  ...
2014-12-17 10:16:27 -08:00
Linus Torvalds e7cf773d43 USB patches for 3.19-rc1
Here's the big set of USB and PHY patches for 3.19-rc1.
 
 The normal churn in the USB gadget area is in here, as well as xhci and
 other individual USB driver updates.  The PHY tree is also in here, as
 there were dependancies on the USB tree.
 
 All of these have been in linux-next.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOEHcACgkQMUfUDdst+ykziQCgsm1D/af2nac6CTF2pov8VMIY
 ywgAnRi8LtZ2WassrwTNxY86Avaqryis
 =UVp8
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...
2014-12-14 14:57:16 -08:00
Linus Torvalds 87c779baab Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
 "Main features this time are:

   - BAM v1.3.0 support form qcom bam dma
   - support for Allwinner sun8i dma
   - atmels eXtended DMA Controller driver
   - chancnt cleanup by Maxime
   - fixes spread over drivers"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits)
  dmaenegine: Delete a check before free_percpu()
  dmaengine: ioatdma: fix dma mapping errors
  dma: cppi41: add a delay while setting the TD bit
  dma: cppi41: wait longer for the HW to return the descriptor
  dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model
  dmaengine: fsl-edma: fix calculation of remaining bytes
  drivers/dma/pch_dma: declare pch_dma_id_table as static
  dmaengine: ste_dma40: fix error return code
  dma: imx-sdma: clarify about firmware not found error
  Documentation: devicetree: Fix Xilinx VDMA specification
  dmaengine: pl330: update author info
  dmaengine: clarify the issue_pending expectations
  dmaengine: at_xdmac: Add DMA_PRIVATE
  ARM: dts: at_xdmac: fix bad value of dma-cells in documentation
  dmaengine: at_xdmac: fix missing spin_unlock
  dmaengine: at_xdmac: fix a bug in transfer residue computation
  dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status()
  dmaengine: at_xdmac: remove chancnt affectation
  dmaengine: at_xdmac: prefer usage of readl/writel_relaxed
  dmaengine: xdmac: fix print warning on dma_addr_t variable
  ...
2014-12-12 14:59:53 -08:00
Linus Torvalds c0222ac086 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...
2014-12-11 17:56:37 -08:00
Linus Torvalds c1b30e4d94 Pin control changes for the v3.19 series:
- Force conversion of the ux500 pin control device trees
   and parsers to use the generic pin control bindings.
 - New driver and device tree bindings for the Qualcomm
   PMIC MPP pin controller and GPIO.
 - Some ACPI infrastructure for pin controllers.
 - New driver for the Intel CherryView/Braswell pin controller,
   the first Intel pin controller to fully take advantage of
   the pin control subsystem.
 - Support the Freescale i.MX VF610 variant.
 - Support the sunxi A80 variant.
 - Support the Samsung Exynos 4415 and Exynos 7 variants.
 - Split out Intel pin controllers to their own subdirectory.
 - A large slew of rockchip pin control updates, including
   suspend/resume support.
 - A large slew of Samsung Exynos pin controller updates.
 - Various minor updates and fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUhrHUAAoJEEEQszewGV1zPZsQAMzWjGKcZhyBDWyTsHM/E9nN
 csRIcVdXs+OggH0nr2YNm2AAh+nRlp4DAQCB7S83SLfKFHF4oWT8SlornEl7WKdN
 zcVUbV29LtHkotjtVoGQZmjuJx+uvHlWJt7moTKJsAMTeNyXv25jEp0LGETji24A
 xsIQ+Bp+G9IYZqK1dlJFPva1YMjjt9sBhJqKnOhh5Z+wjj3YdT7z5LW1x001GPju
 kwKumgxOL7qKjvyaI7n2z+9VhGu9zAvoxK2gLOgjgtFQODASLS/gk2oCuRi/fIpn
 RqE+YyfrNSeMKpOjZOXc/R0SRtOkhyvMBYbgQrAX04nio4pbT6x2XgclAe6v7O5Q
 T3GmOR2JZblwrzEPRs5mGBC9p7fd488ToHAPg5ojNH5F70hDkC8wSYYJZmaL+ORw
 umyxRlRjIbQ4vs6cZMlz/NksqpQyqCTMuBRLllo/jsSQlk0Vo3Gdci5J/T10lKd2
 ciX6AxlRKaRyRo+W6/i01xcX7SzzmNZoOCMXWSjsPv7Th+Gm7vIKyVeNOUkiqUXH
 1fVjw/M0AhIttVRbx1qTPsqFaDI/WPPk9EUvVm3W7DFuf0/w9B0HkZe6KpXdp33K
 GV6gEMvmTObvUpwYrYEi7hhKVl+cJ902ZMR/LSmK0QdADhI98pjsokDrigl+Jy93
 U1OepT70fw4mgJnqnevZ
 =sxpe
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:
 "Here is a stash of pin control changes I have collected for the v3.19
  series.  Mainly new hardware support, with Intels new embedded SoC as
  the especially interesting thing standing out, fully using the
  subsystem.

   - Force conversion of the ux500 pin control device trees and parsers
     to use the generic pin control bindings.
   - New driver and device tree bindings for the Qualcomm PMIC MPP pin
     controller and GPIO.
   - Some ACPI infrastructure for pin controllers.
   - New driver for the Intel CherryView/Braswell pin controller, the
     first Intel pin controller to fully take advantage of the pin
     control subsystem.
   - Support the Freescale i.MX VF610 variant.
   - Support the sunxi A80 variant.
   - Support the Samsung Exynos 4415 and Exynos 7 variants.
   - Split out Intel pin controllers to their own subdirectory.
   - A large slew of rockchip pin control updates, including
     suspend/resume support.
   - A large slew of Samsung Exynos pin controller updates.
   - Various minor updates and fixes"

* tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (49 commits)
  pinctrl: at91: enhance (debugfs) at91_gpio_dbg_show
  pinctrl: meson: add device tree bindings documentation
  gpio: tz1090: Fix error handling of irq_of_parse_and_map
  pinctrl: tz1090-pinctrl.txt: Fix typo in binding
  pinctrl: pinconf-generic: Declare dt_params/conf_items const
  pinctrl: exynos: Add support for Exynos4415
  pinctrl: exynos: Add initial driver data for Exynos7
  pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts
  pinctrl: exynos: Consolidate irq domain callbacks
  pinctrl: exynos: Generalize the eint16_31 demux code
  pinctrl: samsung: Separate per-bank init and runtime data
  pinctrl: samsung: Constify samsung_pin_ctrl struct
  pinctrl: samsung: Constify samsung_pin_bank_type struct
  pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct
  pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR()
  pinctrl: Add Intel Cherryview/Braswell pin controller support
  gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod()
  pinctrl: Fix path error in documentation
  pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
  pinctrl: rockchip: add suspend/resume functions
  ...
2014-12-11 10:43:14 -08:00
Punit Agrawal a940cb34fe thermal: Fix cdev registration with THERMAL_NO_LIMIT on 64bit
The size of unsigned long varies between 32 and 64 bit systems while
the size of phandle arguments is always 32 bits per parameter.

On 64-bit systems, cooling devices registered via of-thermal apis fail
to bind when the min/max cooling state is specified as
THERMAL_NO_LIMIT (-1UL) as there is a mis-match between the value read
from the device tree (32bit) and the pre-processor define (64bit).

As we're unlikely to need cooling states larger than 32 bits, and for
consistency with the size of phandle arguments, explicitly limit
THERMAL_NO_LIMIT to 32 bits.

Reported-by: Hyungwoo Yang <hwoo.yang@gmail.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-10 11:11:00 -04:00
Linus Torvalds 6da314122d ARM: SoC DT updates for 3.19
The DT branch adds a lot of new stuff for additional SoC and board
 support. The branch is the largest one and contains 513 out of the
 total 972 non-merge arm-soc changesets for 3.19.
 
 Most of the changes are about enabling additional on-chip devices for
 existing machines, but there are also an unusual number of new SoC
 types being added this time:
 
 * AMLogic Meson8
 * ARM Realview in DT mode
 * Allwinner A80
 * Broadcom BCM47081
 * Broadcom Cygnus
 * Freescale LS1021A
 * Freescale Vybrid 500 series
 * Mediatek MT6592, MT8127, MT8135
 * STMicroelectronics STiH410
 * Samsung Exynos4415
 
 The level of support for the above differs widely, some are just
 stubs with nothing more than CPU, memory and a UART, but others
 are fairly complete. As usual, these get extended over time.
 
