Tero Kristo d9bbe84f67 ARM: AM33xx: PRM: add support for prm_init ... Added support for prm_init for AM33xx SoC. This is needed to register SoC specific prm_ll_data for these devices. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2014-10-27 08:39:24 -07:00
..
include/mach	…
Kconfig	ARM: SoC driver updates for 3.18	2014-10-08 17:37:16 -04:00
Makefile	ARM: SoC driver updates for 3.18	2014-10-08 17:37:16 -04:00
Makefile.boot	…
am33xx-restart.c	…
am33xx.h	…
am35xx-emac.c	…
am35xx-emac.h	…
am35xx.h	…
board-3430sdp.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-am3517crane.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-am3517evm.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-cm-t35.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-cm-t3517.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-devkit8000.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-flash.c	mtd: nand: omap: Revert to using software ECC by default	2014-08-25 16:15:32 -07:00
board-flash.h	…
board-generic.c	ARM: SoC driver updates for 3.18	2014-10-08 17:37:16 -04:00
board-ldp.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-n8x0.c	arm: omap2: n8x0: move i2c devices to DT	2014-09-16 14:43:11 -07:00
board-omap3beagle.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-omap3logic.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-omap3pandora.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-omap3stalker.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-omap3touchbook.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-overo.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-rx51-peripherals.c	…
board-rx51-video.c	…
board-rx51.c	arm: omap: irq: drop omap3_intc_handle_irq()	2014-09-11 13:05:40 -07:00
board-rx51.h	…
board-ti8168evm.c	…
cclock3xxx_data.c	…
clkt2xxx_apll.c	…
clkt2xxx_dpll.c	…
clkt2xxx_dpllcore.c	…
clkt2xxx_virt_prcm_set.c	…
clkt34xx_dpll3m2.c	…
clkt_clksel.c	…
clkt_dpll.c	Few fixes for the v3.17 merge window:	2014-08-09 08:23:27 -07:00
clkt_iclk.c	ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file	2014-07-15 14:09:24 -06:00
clock.c	ARM: OMAP2+: CM: add common API for cm_wait_module_ready	2014-10-27 08:39:23 -07:00
clock.h	ARM: SoC device-tree changes for 3.17	2014-08-08 11:16:58 -07:00
clock2xxx.c	…
clock2xxx.h	ARM: OMAP2: convert sys_ck and osc_ck to standard clock types	2014-07-02 14:26:06 +03:00
clock3xxx.c	…
clock3xxx.h	…
clock34xx.c	…
clock34xx.h	…
clock36xx.c	…
clock36xx.h	…
clock44xx.h	…
clock2430.c	…
clock3517.c	…
clock3517.h	…
clock_common_data.c	…
clockdomain.c	…
clockdomain.h	…
clockdomains2xxx_3xxx_data.c	…
clockdomains3xxx_data.c	…
clockdomains7xx_data.c	…
clockdomains33xx_data.c	…
clockdomains43xx_data.c	…
clockdomains44xx_data.c	…
clockdomains54xx_data.c	…
clockdomains2420_data.c	…
clockdomains2430_data.c	…
cm-regbits-7xx.h	…
cm-regbits-24xx.h	ARM: OMAP2: convert sys_ck and osc_ck to standard clock types	2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h	…
cm-regbits-34xx.h	ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver	2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h	…
cm-regbits-54xx.h	…
cm.h	ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable	2014-10-27 08:39:24 -07:00
cm1_7xx.h	…
cm1_44xx.h	…
cm1_54xx.h	…
cm2_7xx.h	arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy	2014-07-22 14:35:05 -06:00
cm2_44xx.h	…
cm2_54xx.h	…
