io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the
PCI Express PASID capability is 0 and pasid is enabled. Make sure that the
WQCFG priv field is set correctly according to usage type. Reject config if
setting up kernel WQ type and no support. Also add the correct priv setup
for a descriptor.
Fixes: 484f910e93 ("dmaengine: idxd: fix wq config registers offset programming")
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The signaling from within encapsulated OP capability is merged into the
existing stream architecture, such that one can trigger multiple
signaling from an encapsulated op, according to the time the event
was done in the graph execution and avoid the need to wait for the
whole encapsulated OP execution to be complete before the stream can
signal.
This commit implements only the reserve/unreserve part.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When user sends multiple CSs, waiting for each CS is not efficient
as it involves many user-kernel context switches.
In order to address this issue we add support to "wait on multiple CSs"
using a new uAPI which can wait on maximum of 32 CSs. The new uAPI is
defined using a new flag - WAIT_FOR_MULTI_CS - in the wait_for_cs IOCTL.
The input parameters for this uAPI will be:
@seq: user pointer to an array of up to 32 CS's sequence numbers.
@seq_array_len: length of sequence array.
@timeout_us: timeout for waiting for any CS.
The output paramateres for this API will be:
@status: multi CS ioctl completion status (dedicated status was added as
well).
@flags: bitmap of output flags of the CS.
@cs_completion_map: bitmap for multi CS, if CS sequence that was placed
in index N in input seq array has completed- the N-th
bit in cs_completion_map will be 1, otherwise it will
be 0.
@timestamp_nsec: timestamp of the first completed CS
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A new user flag is required to make memory map hint mandatory, in
contrast to the current situation where it is best effort.
This is due to the requirement to map certain data to specific
pre-determined device virtual address ranges.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:
(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.
Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.
After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.
In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-08-27
1) Remove an unneeded extra variable in esp4 esp_ssg_unref.
From Corey Minyard.
2) Add a configuration option to change the default behaviour
to block traffic if there is no matching policy.
Joint work with Christian Langrock and Antony Antony.
3) Fix a shift-out-of-bounce bug reported from syzbot.
From Pavel Skripkin.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The identifier names in the documentation here didn't match
the real ones, and the reserved was missing. Fix that.
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The bulk of these changes is a more modern ABI that can be efficiently
used on newer SoCs as well as older ones. The userspace parts for this
are available here:
- libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8
- VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver
In addition, existing userspace from the grate reverse-engineering
project has been updated to use this new ABI:
- X11 driver: https://github.com/grate-driver/xf86-video-opentegra
- 3D driver: https://github.com/grate-driver/grate
Other than that, there's also support for display memory bandwidth
management for various generations and a bit of cleanup.
-----BEGIN PGP SIGNATURE-----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=kDS1
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.15-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.15-rc1
The bulk of these changes is a more modern ABI that can be efficiently
used on newer SoCs as well as older ones. The userspace parts for this
are available here:
- libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8
- VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver
In addition, existing userspace from the grate reverse-engineering
project has been updated to use this new ABI:
- X11 driver: https://github.com/grate-driver/xf86-video-opentegra
- 3D driver: https://github.com/grate-driver/grate
Other than that, there's also support for display memory bandwidth
management for various generations and a bit of cleanup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813163616.2822355-1-thierry.reding@gmail.com
The motivation behind this helper is to access userspace pt_regs in a
kprobe handler.
uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace
pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a
kprobe handler. The final case (kernelspace pt_regs in uprobe) is
pretty rare (usermode helper) so I think that can be solved later if
necessary.
More concretely, this helper is useful in doing BPF-based DWARF stack
unwinding. Currently the kernel can only do framepointer based stack
unwinds for userspace code. This is because the DWARF state machines are
too fragile to be computed in kernelspace [0]. The idea behind
DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace
stack (while in prog context) and send it up to userspace for unwinding
(probably with libunwind) [1]. This would effectively enable profiling
applications with -fomit-frame-pointer using kprobes and uprobes.
[0]: https://lkml.org/lkml/2012/2/10/356
[1]: https://github.com/danobi/bpf-dwarf-walk
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
Instead of opening a file into a process's file table as usual and then
registering the fd within io_uring, some users may want to skip the
first step and place it directly into io_uring's fixed file table.
This patch adds such a capability for IORING_OP_OPENAT and
IORING_OP_OPENAT2.
The behaviour is controlled by setting sqe->file_index, where 0 implies
the old behaviour using normal file tables. If non-zero value is
specified, then it will behave as described and place the file into a
fixed file slot sqe->file_index - 1. A file table should be already
created, the slot should be valid and empty, otherwise the operation
will fail.
Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and
EINVAL on inappropriate fixed tables, and return EBADF on collision with
already registered file.
Note: IOSQE_FIXED_FILE can't be used to switch between modes, because
accept takes a file, and it already uses the flag with a different
meaning.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add Exchange Diagnostic Capabilities (EDC) ELS definition and the following
capability descriptors:
- Link Fault Capability Descriptor
- Congestion Signaling Capability Descriptor
Definitions taken from FC-LS-5 r5.01
Link: https://lore.kernel.org/r/20210816162901.121235-2-jsmart2021@gmail.com
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, there are many drivers who support CQE mode configuration,
some configure it as a fixed when initialized, some provide an
interface to change it by ethtool private flags. In order to make it
more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and
'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these
parameters can be accessed by ethtool netlink coalesce uAPI.
Also add an new structure kernel_ethtool_coalesce, then the
new parameter can be added into this struct.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.
Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.
As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.
bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.
To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
IORING_OP_LINKAT behaves like linkat(2) and takes the same flags and
arguments.
In some internal places 'hardlink' is used instead of 'link' to avoid
confusion with the SQE links. Name 'link' conflicts with the existing
'link' member of io_kiocb.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-12-dkadashev@gmail.com
[axboe: add splice_fd_in check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 819fbd3d8e.
It turns out that some user-space applications use these uapi header
files, so even though the only user of the interface is an old driver
that was moved to staging, moving the header files causes unnecessary
pain.
Generally, we really don't want user space to use kernel headers
directly (exactly because it causes pain when we re-organize), and
instead copy them as needed. But these things happen, and the headers
were in the uapi directory, so I guess it's not entirely unreasonable.
Link: https://lore.kernel.org/lkml/4e3e0d40-df4a-94f8-7c2d-85010b0873c4@web.de/
Reported-by: Soeren Moch <smoch@web.de>
Cc: stable@kernel.org # 5.13
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A module can have two kinds of set params, as per topology requirements.
For example, one pre-init and one post-init. But currently, there is
support for just one type, as the format_config.
This patch extends the format_configs to 4, so as to be able to support
pre-init, post-init and post-bind type of set params, for the same
module, simultaneously.
Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add new types of KVM stats, linear and logarithmic histogram.
Histogram are very useful for observing the value distribution
of time or size related stats.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-2-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* BSS coloring support
* MEI commands for Intel platforms
* various fixes/cleanups
-----BEGIN PGP SIGNATURE-----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=q8bL
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Minor updates:
* BSS coloring support
* MEI commands for Intel platforms
* various fixes/cleanups
* tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
cfg80211: fix BSS color notify trace enum confusion
mac80211: Fix insufficient headroom issue for AMSDU
mac80211: add support for BSS color change
nl80211: add support for BSS coloring
mac80211: Use flex-array for radiotap header bitmap
mac80211: radiotap: Use BIT() instead of shifts
mac80211: Remove unnecessary variable and label
mac80211: include <linux/rbtree.h>
mac80211: Fix monitor MTU limit so that A-MSDUs get through
mac80211: remove unnecessary NULL check in ieee80211_register_hw()
mac80211: Reject zero MAC address in sta_info_insert_check()
nl80211: vendor-cmd: add Intel vendor commands for iwlmei usage
====================
Link: https://lore.kernel.org/r/20210820105329.48674-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The per-vlan router option controls the port/vlan and host vlan entries'
mcast router config. The global option controlled only the host vlan
config, but that is unnecessary and incosistent as it's not really a
global vlan option, but rather bridge option to control host router
config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to
BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host
vlan and port vlan mcast router config.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an I2C bus driver for virtio para-virtualization.
The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.
The device specification can be found on
https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html.
By following the specification, people may implement different
backend drivers to emulate different controllers according to
their needs.
Co-developed-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The default IO priority is the best effort (BE) class with the
normal priority level IOPRIO_NORM (4). However, get_task_ioprio()
returns IOPRIO_CLASS_NONE/IOPRIO_NORM as the default priority and
get_current_ioprio() returns IOPRIO_CLASS_NONE/0. Let's be consistent
with the defined default and have both of these functions return the
default priority IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM) when
the user did not define another default IO priority for the task.
In include/uapi/linux/ioprio.h, introduce the IOPRIO_BE_NORM macro as
an alias to IOPRIO_NORM to clarify that this default level applies to
the BE priotity class. In include/linux/ioprio.h, define the macro
IOPRIO_DEFAULT as IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_BE_NORM)
and use this new macro when setting a priority to the default.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-7-damien.lemoal@wdc.com
[axboe: drop unnecessary lightnvm change]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The BFQ scheduler and ioprio_check_cap() both assume that the RT
priority class (IOPRIO_CLASS_RT) can have up to 8 different priority
levels, similarly to the BE class (IOPRIO_CLASS_iBE). This is
controlled using the IOPRIO_BE_NR macro , which is badly named as the
number of levels also applies to the RT class.
Introduce the class independent IOPRIO_NR_LEVELS macro, defined to 8,
to make things clear. Keep the old IOPRIO_BE_NR macro definition as an
alias for IOPRIO_NR_LEVELS.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-6-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ki_ioprio field of struct kiocb is 16-bits (u16) but often handled
as an int in the block layer. E.g. ioprio_check_cap() takes an int as
argument.
With such implicit int casting function calls, the upper 16-bits of the
int argument may be left uninitialized by the compiler, resulting in
invalid values for the IOPRIO_PRIO_CLASS() macro (garbage upper bits)
and in an error return for functions such as ioprio_check_cap().
Fix this by masking the result of the shift by IOPRIO_CLASS_SHIFT bits
in the IOPRIO_PRIO_CLASS() macro. The new macro IOPRIO_CLASS_MASK
defines the 3-bits mask for the priority class.
Similarly, apply the IOPRIO_PRIO_MASK mask to the data argument of the
IOPRIO_PRIO_VALUE() macro to ignore the upper bits of the data value.
The IOPRIO_CLASS_MASK mask is also applied to the class argument of this
macro before shifting the result by IOPRIO_CLASS_SHIFT bits.
While at it, also change the argument name of the IOPRIO_PRIO_CLASS()
and IOPRIO_PRIO_DATA() macros from "mask" to "ioprio" to reflect the
fact that a priority value should be passed rather than a mask.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-5-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the ioprio_valid() macro in include/usapi/linux/ioprio.h to an
inline function declared on the kernel side in include/linux/ioprio.h.
Also improve checks on the class value by checking the upper bound
value.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In include/usapi/linux/ioprio.h, change the ioprio class enum comment
to remove the outdated reference to CFQ and mention BFQ and mq-deadline
instead. Also document the high priority NCQ command use for RT class
IOs directed at ATA drives that support NCQ priority.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch added and managed a new per endpoint flag, named
MPTCP_PM_ADDR_FLAG_FULLMESH.
In mptcp_pm_create_subflow_or_signal_addr(), if such flag is set, instead
of:
remote_address((struct sock_common *)sk, &remote);
fill a temporary allocated array of all known remote address. After
releaseing the pm lock loop on such array and create a subflow for each
remote address from the given local.
Note that the we could still use an array even for non 'fullmesh'
endpoint: with a single entry corresponding to the primary MPC subflow
remote address.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Including one's name in copyright claims is appropriate. Including it
in random comments is just vanity. After 2 decades, it is time for
these to be gone.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch adds support for BSS color collisions to the wireless subsystem.
Add the required functionality to nl80211 that will notify about color
collisions, triggering the color change and notifying when it is completed.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/500b3582aec8fe2c42ef46f3117b148cb7cbceb5.1625247619.git.lorenzo@kernel.org
[remove unnecessary NULL initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.
BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.
Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.
One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.
The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST means the input
external clock signal for SerDes is too weak or lost.
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS means the received signal for
SerDes is too weak because analog loss of signal.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring, so to
delete uapi/linux/ipx.h and net/ipx.h header files for good.
additionally, there is no module that depends on ipx.h except
a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new mcast querier state dump infrastructure and export vlans'
mcast context querier state embedded in attribute
BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dumping global IPv6 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IPV6_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IPV6_PORT] - bridge port ifindex where the querier
was seen (set only if external querier)
`[BRIDGE_QUERIER_IPV6_OTHER_TIMER] - other querier timeout
IPv4 and IPv6 attributes are embedded at the same level of
IFLA_BR_MCAST_QUERIER_STATE. If we didn't dump anything we cancel the nest
and return.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dumping global IPv4 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was
seen (set only if external querier)
`[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ALSA PCM core has an optimized way to communicate with user-space for
its control and status data via mmap on the supported architectures
like x86. Depending on the situation, however, we'd rather want to
enforce user-space notifying the applptr or hwptr change explicitly
via ioctl. For example, the upcoming non-contig and non-coherent
buffer handling would need an explicit sync, and this needs to catch
the applptr and hwptr changes. Also, ASoC SOF driver will have the
SPIB support that has the similar requirement for the explicit control
of the applptr and hwptr.
This patch adds the new PCM hardware info flag,
SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core
disables both the control and the status mmap, which enforces
user-space to update via SYNC_PTR ioctl. In that way, drivers can
catch the applptr and hwptr update and apply the sync operation if
needed.
Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iwlmei allows to integrate with the CSME firmware. There are
flows that are prioprietary for this purpose:
* Get the information of the AP the CSME firmware is connected
to. This is useful when we need to speed up the connection
process in case the CSME firmware has a TCP connection
that must be kept alive across the ownership transition.
* Forbid roaming, which will happen when the CSME firmware
wants to tell the user space not disrupt the connection.
* Request ownership, upon driver boot when the CSME firmware
owns the device. This is a notification sent by the kernel.
All those commands are expected to be used by any software
managing the connection (mainly NetworkManager). Those commands
are expected to be used only in case the CSME firmware owns
the device and doesn't want to release the device unless the
host made sure that it can keep the connectivity.
Here are the steps of the expected flow:
1) The machine boots while AMT has an active TCP connection
2) iwlwifi starts and tries to access the device
3) The device is not available because of the active TCP
connection. (If there are no active connections, the CSME
firmware would have allowed iwlwifi to use the device)
Note that all the steps up to here don't involve iwlmei. All
this happens in iwlwifi (in iwl_pcie_prepare_card_hw).
4) iwlmei establishes a connection to the CSME firmware (through
SAP)
Here iwlwifi uses iwlmei to access the device's capabilities
(since it can't touch the device), but this is not relevant
for the vendor commands.
5) The CSME firmware tells iwlmei that it uses the NIC and
that there is an acitve TCP connection, and hence, the
host needs to think twice before asking the CSME firmware
to release the device
6) iwlmei tells iwlwifi to report HW RFKILL with a special
reason
Up to here, there was no user space involved.