 There are also many new boards getting added, this is the
 list of model strings that are showing up in new dts files:
 
 * ARM RealView PB1176
 * Altera SOCFPGA Arria 10
 * Asus RT-N18U (BCM47081)
 * Buffalo WZR-1750DHP (BCM4708)
 * Buffalo WZR-600DHP2 (BCM47081)
 * Cygnus Enterprise Phone (BCM911360_ENTPHN)
 * D-Link DIR-665
 * Google Spring
 * IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
 * IGEPv2 Rev. F (TI OMAP AM/DM37x)
 * LS1021A QDS Board
 * LS1021A TWR Board
 * LeMaker Banana Pi
 * MarsBoard RK3066
 * MediaTek MT8127 Moose Board
 * MediaTek MT8135 evaluation board
 * Mele M3
 * Merrii A80 Optimus Board
 * Netgear R6300 V2 (BCM4708)
 * Nomadik STN8815NHK
 * NovaTech OrionLXm
 * Olimex A20-OLinuXino-LIME2
 * Raspberry Pi Model B+
 * STiH410 B2120
 * Samsung Monk board
 * Samsung Rinato board
 * Synology DS213j
 * Synology DS414
 * TBS2910 Matrix ARM mini PC
 * TI AM5728 BeagleBoard-X15
 * Toradex Colibri VF50 on Colibri Evaluation Board
 * Zynq ZYBO Development Board
 
 Other notable changes include:
 
 * exynos: cleanup of existing dts files
 * mvebu: improved pinctrl support for Armada 370/XP
 * nomadik: restructuring dts files
 * omap: added CAN bus support
 * shmobile: added clock support for some SoCs
 * shmobile: added sound support for some SoCs
 * sirf: reset controller support
 * sunxi: continuing the relicensing under dual GPL/MIT
 * sunxi: lots of new on-chip device support
 * sunxi: working simplefb support (long awaited)
 * various: provide stdout-path property for earlycon
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVIcj3mCrR//JCVInAQL9Nw//YKK1l5gDZMmJ5nZXapXaZXERACN1n7H6
 9kkEZRF5ndUY4+MQmqYqHqBya04aQgnuHu0hsxbEAn2L3j2+ejZgc8XRqflArORy
 EXQvH/l6UNA11aCoLvKvT9fny76ZCOyEOALWXj9oLxhfd5X2d/So9q1ELFLgmc0S
 XnVMfpoXPeVPhe6l8EhF/qI0xYjM91CHWRopRQi6yp4DqFXV2+h5ggCpX1+S2e8L
 LyGNLk0RM9Mha+Qyy4O+LY+FoeWwDutQyat0ct9ov6FP8AYrR1N43d/ekJ57L8fU
 hVymo+5prUwEkIfQpsJQjPzonJxFssk1KD9t+GZ99VgEO02tvpjeB0nwoaWJxS25
 MzU2Bgp0Z/Yu0Q0SGu5/fuMya1Mo+wRA1OyQLp515TQqdWyTLcPT9o/ahfw8Uf1W
 6gBZoB+XXEQPI1sMHDDrn4r5T9mySsodAGfnvJoNxttnjCmVRzI5sXssnFji8TTF
 ciMEzfoTJNPqzxkzaOM13XmslKtFrI9A+DGgnOWn6oZXODzHcc6M+z/moiWy8b/e
 /HsbzWvp9HUPZVjM2AJR4iiyLXv7GRu9maNmGtoXKi9bnQDaNGWFovp/R5y8avQM
 xyzJ+6melNZnnoEue8/OOdum7jMeqPCRVQuqM2hKVcsmNEnb7kPBOi4AYXWTrTFO
 bcDvFylnmlA=
 =BHwA
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "The DT branch adds a lot of new stuff for additional SoC and board
  support.  The branch is the largest one and contains 513 out of the
  total 972 non-merge arm-soc changesets for 3.19.

  Most of the changes are about enabling additional on-chip devices for
  existing machines, but there are also an unusual number of new SoC
  types being added this time:

   - AMLogic Meson8
   - ARM Realview in DT mode
   - Allwinner A80
   - Broadcom BCM47081
   - Broadcom Cygnus
   - Freescale LS1021A
   - Freescale Vybrid 500 series
   - Mediatek MT6592, MT8127, MT8135
   - STMicroelectronics STiH410
   - Samsung Exynos4415

  The level of support for the above differs widely, some are just stubs
  with nothing more than CPU, memory and a UART, but others are fairly
  complete.  As usual, these get extended over time.

  There are also many new boards getting added, this is the list of
  model strings that are showing up in new dts files:

   - ARM RealView PB1176
   - Altera SOCFPGA Arria 10
   - Asus RT-N18U (BCM47081)
   - Buffalo WZR-1750DHP (BCM4708)
   - Buffalo WZR-600DHP2 (BCM47081)
   - Cygnus Enterprise Phone (BCM911360_ENTPHN)
   - D-Link DIR-665
   - Google Spring
   - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
   - IGEPv2 Rev. F (TI OMAP AM/DM37x)
   - LS1021A QDS Board
   - LS1021A TWR Board
   - LeMaker Banana Pi
   - MarsBoard RK3066
   - MediaTek MT8127 Moose Board
   - MediaTek MT8135 evaluation board
   - Mele M3
   - Merrii A80 Optimus Board
   - Netgear R6300 V2 (BCM4708)
   - Nomadik STN8815NHK
   - NovaTech OrionLXm
   - Olimex A20-OLinuXino-LIME2
   - Raspberry Pi Model B+
   - STiH410 B2120
   - Samsung Monk board
   - Samsung Rinato board
   - Synology DS213j
   - Synology DS414
   - TBS2910 Matrix ARM mini PC
   - TI AM5728 BeagleBoard-X15
   - Toradex Colibri VF50 on Colibri Evaluation Board
   - Zynq ZYBO Development Board

  Other notable changes include:

   - exynos: cleanup of existing dts files
   - mvebu: improved pinctrl support for Armada 370/XP
   - nomadik: restructuring dts files
   - omap: added CAN bus support
   - shmobile: added clock support for some SoCs
   - shmobile: added sound support for some SoCs
   - sirf: reset controller support
   - sunxi: continuing the relicensing under dual GPL/MIT
   - sunxi: lots of new on-chip device support
   - sunxi: working simplefb support (long awaited)
   - various: provide stdout-path property for earlycon"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits)
  ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured
  Revert "ARM: dts: rockchip: temporarily disable smp on rk3288"
  ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2
  ARM: BCM5301X: Add DT for Asus RT-N18U
  ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP
  ARM: BCM5301X: Add DT for Netgear R6300 V2
  ARM: BCM5301X: Add buttons for Netgear R6250
  ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard
  ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
  arm: dts: zynq: Add Digilent ZYBO board
  arm: dts: zynq: Move crystal freq. to board level
  doc: dt: vendor-prefixes: Add Digilent Inc
  Documentation: devicetree: Fix Xilinx VDMA specification
  ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188
  ARM: dts: rockchip: add label property for leds on Radxa Rock
  ARM: BCM5301X: Add LEDs for Netgear R6250 V1
  ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file
  ARM: dts: add sysreg phandle to i2c device nodes for exynos
  ARM: dts: Remove unused bootargs from exynos3250-rinato
  ARM: dts: add board dts file for Exynos3250-based Monk board
  ...
2014-12-09 14:57:37 -08:00
Linus Torvalds 3a647c1d7a ARM: SoC driver updates for 3.19
These are changes for drivers that are intimately tied to some SoC
 and for some reason could not get merged through the respective
 subsystem maintainer tree.
 
 The largest single change here this time around is the Tegra
 iommu/memory controller driver, which gets updated to the new
 iommu DT binding. More drivers like this are likely to follow
 for the following merge window, but we should be able to do
 those through the iommu maintainer.
 