cm2xxx.c	ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static	2014-10-27 08:39:24 -07:00
cm2xxx.h	ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static	2014-10-27 08:39:24 -07:00
cm2xxx_3xxx.h	…
cm3xxx.c	ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static	2014-10-27 08:39:24 -07:00
cm3xxx.h	ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static	2014-10-27 08:39:24 -07:00
cm33xx.c	ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable	2014-10-27 08:39:24 -07:00
cm33xx.h	ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable	2014-10-27 08:39:24 -07:00
cm44xx.c	…
cm44xx.h	…
cm_44xx_54xx.h	…
cm_common.c	ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable	2014-10-27 08:39:24 -07:00
cminst44xx.c	ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable	2014-10-27 08:39:24 -07:00
cminst44xx.h	ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable	2014-10-27 08:39:24 -07:00
common-board-devices.c	…
common-board-devices.h	arm: omap2: n8x0: move i2c devices to DT	2014-09-16 14:43:11 -07:00
common.c	ARM: OMAP2+: remove DSP platform device	2014-07-15 21:01:05 -07:00
common.h	ARM: SoC platform changes for 3.18	2014-10-08 17:13:04 -04:00
control.c	ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c	2014-08-01 01:21:14 -07:00
control.h	Merge branch 'for-v3.17/cm-prm-cleanup' of https://github.com/t-kristo/linux-pm into omap-for-v3.17/soc	2014-07-15 07:00:00 -07:00
cpuidle34xx.c	…
cpuidle44xx.c	…
ctrl_module_wkup_44xx.h	…
devices.c	SoC related changes for omaps for v3.17 merge window:	2014-07-26 11:33:34 +02:00
devices.h	…
display.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
display.h	…
dma.c	ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver	2014-07-21 23:32:51 -07:00
dpll3xxx.c	Modify OMAP PLL rate rounding function to round to the exact rate requested	2014-07-29 04:03:30 -07:00
dpll44xx.c	ARM: OMAP4+: dpll44xx: remove cm-regbits-44xx.h and clock44xx.h includes	2014-07-15 14:08:49 -06:00
drm.c	…
dss-common.c	…
dss-common.h	…
emu.c	…
fb.c	…
gpio.c	…
gpmc-nand.c	mtd: nand: omap: Revert to using software ECC by default	2014-08-25 16:15:32 -07:00
gpmc-nand.h	…
gpmc-onenand.c	…
gpmc-onenand.h	…
gpmc-smc91x.c	…
gpmc-smc91x.h	…
gpmc-smsc911x.c	…
gpmc-smsc911x.h	…
gpmc.c	MTD updates for 3.18	2014-10-18 11:48:03 -07:00
gpmc.h	…
hdq1w.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
hdq1w.h	…
hsmmc.c	…
hsmmc.h	…
hwspinlock.c	…
i2c.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
i2c.h	…
id.c	ARM: OMAP: fix %d confusingly prefixed with 0x in format string	2014-08-25 16:15:34 -07:00
id.h	…
io.c	ARM: AM33xx: PRM: add support for prm_init	2014-10-27 08:39:24 -07:00
iomap.h	…
l3_2xxx.h	…
l3_3xxx.h	…
l4_2xxx.h	…
l4_3xxx.h	…
mcbsp.c	…
mmc.h	…
msdi.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
mux.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
mux.h	…
mux34xx.c	…
mux34xx.h	…
omap-headsmp.S	…
omap-hotplug.c	…
omap-iommu.c	ARM: omap: Don't set iommu pdata da_start and da_end fields	2014-07-29 12:39:23 +02:00
omap-mpuss-lowpower.c	Merge branch 'pull/v3.18/for-omap-soc' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/soc	2014-09-08 15:20:15 -07:00
omap-pm-noop.c	…
omap-pm.h	…
omap-secure.c	…
omap-secure.h	ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default	2014-09-08 11:38:41 -05:00
omap-smc.S	…
omap-smp.c	…