7) The user space (NetworkManager) boots and sees that the
device is in RFKILL because the host doesn't own the
device
8) The user space asks the kernel what AP the CSME firmware
is connected to (with the first vendor command mentionned
above)
9) The user space checks if it has a profile that matches the
reply from the CSME firmware
10) The user space installs a network to the wpa_supplicant
with a specific BSSID and a specific frequency
11) The user space prevents any type of full scan
12) The user space asks iwlmei to request ownership on the
device (with the third vendor command)
13) iwlmei request ownership from the CSME firmware
14) The CSME firmware grants ownership
15) iwlmei tells iwlwifi to lift the RFKILL
16) RFKILL OFF is reported to userspace
17) The host boots the device, loads the firwmare, and
connect to a specific BSSID without scanning including IP
in less than 600ms (this is what I measured, of course
it depends on many factors)
18) The host reports to the CSME firmware that there is a
connection
19) The TCP connection is preserved and the host has now
connectivity
20) Later, the TCP connection to the CSME firmware is
terminated
21) The CSME firmware tells iwlmei that it is now free to
do whatever it likes
22) iwlwifi sends the second vendor command to tell the
user space that it can remove the special network
configuration and pick any SSID / BSSID it likes.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210625081717.7680-4-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
-----BEGIN PGP SIGNATURE-----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=CR6R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEVhscACgkQmmx57+YA
GNlOcxAAlSAsiZWe7B/1TuA8R903Zq1/Dq3pYvPtmancGL9N32GM081Xr123sHyx
sO5KsxU94Zed+9h2UQl0kU9/JHve8+utzLnBQvk7xYypRtDe0gOgTuOUiGIcUuFH
xMkwV9kzSOXJlaUzlFrHqDYPF/ve9eQ7RHbH/7K3pfBdbNgRPkPzyGkMM0qYEz7T
RTVAGl4nMsUkaqqEs1TRtPN3UWpbX08xphZwSC8dKRJtbnwUYpaYNvaBPzyKFhgp
zBK6JlMoiqaLN6gW5rZzsZc6hoRv5H8jLPnHPKpFlAuQK/Z1QXbqN4mBU49VnLFf
hyQNOZxSadw6BEapY+aG+r+RY5hKgk4CXcN8hbmDjGXVDoplrhbqUhj9zW3VFIT/
0JLbDUq92tjBPyjAMYxy/oRs2qMgtOajsrqRHZTwNyZthhdW/9M04siAYb2LfFdP
Q9Ydxw6dG7rPPficXtNiasXzd2+/RotCQioymR9nJp94xqbI+gm7ci8veHWMyVtQ
s68DxBgED0k4CrNxVa6vgWWAn1yVLKfeU5lONx4aNPSRVBs1WuepKW5IuWsM0Cn5
QH9DJ6XX7Yo91ykOCPfvxN/JEPgMydAzBThbXJAVWRHh8Esk68fYusq+dMmnNA3H
WD22l4sCZXaGKRsmRG89a6qYognBtBJtrX93I574Odr9xXvL5kc=
=H7PM
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SCMI Updates for v5.15
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
* tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
firmware: arm_scmi: Free mailbox channels if probe fails
firmware: arm_scmi: Add virtio transport
firmware: arm_scmi: Add priv parameter to scmi_rx_callback
dt-bindings: arm: Add virtio transport for SCMI
firmware: arm_scmi: Add optional link_supplier() transport op
firmware: arm_scmi: Add message passing abstractions for transports
firmware: arm_scmi: Add method to override max message number
firmware: arm_scmi: Make shmem support optional for transports
firmware: arm_scmi: Make SCMI transports configurable
firmware: arm_scmi: Make polling mode optional
firmware: arm_scmi: Make .clear_channel optional
firmware: arm_scmi: Handle concurrent and out-of-order messages
firmware: arm_scmi: Introduce monotonically increasing tokens
firmware: arm_scmi: Add optional transport_init/exit support
firmware: arm_scmi: Remove scmi_dump_header_dbg() helper
firmware: arm_scmi: Add support for type handling in common functions
Link: https://lore.kernel.org/r/20210811075743.707961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UAPI Changes:
- Add I915_MMAP_OFFSET_FIXED
On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
type. On devices without local memory, this caching mode is invalid.
As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
be used, depending on the object placement on creation. WB will be used
when the object can only exist in system memory, WC otherwise.
Userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11888
- Reinstate the mmap ioctl for (already released) integrated Gen12 platforms
Rationale: Otherwise media driver breaks eg. for ADL-P. Long term goal is
still to sunset the IOCTL even for integrated and require using mmap_offset.
- Reject caching/set_domain IOCTLs on discrete
Expected to become immutable property of the BO
- Disallow changing context parameters after first use on Gen12 and earlier
- Require setting context parameters at creation on platforms after Gen12
Rationale (for both): Allow less dynamic changes to the context to simplify
the implementation and avoid user shooting theirselves in the foot.
- Drop I915_CONTEXT_PARAM_RINGSIZE
Userspace PR for compute-driver has not been merged
- Drop I915_CONTEXT_PARAM_NO_ZEROMAP
Userspace PR for libdrm / Beignet was never landed
- Drop CONTEXT_CLONE API
Userspace PR for Mesa was never landed
- Drop getparam support for I915_CONTEXT_PARAM_ENGINES
Only existed for symmetry wrt. setparam, never used.
- Disallow bonding of virtual engines
Drop the prep work, no hardware has been released needing it.
- (Implicit) Disable gpu relocations
Media userspace was the last userspace to still use them. They
have converted so performance can be regained with an update.
Core Changes:
- Merge topic branch 'topic/i915-ttm-2021-06-11' (from Maarten)
- Merge topic branch 'topic/revid_steppings' (from Matt R)
- Merge topic branch 'topic/xehp-dg2-definitions-2021-07-21' (from Matt R)
- Backmerges drm-next (Rodrigo)
Driver Changes:
- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)
- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)
- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
(Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)
- Document RFC plans for GuC submission, DRM scheduler and new parallel
submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)
- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
Rahul, Vinay)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQ0JmYiXhGskNcrI@jlahtine-mobl.ger.corp.intel.com
Embed the standard multicast router port export by br_rports_fill_info()
into a new global vlan attribute BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS.
In order to have the same format for the global bridge mcast context and
the per-vlan mcast context we need a double-nesting:
- BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS
- MDBA_ROUTER
Currently we don't compare router lists, if any router port exists in
the bridge mcast contexts we consider their option sets as different and
export them separately.
In addition we export the router port vlan id when dumping similar to
the router port notification format.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast router state
which is used for the bridge itself. We just need to pass multicast context
to br_multicast_set_router instead of bridge device and the rest of the
logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast querier state.
We just need to pass multicast context to br_multicast_set_querier
instead of bridge device and the rest of the logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast startup query
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast query response
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast query interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast querier interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast membership
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast last member
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast startup query
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast last member
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan IGMP/MLD versions.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use nfnetlink_unicast() instead of netlink_unicast() in nft_compat.
2) Remove call to nf_ct_l4proto_find() in flowtable offload timeout
fixup.
3) CLUSTERIP registers ARP hook on demand, from Florian.
4) Use clusterip_net to store pernet warning, also from Florian.
5) Remove struct netns_xt, from Florian Westphal.
6) Enable ebtables hooks in initns on demand, from Florian.
7) Allow to filter conntrack netlink dump per status bits,
from Florian Westphal.
8) Register x_tables hooks in initns on demand, from Florian.
9) Remove queue_handler from per-netns structure, again from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ignore fdb flags when adding port extern learn entries and always set
BR_FDB_LOCAL flag when adding bridge extern learn entries. This is
closest to the behaviour we had before and avoids breaking any use cases
which were allowed.
This patch fixes iproute2 calls which assume NUD_PERMANENT and were
allowed before, example:
$ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn
Extern learn entries are allowed to roam, but do not expire, so static
or dynamic flags make no sense for them.
Also add a comment for future reference.
Fixes: eb100e0e24 ("net: bridge: allow to add externally learned entries from user-space")
Fixes: 0541a62932 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the tegra_drm.h UAPI header, adding the new proposed UAPI.
The old staging UAPI is left in for now, with minor modification
to avoid name collisions.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Introduce a new flag FAN_REPORT_PIDFD for fanotify_init(2) which
allows userspace applications to control whether a pidfd information
record containing a pidfd is to be returned alongside the generic
event metadata for each event.
If FAN_REPORT_PIDFD is enabled for a notification group, an additional
struct fanotify_event_info_pidfd object type will be supplied
alongside the generic struct fanotify_event_metadata for a single
event. This functionality is analogous to that of FAN_REPORT_FID in
terms of how the event structure is supplied to a userspace
application. Usage of FAN_REPORT_PIDFD with
FAN_REPORT_FID/FAN_REPORT_DFID_NAME is permitted, and in this case a
struct fanotify_event_info_pidfd object will likely follow any struct
fanotify_event_info_fid object.
Currently, the usage of the FAN_REPORT_TID flag is not permitted along
with FAN_REPORT_PIDFD as the pidfd API currently only supports the
creation of pidfds for thread-group leaders. Additionally, usage of
the FAN_REPORT_PIDFD flag is limited to privileged processes only
i.e. event listeners that are running with the CAP_SYS_ADMIN
capability. Attempting to supply the FAN_REPORT_TID initialization
flags with FAN_REPORT_PIDFD or creating a notification group without
CAP_SYS_ADMIN will result with -EINVAL being returned to the caller.
In the event of a pidfd creation error, there are two types of error
values that can be reported back to the listener. There is
FAN_NOPIDFD, which will be reported in cases where the process
responsible for generating the event has terminated prior to the event
listener being able to read the event. Then there is FAN_EPIDFD, which
will be reported when a more generic pidfd creation error has occurred
when fanotify calls pidfd_create().
Link: https://lore.kernel.org/r/5f9e09cff7ed62bfaa51c1369e0f7ea5f16a91aa.1628398044.git.repnop@google.com
Signed-off-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?
Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yand <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The family is relevant for pseudo-families like NFPROTO_INET
otherwise the user needs to rely on the hook function name to
differentiate it from NFPROTO_IPV4 and NFPROTO_IPV6 names.
Add nfnl_hook_chain_desc_attributes instead of using the existing
NFTA_CHAIN_* attributes, since these do not provide a family number.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmEHNoEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGv34H/05pr8hlCcs14RcN
V6YWWHZoAi6jpClkp8612e3Pn9xTVFHaEd81E0dJVO7Vr0xAeuObeG7yDpbnFGIR
9Q1PLAeMJUi+dxLV7A0VpWHm15ODtDHnCd2P5y4YNvH/iiO0mMb6Pqw8bUF9HKII
M8u/Lqn8FXyHTUG2yqGTAZJgUVWpbD93IeKVHG4LdsiVCJuAaXLvg6LmkxWTYeGW
BcDDIL53sY4IgwrAVgwIji8Wiqmh4Bzp1+BvksPymA/91u0kJoZS9397CsDIomHp
i0RQ7Roo/sGamC7HR6MOHm21DiwIkwY1ULo+PglYSw5U3mohkMJemBvQRW3PGYJy
7SADmiE=
=LOoK
-----END PGP SIGNATURE-----
Merge tag 'v5.14-rc4' into media_tree
Linux 5.14-rc4
* tag 'v5.14-rc4': (948 commits)
Linux 5.14-rc4
pipe: make pipe writes always wake up readers
Revert "perf map: Fix dso->nsinfo refcounting"
mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
slub: fix unreclaimable slab stat for bulk free
mm/migrate: fix NR_ISOLATED corruption on 64-bit
mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
ocfs2: issue zeroout to EOF blocks
ocfs2: fix zero out valid data
lib/test_string.c: move string selftest in the Runtime Testing menu
gve: Update MAINTAINERS list
arch: Kconfig: clean up obsolete use of HAVE_IDE
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
scsi: fas216: Fix fall-through warning for Clang
scsi: acornscsi: Fix fall-through warning for clang
...
If CTA_STATUS is present, but CTA_STATUS_MASK is not, then the
mask is automatically set to 'status', so that kernel returns those
entries that have all of the requested bits set.
This makes more sense than using a all-one mask since we'd hardly
ever find a match.
There are no other checks for status bits, so if e.g. userspace
sets impossible combinations it will get an empty dump.
If kernel would reject unknown status bits, then a program that works on
a future kernel that has IPS_FOO bit fails on old kernels.
Same for 'impossible' combinations:
Kernel never sets ASSURED without first having set SEEN_REPLY, but its
possible that a future kernel could do so.
Therefore no sanity tests other than a 0-mask.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jason Ekstrand requested a more efficient method than userptr+set-domain
to determine if the userptr object was backed by a complete set of pages
upon creation. To be more efficient than simply populating the userptr
using get_user_pages() (as done by the call to set-domain or execbuf),
we can walk the tree of vm_area_struct and check for gaps or vma not
backed by struct page (VM_PFNMAP). The question is how to handle
VM_MIXEDMAP which may be either struct page or pfn backed...
With discrete we are going to drop support for set_domain(), so offering
a way to probe the pages, without having to resort to dummy batches has
been requested.
v2:
- add new query param for the PROBE flag, so userspace can easily
check if the kernel supports it(Jason).
- use mmap_read_{lock, unlock}.
- add some kernel-doc.
v3:
- In the docs also mention that PROBE doesn't guarantee that the pages
will remain valid by the time they are actually used(Tvrtko).
- Add a small comment for the hole finding logic(Jason).
- Move the param next to all the other params which just return true.
Testcase: igt/gem_userptr_blits/probe
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723113405.427004-1-matthew.auld@intel.com
This transport enables communications with an SCMI platform through virtio;
the SCMI platform will be represented by a virtio device.
Implement an SCMI virtio driver according to the virtio SCMI device spec
[1]. Virtio device id 32 has been reserved for the SCMI device [2].
The virtio transport has one Tx channel (virtio cmdq, A2P channel) and
at most one Rx channel (virtio eventq, P2A channel).
The following feature bit defined in [1] is not implemented:
VIRTIO_SCMI_F_SHARED_MEMORY.
The number of messages which can be pending simultaneously is restricted
according to the virtqueue capacity negotiated at probing time.
As soon as Rx channel message buffers are allocated or have been read
out by the arm-scmi driver, feed them back to the virtio device.
Since some virtio devices may not have the short response time exhibited
by SCMI platforms using other transports, set a generous response
timeout.
SCMI polling mode is not supported by this virtio transport since deemed
meaningless: polling mode operation is offered by the SCMI core to those
transports that could not provide a completion interrupt on the TX path,
which is never the case for virtio whose core callbacks can easily call
into core scmi_rx_callback upon messages reception.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
Link: https://lore.kernel.org/r/20210803131024.40280-16-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Co-developed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: simplified driver logic, changed link_supplier and channel
available/setup logic, removed dummy callbacks ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a control to set intra-refresh period.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket
buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and
tcp_sndbuf_expand()). If we've just created a new socket this adjustment
is enabled on it, but if one changes the socket buffer size by
setsockopt(SO_{SND,RCV}BUF*) it becomes disabled.
CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on
restore as it first needs to increase buffer sizes for packet queues
restore and second it needs to restore back original buffer sizes. So
after CRIU restore all sockets become non-auto-adjustable, which can
decrease network performance of restored applications significantly.