 Other notable changes are:
 * reset controller drivers from the reset maintainer (socfpga, sti, berlin)
 * fixes for the keystone navigator driver merged last time
 * at91 rtc driver changes related to the at91 cleanups
 * ARM perf driver changes from Will Deacon
 * updates for the brcmstb_gisb driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVIcj4mCrR//JCVInAQIvWg//WD72+2q0RmEvu8r/YN4SDfg5iY7OMzgy
 Jyt6rN1IhXBY5GJL5Hil1q2JP/7o8vypekllohmBYWzXO3ZJ2VK6NPIXEMuzaiCz
 D9gmb+N6FdR2L2iYPv7B/3uOf55pHjBu525+vLspCTOgcWBrLgCnA9e9Yg462AEf
 VP3x+kV0AH25lovEi3mPrc2e46jnl0Mzp3f3PCkPqRSEMn7sxu9ipii+elxvArYp
 jYYCB03ZEBFa7T0e4HD38gnVLbC6dTj47AcSCWYP9WhxJ2RmCQKRBEnJre02hgar
 NPg8z+OrUACIAkvJHzg3WccmXdi0aqQ2JDsl46Tkl7pA6NdyMLfizT3OiZnMRmgc
 34H0ZSxclW+j25aI8OmDpv2ypZev+UAzkbRobcvF+aV/zJeAX88tPgcshfCUVZll
 ZIqO7oJB73nCl1XBLv2ZrLV2tcOox6jL/5LQt0WYA5Szg5upo7D1fZl8v5jXX7eJ
 C62ychuABs6hsmH5jEy+73kdpHbYft7dZfGZxdgq1AIOkdWoynCze/R7Vj24xoXR
 118cTNN9ZTPHmN5yxUvuGoqA3FWOqkJXaTS4W0hRD6OxOGTsTV4FIlRnD+K7feOW
 ng1yfIcvKR1Dx7tsySTHQK+bZGNnovA/ENPK6VDuhbwE62Lx7N5hcbsSIKKwRI9C
 D1m1fC+AIcQ=
 =MwMG
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  The largest single change here this time around is the Tegra
  iommu/memory controller driver, which gets updated to the new iommu DT
  binding.  More drivers like this are likely to follow for the
  following merge window, but we should be able to do those through the
  iommu maintainer.

  Other notable changes are:
   - reset controller drivers from the reset maintainer (socfpga, sti,
     berlin)
   - fixes for the keystone navigator driver merged last time
   - at91 rtc driver changes related to the at91 cleanups
   - ARM perf driver changes from Will Deacon
   - updates for the brcmstb_gisb driver"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
  clocksource: arch_timer: Fix code to use physical timers when requested
  memory: Add NVIDIA Tegra memory controller support
  bus: brcmstb_gisb: Add register offset tables for older chips
  bus: brcmstb_gisb: Look up register offsets in a table
  bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
  bus: brcmstb_gisb: Make the driver buildable on MIPS
  of: Add NVIDIA Tegra memory controller binding
  ARM: tegra: Move AHB Kconfig to drivers/amba
  amba: Add Kconfig file
  clk: tegra: Implement memory-controller clock
  serial: samsung: Fix serial config dependencies for exynos7
  bus: brcmstb_gisb: resolve section mismatch
  ARM: common: edma: edma_pm_resume may be unused
  ARM: common: edma: add suspend resume hook
  powerpc/iommu: Rename iommu_[un]map_sg functions
  rtc: at91sam9: add DT bindings documentation
  rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
  ARM: at91: add clk_lookup entry for RTT devices
  rtc: at91sam9: rework the Kconfig description
  ...
2014-12-09 14:48:22 -08:00
Linus Torvalds 6cd94d5e57 ARM: SoC platform changes for 3.19
New and updated SoC support, notable changes include:
 
 * bcm: brcmstb SMP support
 * bcm: initial iproc/cygnus support
 * exynos: Exynos4415 SoC support
 * exynos: PMU and suspend support for Exynos5420
 * exynos: PMU support for Exynos3250
 * exynos: pm related maintenance
 * imx: new LS1021A SoC support
 * imx: vybrid 610 global timer support
 * integrator: convert to using multiplatform configuration
 * mediatek: earlyprintk support for mt8127/mt8135
 * meson: meson8 soc and l2 cache controller support
 * mvebu: Armada 38x CPU hotplug support
 * mvebu: drop support for prerelease Armada 375 Z1 stepping
 * mvebu: extended suspend support, now works on Armada 370/XP
 * omap: hwmod related maintenance
 * omap: prcm cleanup
 * pxa: initial pxa27x DT handling
 * rockchip: SMP support for rk3288
 * rockchip: add cpu frequency scaling support
 * shmobile: r8a7740 power domain support
 * shmobile: various small restart, timer, pci apmu changes
 * sunxi: Allwinner A80 (sun9i) earlyprintk support
 * ux500: power domain support
 
 Overall, a significant chunk of changes, coming mostly from
 the usual suspects: omap, shmobile, samsung and mvebu, all of
 which already contain a lot of platform specific code in
 arch/arm.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVIcjyGCrR//JCVInAQJJCRAA1Tm+HZGiAiTvXEAcm/T9tIA08uqtawHt
 cqyEAUyrnE8QxE4EhUd2pTw4EunVusqKF5EsDxOzw7b3ukUdLAWZE7bqBOSIJLqn
 hrfsQQ8dXLbyC7T/CHPnBVeM+pn9LiIc9qzpZ0YToiMnHBBI4vKFQntBjd31yoRE
 hN08I6AmDjQolOzzlqR1fuM0uZaKiHIcytdauTt3Vfqgg7FTHcTy3u1kClHTR1Lp
 m/KuDothGpR5OKjSnUQz7EO5V3KJEnaKey8z2xM1a7DLLAvJ6r2+DUaDopv9Dbz1
 W/V3H7fi5tLvillVa8xmlmzqWZbPc1xw8MWqvHZSWIMRZqloAHpC1VWKn0ZuH4SW
 5Bj4ubSrpYjJxjKYfrxtjmuzru3A2jWBNTSP5A4nsny0C3AUsXkfRmRS0VNdegF8
 sUdQ1MF8vEMpQT3QPH88+ccFHeIgqbcayhKqLPf7r8q0kwlym5N7Y2amU2A/O6qz
 +324r+yzfSA70VgJZ5EhXxWVDOPB4Lc8EtoWnH6T/kjncIMwzEsbEbyB3X1OaREW
 pVn3PNo06VjHLYoiHX+8G99pOFR/JZvaQs6jGCXLs+Orjp5WfP+kafkWqcB5GAKU
 Pfd3AQsl6rKAITdu0XsTdPiICNS4CmBiWYPepQsTa3pQaNgB7fwZNQKelNRIdGc+
 dF1lnQ7CXLQ=
 =lFoH
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...
2014-12-09 14:38:28 -08:00
Zhang Rui 9c1e4550b5 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into eduardo-soc-thermal 2014-12-09 11:37:35 +08:00
Mark Brown 92d07a8ff6 Merge remote-tracking branches 'regulator/topic/max77686', 'regulator/topic/max77693', 'regulator/topic/max77802', 'regulator/topic/power-off' and 'regulator/topic/rk808' into regulator-next 2014-12-05 11:14:37 +00:00
Arnd Bergmann e58e501a9b ARM: tegra: IOMMU support for v3.19
This adds the driver pieces required for IOMMU support on Tegra30,
 Tegra114 and Tegra124.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUgHtUAAoJEN0jrNd/PrOhO4kQAKPK7g3zPOCzKNwMvtrMKL2M
 a0U3OQEV5GcJaM55EObi5FyGci/IKAOABPfkexuRiPQGOYOM6n854a5QCwitT4XX
 sHMWy+kbFi2lYNrsMMadw6Ho3ZalpVXLpg4bBEeUJMGo72BNi7zZ/hj+l15wnK3x
 /o5l1y4acD+9Jf7ka2omsXJYp85lBjfQDVn0wt3/eNCJo4FKihybkVcYAyG0yM7u
 Hb3MRjcSO2E0HCBCrms7A9sCCPHUokAHIfnEKu4KXHIyO6d89q9wBe+O01dGA33f
 TnFOJvfE0s3pr/uWTzVkx4zgQDfqauAKu6+c37Hv+xLMNgn+v+XtZupTqSOnRzN/
 MUPhZErIz3XqpmJVUbAH4H600c/wYckedlYYiyMqmZ2Xf/QkBhOwlym1jKoNuicT
 +R4I5MTIPO1lDAefLOQAqJYauAH2525bt8Pqvywh6CIuNrLJxcD8gIESOyMQsm6K
 22tUG+qh5GX2zKCY+QFCJQ5w2IjVVcO83r+iaXCQAIfuIx/cGzfLhosjKnnv7kmw
 D6qVQ57gFxHe9fUgj/oMPJnq5bfJorrI+0lS6i7Eq1nhV9bGU0JdGEM08CGxL4jZ
 BxyX/NK3JXg1oKMswMN5TMZ3iewRgJ08O7jYGtdriD/J5aLarjkdyMfq+DvM2Qxa
 0dWArfjSXd/2jcdCKpgb
 =R4je
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.19-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "ARM: tegra: IOMMU support for v3.19" from Thierry Reding:

This adds the driver pieces required for IOMMU support on Tegra30,
Tegra114 and Tegra124.