omap-wakeupgen.c	ARM: OMAP5 / DRA7: Enable CPU RET on suspend	2014-09-08 11:38:43 -05:00
omap-wakeupgen.h	ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default	2014-09-08 11:38:41 -05:00
omap2-restart.c	…
omap3-restart.c	…
omap4-common.c	ARM: OMAP4+: Remove static iotable mappings for SRAM	2014-09-18 09:47:35 -07:00
omap4-restart.c	…
omap4-sar-layout.h	…
omap24xx.h	…
omap34xx.h	…
omap44xx.h	…
omap54xx.h	…
omap_device.c	ARM: OMAP2+: omap_device: remove warning that clk alias already exists	2014-08-25 16:15:34 -07:00
omap_device.h	…
omap_hwmod.c	ARM: AM43xx: hwmod: use OMAP4 hardreset ops instead of the AM33xx version	2014-10-27 08:39:24 -07:00
omap_hwmod.h	ARM: OMAP2+: Add hwmod flag for HWMOD_RECONFIG_IO_CHAIN	2014-09-18 08:58:28 -07:00
omap_hwmod_2xxx_3xxx_interconnect_data.c	ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs	2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c	ARM: AM43xx: hwmod: add DSS hwmod data	2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c	…
omap_hwmod_2xxx_ipblock_data.c	…
omap_hwmod_3xxx_data.c	ARM: OMAP3: Use manual idle for UARTs because of DMA errata	2014-09-18 08:58:49 -07:00
omap_hwmod_7xx_data.c	ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists	2014-08-27 19:38:23 -06:00
omap_hwmod_33xx_43xx_common_data.h	…
omap_hwmod_33xx_43xx_interconnect_data.c	ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs	2014-07-15 05:08:56 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c	…
omap_hwmod_33xx_data.c	…
omap_hwmod_43xx_data.c	ARM: AM43xx: hwmod: add DSS hwmod data	2014-07-05 17:44:57 -06:00
omap_hwmod_44xx_data.c	ARM: SoC platform changes for 3.17	2014-08-08 11:14:29 -07:00
omap_hwmod_54xx_data.c	ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods	2014-06-15 20:12:52 -06:00
omap_hwmod_2420_data.c	ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs	2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c	ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs	2014-07-15 05:08:56 -07:00
omap_hwmod_common_data.c	…
omap_hwmod_common_data.h	ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs	2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c	ARM: AM43xx: hwmod: add DSS hwmod data	2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c	…
omap_opp_data.h	…
omap_phy_internal.c	…
omap_twl.c	…
opp.c	…
opp2xxx.h	…
opp3xxx_data.c	…
opp4xxx_data.c	…
opp2420_data.c	…
opp2430_data.c	…
pdata-quirks.c	ARM: SoC driver updates for 3.18	2014-10-08 17:37:16 -04:00
pm-debug.c	…
pm.c	cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'	2014-10-03 15:37:54 +02:00
pm.h	ARM: OMAP5 / DRA7: Enable CPU RET on suspend	2014-09-08 11:38:43 -05:00
pm24xx.c	ARM: SoC device-tree changes for 3.17	2014-08-08 11:16:58 -07:00
pm34xx.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
pm44xx.c	Merge branch 'pull/v3.18/for-omap-soc' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/soc	2014-09-08 15:20:15 -07:00
pmu.c	…
powerdomain-common.c	…
powerdomain.c	ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain	2014-09-08 11:22:41 -05:00
powerdomain.h	ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain	2014-09-08 11:22:41 -05:00
powerdomains2xxx_3xxx_data.c	…
powerdomains2xxx_3xxx_data.h	…
powerdomains2xxx_data.c	…
powerdomains3xxx_data.c	…
powerdomains7xx_data.c	ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate	2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c	…
powerdomains43xx_data.c	…