CRIU need to be able to restore sockets with enabled/disabled adjustment
to the same state it was before dump, so let's add special setsockopt
for it.
Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so
that using these interface one can reenable automatic socket buffer
adjustment on their sockets.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmEKaBUTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqSvgCACpR64hydl7/qt9QGnm9Ym6/v/L9y9v
aBfZMQsedP1GSuev5PpxghXU4GF0LXiDr6ryr0hhu7w2ojjlLNl9sVHCF9qdAJKz
x2D4YTlxct2KuPBdhWllQr/KWFbJh2IzarHEWzdo+QoU5A8jDlsK2kLeeikFECzT
fVUe3mu1k66/DvHsetsfzIvbUkuHk2SPpK/pwrUC6Siw6wQZBHlSoUEtBNwEPlyH
8+ZQJPqtrjr2v3mZUOkgHrlXEOZRu6OM3i1Yv2bn2x4VI+3KQHEw/cA1WNE2AOzN
CfMp4sS98QdCrAboX4VJZpGAbziTFHedqFjjIP9ultCfH9ROHhQj4Zsl
=37wt
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.15-20210804' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-08-04
this is a pull request of 5 patches for net-next/master.
The first patch is by me and fixes a typo in a comment in the CAN
J1939 protocol.
The next 2 patches are by Oleksij Rempel and update the CAN J1939
protocol to send RX status updates via the error queue mechanism.
The next patch is by me and adds a missing variable initialization to
the flexcan driver (the problem was introduced in the current net-next
cycle).
The last patch is by Aswath Govindraju and adds power-domains to the
Bosch m_can DT binding documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To be able to create applications with user friendly feedback, we need be
able to provide receive status information.
Typical ETP transfer may take seconds or even hours. To give user some
clue or show a progress bar, the stack should push status updates.
Same as for the TX information, the socket error queue will be used with
following new signals:
- J1939_EE_INFO_RX_RTS - received and accepted request to send signal.
- J1939_EE_INFO_RX_DPO - received data package offset signal
- J1939_EE_INFO_RX_ABORT - RX session was aborted
Instead of completion signal, user will get data package.
To activate this signals, application should set
SOF_TIMESTAMPING_RX_SOFTWARE to the SO_TIMESTAMPING socket option. This
will avoid unpredictable application behavior for the old software.
Link: https://lore.kernel.org/r/20210707094854.30781-3-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When running command pipelining for WRITE direction commands (e.g. tape
device write), userspace sends cmd completion to cmd ring before processing
write data. In that case userspace has to copy data before sending
completion, because cmd completion also implicitly releases the data buffer
in data area.
The new feature KEEP_BUF allows userspace to optionally keep the buffer
after completion by setting new bit TCMU_UFLAG_KEEP_BUF in
tcmu_cmd_entry_hdr->uflags. In that case buffer has to be released
explicitly by writing the cmd_id to new action item free_kept_buf.
All kept buffers are released during reset_ring and if userspace closes uio
device (tcmu_release).
Link: https://lore.kernel.org/r/20210713175021.20103-1-bostroesser@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
Note, the LACPDU state frames still will be sent when init or unbind port.
v2: remove module parameter
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
systemd added a modified copy of include/linux/ioprio.h into its
code to get the relevant content definitions for the exposed
ioprio_[get|set] system calls.
Move the user space relevant ioprio bits to the UAPI includes to be
able to use the ioprio_[get|set] syscalls as intended.
Cc: Kay Sievers <kay@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20210714195655.181943-1-socketcan@hartkopp.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged:
$ pahole -C ip_msfilter net/ipv4/ip_sockglue.o
struct ip_msfilter {
union {
struct {
__be32 imsf_multiaddr_aux; /* 0 4 */
__be32 imsf_interface_aux; /* 4 4 */
__u32 imsf_fmode_aux; /* 8 4 */
__u32 imsf_numsrc_aux; /* 12 4 */
__be32 imsf_slist[1]; /* 16 4 */
}; /* 0 20 */
struct {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 0 16 */
}; /* 0 20 */
/* size: 20, cachelines: 1, members: 1 */
/* last cacheline: 20 bytes */
};
Also, refactor the code accordingly and make use of the struct_size()
and flex_array_size() helpers.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not obvious what the fields mean and how they should be used.
The most important detail is the link to drm_property.flags, which
describes how property types work.
v2: document enum drm_mode_property_enum, add ref to "Modeset Base
Object Abstraction" (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802072826.500078-1-contact@emersion.fr
TC action ->init() API has 10 parameters, it becomes harder
to read. Some of them are just boolean and can be replaced
by flags. Similarly for the internal API tcf_action_init()
and tcf_exts_validate().
This patch converts them to flags and fold them into
the upper 16 bits of "flags", whose lower 16 bits are still
reserved for user-space. More specifically, the following
kernel flags are introduced:
TCA_ACT_FLAGS_POLICE replace 'name' in a few contexts, to
distinguish whether it is compatible with policer.
TCA_ACT_FLAGS_BIND replaces 'bind', to indicate whether
this action is bound to a filter.
TCA_ACT_FLAGS_REPLACE replaces 'ovr' in most contexts,
means we are replacing an existing action.
TCA_ACT_FLAGS_NO_RTNL replaces 'rtnl_held' but has the
opposite meaning, because we still hold RTNL in most
cases.
The only user-space flag TCA_ACT_FLAGS_NO_PERCPU_STATS is
untouched and still stored as before.
I have tested this patch with tdc and I do not see any
failure related to this patch.
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An early pull for v5.15 (there'll be more coming in a week or two),
consisting of the drm/scheduler conversion and a couple other small
series that one was based one. Mostly sending this now because IIUC
danvet wanted it in drm-next so he could rebase on it. (Daniel, if
you disagree then speak up, and I'll instead include this in the main
pull request once that is ready.)
This also has a core patch to drop drm_gem_object_put_locked() now
that the last use of it is removed.
[airlied: add NULL to drm_sched_init]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGumRk7H88bqV=H9Fb1SM0zPBo5B7NsCU3jFFKBYxf5k+Q@mail.gmail.com
Currently we have a compile-time default network
(MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field
on the net namespace, allowing future configuration for new interfaces.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds the infrastructure for managing MCTP netdevices; we add
a pointer to the AF_MCTP-specific data to struct netdevice, and hook up
the rtnetlink operations for adding and removing addresses.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an empty drivers/net/mctp/, for future interface drivers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces the user-visible MCTP header, containing the
protocol-specific addressing definitions.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to check up->dirmask to avoid shift-out-of-bounce bug,
since up->dirmask comes from userspace.
Also, added XFRM_USERPOLICY_DIRMASK_MAX constant to uapi to inform
user-space that up->dirmask has maximum possible value
Fixes: 2d151d3907 ("xfrm: Add possibility to set the default to block if we have no policy")
Reported-and-tested-by: syzbot+9cd5837a045bbee5b810@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Allow the user program to specify both ASYNC and SYNC TCF modes by
repurposing the existing constants as bitfields. This will allow the
kernel to select one of the modes on behalf of the user program. With
this patch the kernel will always select async mode, but a subsequent
patch will make this configurable.
Link: https://linux-review.googlesource.com/id/Icc5923c85a8ea284588cc399ae74fd19ec291230
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210727205300.2554659-3-pcc@google.com
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This file was given GPL-2.0 license. But LGPL-2.1 makes more sense
as it needs to be used by libraries outside of the kernel source tree.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The drm/scheduler provides additional prioritization on top of that
provided by however many number of ringbuffers (each with their own
priority level) is supported on a given generation. Expose the
additional levels of priority to userspace and map the userspace
priority back to ring (first level of priority) and schedular priority
(additional priority levels within the ring).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-13-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Enabling device and wq returns standard errno and that does not provide
enough details to indicate what exactly failed. The hardware command status
is only 8bits. Expand the command status to 32bits and use the upper 16
bits to define software errors to provide more details on the exact
failure. Bit 31 will be used to indicate the error is software set as the
driver is using some of the spec defined hardware error as well.
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373579.1968485.5891788397526827892.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, when doing rate limiting using the tc-police(8) action, the
easiest way is to simply drop the packets which exceed or conform the
configured bandwidth limit. Add a new option to tc-skbmod(8), so that
users may use the ECN [1] extension to explicitly inform the receiver
about the congestion instead of dropping packets "on the floor".
The 2 least significant bits of the Traffic Class field in IPv4 and IPv6
headers are used to represent different ECN states [2]:
0b00: "Non ECN-Capable Transport", Non-ECT
0b10: "ECN Capable Transport", ECT(0)
0b01: "ECN Capable Transport", ECT(1)
0b11: "Congestion Encountered", CE
As an example:
$ tc filter add dev eth0 parent 1: protocol ip prio 10 \
matchall action skbmod ecn
Doing the above marks all ECT(0) and ECT(1) packets as CE. It does NOT
affect Non-ECT or non-IP packets. In the tc-police scenario mentioned
above, users may pipe a tc-police action and a tc-skbmod "ecn" action
together to achieve ECN-based rate limiting.
For TCP connections, upon receiving a CE packet, the receiver will respond
with an ECE packet, asking the sender to reduce their congestion window.
However ECN also works with other L4 protocols e.g. DCCP and SCTP [2], and
our implementation does not touch or care about L4 headers.
The updated tc-skbmod SYNOPSIS looks like the following:
tc ... action skbmod { set SETTABLE | swap SWAPPABLE | ecn } ...
Only one of "set", "swap" or "ecn" shall be used in a single tc-skbmod
command. Trying to use more than one of them at a time is considered
undefined behavior; pipe multiple tc-skbmod commands together instead.
"set" and "swap" only affect Ethernet packets, while "ecn" only affects
IPv{4,6} packets.
It is also worth mentioning that, in theory, the same effect could be
achieved by piping a "police" action and a "bpf" action using the
bpf_skb_ecn_set_ce() helper, but this requires eBPF programming from the
user, thus impractical.
Depends on patch "net/sched: act_skbmod: Skip non-Ethernet packets".
[1] https://datatracker.ietf.org/doc/html/rfc3168
[2] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the existing PR_GET/SET_SPECULATION_CTRL API to expose the L1D flush
capability. For L1D flushing PR_SPEC_FORCE_DISABLE and
PR_SPEC_DISABLE_NOEXEC are not supported.
Enabling L1D flush does not check if the task is running on an SMT enabled
core, rather a check is done at runtime (at the time of flush), if the task
runs on a SMT sibling then the task is sent a SIGBUS which is executed
before the task returns to user space or to a guest.
This is better than the other alternatives of:
a. Ensuring strict affinity of the task (hard to enforce without further
changes in the scheduler)
b. Silently skipping flush for tasks that move to SMT enabled cores.
Hook up the core prctl and implement the x86 specific parts which in turn
makes it functional.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210108121056.21940-5-sblbir@amazon.com
Implement a simple static mapping algorithm of the i915 priority levels
(int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as
follows:
i915 level < 0 -> GuC low level (3)
i915 level == 0 -> GuC normal level (2)
i915 level < INT_MAX -> GuC high level (1)
i915 level == INT_MAX -> GuC highest level (0)
We believe this mapping should cover the UMD use cases (3 distinct user
levels + 1 kernel level).
In addition to static mapping, a simple counter system is attached to
each context tracking the number of requests inflight on the context at
each level. This is needed as the GuC levels are per context while in
the i915 levels are per request.
v2:
(Daniele)
- Add BUILD_BUG_ON to enforce ordering of priority levels
- Add missing lockdep to guc_prio_fini
- Check for return before setting context registered flag
- Map DISPLAY priority or higher to highest guc prio
- Update comment for guc_prio
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com
- Many more irdma fixups from bots/etc
- bnxt_re regression in their counters from a FW upgrade
- User triggerable memory leak in rxe
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmD/PpEACgkQOG33FX4g
mxouhBAAgpjHUgALVAcYPyqXyAqr9KLIv6HB79OWP5W8I+XDDAbedoIJy3FWWm1d
z5l0kBwUCH216KyNrXlikqBM61dluA8N9J7lPCMOolU0dLMaC0MeXCBir2VV4NU9
lSVasmrBPnZFWk38VgTC4rZr4lt+JLyKYwg7BBozCoDhcX/TuYv2HFB9YCJ9Vv+D
u50K1Aj7/fhXfInDuIcICHfvE0d2YaN0+apEQ/Mk11vVGcxxjv/mYraGyFqZkN0M
6yuNZXXIPj9x/gPY8kWp4mBipY6W/cnjLzUEeKQem2rOXpS1baxK9PZlW+X8qlMq
P+9s6EGuxDWcYfU1VuTBwmuM91/kKch6nYtmhHPTv0Wrk/fFZpXM8kD+mi8Vbg4c
aE+0DfpLLnpyu8/BKNmO7s0STT2Ea0VCrlWlGwjg93Y53qCwFsexg/HXO27U8DS2
m2f0DKuGvIHlaUW7OaNADmAzpQ3NikVohBL9hAApNbgjBN8xrifSGdiuUbJ6MU0l
a207yVSQUc96eS+fDJRAngUgYEoO9o1JVeHXGaMs6Rwpu5iSHk1wpQTcQ7vTSeJP
CNjPWAoFe/Jv/S4r0E2s43u0ajV22G6NyWVUQ+eIb8BD5J7fTDn6466vnH8RyQNY
OgwXaYnoadC27SDVr9o6LyLNJYyqUnA1nmZcLFl8gE0LenxyldU=
=g54k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing very exciting here, mainly just a bunch of irdma fixes. irdma
is a new driver this cycle so it to be expected.
- Many more irdma fixups from bots/etc
- bnxt_re regression in their counters from a FW upgrade
- User triggerable memory leak in rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Change returned type of irdma_setup_virt_qp to void
RDMA/irdma: Change the returned type of irdma_set_hw_rsrc to void
RDMA/irdma: change the returned type of irdma_sc_repost_aeq_entries to void
RDMA/irdma: Check vsi pointer before using it
RDMA/rxe: Fix memory leak in error path code
RDMA/irdma: Change the returned type to void
RDMA/irdma: Make spdxcheck.py happy
RDMA/irdma: Fix unused variable total_size warning
RDMA/bnxt_re: Fix stats counters
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120. This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.
For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable. Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.
Lower the default receive interrupt trigger level to 32 then, and make
it configurable. Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].
References:
[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
Levels", p. 22
[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously a sharing group (shared and master ids pair) can be only
inherited when mount is created via bindmount. This patch adds an
ability to add an existing private mount into an existing sharing group.
With this functionality one can first create the desired mount tree from
only private mounts (without the need to care about undesired mount
propagation or mount creation order implied by sharing group
dependencies), and next then setup any desired mount sharing between
those mounts in tree as needed.
This allows CRIU to restore any set of mount namespaces, mount trees and
sharing group trees for a container.
We have many issues with restoring mounts in CRIU related to sharing
groups and propagation:
- reverse sharing groups vs mount tree order requires complex mounts
reordering which mostly implies also using some temporary mounts
(please see https://lkml.org/lkml/2021/3/23/569 for more info)
- mount() syscall creates tons of mounts due to propagation
- mount re-parenting due to propagation
- "Mount Trap" due to propagation
- "Non Uniform" propagation, meaning that with different tricks with
mount order and temporary children-"lock" mounts one can create mount
trees which can't be restored without those tricks
(see https://www.linuxplumbersconf.org/event/7/contributions/640/)
With this new functionality we can resolve all the problems with
propagation at once.
Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Update the static assertions about siginfo_t to also describe
it's alignment and size.
While investigating if it was possible to add a 64bit field into
siginfo_t[1] it became apparent that the alignment of siginfo_t
is as much a part of the ABI as the size of the structure.
If the alignment changes siginfo_t when embedded in another structure
can move to a different offset. Which is not acceptable from an ABI
structure.
So document that fact and add static assertions to notify developers
if they change change the alignment by accident.
[1] https://lkml.kernel.org/r/YJEZdhe6JGFNYlum@elver.google.com
Acked-by: Marco Elver <elver@google.com>
v1: https://lkml.kernel.org/r/20210505141101.11519-4-ebiederm@xmission.co
Link: https://lkml.kernel.org/r/875yxaxmyl.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Arm Fixed Rate Compression (AFRC) is a proprietary fixed rate image
compression protocol and format.
It is designed to provide guaranteed bandwidth and memory footprint
reductions in graphics and media use-cases.
This patch aims to add modifier definitions for describing
AFRC.
Signed-off-by: Normunds Rieksts <normunds.rieksts@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170709.39922-1-normunds.rieksts@arm.com
The CPU domain should be static for discrete, and on DG1 we don't need
any flushing since everything is already coherent, so really all this
does is an object wait, for which we have an ioctl. Longer term the
desired caching should be an immutable creation time property for the
BO, which can be set with something like gem_create_ext.
One other user is iris + userptr, which uses the set_domain to probe all
the pages to check if the GUP succeeds, however we now have a PROBE
flag for this purpose.
v2: add some more kernel doc, also add the implicit rules with caching
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
-----BEGIN PGP SIGNATURE-----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=BUya
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
The FIXED mapping is only used for ttm, and tells userspace that the
mapping type is pre-defined. This disables the other type of mmap
offsets when discrete memory is used, so fix the selftests as well.
Document the struct as well, so it shows up in docbook.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mauld: Included minor fixes from the review comments]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714122833.766586-1-maarten.lankhorst@linux.intel.com
Add support for the IOAM inline insertion (only for the host-to-host use case)
which is per-route configured with lightweight tunnels. The target is iproute2
and the patch is ready. It will be posted as soon as this patchset is merged.
Here is an overview:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace type 0x800000 ns 1 size 12 dev eth0
This example configures an IOAM Pre-allocated Trace option attached to the
fc00::1/128 prefix. The IOAM namespace (ns) is 1, the size of the pre-allocated
trace data block is 12 octets (size) and only the first IOAM data (bit 0:
hop_limit + node id) is included in the trace (type) represented as a bitfield.
The reason why the in-transit (IPv6-in-IPv6 encapsulation) use case is not
implemented is explained on the patchset cover.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Generic Netlink commands to allow userspace to configure IOAM
namespaces and schemas. The target is iproute2 and the patch is ready.
It will be posted as soon as this patchset is merged. Here is an overview:
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for processing the IOAM Pre-allocated Trace with IPv6,
see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3].
A new per-interface sysctl is introduced. The value is a boolean to accept (=1)
or ignore (=0, by default) IPv6 IOAM options on ingress for an interface:
- net.ipv6.conf.XXX.ioam6_enabled
Two other sysctls are introduced to define IOAM IDs, represented by an integer.
They are respectively per-namespace and per-interface:
- net.ipv6.ioam6_id
- net.ipv6.conf.XXX.ioam6_id
The value of the first one represents the IOAM ID of the node itself (u32; max
and default value = U32_MAX>>8, due to hop limit concatenation) while the other
represents the IOAM ID of an interface (u16; max and default value = U16_MAX).
Each "ioam6_id" sysctl has a "_wide" equivalent:
- net.ipv6.ioam6_id_wide
- net.ipv6.conf.XXX.ioam6_id_wide
The value of the first one represents the wide IOAM ID of the node itself (u64;
max and default value = U64_MAX>>8, due to hop limit concatenation) while the
other represents the wide IOAM ID of an interface (u32; max and default value
= U32_MAX).
The use of short and wide equivalents is not exclusive, a deployment could
choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format)
could be an identifier for a physical interface, whereas
net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a
logical sub-interface. Documentation about new sysctls is provided at the end
of this patchset.
Two relativistic hash tables are used: one for IOAM namespaces, the other for
IOAM schemas. A namespace can only have a single active schema and a schema
can only be attached to a single namespace (1:1 relationship).
[1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options
[2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data
[3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch provides the IPv6 IOAM option header [1] as well as the IOAM
Trace header [2]. An IOAM option must be 4n-aligned. Here is an overview of
a Hop-by-Hop with an IOAM Trace option:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next header | Hdr Ext Len | Padding | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option Type | Opt Data Len | Reserved | IOAM Type |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Namespace-ID | NodeLen | Flags | RemainingLen|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IOAM-Trace-Type | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
| | |
| node data [n] | |
| | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ D
| | a
| node data [n-1] | t
| | a
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
~ ... ~ S
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ p
| | a
| node data [1] | c
| | e
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | |
| node data [0] | |
| | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
The IOAM option header starts at "Option Type" and ends after "IOAM
Type". The IOAM Trace header starts at "Namespace-ID" and ends after
"IOAM-Trace-Type/Reserved".
IOAM Type: either Pre-allocated Trace (=0), Incremental Trace (=1),
Proof-of-Transit (=2) or Edge-to-Edge (=3). Note that both the
Pre-allocated Trace and the Incremental Trace look the same. The two
others are not implemented.
Namespace-ID: IOAM namespace identifier, not to be confused with network
namespaces. It adds further context to IOAM options and associated data,
and allows devices which are IOAM capable to determine whether IOAM
options must be processed or ignored. It can also be used by an operator
to distinguish different operational domains or to identify different
sets of devices.
NodeLen: Length of data added by each node. It depends on the Trace
Type.
Flags: Only the Overflow (O) flag for now. The O flag is set by a
transit node when there are not enough octets left to record its data.
RemainingLen: Remaining free space to record data.
IOAM-Trace-Type: Bit field where each bit corresponds to a specific kind
of IOAM data. See [2] for a detailed list.
[1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options
[2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the default we assume the traffic to pass, if we have no
matching IPsec policy. With this patch, we have a possibility to
change this default from allow to block. It can be configured
via netlink. Each direction (input/output/forward) can be
configured separately. With the default to block configuered,
we need allow policies for all packet flows we accept.
We do not use default policy lookup for the loopback device.
v1->v2
- fix compiling when XFRM is disabled
- Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Christian Langrock <christian.langrock@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmDxaBwACgkQ/lWMcqZw
E8PBYRAAsZgmuQU1urEsDTL931jWoJ8zxHpxSLow8ZtplembyhloGeRXRmGT8erd
ocw1wAzm0UajbFLvv50XW5N4jPnsn9IBRQVhfNNc06g4OH6qy17PPAA+clHaBJrf
BFiAcK4rzmUet3+6335ko/OvkD5er0s7ipNljxgB7FkIwP3gh3NEFG0yFcpFpxF4
fzT5Wz5vMW++XUCXZHMX+vBMjFP2AosxLVvsnxpM/48dyFWTiYRg7jhy5bICKYBM
3GdRj2e1wm3cAsZISbqtDpXSlstIw6u0w+BB6ryQvD/K5nPTqydE/YMOB85DUWLg
Sp1tijxM/KtOyC5w/IpDLkf9X24KAIcu0eKffUGbkLvIkP5cSyibelOtZBG6Jmln
AubXpgi4+mGVyYvMEVngHyrY2tW/rtpNGr/g9To9hYVHKkdRZUtolQk7KgtdV7v3
pFq60AilYTENJthkjCRoTi66BsocpaJfQOyppp6uD8/a0Spxfrq5tM+POWNylqxB
70L2ObvM4Xx51GI0ziCZQwkMp2Uzwosr+6CdbrzQKaxxpbQEcr3frkv6cap5V0WY
lnYgFw3dbA/Ga6YsnInQ87KmF4svnaWB2z/KzfnBF5pNrwoR9/4K5k7Vfb3P9YyN
w+nrfeHto0r768PjC/05uyD9diDuHOw3RHtljf/C4klBNRDDovU=
=x8Eo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
The V3D engine has several hardware performance counters that can of
interest for userspace performance analysis tools.
This exposes new ioctls to create and destroy performance monitor
objects, as well as to query the counter values.
Each created performance monitor object has an ID that can be attached
to CL/CSD submissions, so the driver enables the requested counters when
the job is submitted, and updates the performance monitor values when
the job is done.
It is up to the user to ensure all the jobs have been finished before
getting the performance monitor values. It is also up to the user to
properly synchronize BCL jobs when submitting jobs with different
performance monitors attached.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com
DCS is an offload to SW load balancing of DC initiator work requests.
A single DCI can be connected to only one target at the time and can't
start new connection until the previous work request is completed. This
limitation will cause to delay when the initiator process needs to
transfer data to multiple targets at the same time. The SW solution is to
use a process that handling and spreading the work request on many DCIs
according to destinations.
This feature is an offload to this process and coming to reduce the load
from the CPU and improve the performance.
Link: https://lore.kernel.org/r/491c2c2afdb5b07de7f03eab3f93cf0704549dbc.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new global vlan option which controls whether multicast snooping
is enabled or disabled for a single vlan. It controls the vlan private
flag: BR_VLFLAG_GLOBAL_MCAST_ENABLED.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new vlan options dump flag which causes only global vlan options
to be dumped. The dumps are done only with bridge devices, ports are
ignored. They support vlan compression if the options in sequential
vlans are equal (currently always true).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can have two types of vlan options depending on context:
- per-device vlan options (split in per-bridge and per-port)
- global vlan options
The second type wasn't supported in the bridge until now, but we need
them for per-vlan multicast support, per-vlan STP support and other
options which require global vlan context. They are contained in the global
bridge vlan context even if the vlan is not configured on the bridge device
itself. This patch adds initial netlink attributes and support for setting
these global vlan options, they can only be set (RTM_NEWVLAN) and the
operation must use the bridge device. Since there are no such options yet
it shouldn't have any functional effect.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the port multicast context to check if the router port is a vlan and
in case it is include its vlan id in the notification.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a global knob that controls if vlan multicast snooping is enabled.
The proper contexts (vlan or bridge-wide) will be chosen based on the knob
when processing packets and changing bridge device state. Note that
vlans have their individual mcast snooping enabled by default, but this
knob is needed to turn on bridge vlan snooping. It is disabled by
default. To enable the knob vlan filtering must also be enabled, it
doesn't make sense to have vlan mcast snooping without vlan filtering
since that would lead to inconsistencies. Disabling vlan filtering will
also automatically disable vlan mcast snooping.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's a noop on DG1, and in the future when need to support other devices
which let us control the coherency, then it should be an immutable
creation time property for the BO. This will likely be controlled
through a new gem_create_ext extension.
v2: add some kernel doc for the discrete changes, and document the
implicit rules
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-2-matthew.auld@intel.com
The Open vSwitch kernel module uses the upcall mechanism to send
packets from kernel space to user space when it misses in the kernel
space flow table. The upcall sends packets via a Netlink socket.
Currently, a Netlink socket is created for every vport. In this way,
there is a 1:1 mapping between a vport and a Netlink socket.
When a packet is received by a vport, if it needs to be sent to
user space, it is sent via the corresponding Netlink socket.
This mechanism, with various iterations of the corresponding user
space code, has seen some limitations and issues:
* On systems with a large number of vports, there is a correspondingly
large number of Netlink sockets which can limit scaling.
(https://bugzilla.redhat.com/show_bug.cgi?id=1526306)
* Packet reordering on upcalls.
(https://bugzilla.redhat.com/show_bug.cgi?id=1844576)
* A thundering herd issue.
(https://bugzilla.redhat.com/show_bug.cgi?id=1834444)
This patch introduces an alternative, feature-negotiated, upcall
mode using a per-cpu dispatch rather than a per-vport dispatch.
In this mode, the Netlink socket to be used for the upcall is
selected based on the CPU of the thread that is executing the upcall.
In this way, it resolves the issues above as:
a) The number of Netlink sockets scales with the number of CPUs
rather than the number of vports.
b) Ordering per-flow is maintained as packets are distributed to
CPUs based on mechanisms such as RSS and flows are distributed
to a single user space thread.
c) Packets from a flow can only wake up one user space thread.
The corresponding user space code can be found at:
https://mail.openvswitch.org/pipermail/ovs-dev/2021-July/385139.html
Bugzilla: https://bugzilla.redhat.com/1844576
Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_KPROBE programs,
so it's now possible to call bpf_get_func_ip from both kprobe and
kretprobe programs.
Taking the caller's address from 'struct kprobe::addr', which is
defined for both kprobe and kretprobe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-5-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs,
specifically for all trampoline attach types.
The trampoline's caller IP address is stored in (ctx - 8) address.
so there's no reason to actually call the helper, but rather fixup
the call instruction and return [ctx - 8] value directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-4-jolsa@kernel.org
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded
in hash/array/lru maps as a regular field and helpers to operate on it:
// Initialize the timer.
// First 4 bits of 'flags' specify clockid.
// Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags);
// Configure the timer to call 'callback_fn' static function.
long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn);
// Arm the timer to expire 'nsec' nanoseconds from the current time.
long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags);
// Cancel the timer and wait for callback_fn to finish if it was running.
long bpf_timer_cancel(struct bpf_timer *timer);
Here is how BPF program might look like:
struct map_elem {
int counter;
struct bpf_timer timer;
};
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__uint(max_entries, 1000);
__type(key, int);
__type(value, struct map_elem);
} hmap SEC(".maps");
static int timer_cb(void *map, int *key, struct map_elem *val);
/* val points to particular map element that contains bpf_timer. */
SEC("fentry/bpf_fentry_test1")
int BPF_PROG(test1, int a)
{
struct map_elem *val;
int key = 0;
val = bpf_map_lookup_elem(&hmap, &key);
if (val) {
bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME);
bpf_timer_set_callback(&val->timer, timer_cb);
bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0);
}
}
This patch adds helper implementations that rely on hrtimers
to call bpf functions as timers expire.
The following patches add necessary safety checks.
Only programs with CAP_BPF are allowed to use bpf_timer.
The amount of timers used by the program is constrained by
the memcg recorded at map creation time.
The bpf_timer_init() helper needs explicit 'map' argument because inner maps
are dynamic and not known at load time. While the bpf_timer_set_callback() is
receiving hidden 'aux->prog' argument supplied by the verifier.
The prog pointer is needed to do refcnting of bpf program to make sure that
program doesn't get freed while the timer is armed. This approach relies on
"user refcnt" scheme used in prog_array that stores bpf programs for
bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is
paired with bpf_timer_cancel() that will drop the prog refcnt. The
ops->map_release_uref is responsible for cancelling the timers and dropping
prog refcnt when user space reference to a map reaches zero.