* tag 'tegra-for-3.19-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: Add NVIDIA Tegra memory controller support
  of: Add NVIDIA Tegra memory controller binding
  ARM: tegra: Move AHB Kconfig to drivers/amba
  amba: Add Kconfig file
  clk: tegra: Implement memory-controller clock
  powerpc/iommu: Rename iommu_[un]map_sg functions
  iommu: Improve error handling when setting bus iommu
  iommu: Do more input validation in iommu_map_sg()
  iommu: Add iommu_map_sg() function

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04 17:20:02 +01:00
Arnd Bergmann a8afa2645c Reset controller changes for v3.19
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUctX9AAoJEFDCiBxwnmDrYzQQANVqyYFY/VRMvS5pPuPuA51L
 K5NQRZ7AFpZCCyfYffiC8DfFHB4WibfXUUwT8ElJVFgRnzs7u3OmMX7rKbFR0QfY
 rtt1nhrG77SP+/rriE9uc+mHOBO0+pauEsRROqOJleqEWwO4jXUz/g6x/34IRcuC
 CFrLqz/bhmn7w9eTz27UnVwJSJMNvAVpnBIScSMClZFWtmNIF8pMgqjDqOc8XF2U
 2k7vMU0Af2BGkyKdrvqKcSOUoF16iC18rbuj6EBOHR87Ymd2s4gqZ5jcDv3kww7K
 /TVV9gIeS5zFXpK8obSMkvVsRhfZmJzbdRyj2tZQD8vh1KRA+Efiq5Jsq9m+iztN
 kyCpwnt3FX7KHgXlj/8m2aDOTd4HjT4x4661CMTHSbYDvRVxWkJS7eLcCKwt/F9Z
 o6lYw0AOiCC8tP21wK5xjxuYlbmnWKQIkIHE8JPZkRSw9bcGB4UgMsy0/4iHbUoW
 T9YtvAE2qSJOrER1xHRnl1dfFMhIHVX4XaOCbb3EnOSlSxQMmyzJJZUHwSUwdr1I
 IXxW+3Wc41Rqklv8PQbI0Gv6/hR+Tb8BMB8r0dq4qeCfdobFTEvtGuLa0KSeFXgy
 439aM2zSUIXAYOOEyG7GsUkgaMj1enQsj/azB6aJl5C6yWBdFcF5ZcTM0uTbwuKt
 Xcs/9Nu7BNTDo3UcPhBx
 =FuM7
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-3.19-2' of git://git.pengutronix.de/git/pza/linux into next/drivers

Pull "Reset controller changes for v3.19" from Philipp Zabel:

This adds a new driver for the sti soc family, and creates
a reset_control_status interface, which is added to the existing
drivers.

* tag 'reset-for-3.19-2' of git://git.pengutronix.de/git/pza/linux:
  reset: add socfpga_reset_status
  reset: sti: Document sti-picophyreset controllers bindings.
  reset: stih407: Add softreset, powerdown and picophy controllers
  reset: stih407: Add reset controllers DT bindings
  reset: add reset_control_status helper function

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04 16:57:36 +01:00
Thierry Reding 8918465163 memory: Add NVIDIA Tegra memory controller support
The memory controller on NVIDIA Tegra exposes various knobs that can be
used to tune the behaviour of the clients attached to it.

Currently this driver sets up the latency allowance registers to the HW
defaults. Eventually an API should be exported by this driver (via a
custom API or a generic subsystem) to allow clients to register latency
requirements.

This driver also registers an IOMMU (SMMU) that's implemented by the
memory controller. It is supported on Tegra30, Tegra114 and Tegra124
currently. Tegra20 has a GART instead.

The Tegra SMMU operates on memory clients and SWGROUPs. A memory client
is a unidirectional, special-purpose DMA master. A SWGROUP represents a
set of memory clients that form a logical functional unit corresponding
to a single device. Typically a device has two clients: one client for
read transactions and one client for write transactions, but there are
also devices that have only read clients, but many of them (such as the
display controllers).

Because there is no 1:1 relationship between memory clients and devices
the driver keeps a table of memory clients and the SWGROUPs that they
belong to per SoC. Note that this is an exception and due to the fact
that the SMMU is tightly integrated with the rest of the Tegra SoC. The
use of these tables is discouraged in drivers for generic IOMMU devices
such as the ARM SMMU because the same IOMMU could be used in any number
of SoCs and keeping such tables for each SoC would not scale.

Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04 16:11:47 +01:00
Greg Kroah-Hartman c00552ebaf Merge 3.18-rc7 into usb-next
We need the xhci fixes here and this resolves a merge issue with
drivers/usb/dwc3/ep0.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-30 19:21:03 -08:00
Michael Turquette b572b5f821 - clock phase setting capability for the rk3288 mmc clocks
- pll init to allow syncing to actual rate table values
 - some more exported clocks
 - fixes for some clocks (typos etc) all of them not yet used
   in actual drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJUd7jIAAoJEPOmecmc0R2BrOkIAJpMe0tqHxtcN1fBSS2rS3/b
 bgcu37WfGXt1FkBkGPyoVfy0m6tQ9hHx07o62IowVvaWzmvoQppLmC20+y6gKVMj
 nVGlhbfhZ3bDJBbsbWAyzQvH+fJx+pOTIGQJCCNX/aixSYnfvda/FP0u7EVrY4W/
 mF/b5mPmHhah9EeyuAwy4eAT5xCCER5DqR9eryObDwj3N9cUluM9BiK1JWXXWdYt
 i/p3NS+MEjFG2KrLB+Rzu39yFRsjF8IOBKuYNh752NVcsNy2CuxqbDSpn8NM2niW
 bxW07X5J8JSpecpuzJmkuOomauE+4pKXMM3W+XL+XO8iF3h9inXXp0nzX31cQRI=
 =st2A
 -----END PGP SIGNATURE-----

Merge tag 'v3.19-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

- clock phase setting capability for the rk3288 mmc clocks
- pll init to allow syncing to actual rate table values
- some more exported clocks
- fixes for some clocks (typos etc) all of them not yet used
  in actual drivers
2014-11-28 21:00:16 -08:00
Arnd Bergmann 6b7f0570b1 The i.MX device tree changes for 3.19:
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
    ADC etc.
  - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
  - Improve SSI clocks description for i.MX5 platforms
  - Add ENET2 support for imx6sx-sdb board
  - Add device tree source for LS1021A SoC, board QDS and TWR
  - Enable cpufreq support for i.MX53
  - Enable VPU device support for i.MX6QDL
  - Enable poweroff support for i.MX6 SoCs
  - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
  - Create generic base device trees for Vybrid and add support for
    Colibri VF50
 
 Note: the change set is built on top of imx-soc-3.19 to resolve the
 dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
 clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
 clock".
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUcZicAAoJEFBXWFqHsHzO0ooH/ie5r7JDjklD6IlAxD9UyDyp
 RQSF/8VYTc1EhECI5D/xmHARnUM5AxfMBQzFyavz/0hkGp22xJtBgp5ZlYtWwyAF
 qpLI031/5hn+37NyMxdcd6nU55e7GJw4loBXTZ5pNSRdP+ubsUVccfUdQ1K5hPA6
 KeS5vqaX26c5P2R+tkx2pfRLmCrSWNKNIpIbZzenlu2dS7U77ex1AO2W+ToDTgQ3
 asVIMD/7oQ4soEGZfSQdzHCftQ2OdVGlybFoMCkW5xrzRVfucbSN2BbLpEM5Z117
 /DZpfAmHlT4NrGz/BBzpK6l3AWFmXLmCP/dFvvfzKM3uWgr/zlVF8ChW/xgCc+g=
 =FnNq
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "The i.MX device tree changes for 3.19" from Shawn Guo:

 - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
   ADC etc.
 - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
 - Improve SSI clocks description for i.MX5 platforms
 - Add ENET2 support for imx6sx-sdb board
 - Add device tree source for LS1021A SoC, board QDS and TWR
 - Enable cpufreq support for i.MX53
 - Enable VPU device support for i.MX6QDL
 - Enable poweroff support for i.MX6 SoCs
 - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
 - Create generic base device trees for Vybrid and add support for
   Colibri VF50

Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".

* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
  ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
  ARM: dts: imx6: add pm_power_off support for i.mx6 chips
  ARM: dts: vf-colibri: add USB regulators
  ARM: dts: imx6: phyFLEX: Add CAN support
  ARM: dts: imx6: phyFLEX: Add PCIe
  ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
  ARM: dts: imx6: phyFLEX: Enable gpmi in module file
  ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
  ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
  ARM: dts: vf-colibri: Add I2C support
  ARM: dts: imx6qdl: Enable CODA960 VPU
  ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
  ARM: dts: vf610: enable USB misc/phy nodes where necessary
  ARM: dts: vf610: use new GPIO support
  ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
  ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
  ARM: dts: vf500-colibri: add Colibri VF50 support
  ARM: dts: vf610: create generic base device trees
  ARM: dts: vf610: assign oscillator to clock module
  dt-bindings: arm: add Freescale LS1021A SoC device tree binding
  ...

Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-11-28 15:01:57 +01:00
Arnd Bergmann 32e049ad79 The i.MX SoC update for 3.19:
- Update i.MX6 suspend code to check DDR instead of CPU type, as the
    difference we need to handle is between LPDDR2 and DDR3, not SoCs.
  - Set anatop properly for LPDDR2 in DSM mode
  - Add support for new SoC LS1021A which integrates dual Cortex-A7
  - Add ENET initialization for i.MX6SX platform
  - Add cpufreq support for i.MX53 platform
  - Add a SNVS based poweroff driver for i.MX6 platforms
  - Use ARM  Global Timer as clocksource on VF610
 
 Note: the change set is built on top of tag imx-fixes-3.18-2 to resolve
 a conflict on file arch/arm/mach-imx/clk-vf610.c.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUcYdSAAoJEFBXWFqHsHzObr4H/RpZ9BlKLonp/HEcdsbCj+Yt
 FvEcLS2V1UaHK1o8Gk93pdXHentxWlXYOunSE068xIetgrZi5wVimvV2q14WQZh6
 KlRTYgMiPvQmewoaL0QnLaYECqhAoD89PGTQbgLatn8tihzCKKbbnNR6KA+n8qQm
 0xpAcm3xckHdvCvr7t4C/lDgkww0Xd4XxMnmuSR9QxdW9doESZfk0emfm7sYd1gx
 GW+WAnD0vcMkaPwsCSklI9aaaDE+yELhyu/acocrKIjPPEco6mBFE8Afiwija+pO
 NWDegpEqru4IT9/rpTTc5eygKHfVVhSCS1cd+P9e8Ea3d9q3Q/AV/95WiBVJiGg=
 =AZMX
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "The i.MX SoC update for 3.19" from Shawn Guo

 - Update i.MX6 suspend code to check DDR instead of CPU type, as the
   difference we need to handle is between LPDDR2 and DDR3, not SoCs.
 - Set anatop properly for LPDDR2 in DSM mode
 - Add support for new SoC LS1021A which integrates dual Cortex-A7
 - Add ENET initialization for i.MX6SX platform
 - Add cpufreq support for i.MX53 platform
 - Add a SNVS based poweroff driver for i.MX6 platforms
 - Use ARM  Global Timer as clocksource on VF610

Note: the change set is built on top of tag imx-fixes-3.18-2 to resolve
a conflict on file arch/arm/mach-imx/clk-vf610.c.

* tag 'imx-soc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ARM: imx: clk-vf610: get input clocks from assigned clocks
  ARM: imx: Add Freescale LS1021A SMP support
  ARM: imx: Add initial support for Freescale LS1021A
  ARM: imx53: add cpufreq support
  ARM: imx53: clk: add ARM clock
  ARM: imx: add CPU clock type
  ARM: imx5: add step clock, used when reprogramming PLL1
  ARM: imx: add enet init for i.mx6sx
  ARM: imx6sx: add imx6sx iomux-gpr field define
  ARM: vf610: Add ARM Global Timer clocksource option
  ARM: imx: add anatop settings for LPDDR2 when enter DSM mode
  ARM: imx: replace cpu type check with ddr type check
  ARM: imx: Fix the removal of CONFIG_SPI option
  ARM: imx: clk-vf610: define PLL's clock tree

Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-11-28 14:59:53 +01:00
Alexandru M Stan c1c9f2cced clk: rockchip: add bindings for the mmc clocks
These clocks represent the physical clocks (including phases) and they will
later be used for clock phase tuning.

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-28 00:40:53 +01:00
Sonny Rao 6d288b169b clk: rockchip: rk3288 export i2s0_clkout for use in DT
This exposes the clock that comes out of the i2s block which generally
goes to the audio codec.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
[removed CLK_SET_RATE_PARENT from original patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-28 00:37:47 +01:00
Mark Brown cf2394f70c Linux 3.18-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUX/DqAAoJEHm+PkMAQRiGLtQH/iAt3fRHlYDXjaJian/KG1Cb
 wVP0I+HWZmvVmmd0PzyaxCZLgRNwdmmYHEH4QLy2JwZ3jZfFHlxhy+hDWCgz+67t
 bIzkLs0Pf1T4kJ2+r8qW2kBEz9PWJHGTQw7NTqZ++Ts3rPptBA6Fg4mEJ6fQigXy
 qRIY68DpipUkXV9BWBWijnTmrvP5tt7JtPzBr4DC8frMjvWct8+XwYhc2k2tEv2j
 LwLYb1OW6PUpPv2BQBfWjqqH77vYNQVhJwuwGcDe2YZdI0UFkDheL24+RbbPcZ4f
 OnrLjJSSgzv6lBWkAaXZK7/WJ/JZbXxEqHzWZQ3xXoQov97bm7lEYJqqi5gDasQ=
 =6Qpa
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rc4' into regulator-max77802

Linux 3.18-rc4
2014-11-26 20:37:57 +00:00
Jeff Chen 1ae2b01658 clk: rockchip: add binding ID for DMC (memory controller) clocks on rk3288
The DMC clocks need to be turned off at runtime, so we should have IDs
so we can export them.

Signed-off-by: Jeff Chen <cym@rock-chips.com>
[dianders: split into two patches; adjusted commit msg]
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-26 18:32:22 +01:00
Thierry Reding 4f4f85fa0b clk: tegra: Implement memory-controller clock
The memory controller clock runs either at half or the same frequency as
the EMC clock.

Reviewed-By: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26 09:43:23 +01:00
Gregory CLEMENT eee47538ec phy: add support for USB cluster on the Armada 375 SoC
The Armada 375 SoC comes with an USB2 host and device controller and
an USB3 controller. The USB cluster control register allows to manage
common features of both USB controllers.

This commit adds a driver integrated in the generic PHY framework to
control this USB cluster feature.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[ kishon@ti.com : Made it to use the updated devm_phy_create API and
		  soem cosmentic changes in Kconfig file.]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26 11:07:14 +05:30
Linus Torvalds a7e90924e1 The fixes for the clock framework are all regressions in drivers, plus a
single fix in one of the basic clock templates. No fixes to the core
 this time around. As with most clock driver fixes these run the gamut
 from fixing a build warning to fixing wrecked memory timings, with a
 little USB tossed in for fun. Please consider pulling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUcrkwAAoJEDqPOy9afJhJzq4P/jT9K+g0ljQrY93t97Wm6s4x
 Xi+RrVO/MOUhpIGzqrhPflGALl5Yj96iBUiC2QSVpVjDUdoQL5tc8c3FtQDGA7fA
 Q/9e2yUmjQ+nNxizdeIzaNUHO+fIe8FEn3NwyondfaDlI1sqVv/0WAf6MNkuLCwM
 /DJ1MmJbwgK255gI3FwUhbNylCCPeUENKRs3xGW3p4+fFIZGyROhBsJClE1nUiT1
 EFzWM6Bq29qOLxZ4Dqkfzz1BWLiqcTlRcf8ZaHjME77k09ybwNS9cmXrB9gHhmlL
 sMfDa0uwsv/mFWRohP5jK3AUqqtR7EgcPL5euO+d9Q+nBVofgTwxyvA0nlGqX8XQ
 hm1OZeolnWHPPHasRkgzSnd/0b/A8s+tr96XSvHjIlrx1ioWQD2K7GU82/3bObTL
 isqzW34+Y0dX2GpgwJu2eWrSwHk705wBA0t8/pP+r7aWdUsyX4J1ElGHLElzTLI0
 VkQZPwKvjVNd0kQRplZ/KPQoboDuFh8b09+MvG8Kz8t3Ilt0MS7rFrxEQ6xIBfe9
 M49vUJw2egmOCgcWp3GeyICIQJCfet2acyZy+vJivpu0//ssD7BT/woR7qmgHic1
 kmiVdj1iBSoUK4NIr+DvsNmMMDEW58CSK/j11chitT8WCRGYKW849iUk7LiGhXU0
 IgTphTfMdFF1a2gzqaQo
 =4O2k
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux

Pull clock fixes from Mike Turquette:
 "The fixes for the clock framework are all regressions in drivers, plus
  a single fix in one of the basic clock templates.  No fixes to the
  core this time around.