powerdomains44xx_data.c	…
powerdomains54xx_data.c	ARM: OMAP5: powerdomain data: fix powerdomain powerstate	2014-09-08 11:22:40 -05:00
prcm-common.h	…
prcm43xx.h	ARM: AM43xx: hwmod: add DSS hwmod data	2014-07-05 17:44:57 -06:00
prcm44xx.h	…
prcm_mpu7xx.h	…
prcm_mpu44xx.c	…
prcm_mpu44xx.h	…
prcm_mpu54xx.h	…
prcm_mpu_44xx_54xx.h	…
prm-regbits-24xx.h	…
prm-regbits-33xx.h	…
prm-regbits-34xx.h	ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver	2014-07-06 15:51:23 -06:00
prm-regbits-44xx.h	…
prm.h	ARM: DRA7: PRM: add voltage processor check behind a prm_feature flag	2014-10-27 08:39:23 -07:00
prm2xxx.c	ARM: OMAP24xx: PRM: add API for clearing wakeup status bits	2014-07-04 17:02:16 +03:00
prm2xxx.h	ARM: OMAP24xx: PRM: add API for clearing wakeup status bits	2014-07-04 17:02:16 +03:00
prm2xxx_3xxx.c	…
prm2xxx_3xxx.h	…
prm3xxx.c	ARM: SoC platform changes for 3.18	2014-10-08 17:13:04 -04:00
prm3xxx.h	ARM: OMAP3: PRM: move PRM init code from PM core to the driver	2014-07-04 17:02:17 +03:00
prm7xx.h	arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy	2014-07-22 14:35:05 -06:00
prm33xx.c	ARM: AM33xx: PRM: add support for prm_init	2014-10-27 08:39:24 -07:00
prm33xx.h	ARM: AM33xx: PRM: add support for prm_init	2014-10-27 08:39:24 -07:00
prm44xx.c	ARM: DRA7: PRM: add voltage processor check behind a prm_feature flag	2014-10-27 08:39:23 -07:00
prm44xx.h	…
prm44xx_54xx.h	…
prm54xx.h	…
prm_common.c	The clk tree changes for 3.18 are dominated by clock drivers. Mostly	2014-10-15 07:05:03 +02:00
prminst44xx.c	ARM: OMAP4+: prminst: provide function to find prm_dev instance offset	2014-09-08 10:53:25 -05:00
prminst44xx.h	ARM: OMAP4+: prminst: provide function to find prm_dev instance offset	2014-09-08 10:53:25 -05:00
scrm44xx.h	…
scrm54xx.h	…
sdram-hynix-h8mbx00u0mer-0em.h	…
sdram-micron-mt46h32m32lf-6.h	…
sdram-nokia.c	…
sdram-nokia.h	…
sdram-numonyx-m65kxxxxam.h	…
sdram-qimonda-hyb18m512160af-6.h	…
sdrc.c	…
sdrc.h	…
sdrc2xxx.c	…
serial.c	…
serial.h	…
sleep24xx.S	…
sleep34xx.S	…
sleep44xx.S	ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+	2014-07-18 12:29:04 +01:00
smartreflex-class3.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
soc.h	ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants	2014-08-27 19:38:22 -06:00
sr_device.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
sram.c	ARM: OMAP4+: Remove static iotable mappings for SRAM	2014-09-18 09:47:35 -07:00
sram.h	ARM: OMAP4+: Remove static iotable mappings for SRAM	2014-09-18 09:47:35 -07:00
sram34xx.S	…
sram242x.S	ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+	2014-07-18 12:29:04 +01:00
sram243x.S	ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+	2014-07-18 12:29:04 +01:00
ti81xx.h	…
timer.c	ARM: OMAP2+: make of_device_ids const	2014-09-11 12:37:23 -07:00
twl-common.c	…
twl-common.h	…
usb-host.c	…
usb-musb.c	…
usb-tusb6010.c	ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once	2014-07-07 04:52:31 -07:00
usb.h	…
vc.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
vc.h	…
vc3xxx_data.c	…
vc44xx_data.c	…
voltage.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
voltage.h	…
voltagedomains2xxx_data.c	…
voltagedomains3xxx_data.c	…
voltagedomains44xx_data.c	…
voltagedomains54xx_data.c	…
vp.c	…
vp.h	…
vp3xxx_data.c	…
vp44xx_data.c	…
wd_timer.c	arm: mach-omap2: Convert pr_warning to pr_warn	2014-09-18 09:53:57 -07:00
wd_timer.h	…