This uref approach is done to make sure that Ctrl-C of user space process will
not leave timers running forever unless the user space explicitly pinned a map
that contained timers in bpffs.
bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't
have user references (is not held by open file descriptor from user space and
not pinned in bpffs).
The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel
and free the timer if given map element had it allocated.
"bpftool map update" command can be used to cancel timers.
The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because
'__u64 :64' has 1 byte alignment of 8 byte padding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-4-alexei.starovoitov@gmail.com
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets
in subflow receive buffers longer than necessary, delaying
MPTCP-level ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
- netfilter: conntrack: do not mark RST in the reply direction coming
after SYN packet for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison
-----BEGIN PGP SIGNATURE-----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=QFnb
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
Convert all the drm_i915_gem_set_domain bits to proper kernel doc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-4-matthew.auld@intel.com
Convert all the drm_i915_gem_caching bits to proper kernel doc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-2-matthew.auld@intel.com
Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"
Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The bdflush system call has been deprecated for a very long time.
Recently Michael Schmitz tested[1] and found that the last known
caller of of the bdflush system call is unaffected by it's removal.
Since the code is not needed delete it.
[1] https://lkml.kernel.org/r/36123b5d-daa0-6c2b-f2d4-a942f069fd54@gmail.com
Link: https://lkml.kernel.org/r/87sg10quue.fsf_-_@disp2133
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Commit 48d6b3336a ("RDMA/irdma: Add ABI definitions") adds
./include/uapi/rdma/irdma-abi.h with an additional unneeded closing
bracket at the end of the SPDX-License-Identifier line.
Hence, ./scripts/spdxcheck.py complains:
include/uapi/rdma/irdma-abi.h: 1:77 Syntax error: )
Remove that closing bracket to make spdxcheck.py happy.
Fixes: 48d6b3336a ("RDMA/irdma: Add ABI definitions")
Link: https://lore.kernel.org/r/20210701104127.1877-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix typo in a define: CEC_OP_REC_SEQ_SATERDAY -> CEC_OP_REC_SEQ_SATURDAY
This isn't used yet in actual applications to the best of my knowledge,
and it certainly doesn't break the ABI since the value doesn't change.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gHse
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
Doorbell remapping for ifcvf, mlx5.
virtio_vdpa support for mlx5.
Validate device input in several drivers (for SEV and friends).
ZONE_MOVABLE aware handling in virtio-mem.
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmDm5jQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp6mYIAMTk5ggM5xdt6NCAASAigssEAoCTMorfoxkx
i7O562TEejgLvYKx/EZnYF+YpmYGyWEY9AgxMPxP/nPRLszuf0nZSmMp5ivu/vMz
zwpAto+7RpUmIQP+N6QjWabiWrpQI9EnXA47kOnyU703Y+RnITPNCvD1PpnDG3zs
W2GdH7DKqwsCY22hB+zboH2D6HNf3gTuUtgUBYbdBnYVxdOsSd1dx9Te0EKUTV3y
uvENmFEcushDRYpUhAsZm4bKcLOn+6rgNGXuXNa4R/hUlJTwrQjGmzu+ua6vfMwF
dcGxdaeMJUo8o0C1Pz7wJBXF5UZXQlxoyBP+0b0ZTm69AwmIHMY=
=o6A1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio,vhost,vdpa updates from Michael Tsirkin:
- Doorbell remapping for ifcvf, mlx5
- virtio_vdpa support for mlx5
- Validate device input in several drivers (for SEV and friends)
- ZONE_MOVABLE aware handling in virtio-mem
- Misc fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-mem: prioritize unplug from ZONE_MOVABLE in Big Block Mode
virtio-mem: simplify high-level unplug handling in Big Block Mode
virtio-mem: prioritize unplug from ZONE_MOVABLE in Sub Block Mode
virtio-mem: simplify high-level unplug handling in Sub Block Mode
virtio-mem: simplify high-level plug handling in Sub Block Mode
virtio-mem: use page_zonenum() in virtio_mem_fake_offline()
virtio-mem: don't read big block size in Sub Block Mode
virtio/vdpa: clear the virtqueue state during probe
vp_vdpa: allow set vq state to initial state after reset
virtio-pci library: introduce vp_modern_get_driver_features()
vdpa: support packed virtqueue for set/get_vq_state()
virtio-ring: store DMA metadata in desc_extra for split virtqueue
virtio: use err label in __vring_new_virtqueue()
virtio_ring: introduce virtqueue_desc_add_split()
virtio_ring: secure handling of mapping errors
virtio-ring: factor out desc_extra allocation
virtio_ring: rename vring_desc_extra_packed
virtio-ring: maintain next in extra state for packed virtqueue
vdpa/mlx5: Clear vq ready indication upon device reset
vdpa/mlx5: Add support for doorbell bypassing
...
- Support for optimized routines based on the host CPU
- Support for PCI via virtio
- Various fixes
-----BEGIN PGP SIGNATURE-----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=wAww
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Support for optimized routines based on the host CPU
- Support for PCI via virtio
- Various fixes
* tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: remove unneeded semicolon in um_arch.c
um: Remove the repeated declaration
um: fix error return code in winch_tramp()
um: fix error return code in slip_open()
um: Fix stack pointer alignment
um: implement flush_cache_vmap/flush_cache_vunmap
um: add a UML specific futex implementation
um: enable the use of optimized xor routines in UML
um: Add support for host CPU flags and alignment
um: allow not setting extra rpaths in the linux binary
um: virtio/pci: enable suspend/resume
um: add PCI over virtio emulation driver
um: irqs: allow invoking time-travel handler multiple times
um: time-travel/signals: fix ndelay() in interrupt
um: expose time-travel mode to userspace side
um: export signals_enabled directly
um: remove unused smp_sigio_handler() declaration
lib: add iomem emulation (logic_iomem)
um: allow disabling NO_IOMEM
Pull yet more updates from Andrew Morton:
"54 patches.
Subsystems affected by this patch series: lib, mm (slub, secretmem,
cleanups, init, pagemap, and mremap), and debug"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (54 commits)
powerpc/mm: enable HAVE_MOVE_PMD support
powerpc/book3s64/mm: update flush_tlb_range to flush page walk cache
mm/mremap: allow arch runtime override
mm/mremap: hold the rmap lock in write mode when moving page table entries.
mm/mremap: use pmd/pud_poplulate to update page table entries
mm/mremap: don't enable optimized PUD move if page table levels is 2
mm/mremap: convert huge PUD move to separate helper
selftest/mremap_test: avoid crash with static build
selftest/mremap_test: update the test to handle pagesize other than 4K
mm: rename p4d_page_vaddr to p4d_pgtable and make it return pud_t *
mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *
kdump: use vmlinux_build_id to simplify
buildid: fix kernel-doc notation
buildid: mark some arguments const
scripts/decode_stacktrace.sh: indicate 'auto' can be used for base path
scripts/decode_stacktrace.sh: silence stderr messages from addr2line/nm
scripts/decode_stacktrace.sh: support debuginfod
x86/dumpstack: use %pSb/%pBb for backtrace printing
arm64: stacktrace: use %pSb for backtrace printing
module: add printk formats to add module build ID to stacktraces
...
Introduce "memfd_secret" system call with the ability to create memory
areas visible only in the context of the owning process and not mapped not
only to other processes but in the kernel page tables as well.
The secretmem feature is off by default and the user must explicitly
enable it at the boot time.
Once secretmem is enabled, the user will be able to create a file
descriptor using the memfd_secret() system call. The memory areas created
by mmap() calls from this file descriptor will be unmapped from the kernel
direct map and they will be only mapped in the page table of the processes
that have access to the file descriptor.
Secretmem is designed to provide the following protections:
* Enhanced protection (in conjunction with all the other in-kernel
attack prevention systems) against ROP attacks. Seceretmem makes
"simple" ROP insufficient to perform exfiltration, which increases the
required complexity of the attack. Along with other protections like
the kernel stack size limit and address space layout randomization which
make finding gadgets is really hard, absence of any in-kernel primitive
for accessing secret memory means the one gadget ROP attack can't work.
Since the only way to access secret memory is to reconstruct the missing
mapping entry, the attacker has to recover the physical page and insert
a PTE pointing to it in the kernel and then retrieve the contents. That
takes at least three gadgets which is a level of difficulty beyond most
standard attacks.
* Prevent cross-process secret userspace memory exposures. Once the
secret memory is allocated, the user can't accidentally pass it into the
kernel to be transmitted somewhere. The secreremem pages cannot be
accessed via the direct map and they are disallowed in GUP.
* Harden against exploited kernel flaws. In order to access secretmem,
a kernel-side attack would need to either walk the page tables and
create new ones, or spawn a new privileged uiserspace process to perform
secrets exfiltration using ptrace.
The file descriptor based memory has several advantages over the
"traditional" mm interfaces, such as mlock(), mprotect(), madvise(). File
descriptor approach allows explicit and controlled sharing of the memory
areas, it allows to seal the operations. Besides, file descriptor based
memory paves the way for VMMs to remove the secret memory range from the
userspace hipervisor process, for instance QEMU. Andy Lutomirski says:
"Getting fd-backed memory into a guest will take some possibly major
work in the kernel, but getting vma-backed memory into a guest without
mapping it in the host user address space seems much, much worse."
memfd_secret() is made a dedicated system call rather than an extension to
memfd_create() because it's purpose is to allow the user to create more
secure memory mappings rather than to simply allow file based access to
the memory. Nowadays a new system call cost is negligible while it is way
simpler for userspace to deal with a clear-cut system calls than with a
multiplexer or an overloaded syscall. Moreover, the initial
implementation of memfd_secret() is completely distinct from
memfd_create() so there is no much sense in overloading memfd_create() to
begin with. If there will be a need for code sharing between these
implementation it can be easily achieved without a need to adjust user
visible APIs.
The secret memory remains accessible in the process context using uaccess
primitives, but it is not exposed to the kernel otherwise; secret memory
areas are removed from the direct map and functions in the
follow_page()/get_user_page() family will refuse to return a page that
belongs to the secret memory area.
Once there will be a use case that will require exposing secretmem to the
kernel it will be an opt-in request in the system call flags so that user
would have to decide what data can be exposed to the kernel.
Removing of the pages from the direct map may cause its fragmentation on
architectures that use large pages to map the physical memory which
affects the system performance. However, the original Kconfig text for
CONFIG_DIRECT_GBPAGES said that gigabyte pages in the direct map "... can
improve the kernel's performance a tiny bit ..." (commit 00d1c5e057
("x86: add gbpages switches")) and the recent report [1] showed that "...
although 1G mappings are a good default choice, there is no compelling
evidence that it must be the only choice". Hence, it is sufficient to
have secretmem disabled by default with the ability of a system
administrator to enable it at boot time.
Pages in the secretmem regions are unevictable and unmovable to avoid
accidental exposure of the sensitive data via swap or during page
migration.
Since the secretmem mappings are locked in memory they cannot exceed
RLIMIT_MEMLOCK. Since these mappings are already locked independently
from mlock(), an attempt to mlock()/munlock() secretmem range would fail
and mlockall()/munlockall() will ignore secretmem mappings.
However, unlike mlock()ed memory, secretmem currently behaves more like
long-term GUP: secretmem mappings are unmovable mappings directly consumed
by user space. With default limits, there is no excessive use of
secretmem and it poses no real problem in combination with
ZONE_MOVABLE/CMA, but in the future this should be addressed to allow
balanced use of large amounts of secretmem along with ZONE_MOVABLE/CMA.
A page that was a part of the secret memory area is cleared when it is
freed to ensure the data is not exposed to the next user of that page.
The following example demonstrates creation of a secret mapping (error
handling is omitted):
fd = memfd_secret(0);
ftruncate(fd, MAP_SIZE);
ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
[1] https://lore.kernel.org/linux-mm/213b4567-46ce-f116-9cdf-bbd0c884eb3c@linux.intel.com/
[akpm@linux-foundation.org: suppress Kconfig whine]
Link: https://lkml.kernel.org/r/20210518072034.31572-5-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This API allows one context to grab bits out of another context upon
creation. It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM. However, it's never been used by any
real userspace. It's used by a few IGT tests and that's it. Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.
There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines. However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace. Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally. It also doesn't add any functionality that the client can't
get in other ways. If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.
v2 (Jason Ekstrand):
- More detailed commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
The idea behind this param is to support OpenCL drivers with relocations
because OpenCL reserves 0x0 for NULL and, if we placed memory there, it
would confuse CL kernels. It was originally sent out as part of a patch
series including libdrm [1] and Beignet [2] support. However, the
libdrm and Beignet patches never landed in their respective upstream
projects so this API has never been used. It's never been used in Mesa
or any other driver, either.
Dropping this API allows us to delete a small bit of code.
[1]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067030.html
[2]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067031.html
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-4-jason@jlekstrand.net
This reverts commit 88be76cdaf ("drm/i915: Allow userspace to specify
ringsize on construction"). This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want. I argue we should drop it for three
reasons:
1. If the compute-runtime PR has sat open for a year, this clearly
isn't that important.
2. It's a very leaky API. Ring size is an implementation detail of the
current execlist scheduler and really only makes sense there. It
can't apply to the older ring-buffer scheduler on pre-execlist
hardware because that's shared across all contexts and it won't
apply to the GuC scheduler that's in the pipeline.
3. Having userspace set a ring size in bytes is a bad solution to the
problem of having too small a ring. There is no way that userspace
has the information to know how to properly set the ring size so
it's just going to detect the feature and always set it to the
maximum of 512K. This is what the compute-runtime PR does. The
scheduler in i915, on the other hand, does have the information to
make an informed choice. It could detect if the ring size is a
problem and grow it itself. Or, if that's too hard, we could just
increase the default size from 16K to 32K or even 64K instead of
relying on userspace to do it.
Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net
Support passing a xdp_md via ctx_in/ctx_out in bpf_attr for
BPF_PROG_TEST_RUN.
The intended use case is to pass some XDP meta data to the test runs of
XDP programs that are used as tail calls.
For programs that use bpf_prog_test_run_xdp, support xdp_md input and
output. Unlike with an actual xdp_md during a non-test run, data_meta must
be 0 because it must point to the start of the provided user data. From
the initial xdp_md, use data and data_end to adjust the pointers in the
generated xdp_buff. All other non-zero fields are prohibited (with
EINVAL). If the user has set ctx_out/ctx_size_out, copy the (potentially
different) xdp_md back to the userspace.
We require all fields of input xdp_md except the ones we explicitly
support to be set to zero. The expectation is that in the future we might
add support for more fields and we want to fail explicitly if the user
runs the program on the kernel where we don't yet support them.
Co-developed-by: Cody Haas <chaas@riotgames.com>
Co-developed-by: Lisa Watanabe <lwatanabe@riotgames.com>
Signed-off-by: Cody Haas <chaas@riotgames.com>
Signed-off-by: Lisa Watanabe <lwatanabe@riotgames.com>
Signed-off-by: Zvi Effron <zeffron@riotgames.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210707221657.3985075-3-zeffron@riotgames.com
- Prevent sigaltstack out of bounds writes. The kernel unconditionally
writes the FPU state to the alternate stack without checking whether
the stack is large enough to accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never been
updated despite the fact that the FPU state which is stored on the
signal stack has grown over time which causes trouble in the field
when AVX512 is available on a CPU. The kernel does not expose the
minimum requirements for the alternate stack size depending on the
available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well
- A major cleanup of the x86 FPU code. The recent discoveries of XSTATE
related issues unearthed quite some inconsistencies, duplicated code
and other issues.