  As with most clock driver fixes these run the gamut from fixing a
  build warning to fixing wrecked memory timings, with a little USB
  tossed in for fun"

* tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux:
  clk: pxa: fix pxa27x CCCR bit usage
  clk-divider: Fix READ_ONLY when divider > 1
  clk: qcom: Fix duplicate rbcpr clock name
  clk: at91: usb: fix at91sam9x5 recalc, round and set rate
  clk: at91: usb: fix at91rm9200 round and set rate
2014-11-25 17:52:56 -08:00
Michael Turquette da57b46010 Merge branch 'clk-fixes' into clk-next 2014-11-24 17:45:33 -08:00
Andrew Bresticker 2ff404005e of: Add binding document for MIPS GIC
The Global Interrupt Controller (GIC) present on certain MIPS systems
can be used to route external interrupts to individual VPEs and CPU
interrupt vectors.  It also supports a timer and software-generated
interrupts.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8420/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24 07:45:30 +01:00
Lucas Stach 82a40b5482 ARM: imx53: clk: add ARM clock
The ARM clock is a virtual clock feeding the ARM partition of
the SoC. It controls multiple other clocks to ensure the right
sequencing when cpufreq changes the CPU clock rate.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-11-23 14:56:20 +08:00
Lucas Stach 6f0628aa9f ARM: imx5: add step clock, used when reprogramming PLL1
This is the bypass clock used to feed the ARM partition
while we reprogram PLL1 to another rate.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-11-23 14:56:19 +08:00
Arnd Bergmann 5ba3c24ca0 Second Round of Renesas ARM Based SoC DT Updates for v3.19
* Add labels for LEDs on kzm9g-reference and koelsch
 * Add Sound support to r8a7790/lager and r8a7791/koelsch
 * Add IIC DMA nodes to r8a7790 and r8a7791
 * Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
 * Add SGX, MMP and VSP1 clocks to r8a7794
 * Add USBDMAC{0,1} clocks to r8a7790 and r8a7791
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUbbZkAAoJENfPZGlqN0++A0gQAJ5bs24c0fRzIPXrkeIzY0aQ
 262nBv175LG8wihixOAJB/jiTPSpaZavlR+iXYq2iU+IqkkwIzFtdNs4q/ZMdppW
 J7LPUj0DwJe6+B8AYhSsSDDNW0P4avBXfU4rFXzLp2IkAqi/HdxJjB3/9C5Nzi7b
 mpsTvz3x4iP2NZdEKIDGtMBwtjghsfKBRaLsgNow+JdxLDLuWKWjaR8PMxvF1LFa
 Z/jz343PmFGCaWypq5HVyu+h3eNvh9HpOUleurGijXzoZl61U1SDceTygfbF+Ht2
 nNq8gqynokYWfmDQa8HJlPEmeCFhDtBHc9NNPJBEOCv7pWWdsXgfEYW5OepH+xzp
 FqfXM2DwKVMDcSL3LDwXYT1xZQfI8KUDg6ek5gXk8pDDpVhAb2ishEt+Vr3zEL+H
 uro9wruHl8lYujq9P4Jmh9icl2fMx3hXIoq3PVkzOkmJhViwSm55pqlAAVN72d4u
 xIthmwmvQ/zsvn5RwV3jmWUlwlYJmMz2gXqtsq+9NUy55yUMqjeSB9kchTzrM6SJ
 CzfiCl5j2SC6jiCNGsiFjI603kdIKq0uvaLQStEAHoWJkuf+jEWmfjV9qPptE+sa
 rPhIhWUXqs5Emw3DgQynIOy+szTWlg1hJl9MDF/SaeiyZ/dh/teqIoYhAjfqlCFS
 7etGw24D7YujpG9jlfC4
 =0cH9
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:

* Add labels for LEDs on kzm9g-reference and koelsch
* Add Sound support to r8a7790/lager and r8a7791/koelsch
* Add IIC DMA nodes to r8a7790 and r8a7791
* Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
* Add SGX, MMP and VSP1 clocks to r8a7794
* Add USBDMAC{0,1} clocks to r8a7790 and r8a7791

* tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree
  ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree
  ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree
  ARM: shmobile: r8a7794: Add SGX clock to device tree
  ARM: shmobile: koelsch: add Volume Ramp usage on comment
  ARM: shmobile: lager: add Volume Ramp usage on comment
  ARM: shmobile: r8a7791: add DMA nodes for IIC
  ARM: shmobile: r8a7790: add DMA nodes for IIC
  ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs
  ARM: shmobile: koelsch dts: Add labels for the LEDs
  ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
  ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
  ARM: shmobile: koelsch: Sound DMA support via DVC on DTS
  ARM: shmobile: koelsch: Sound DMA support via SRC on DTS
  ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS
  ARM: shmobile: koelsch: Sound DMA support on DTS
  ARM: shmobile: koelsch: Sound PIO support on DTS
  ARM: shmobile: koelsch: fixup I2C2 clock frequency
  ARM: shmobile: lager: Sound DMA support via DVC on DTS
  ARM: shmobile: lager: Sound DMA support via SRC on DTS
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 13:02:08 +01:00
Arnd Bergmann ec498f8e51 STi DT updates for v3.19, round 2.
Highlights:
 -----------
  - Refactor STiH407 SoC and board to add STiH410 SoC support
  - Add USB support to STiH416 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUazyhAAoJEMo4jShGhw+JtnUP/0qx5OjJXDAdoycX1MSxf8KK
 VtnQkT2ydQ1HryfQyd/1QE0lBUpjlMVRxEd7TPcLa3nDlytwAQn9ZZLnFyPTme+q
 WiXe49/Qf2q/glOcL+5ic5rG69Bn2MlQCJEL8Z+WRaUG6QsuNoIOUQb4w05zyXjS
 QeTwV/gSLs4F1rdF+yPSzF/MW9w7fbrdULl+e6gil9nggnBVrUZtMS/dp7BA5KEd
 1sXozEyMP+2tJIt02ZOYZBWnGIigayI2P+Rvf7fi1YtYRCpycIe7hoggx1HRYldg
 kxQspPFcNz1xplqDiTSSbYHJhXIuk9+PGPg2dxKaqA++7kDwauj8SsZARPQjBzNS
 moM4fkK8s6L0KnzdpZmfncWitN0upfI0J8MLmRCbkIY0mC95HoCOI+pycICq/26a
 nIxCCamcWGhsbVht7WDeJ/86c/qLGNlI6e4hWyNkiFUoukD1Uy1qpaCDl6HrpF4h
 15+gh4APc1JoRcWKHr0hCbG0Shtg69G2qNS1DPp7XFAKsbg7BC3e2NUzhgskLa3r
 S2AVxijW0kEIvLNHf1KZuBWJ5L9bc3Dlloqfz4zcQiAanzKXjPeZrduwOFMCpjK4
 zVFhsrMH7PKsEx100RXP/fk1L+pwR9fyBU8QMWR5VIt0ND4KxwrrziY3AUaVrXNJ
 gREWQhfD4toJ44A7WuqL
 =w34C
 -----END PGP SIGNATURE-----

Merge tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt

Pull "STi DT updates for v3.19, round 2" from Maxime Coquelin:

Highlights:
-----------
 - Refactor STiH407 SoC and board to add STiH410 SoC support
 - Add USB support to STiH416 SoC

* tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000
  ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs
  ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support.
  ARM: STi: DT: STih407: Abstract common dt nodes into shared files.
  ARM: STi: DT: STiH410: Add pinctl config for usb controllers.
  ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks
  ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.
  ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy
  ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20 17:36:23 +01:00
Mikko Perttunen 0199e9938f of: Add bindings for nvidia,tegra124-soctherm
This adds binding documentation and headers for the Tegra124
SOCTHERM device tree node.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-20 10:43:17 -04:00
Arnd Bergmann 8ef74e5d39 Renesas ARM Based SoC DT Updates for v3.19
* Add Add SoC-specific SATA compatible property to r8a7779
 * Enable DMA for MMCIF on r8a7791 and r8a7790
 * Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790
 * Enable TMU timer via DT on r8a7778
 * Enable CMT timer via DT on r8a73a4
 * Add MMP and {SR}GX clocks to  r8a7791 and r8a7790
 * Correct scifa2 clock index on r8a7740
 * Add missing INTCA for irqpin on r8a7740
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUWBh9AAoJENfPZGlqN0++zjwP/RxjS7wnDQvGqw2d3GSKp0I3
 Es/C4Ssm8kDYlgY1cQqeI/KK05vLEp5998YGy2kaVlTUSCj6UMO4UJ4t6yZgBeGA
 Nh4V70I475zlmxBjF4ZePD5+o/lyTbw+2GxHKFRsnxXqEr3E9QDNCgAc7kPevJl3
 U9T6B63VP3jOxJVzhfSNeFKYgmg4YgLW0aCsnZoW9mlS0phFZPO236JHdvFH8QQj
 FBjcdkkQjncBUTvLB54ASRk6wTWnEQ9WFGIGHDNYM11bypLndbKFxziofkKnex0B
 Pw6r9nY5jsKVkye68PsL5abKnyJQ87assacGEm6SuO/Sp8fR9ixt1+VWvLFfybcr
 sNYs1996kXghKvYbTZOFSGiH9e5BL/rwwepE/XkPbTvI1CeFIs3LQtXLfwfKmf/p
 +gIFT7ouY3GHtCivSSBz0iB8Z4pUNaurLmYkIsvUzsbccOMUcq8F4HL8RXWyBwG9
 FK0fwRCXP5zwI9rMePnGcLhR2LXB1n3yDfbfr7ZOd3Vw9rk3s9fj2czpJJMB4Dtz
 Nd4W5EedW6SrqzCMND1ZoE0T48zRooRWsgMv5AEES4epSDhuDLO1cQpkqca7fbfQ
 7rQmJpS8YEvXstbJWh44jZxWdN+W0TPydv2MrpPorB6KAueSTF259Z7zFoo4+S5f
 EPflJfAS+yMLDnl2ARaC
 =78IM
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:

* Add Add SoC-specific SATA compatible property to r8a7779
* Enable DMA for MMCIF on r8a7791 and r8a7790
* Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790
* Enable TMU timer via DT on r8a7778
* Enable CMT timer via DT on r8a73a4
* Add MMP and {SR}GX clocks to  r8a7791 and r8a7790
* Correct scifa2 clock index on r8a7740
* Add missing INTCA for irqpin on r8a7740

* tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
  ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node
  ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes
  ARM: shmobile: r8a7791: Add MMCIF0 DT node
  ARM: shmobile: r8a7790: Rename mmcif node to mmc
  ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property
  ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property
  ARM: shmobile: henninger: enable HS-USB
  ARM: shmobile: koelsch: enable HS-USB
  ARM: shmobile: r8a7791: add HS-USB device node
  ARM: shmobile: lager: enable HS-USB
  ARM: shmobile: r8a7790: add HS-USB device node
  ARM: shmobile: r8a7791: add USB3.0 device node
  ARM: shmobile: lager: enable USB3.0
  ARM: shmobile: r8a7790: add USB3.0 device node
  ARM: shmobile: r8a7794: Add arch_timer to device tree
  ARM: shmobile: bockw-reference: Initialise TMU device using DT
  ARM: shmobile: r8a7778: Add TMU nodes
  ARM: shmobile: armadillo800eva dts: Enable TMU0
  ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 22:45:33 +01:00
Michael Turquette 3c7f4fe810 Merge branch 'for-v3.19/exynos-clk' of git://linuxtv.org/snawrocki/samsung into clk-next-exynos 2014-11-19 11:41:21 -08:00
Yoshifumi Hosoya dc3cf93d89 ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19 09:22:12 +09:00
Kouei Abe 3e58a5424c ARM: shmobile: r8a7794: Add SGX clock to device tree
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19 09:22:12 +09:00
Peter Griffin cc149f7ae2 ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks
Although most clock outputs are the same as stih407 SoC, stih410
also has some additional new clock outputs.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18 12:54:55 +01:00
Georgi Djakov 9a6cb70f40 clk: qcom: Fix duplicate rbcpr clock name
There is a duplication in a clock name for apq8084 platform that causes
the following warning: "RBCPR_CLK_SRC" redefined

Resolve this by adding a MMSS_ prefix to this clock and making its name
coherent with msm8974 platform.

Fixes: 2b46cd23a5 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support")
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-17 10:40:42 -08:00
Olof Johansson f7efdad025 Few omap fixes for hangs and wrong pinctrl defines, and update
MAINTAINERS file to avoid missing PMIC and SoC related patches:
 
 - Fix random hangs on am437x because of incorrect default
   value for the DDR regulator
 
 - Fix wrong partition name for NAND on am335x-evm
 
 - Fix wrong pinctrl defines for dra7xx
 
 - Update maintainers entries for PMICs and SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUYj1ZAAoJEBvUPslcq6VzpBEQAL12JZOSxU7WP5gTaKmTTBi9
 YVIlE0yM8gkkfbyAqZLZDrssjjRPE696ys6aB+WdhuxasyIH5uhn9UHjWW/4UflG
 8rEazQJBC/gqv8DqBUDGz/c3EiKOPmHt6XUNeFxeDHgRrOVh1ivpxNOGKGnJOMmi
 UNpSBejWUO7O8vR2mDgnDeSTgmIC6yq5Wm7JDaWwuh9iyCmzD2z0+AYF8tf6vrDf
 LubKHXfdatNjAj5NCyJQsJtfr9iS57o3YIsqOS43KvGIYDLVQhzbezQjGtkAavUR
 HNZcVDbmK3ohIsPT6CuzPIbAg+l0YL/8lRytSaFjmMN6b2TPV6NKeijIK85GUYvN
 aR/8nFnZSJNaG8F7NAPuA6qxq4d0m6oPC3q2PLX9P1RQNP+ch/DrQarK4AMMMpV6
 C8sUDvhWYH7Lsa/xVomKo/0pTNc+K11xdVpxxdEridYLsCxR1UE7yr2P8tM0gq2F
 yb14rsw9kgH89n8sIUZRgC3eM5dUhL4pidx8kiBvkqbDZc90C+Oclj52EEnKiA96
 6BXSVAFaXU9+A9Q/EKXCqeJjLZX4GXbG8oe4n1uGePiS6hxpbHt3nhxvdOjDFYgc
 69jlVkKY1M0mG1JfVKl/eYn/HYHs9a84BI1Lra4zmdmSl55/kD1Q1OFCkBi8rZQ0
 5FFumJMQ1AVrQ6oOvIPM
 =YQGC
 -----END PGP SIGNATURE-----

Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.18-rc4" from Tony Lindgren:

Few omap fixes for hangs and wrong pinctrl defines, and update
MAINTAINERS file to avoid missing PMIC and SoC related patches:

- Fix random hangs on am437x because of incorrect default
  value for the DDR regulator

- Fix wrong partition name for NAND on am335x-evm

- Fix wrong pinctrl defines for dra7xx

- Update maintainers entries for PMICs and SoCs

* tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-16 15:09:53 -08:00
Chao Xie 1ec770d92a clk: mmp: add mmp2 DT support for clock driver
It adds the DT support for mmp2 clock subsystem.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-12 16:34:22 -08:00
Chao Xie 2bc61da9f7 clk: mmp: add pxa910 DT support for clock driver
It adds the DT support for pxa910 clock subsystem.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-12 16:34:18 -08:00
Chao Xie ab08aefcd1 clk: mmp: add pxa168 DT support for clock driver
It adds the DT support for pxa168 clock subsystem.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-12 16:34:14 -08:00
Gabriel FERNANDEZ 2fbbc96d16 phy: Add PHY header file for DT x Driver defines
This provides the shared header file which will be reference from both
PHY driver and its associated Device Tree node(s).

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
2014-11-11 15:53:25 +05:30
Roger Quadros 73b3a6657a pinctrl: dra: dt-bindings: Fix output pull up/down
For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the
PULL_DIS bit which disables the PULLs.

PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't
use it in the PIN_OUTPUT_PULLUP/DOWN macros.