The fine granular overhaul addresses this, makes the code more robust
and maintainable, which allows to integrate upcoming XSTATE related
features in sane ways.
-----BEGIN PGP SIGNATURE-----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=Mq1m
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
"Fixes and improvements for FPU handling on x86:
- Prevent sigaltstack out of bounds writes.
The kernel unconditionally writes the FPU state to the alternate
stack without checking whether the stack is large enough to
accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space
data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never
been updated despite the fact that the FPU state which is stored on
the signal stack has grown over time which causes trouble in the
field when AVX512 is available on a CPU. The kernel does not expose
the minimum requirements for the alternate stack size depending on
the available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well.
- A major cleanup of the x86 FPU code. The recent discoveries of
XSTATE related issues unearthed quite some inconsistencies,
duplicated code and other issues.
The fine granular overhaul addresses this, makes the code more
robust and maintainable, which allows to integrate upcoming XSTATE
related features in sane ways"
* tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
x86/fpu/xstate: Clear xstate header in copy_xstate_to_uabi_buf() again
x86/fpu/signal: Let xrstor handle the features to init
x86/fpu/signal: Handle #PF in the direct restore path
x86/fpu: Return proper error codes from user access functions
x86/fpu/signal: Split out the direct restore code
x86/fpu/signal: Sanitize copy_user_to_fpregs_zeroing()
x86/fpu/signal: Sanitize the xstate check on sigframe
x86/fpu/signal: Remove the legacy alignment check
x86/fpu/signal: Move initial checks into fpu__restore_sig()
x86/fpu: Mark init_fpstate __ro_after_init
x86/pkru: Remove xstate fiddling from write_pkru()
x86/fpu: Don't store PKRU in xstate in fpu_reset_fpstate()
x86/fpu: Remove PKRU handling from switch_fpu_finish()
x86/fpu: Mask PKRU from kernel XRSTOR[S] operations
x86/fpu: Hook up PKRU into ptrace()
x86/fpu: Add PKRU storage outside of task XSAVE buffer
x86/fpu: Dont restore PKRU in fpregs_restore_userspace()
x86/fpu: Rename xfeatures_mask_user() to xfeatures_mask_uabi()
x86/fpu: Move FXSAVE_LEAK quirk info __copy_kernel_to_fpregs()
x86/fpu: Rename __fpregs_load_activate() to fpregs_restore_userregs()
...
nf_conntrack_netlink.h does not exist, refer to nfnetlink_conntrack.h instead.
Signed-off-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYORvYQAKCRDh3BK/laaZ
PCfvAQCbU+PW2RbwlqjZMet6w9qorh29XYe786P5pNRVbMYCygD+N45l66Sbd/Rz
7M7ioVDseyTW4dnLhb8SzSNB0zr6jQs=
=MDvD
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fixes for virtiofs submounts
- Misc fixes and cleanups
* tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: Fix spelling mistakes
fuse: use DIV_ROUND_UP helper macro for calculations
fuse: fix illegal access to inode with reused nodeid
fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)
fuse: Make fuse_fill_super_submount() static
fuse: Switch to fc_mount() for submounts
fuse: Call vfs_get_tree() for submounts
fuse: add dedicated filesystem context ops for submounts
virtiofs: propagate sync() to file server
fuse: reject internal errno
fuse: check connected before queueing on fpq->io
fuse: ignore PG_workingset after stealing
fuse: Fix infinite loop in sget_fc()
fuse: Fix crash if superblock of submount gets killed early
fuse: Fix crash in fuse_dentry_automount() error path
Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups. Highlights
are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM4qQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylKvQCfbh+OmTkDlDlDhSWlxuV05M1XTXoAoLUcLZru
s5JCnwSZztQQLMDHj7Pd
=Zupm
-----END PGP SIGNATURE-----
Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups.
Highlights are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
serial: mvebu-uart: remove unused member nb from struct mvebu_uart
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
dt-bindings: mvebu-uart: fix documentation
serial: mvebu-uart: correctly calculate minimal possible baudrate
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: fix calculation of clock divisor
tty: make linux/tty_flip.h self-contained
serial: Prefer unsigned int to bare use of unsigned
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
serial: qcom_geni_serial: use DT aliases according to DT bindings
Revert "tty: serial: Add UART driver for Cortina-Access platform"
tty: serial: Add UART driver for Cortina-Access platform
MAINTAINERS: add me back as mxser maintainer
mxser: Documentation, fix typos
mxser: Documentation, make the docs up-to-date
mxser: Documentation, remove traces of callout device
mxser: introduce mxser_16550A_or_MUST helper
mxser: rename flags to old_speed in mxser_set_serial_info
mxser: use port variable in mxser_set_serial_info
mxser: access info->MCR under info->slock
...
Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanna driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems mushed
together" tree...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM8jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymECgCg0yL+8WxDKO5Gg5llM5PshvLB1rQAn0y5pDgg
nw78LV3HQ0U7qaZBtI91
=x+AR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
- Add support for the CXL Fixed Memory Window Structure, a recent
extension of the ACPI CEDT (CXL Early Discovery Table)
- Add infrastructure for component registers
- Add HDM (Host-managed device memory) decoder definitions
- Define a device model for an HDM decoder tree
- Bridge CXL persistent memory capabilities to an NVDIMM bus /
device-model
- Switch to fine grained mapping of CXL MMIO registers to allow
different drivers / system software to own individual register blocks
- Enable media provisioning commands, and publish the label storage area
size in sysfs
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYOB2lAAKCRDfioYZHlFs
ZyyaAP9O+SnYflFX+3gpoU4pK92VbIUl9KzzHdvJdW2CqtEVMgD9GO4V2Ng17WFg
/Mzn9Mj9S+YaHYvOsN6qEF1V0QvqNQ4=
=+X3m
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"This subsystem is still in the build-out phase as the bulk of the
update is improvements to enumeration and fleshing out the device
model. In terms of new features, more mailbox commands have been added
to the allowed-list in support of persistent memory provisioning
support targeting v5.15.
The critical update from an enumeration perspective is support for the
CXL Fixed Memory Window Structure that indicates to Linux which system
physical address ranges decode to the CXL Host Bridges in the system.
This allows the driver to detect which address ranges have been mapped
by firmware and what address ranges are available for future hotplug.
So, again, mostly skeleton this round, with more meat targeting v5.15.
Summary:
- Add support for the CXL Fixed Memory Window Structure, a recent
extension of the ACPI CEDT (CXL Early Discovery Table)
- Add infrastructure for component registers
- Add HDM (Host-managed device memory) decoder definitions
- Define a device model for an HDM decoder tree
- Bridge CXL persistent memory capabilities to an NVDIMM bus /
device-model
- Switch to fine grained mapping of CXL MMIO registers to allow
different drivers / system software to own individual register
blocks
- Enable media provisioning commands, and publish the label storage
area size in sysfs
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
cxl/pci: Rename CXL REGLOC ID
cxl/acpi: Use the ACPI CFMWS to create static decoder objects
cxl/acpi: Add the Host Bridge base address to CXL port objects
cxl/pmem: Register 'pmem' / cxl_nvdimm devices
libnvdimm: Drop unused device power management support
libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()
cxl/pmem: Add initial infrastructure for pmem support
cxl/core: Add cxl-bus driver infrastructure
cxl/pci: Add media provisioning required commands
cxl/component_regs: Fix offset
cxl/hdm: Fix decoder count calculation
cxl/acpi: Introduce cxl_decoder objects
cxl/acpi: Enumerate host bridge root ports
cxl/acpi: Add downstream port data to cxl_port instances
cxl/Kconfig: Default drivers to CONFIG_CXL_BUS
cxl/acpi: Introduce the root of a cxl_port topology
cxl/pci: Fixup devm_cxl_iomap_block() to take a 'struct device *'
cxl/pci: Add HDM decoder capabilities
cxl/pci: Reserve individual register block regions
cxl/pci: Map registers based on capabilities
...
As the diffstat scatters over the tree, we've got many tree-wide
small changes, but also got quite a few intrusive changes in the
core side. The only ABI-visible core change is the new rawmidi
framing mode support while others are kernel-internal, mostly code
refactoring and/or nice improvements.
Here are some highlights:
Core:
- A new framing access mode for rawmidi to get timestamps
- Cleanup / refactoring of buffer memory management helper code
- Support for automatic negotiation of ASoC DAI formats
- Revival of software suspend for PCM and control core, as a
preliminary work for PCI BAR rescan support
ASoC:
- Accessory detection support for several Qualcomm parts
- Support for IEC958 control with hdmi-codec
- Merging of Tegra machine drivers into a single driver
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
USB-audio:
- Reduction of latency at playback start
- Code cleanup / fixes of usx2y driver
- Scarlett2 mixer code fixes and enhancements
- Quirks for Ozone and Denon devices
HD-audio:
- A few quirks for HP and ASUS machines
- Display power management fixes
Others:
- FireWire code refactoring and enhancements
- Tree-wide trivial coding-style fixes
-----BEGIN PGP SIGNATURE-----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=IN9G
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat scatters over the tree, we've got many tree-wide small
changes, but also got quite a few intrusive changes in the core side.
The only ABI-visible core change is the new rawmidi framing mode
support while others are kernel-internal, mostly code refactoring
and/or nice improvements.
Here are some highlights:
Core:
- A new framing access mode for rawmidi to get timestamps
- Cleanup / refactoring of buffer memory management helper code
- Support for automatic negotiation of ASoC DAI formats
- Revival of software suspend for PCM and control core, as a
preliminary work for PCI BAR rescan support
ASoC:
- Accessory detection support for several Qualcomm parts
- Support for IEC958 control with hdmi-codec
- Merging of Tegra machine drivers into a single driver
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
USB-audio:
- Reduction of latency at playback start
- Code cleanup / fixes of usx2y driver
- Scarlett2 mixer code fixes and enhancements
- Quirks for Ozone and Denon devices
HD-audio:
- A few quirks for HP and ASUS machines
- Display power management fixes
Others:
- FireWire code refactoring and enhancements
- Tree-wide trivial coding-style fixes"
* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek - Add ALC285 HP init procedure
ALSA: hda/realtek - Add type for ALC287
ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
ALSA: scarlett2: Fix pad count for 18i8 Gen 3
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
ALSA: hda: Release codec display power during shutdown/reboot
ALSA: hda: Release controller display power during shutdown/reboot
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ASoC: fsl: remove unnecessary oom message
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
...
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
This PR contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that can do
ROCE. Otherwise this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide refcount_t
conversion
- Several series for the hns driver, more HIP09 HW capabilities, migration
to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use DEVICE_ATTR_*,
make the ib_port sysfs first-class, and overall use sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support
-----BEGIN PGP SIGNATURE-----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=wyqt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.
This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.
This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface for getting PHC (PTP Hardware Clock)
virtual clocks, which are based on PHC physical clock
providing hardware timestamp to network packets.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDcl7AACgkQnJ2qBz9k
QNnsBQf+LBAPsfykQ/f8EdHErO1lfbVTmwf2g/JzTkjrIVZTZ6Ic47aCIiFxgHU2
Js9ufaPxpsbbopzpn2PAoCUzxNsZDqgXtnC03MOUAqoSFbAvgLHz2sQwjqeYJUGQ
P6n7VipEA/qBVpQI5zeCUhHYcahoNrRjSLzaFnE2Z8CrQYQ6Ry9gVEhduvu2OTru
62cWlAWlTJfx/FcR1Y0F/ZznnNSKMiAHcEe3F6Beztplg2ooq+z6FclJYrkmnxMq
SXSOsqTCdi1/oFx36NpvLkykrIS9I7N/iqCnKwbm6X+nyZZKyAwYZhWVqkbozPPu
+u1Ppq8o0IuWwEA6/UAmxgAO3m/Gkw==
=tn0h
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc fs updates from Jan Kara:
"The new quotactl_fd() syscall (remake of quotactl_path() syscall that
got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
isofs, and writeback fixes and cleanups"
* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: fix obtain a reference to a freeing memcg css
quota: remove unnecessary oom message
isofs: remove redundant continue statement
quota: Wire up quotactl_fd syscall
quota: Change quotactl_path() systcall to an fd-based one
reiserfs: Remove unneed check in reiserfs_write_full_page()
udf: Fix NULL pointer dereference in udf_symlink function
reiserfs: add check for invalid 1st journal block
I. Background: Sparse Memory Mappings
When we manage sparse memory mappings dynamically in user space - also
sometimes involving MAP_NORESERVE - we want to dynamically populate/
discard memory inside such a sparse memory region. Example users are
hypervisors (especially implementing memory ballooning or similar
technologies like virtio-mem) and memory allocators. In addition, we want
to fail in a nice way (instead of generating SIGBUS) if populating does
not succeed because we are out of backend memory (which can happen easily
with file-based mappings, especially tmpfs and hugetlbfs).
While MADV_DONTNEED, MADV_REMOVE and FALLOC_FL_PUNCH_HOLE allow for
reliably discarding memory for most mapping types, there is no generic
approach to populate page tables and preallocate memory.
Although mmap() supports MAP_POPULATE, it is not applicable to the concept
of sparse memory mappings, where we want to populate/discard dynamically
and avoid expensive/problematic remappings. In addition, we never
actually report errors during the final populate phase - it is best-effort
only.
fallocate() can be used to preallocate file-based memory and fail in a
safe way. However, it cannot really be used for any private mappings on
anonymous files via memfd due to COW semantics. In addition, fallocate()
does not actually populate page tables, so we still always get pagefaults
on first access - which is sometimes undesired (i.e., real-time workloads)
and requires real prefaulting of page tables, not just a preallocation of
backend storage. There might be interesting use cases for sparse memory
regions along with mlockall(MCL_ONFAULT) which fallocate() cannot satisfy
as it does not prefault page tables.
II. On preallcoation/prefaulting from user space
Because we don't have a proper interface, what applications (like QEMU and
databases) end up doing is touching (i.e., reading+writing one byte to not
overwrite existing data) all individual pages.
However, that approach
1) Can result in wear on storage backing, because we end up reading/writing
each page; this is especially a problem for dax/pmem.
2) Can result in mmap_sem contention when prefaulting via multiple
threads.
3) Requires expensive signal handling, especially to catch SIGBUS in case
of hugetlbfs/shmem/file-backed memory. For example, this is
problematic in hypervisors like QEMU where SIGBUS handlers might already
be used by other subsystems concurrently to e.g, handle hardware errors.
"Simply" doing preallocation concurrently from other thread is not that
easy.
III. On MADV_WILLNEED
Extending MADV_WILLNEED is not an option because
1. It would change the semantics: "Expect access in the near future." and
"might be a good idea to read some pages" vs. "Definitely populate/
preallocate all memory and definitely fail on errors.".
2. Existing users (like virtio-balloon in QEMU when deflating the balloon)
don't want populate/prealloc semantics. They treat this rather as a hint
to give a little performance boost without too much overhead - and don't
expect that a lot of memory might get consumed or a lot of time
might be spent.
IV. MADV_POPULATE_READ and MADV_POPULATE_WRITE
Let's introduce MADV_POPULATE_READ and MADV_POPULATE_WRITE, inspired by
MAP_POPULATE, with the following semantics:
1. MADV_POPULATE_READ can be used to prefault page tables just like
manually reading each individual page. This will not break any COW
mappings. The shared zero page might get mapped and no backend storage
might get preallocated -- allocation might be deferred to
write-fault time. Especially shared file mappings require an explicit
fallocate() upfront to actually preallocate backend memory (blocks in
the file system) in case the file might have holes.
2. If MADV_POPULATE_READ succeeds, all page tables have been populated
(prefaulted) readable once.
3. MADV_POPULATE_WRITE can be used to preallocate backend memory and
prefault page tables just like manually writing (or
reading+writing) each individual page. This will break any COW
mappings -- e.g., the shared zeropage is never populated.
4. If MADV_POPULATE_WRITE succeeds, all page tables have been populated
(prefaulted) writable once.
5. MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot be applied to special
mappings marked with VM_PFNMAP and VM_IO. Also, proper access
permissions (e.g., PROT_READ, PROT_WRITE) are required. If any such
mapping is encountered, madvise() fails with -EINVAL.
6. If MADV_POPULATE_READ or MADV_POPULATE_WRITE fails, some page tables
might have been populated.
7. MADV_POPULATE_READ and MADV_POPULATE_WRITE will return -EHWPOISON
when encountering a HW poisoned page in the range.
8. Similar to MAP_POPULATE, MADV_POPULATE_READ and MADV_POPULATE_WRITE
cannot protect from the OOM (Out Of Memory) handler killing the
process.
While the use case for MADV_POPULATE_WRITE is fairly obvious (i.e.,
preallocate memory and prefault page tables for VMs), one issue is that
whenever we prefault pages writable, the pages have to be marked dirty,
because the CPU could dirty them any time. while not a real problem for
hugetlbfs or dax/pmem, it can be a problem for shared file mappings: each
page will be marked dirty and has to be written back later when evicting.
MADV_POPULATE_READ allows for optimizing this scenario: Pre-read a whole
mapping from backend storage without marking it dirty, such that eviction
won't have to write it back. As discussed above, shared file mappings
might require an explciit fallocate() upfront to achieve
preallcoation+prepopulation.
Although sparse memory mappings are the primary use case, this will also
be useful for other preallocate/prefault use cases where MAP_POPULATE is
not desired or the semantics of MAP_POPULATE are not sufficient: as one
example, QEMU users can trigger preallocation/prefaulting of guest RAM
after the mapping was created -- and don't want errors to be silently
suppressed.
Looking at the history, MADV_POPULATE was already proposed in 2013 [1],
however, the main motivation back than was performance improvements --
which should also still be the case.
V. Single-threaded performance comparison
I did a short experiment, prefaulting page tables on completely *empty
mappings/files* and repeated the experiment 10 times. The results
correspond to the shortest execution time. In general, the performance
benefit for huge pages is negligible with small mappings.
V.1: Private mappings
POPULATE_READ and POPULATE_WRITE is fastest. Note that
Reading/POPULATE_READ will populate the shared zeropage where applicable
-- which result in short population times.
The fastest way to allocate backend storage (here: swap or huge pages) and
prefault page tables is POPULATE_WRITE.
V.2: Shared mappings
fallocate() is fastest, however, doesn't prefault page tables.
POPULATE_WRITE is faster than simple writes and read/writes.
POPULATE_READ is faster than simple reads.
Without a fd, the fastest way to allocate backend storage and prefault
page tables is POPULATE_WRITE. With an fd, the fastest way is usually
FALLOCATE+POPULATE_READ or FALLOCATE+POPULATE_WRITE respectively; one
exception are actual files: FALLOCATE+Read is slightly faster than
FALLOCATE+POPULATE_READ.
The fastest way to allocate backend storage prefault page tables is
FALLOCATE+POPULATE_WRITE -- except when dealing with actual files; then,
FALLOCATE+POPULATE_READ is fastest and won't directly mark all pages as
dirty.
v.3: Detailed results
==================================================
2 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB : Read : 0.119 ms
Anon 4 KiB : Write : 0.222 ms
Anon 4 KiB : Read/Write : 0.380 ms
Anon 4 KiB : POPULATE_READ : 0.060 ms
Anon 4 KiB : POPULATE_WRITE : 0.158 ms
Memfd 4 KiB : Read : 0.034 ms
Memfd 4 KiB : Write : 0.310 ms
Memfd 4 KiB : Read/Write : 0.362 ms
Memfd 4 KiB : POPULATE_READ : 0.039 ms
Memfd 4 KiB : POPULATE_WRITE : 0.229 ms
Memfd 2 MiB : Read : 0.030 ms
Memfd 2 MiB : Write : 0.030 ms
Memfd 2 MiB : Read/Write : 0.030 ms
Memfd 2 MiB : POPULATE_READ : 0.030 ms
Memfd 2 MiB : POPULATE_WRITE : 0.030 ms
tmpfs : Read : 0.033 ms
tmpfs : Write : 0.313 ms
tmpfs : Read/Write : 0.406 ms
tmpfs : POPULATE_READ : 0.039 ms
tmpfs : POPULATE_WRITE : 0.285 ms
file : Read : 0.033 ms
file : Write : 0.351 ms
file : Read/Write : 0.408 ms
file : POPULATE_READ : 0.039 ms
file : POPULATE_WRITE : 0.290 ms
hugetlbfs : Read : 0.030 ms
hugetlbfs : Write : 0.030 ms
hugetlbfs : Read/Write : 0.030 ms
hugetlbfs : POPULATE_READ : 0.030 ms
hugetlbfs : POPULATE_WRITE : 0.030 ms
**************************************************
4096 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB : Read : 237.940 ms
Anon 4 KiB : Write : 708.409 ms
Anon 4 KiB : Read/Write : 1054.041 ms
Anon 4 KiB : POPULATE_READ : 124.310 ms
Anon 4 KiB : POPULATE_WRITE : 572.582 ms
Memfd 4 KiB : Read : 136.928 ms
Memfd 4 KiB : Write : 963.898 ms
Memfd 4 KiB : Read/Write : 1106.561 ms
Memfd 4 KiB : POPULATE_READ : 78.450 ms
Memfd 4 KiB : POPULATE_WRITE : 805.881 ms
Memfd 2 MiB : Read : 357.116 ms
Memfd 2 MiB : Write : 357.210 ms
Memfd 2 MiB : Read/Write : 357.606 ms
Memfd 2 MiB : POPULATE_READ : 356.094 ms
Memfd 2 MiB : POPULATE_WRITE : 356.937 ms
tmpfs : Read : 137.536 ms
tmpfs : Write : 954.362 ms
tmpfs : Read/Write : 1105.954 ms
tmpfs : POPULATE_READ : 80.289 ms
tmpfs : POPULATE_WRITE : 822.826 ms
file : Read : 137.874 ms
file : Write : 987.025 ms
file : Read/Write : 1107.439 ms
file : POPULATE_READ : 80.413 ms
file : POPULATE_WRITE : 857.622 ms
hugetlbfs : Read : 355.607 ms
hugetlbfs : Write : 355.729 ms
hugetlbfs : Read/Write : 356.127 ms
hugetlbfs : POPULATE_READ : 354.585 ms
hugetlbfs : POPULATE_WRITE : 355.138 ms
**************************************************
2 MiB MAP_SHARED:
**************************************************
Anon 4 KiB : Read : 0.394 ms
Anon 4 KiB : Write : 0.348 ms
Anon 4 KiB : Read/Write : 0.400 ms
Anon 4 KiB : POPULATE_READ : 0.326 ms
Anon 4 KiB : POPULATE_WRITE : 0.273 ms
Anon 2 MiB : Read : 0.030 ms
Anon 2 MiB : Write : 0.030 ms
Anon 2 MiB : Read/Write : 0.030 ms
Anon 2 MiB : POPULATE_READ : 0.030 ms
Anon 2 MiB : POPULATE_WRITE : 0.030 ms
Memfd 4 KiB : Read : 0.412 ms
Memfd 4 KiB : Write : 0.372 ms
Memfd 4 KiB : Read/Write : 0.419 ms
Memfd 4 KiB : POPULATE_READ : 0.343 ms
Memfd 4 KiB : POPULATE_WRITE : 0.288 ms
Memfd 4 KiB : FALLOCATE : 0.137 ms
Memfd 4 KiB : FALLOCATE+Read : 0.446 ms
Memfd 4 KiB : FALLOCATE+Write : 0.330 ms
Memfd 4 KiB : FALLOCATE+Read/Write : 0.454 ms
Memfd 4 KiB : FALLOCATE+POPULATE_READ : 0.379 ms
Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 0.268 ms
Memfd 2 MiB : Read : 0.030 ms
Memfd 2 MiB : Write : 0.030 ms
Memfd 2 MiB : Read/Write : 0.030 ms
Memfd 2 MiB : POPULATE_READ : 0.030 ms
Memfd 2 MiB : POPULATE_WRITE : 0.030 ms
Memfd 2 MiB : FALLOCATE : 0.030 ms
Memfd 2 MiB : FALLOCATE+Read : 0.031 ms
Memfd 2 MiB : FALLOCATE+Write : 0.031 ms
Memfd 2 MiB : FALLOCATE+Read/Write : 0.031 ms
Memfd 2 MiB : FALLOCATE+POPULATE_READ : 0.030 ms
Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 0.030 ms
tmpfs : Read : 0.416 ms
tmpfs : Write : 0.369 ms
tmpfs : Read/Write : 0.425 ms
tmpfs : POPULATE_READ : 0.346 ms
tmpfs : POPULATE_WRITE : 0.295 ms
tmpfs : FALLOCATE : 0.139 ms
tmpfs : FALLOCATE+Read : 0.447 ms
tmpfs : FALLOCATE+Write : 0.333 ms
tmpfs : FALLOCATE+Read/Write : 0.454 ms
tmpfs : FALLOCATE+POPULATE_READ : 0.380 ms
tmpfs : FALLOCATE+POPULATE_WRITE : 0.272 ms
file : Read : 0.191 ms
file : Write : 0.511 ms
file : Read/Write : 0.524 ms
file : POPULATE_READ : 0.196 ms
file : POPULATE_WRITE : 0.434 ms
file : FALLOCATE : 0.004 ms
file : FALLOCATE+Read : 0.197 ms
file : FALLOCATE+Write : 0.554 ms
file : FALLOCATE+Read/Write : 0.480 ms
file : FALLOCATE+POPULATE_READ : 0.201 ms
file : FALLOCATE+POPULATE_WRITE : 0.381 ms
hugetlbfs : Read : 0.030 ms
hugetlbfs : Write : 0.030 ms
hugetlbfs : Read/Write : 0.030 ms
hugetlbfs : POPULATE_READ : 0.030 ms
hugetlbfs : POPULATE_WRITE : 0.030 ms
hugetlbfs : FALLOCATE : 0.030 ms
hugetlbfs : FALLOCATE+Read : 0.031 ms
hugetlbfs : FALLOCATE+Write : 0.031 ms
hugetlbfs : FALLOCATE+Read/Write : 0.030 ms
hugetlbfs : FALLOCATE+POPULATE_READ : 0.030 ms
hugetlbfs : FALLOCATE+POPULATE_WRITE : 0.030 ms
**************************************************
4096 MiB MAP_SHARED:
**************************************************
Anon 4 KiB : Read : 1053.090 ms
Anon 4 KiB : Write : 913.642 ms
Anon 4 KiB : Read/Write : 1060.350 ms
Anon 4 KiB : POPULATE_READ : 893.691 ms
Anon 4 KiB : POPULATE_WRITE : 782.885 ms
Anon 2 MiB : Read : 358.553 ms
Anon 2 MiB : Write : 358.419 ms
Anon 2 MiB : Read/Write : 357.992 ms
Anon 2 MiB : POPULATE_READ : 357.533 ms
Anon 2 MiB : POPULATE_WRITE : 357.808 ms
Memfd 4 KiB : Read : 1078.144 ms
Memfd 4 KiB : Write : 942.036 ms
Memfd 4 KiB : Read/Write : 1100.391 ms
Memfd 4 KiB : POPULATE_READ : 925.829 ms
Memfd 4 KiB : POPULATE_WRITE : 804.394 ms
Memfd 4 KiB : FALLOCATE : 304.632 ms
Memfd 4 KiB : FALLOCATE+Read : 1163.359 ms
Memfd 4 KiB : FALLOCATE+Write : 933.186 ms
Memfd 4 KiB : FALLOCATE+Read/Write : 1187.304 ms
Memfd 4 KiB : FALLOCATE+POPULATE_READ : 1013.660 ms
Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 794.560 ms
Memfd 2 MiB : Read : 358.131 ms
Memfd 2 MiB : Write : 358.099 ms
Memfd 2 MiB : Read/Write : 358.250 ms
Memfd 2 MiB : POPULATE_READ : 357.563 ms
Memfd 2 MiB : POPULATE_WRITE : 357.334 ms
Memfd 2 MiB : FALLOCATE : 356.735 ms
Memfd 2 MiB : FALLOCATE+Read : 358.152 ms
Memfd 2 MiB : FALLOCATE+Write : 358.331 ms
Memfd 2 MiB : FALLOCATE+Read/Write : 358.018 ms
Memfd 2 MiB : FALLOCATE+POPULATE_READ : 357.286 ms
Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 357.523 ms
tmpfs : Read : 1087.265 ms
tmpfs : Write : 950.840 ms
tmpfs : Read/Write : 1107.567 ms
tmpfs : POPULATE_READ : 922.605 ms
tmpfs : POPULATE_WRITE : 810.094 ms
tmpfs : FALLOCATE : 306.320 ms
tmpfs : FALLOCATE+Read : 1169.796 ms
tmpfs : FALLOCATE+Write : 933.730 ms
tmpfs : FALLOCATE+Read/Write : 1191.610 ms
tmpfs : FALLOCATE+POPULATE_READ : 1020.474 ms
tmpfs : FALLOCATE+POPULATE_WRITE : 798.945 ms
file : Read : 654.101 ms
file : Write : 1259.142 ms
file : Read/Write : 1289.509 ms
file : POPULATE_READ : 661.642 ms
file : POPULATE_WRITE : 1106.816 ms
file : FALLOCATE : 1.864 ms
file : FALLOCATE+Read : 656.328 ms
file : FALLOCATE+Write : 1153.300 ms
file : FALLOCATE+Read/Write : 1180.613 ms
file : FALLOCATE+POPULATE_READ : 668.347 ms
file : FALLOCATE+POPULATE_WRITE : 996.143 ms
hugetlbfs : Read : 357.245 ms
hugetlbfs : Write : 357.413 ms
hugetlbfs : Read/Write : 357.120 ms
hugetlbfs : POPULATE_READ : 356.321 ms
hugetlbfs : POPULATE_WRITE : 356.693 ms
hugetlbfs : FALLOCATE : 355.927 ms
hugetlbfs : FALLOCATE+Read : 357.074 ms
hugetlbfs : FALLOCATE+Write : 357.120 ms
hugetlbfs : FALLOCATE+Read/Write : 356.983 ms
hugetlbfs : FALLOCATE+POPULATE_READ : 356.413 ms
hugetlbfs : FALLOCATE+POPULATE_WRITE : 356.266 ms
**************************************************
[1] https://lkml.org/lkml/2013/6/27/698
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20210419135443.12822-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MPOL_LOCAL policy has been setup as a real policy, but it is still handled
like a faked POL_PREFERRED policy with one internal MPOL_F_LOCAL flag bit
set, and there are many places having to judge the real 'prefer' or the
'local' policy, which are quite confusing.