Fixes: 23d9cec07c ("pinctrl: dra: dt-bindings: Fix pull enable/disable")

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10 14:29:20 -08:00
Kuninori Morimoto 8994fff677 ARM: shmobile: r8a7791: Add Audio DMAC devices to DT
Instantiate the two Audio DMA controllers in the r8a7791 device tree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: corrected spelling of audmac1]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10 10:08:10 +09:00
Kuninori Morimoto ba3240beae ARM: shmobile: r8a7790: Add Audio DMAC devices to DT
Instantiate the two Audio DMA controllers in the r8a7790 device tree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: corrected spelling of audmac1]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10 10:07:37 +09:00
Olof Johansson 1749e1fc9e STi DT updates for v3.19, round 1.
Highlights:
 -----------
  - Add SDHCI support for STiH41x B2020 boards
  - Add reset controllers to STiH407 SoC
  - Add MiPHY & SATA support to STiH416
  - Add Thermal supportto STiH416
  - Add Clock support to STiH407 SoC
 
 This tag also includes STiH407 bindings definitions for reset controller.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUU24fAAoJEMo4jShGhw+J8AMP/ii1CVgJZkaimGllZlO6kOwj
 tB6tZ3n8EGoC7P4UismVzmKqqGCkLGChzlUzvJMqSjE8kmmtwYPODxUy6nRZ5Gii
 S9PGAmJ8vRqEyG/8y83Y1OGnV7WBzVQfHnwFr0JvrFvCYyiHnpbUlxIKkA85F+JG
 Hnd+HKqOymhwY8eSN8nH/slrFkCYAEaGLoVV7tZWtr0p6gQYA7rP7XkFOXs1Ln5G
 iA8wtTDaPIyRH7X5/WeESjhkBMP8YcmslLUtaagIrORcQWC+TYNSFwWkciyFothd
 sz0szIO0/j9uLgxdKLnHxAU8mwx1in0ZNDaC+WlKtSE7V39C2PhaSmJ9sL+0Dxu3
 2HSoUPBgEJ0Zu5U7xSNgYQZrfANGx059B00J2OqDJfLshyDmpJrbJZtsQTW6Qz6N
 c8fGebGTXHHkLvjRHfh6LXRN30CpJc6m+mmwybhROnYyXdv7htv2q2V340GoG2mI
 6l5JY46g91KrSjEf91//qXLBvesoRVAPS9g2wKBjiePIl1nzdjZOfZ0vpw+vn1PV
 t9DUk1S2OuzeMdqSIt6XsjJQQcTL8npx2V+88ibo5BkAlOdLcCSOUuTzAHEBZtwB
 GJVTXog3TX3SoDmCc/guUAN7gzto3LBAz9GwcIuC28tkF0UufUX3v6wU+yz1+l00
 vLV6A2aJwUAZ3rRbQI2b
 =YmAW
 -----END PGP SIGNATURE-----

Merge tag 'sti-dt-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt

Merge "STi DT updates for v3.19, round 1" from Maxime Coquelin:

Highlights:
-----------
 - Add SDHCI support for STiH41x B2020 boards
 - Add reset controllers to STiH407 SoC
 - Add MiPHY & SATA support to STiH416
 - Add Thermal supportto STiH416
 - Add Clock support to STiH407 SoC

This tag also includes STiH407 bindings definitions for reset controller.

* tag 'sti-dt-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: DT: STiH407: Fix: clk-tmds-hdmi clock is missing
  ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocks
  ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0
  ARM: DT: STi: STiH416: Add DT node for ST's SATA device
  ARM: DT: STi: STiH416: Add DT node for MiPHY365x
  ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes
  ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards.
  ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs
  ARM: STi: DT: Add sdhci controller for stih415
  ARM: STi: DT: Add sdhci pin configuration for stih415
  ARM: STi: DT: Add sdhci controller for stih416
  ARM: STi: DT: Add sdhci pins for stih416
  ARM: sti: Add STiH407 reset controller support.
  ARM: sti: Add STiH407 Kconfig entry to select STIH407_RESET
  ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase
  reset: stih407: Add reset controllers DT bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-08 16:39:12 -08:00
Ludovic Desroches e1f7c9eee7 dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver
New atmel DMA controller known as XDMAC, introduced with SAMA5D4
devices.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06 11:00:08 +05:30
Stefan Agner c72c553249 ARM: imx: clk-vf610: define PLL's clock tree
So far, the required PLL's (PLL1/PLL2/PLL5) have been initialized
by boot loader and the kernel code defined fixed rates according
to those default configurations. Beginning with the USB PLL7 the
code started to initialize the PLL's itself (using imx_clk_pllv3).

However, since commit dc4805c2e7
(ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver)
imx_clk_pllv3 no longer takes care of the ENABLE and BYPASS bits,
hence the USB PLL were not configured correctly anymore.

This patch not only fixes those USB PLL's, but also makes use of
the imx_clk_pllv3 for all PLL's and alignes the code with the PLL
support of the i.MX6 series.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-04 13:40:14 +08:00
Koji Matsuoka 148ebf479a ARM: shmobile: r8a7794: Add VIN clock to device tree
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-04 09:09:52 +09:00
Gabriel FERNANDEZ 77deed2bbd ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocks
This patch adds all clock defines for clockgen C0,D0,D2 and D3

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31 12:07:43 +01:00
Abhilash Kesavan 932e98224d clk: samsung: exynos7: add gate clock for ADC block
Add clock support for the ADC interface in Exynos7.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:54 +01:00
Naveen Krishna Ch 2ab2dfe5d4 clk: samsung: exynos7: add gate clocks for WDT, TMU and PWM blocks
Add clock support for the watchdog timer, pwm timer and thermal
management unit IPs in Exynos7.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:53 +01:00
Naveen Krishna Ch f5e127cd5e clk: samsung: exynos7: add clocks for RTC block
Add clock support for the RTC block in Exynos7.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:52 +01:00
Naveen Krishna Ch 6d0c8c723f clk: samsung: exynos7: add clocks for MMC block
Exynos7 supports 3 MMC channels, add the MMC gate clocks to
support them.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:51 +01:00
Naveen Krishna Ch 57a2b485fa clk: samsung: exynos7: add clocks for I2C block
Exynos7 supports 12 I2C channels, add the I2C gate clocks to
support them.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:51 +01:00
Naveen Krishna Ch 532abc3a4a clk: samsung: add initial clock support for Exynos7 SoC
Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Thomas Abraham <thomas.ab@samsung.com>
Tested-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:47 +01:00
Gabriel FERNANDEZ 1befe7e49f ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0
Patch adds DT entries for clockgen C0

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31 09:59:09 +01:00
Maxime Coquelin c759e5f76b reset: stih407: Add reset controllers DT bindings
This patch adds softreset, powerdown and picophy reset controllers
DT bindings for the STiH407 SoC.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31 09:47:54 +01:00
Chanwoo Choi 384cb2ce81 clk: samsung: exynos4415: Add clocks using common clock framework
This patch adds clock driver of Exynos4415 SoC based on Cortex-A9 using
common clock framework. The CMU (Clock Management Unit) of Exynos4415
controls PLLs(Phase Locked Loops) and generates system clocks for CPU,
busses and function clocks for individual IPs.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-30 19:53:04 +01:00
Yoshifumi Hosoya 74d89d25f6 ARM: shmobile: r8a7791: Add MMP clock to device tree
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 09:56:28 +09:00
Yoshifumi Hosoya 4ba8f2468c ARM: shmobile: r8a7790: Add MMP clock to device tree
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 09:56:28 +09:00
Kouei Abe e4d2fd9eb4 ARM: shmobile: r8a7791: Add SGX clock to device tree
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 09:56:27 +09:00
Kouei Abe 2284ff5f3f ARM: shmobile: r8a7790: Add RGX clock to device tree
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 09:56:27 +09:00
Geert Uytterhoeven 3ab84ee95b ARM: shmobile: r8a7740 dtsi: Add missing INTCA clock for irqpin module
This clock drives the INTCA irqpin controller modules.
Before, it was assumed enabled by the bootloader or reset state.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: devicetree@vger.kernel.org
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 09:56:22 +09:00
Ivan T. Ivanov 89a7117d56 pinctrl: Device tree bindings for Qualcomm PMIC MPP block
DeviceTree binding documentation for Qualcomm SPMI PMIC MPP
pinctrl drivers.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-29 09:28:36 +01:00
Bjorn Andersson 43059f6ba2 pinctrl: Device tree bindings for Qualcomm PMIC GPIO block
This introduced the device tree bindings for the GPIO block found
in PMIC's from Qualcomm.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-29 09:28:36 +01:00
Ulf Hansson 5dcb10159b dt: bindings: ux500: Add header for PM domains specifiers
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-28 10:47:57 +01:00
Steve Longerbeam a1fc198046 ARM: i.MX6: Fix "emi" clock name typo
Fix a typo error, the "emi" names refer to the eim clocks.

The change fixes typo in EIM and EIM_SLOW pre-output dividers and
selectors clock names. Notably EIM_SLOW clock itself is named correctly.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
[vladimir_zapolskiy@mentor.com: ported to v3.17]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25 20:01:09 +08:00
Javier Martinez Canillas 5356e0da49 regulator: max77802: Add header for operating modes
Add a header file for the max77802 constants that could be shared between
the regulator driver and Device Tree source files. Also, remove standby
and off opmodes since only normal and low power are valid operating modes.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20 12:23:50 +01:00