In current code, there are 4 cases that MPOL_LOCAL are used:
1. user specifies 'local' policy
2. user specifies 'prefer' policy, but with empty nodemask
3. system 'default' policy is used
4. 'prefer' policy + valid 'preferred' node with MPOL_F_STATIC_NODES
flag set, and when it is 'rebind' to a nodemask which doesn't contains
the 'preferred' node, it will perform as 'local' policy
So make 'local' a real policy instead of a fake 'prefer' one, and kill
MPOL_F_LOCAL bit, which can greatly reduce the confusion for code reading.
For case 4, the logic of mpol_rebind_preferred() is confusing, as Michal
Hocko pointed out:
: I do believe that rebinding preferred policy is just bogus and it should
: be dropped altogether on the ground that a preference is a mere hint from
: userspace where to start the allocation. Unless I am missing something
: cpusets will be always authoritative for the final placement. The
: preferred node just acts as a starting point and it should be really
: preserved when cpusets changes. Otherwise we have a very subtle behavior
: corner cases.
So dump all the tricky transformation between 'prefer' and 'local', and
just record the new nodemask of rebinding.
[feng.tang@intel.com: fix a problem in mpol_set_nodemask(), per Michal Hocko]
Link: https://lkml.kernel.org/r/1622560492-1294-3-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: refine code and comments of mpol_set_nodemask(), per Michal]
Link: https://lkml.kernel.org/r/20210603081807.GE56979@shbuild999.sh.intel.com
Link: https://lkml.kernel.org/r/1622469956-82897-3-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the feature is fully implemented (the faulting path hooks exist
so userspace is notified, and the ioctl to resolve such faults is
available), advertise this as a supported feature.
Link: https://lkml.kernel.org/r/20210503180737.2487560-6-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
-----BEGIN PGP SIGNATURE-----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=1bAZ
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Another merge window, another small audit pull request.
Four patches in total: one is cosmetic, one removes an unnecessary
initialization, one renames some enum values to prevent name
collisions, and one converts list_del()/list_add() to list_move().
None of these are earth shattering and all pass the audit-testsuite
tests while merging cleanly on top of your tree from earlier today"
* tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove unnecessary 'ret' initialization
audit: remove trailing spaces and tabs
audit: Use list_move instead of list_del/list_add
audit: Rename enum audit_state constants to avoid AUDIT_DISABLED redefinition
audit: add blank line after variable declarations
Problem:
On reconfigure of device, there is no way to defend if the backend
storage is matching with the initial backend storage.
Say, if an initial connect request for backend "pool1/image1" got
mapped to /dev/nbd0 and the userspace process is terminated. A next
reconfigure request within NBD_ATTR_DEAD_CONN_TIMEOUT is allowed to
use /dev/nbd0 for a different backend "pool1/image2"
For example, an operation like below could be dangerous:
$ sudo rbd-nbd map --try-netlink rbd-pool/ext4-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="bfc444b4-64b1-418f-8b36-6e0d170cfc04" TYPE="ext4"
$ sudo pkill -9 rbd-nbd
$ sudo rbd-nbd attach --try-netlink --device /dev/nbd0 rbd-pool/xfs-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="d29bf343-6570-4069-a9ea-2fa156ced908" TYPE="xfs"
Solution:
Provide a way for userspace processes to keep some metadata to identify
between the device and the backend, so that when a reconfigure request is
made, we can compare and avoid such dangerous operations.
With this solution, as part of the initial connect request, backend
path can be stored in the sysfs per device config, so that on a reconfigure
request it's easy to check if the backend path matches with the initial
connect backend path.
Please note, ioctl interface to nbd will not have these changes, as there
won't be any reconfigure.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210429102828.31248-1-prasanna.kalever@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Highlights:
- New think-lmi driver adding support for changing BIOS settings from
within Linux using the standard firmware-attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function
Note this also contains merges of the following immutable branches/tags
shared with other subsystems:
- platform-drivers-x86-goodix-v5.14-1
- intel-gpio-v5.14-1
- linux-pm/acpi-scan
- devm-helpers-v5.14-1
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: initialize local variable to avoid garbage being returned
- scan: Add function to fetch dependent of ACPI device
- scan: Extend acpi_walk_dep_device_list()
- scan: Rearrange dep_unmet initialization
Add intel_skl_int3472 driver:
- Add intel_skl_int3472 driver
ISST:
- Use numa node id for cpu pci dev mapping
- Optimize CPU to PCI device mapping
Input:
- goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
MAINTAINERS:
- Update IRC link for Surface System Aggregator subsystem
- Update info for telemetry
Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans
Merge tag 'devm-helpers-v5.14-1' into review-hans:
- Merge tag 'devm-helpers-v5.14-1' into review-hans
Merge tag 'intel-gpio-v5.14-1' into review-hans:
- Merge tag 'intel-gpio-v5.14-1' into review-hans
Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans:
- Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans
Remove "default n" entries:
- Remove "default n" entries
Rename hp-wireless to wireless-hotkey:
- Rename hp-wireless to wireless-hotkey
asus-nb-wmi:
- Revert "add support for ASUS ROG Zephyrus G14 and G15"
- Revert "Drop duplicate DMI quirk structures"
dcdbas:
- drop unneeded assignment in host_control_smi()
dell-privacy:
- Add support for Dell hardware privacy
dell-wmi:
- Rename dell-wmi.c to dell-wmi-base.c
dell-wmi-sysman:
- Change user experience when Admin/System Password is modified
- fw_attr_inuse can be static
- Use firmware_attributes_class helper
- Make populate_foo_data functions more robust
dell-wmi-sysman/think-lmi:
- Make fw_attr_class global static
devm-helpers:
- Add resource managed version of work init
docs:
- driver-api: Update Surface Aggregator user-space interface documentation
extcon:
- extcon-max8997: Simplify driver using devm
- extcon-max8997: Fix IRQ freeing at error path
- extcon-max77693.c: Fix potential work-queue cancellation race
- extcon-max14577: Fix potential work-queue cancellation race
firmware_attributes_class:
- Create helper file for handling firmware-attributes class registration events
gpio:
- wcove: Split error handling for CTRL and IRQ registers
- wcove: Unify style of to_reg() with to_ireg()
- wcove: Use IRQ hardware number getter instead of direct access
- crystalcove: remove platform_set_drvdata() + cleanup probe
gpiolib:
- acpi: Add acpi_gpio_get_io_resource()
- acpi: Introduce acpi_get_and_request_gpiod() helper
hdaps:
- Constify static attribute_group struct
ideapad-laptop:
- Ignore VPC event bit 10
intel_cht_int33fe:
- Move to its own subfolder
- Correct "displayport" fwnode reference
intel_ips:
- fix set but unused warning in read_mgtv
intel_pmt_crashlog:
- Constify static attribute_group struct
intel_skl_int3472:
- Uninitialized variable in skl_int3472_handle_gpio_resources()
- Move to intel/ subfolder
- Provide skl_int3472_unregister_clock()
- Provide skl_int3472_unregister_regulator()
- Use ACPI GPIO resource directly
- Fix dependencies (drop CLKDEV_LOOKUP)
- Free ACPI device resources after use
mfd:
- tps68470: Remove tps68470 MFD driver
platform/mellanox:
- mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag"
platform/surface:
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_packet_layer.c
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_request_layer.c
- aggregator: Drop unnecessary variable initialization
- aggregator: Do not return uninitialized value
- aggregator_cdev: Add lockdep support
- aggregator_cdev: Allow enabling of events from user-space
- aggregator_cdev: Add support for forwarding events to user-space
- aggregator: Update copyright
- aggregator: Allow enabling of events without notifiers
- aggregator: Allow registering notifiers without enabling events
- dtx: Add missing mutex_destroy() call in failure path
- aggregator: Fix event disable function
- aggregator_registry: Consolidate node groups for 5th- and 6th-gen devices
- aggregator_registry: Add support for 13" Intel Surface Laptop 4
- aggregator_registry: Update comments for 15" AMD Surface Laptop 4
samsung-laptop:
- set debugfs blobs to read only
- use octal numbers for rwx file permissions
tc1100-wmi:
- Constify static attribute_group struct
think-lmi:
- Move kfree(setting->possible_values) to tlmi_attr_setting_release()
- Split current_value to reflect only the value
- Fix issues with duplicate attributes
- Return EINVAL when kbdlang gets set to a 0 length string
- Add missing MODULE_DEVICE_TABLE
- Avoid potential read before start of the buffer
- Fix check for admin password being set
- Add WMI interface support on Lenovo platforms
thinkpad-lmi:
- Remove unused display_name member from struct tlmi_pwd_setting
thinkpad_acpi:
- Add X1 Carbon Gen 9 second fan support
- Fix inconsistent indenting
tools/power/x86/intel-speed-select:
- v1.10 release
- Fix uncore memory frequency display
toshiba_acpi:
- Fix missing error code in toshiba_acpi_setup_keyboard()
toshiba_haps:
- Fix missing newline in pr_debug call in toshiba_haps_notify
touchscreen_dmi:
- Fix Chuwi Hi10 Pro comment
- Add info for the Goodix GT912 panel of TM800A550L tablets
- Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
x86/platform/uv:
- Constify static attribute_group struct
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmDbELwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yp2wgAj1mTOJi/4Rx1g8wXLpP/hflEkFMU
yyMeKe3LOEzuo/LZUfW4tqWiXa4aTgN6rUOF8KUumsIor/72hKcczuPVY+qCqF7V
qYZ0vMG93DfAyVPQvBrNjHMXiVevD/gMFRqJEOOgXt96B6Zea4vh1pBvLACAHFZ0
bjkZDX3cO89TSfUF7uhiU9UkMvMMAVs34Knc1Pe4QnZ16e2kPGcKip3qb73yT+xC
8NVRgE6fdSIJfDAVzqpdh91rfDdzHDJ6vT10uijOTkriJciN07UKtYuK5StCpAo5
sXIQllHySHRHj5N0IWZ04w6RMQ+l/9CaHDttkYWW3fV1EU9SVzvp/+d6zA==
=tAuE
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New think-lmi driver adding support for changing Lenovo Thinkpad
BIOS settings from within Linux using the standard firmware-
attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function"
* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
platform/x86: think-lmi: Split current_value to reflect only the value
platform/x86: think-lmi: Fix issues with duplicate attributes
platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
platform/x86: intel_cht_int33fe: Move to its own subfolder
platform/x86: intel_skl_int3472: Move to intel/ subfolder
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
platform/x86: intel_skl_int3472: Free ACPI device resources after use
platform/x86: Remove "default n" entries
platform/x86: ISST: Use numa node id for cpu pci dev mapping
platform/x86: ISST: Optimize CPU to PCI device mapping
tools/power/x86/intel-speed-select: v1.10 release
tools/power/x86/intel-speed-select: Fix uncore memory frequency display
extcon: extcon-max8997: Simplify driver using devm
extcon: extcon-max8997: Fix IRQ freeing at error path
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYNnKNAAKCRCRxhvAZXjc
ok/HAQDz3FK3/yeqxH6OLyCedUcD+YBFPPzrfqX+3y6q3z5tGgD9GAGxFXWcMFA2
/cbfmizwh1eJ3WMnbHUp7x6ogpQhWwQ=
=PpNs
-----END PGP SIGNATURE-----
Merge tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr updates from Christian Brauner:
"A few releases ago the old mount API gained support for a mount
options which prevents following symlinks on a given mount. This adds
support for it in the new mount api through the MOUNT_ATTR_NOSYMFOLLOW
flag via mount_setattr() and fsmount(). With mount_setattr() that flag
can even be applied recursively.
There's an additional ack from Ross Zwisler who originally authored
the nosymfollow patch. As I've already had the patches in my for-next
I didn't add his ack explicitly"
* tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test MOUNT_ATTR_NOSYMFOLLOW with mount_setattr()
mount: Support "nosymfollow" in new mount api
-----BEGIN PGP SIGNATURE-----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=htVu
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A normal mix of improvements, core changes and features that user have
been missing or complaining about.
User visible changes:
- new sysfs exports:
- add sysfs knob to limit scrub IO bandwidth per device
- device stats are also available in
/sys/fs/btrfs/FSID/devinfo/DEVID/error_stats
- support cancellable resize and device delete ioctls
- change how the empty value is interpreted when setting a property,
so far we have only 'btrfs.compression' and we need to distinguish
a reset to defaults and setting "do not compress", in general the
empty value will always mean 'reset to defaults' for any other
property, for compression it's either 'no' or 'none' to forbid
compression
Performance improvements:
- no need for full sync when truncation does not touch extents,
reported run time change is -12%
- avoid unnecessary logging of xattrs during fast fsyncs (+17%
throughput, -17% runtime on xattr stress workload)
Core:
- preemptive flushing improvements and fixes
- adjust clamping logic on multi-threaded workloads to avoid
flushing too soon
- take into account global block reserve, may help on almost full
filesystems
- continue flushing when there are enough pending delalloc and
ordered bytes
- simplify logic around conditional transaction commit, a workaround
used in the past for throttling that's been superseded by ticket
reservations that manage the throttling in a better way
- subpage blocksize preparation:
- submit read time repair only for each corrupted sector
- scrub repair now works with sectors and not pages
- free space cache (v1) works with sectors and not pages
- more fine grained bio tracking for extents
- subpage support in page callbacks, extent callbacks, end io
callbacks
- simplify transaction abort logic and always abort and don't check
various potentially unreliable stats tracked by the transaction
- exclusive operations can do more checks when started and allow eg.
cancellation of the same running operation
- ensure relocation never runs while we have send operations running,
e.g. when zoned background auto reclaim starts
Fixes:
- zoned: more sanity checks of write pointer
- improve error handling in delayed inodes
- send:
- fix invalid path for unlink operations after parent
orphanization
- fix crash when memory allocations trigger reclaim
- skip compression of we have only one page (can't make things
better)
- empty value of a property newly means reset to default
Other:
- lots of cleanups, comment updates, yearly typo fixing
- disable build on platforms having page size 256K"
* tag 'for-5.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (101 commits)
btrfs: remove unused btrfs_fs_info::total_pinned
btrfs: rip out btrfs_space_info::total_bytes_pinned
btrfs: rip the first_ticket_bytes logic from fail_all_tickets
btrfs: remove FLUSH_DELAYED_REFS from data ENOSPC flushing
btrfs: rip out may_commit_transaction
btrfs: send: fix crash when memory allocations trigger reclaim
btrfs: ensure relocation never runs while we have send operations running
btrfs: shorten integrity checker extent data mount option
btrfs: switch mount option bits to enums and use wider type
btrfs: props: change how empty value is interpreted
btrfs: compression: don't try to compress if we don't have enough pages
btrfs: fix unbalanced unlock in qgroup_account_snapshot()
btrfs: sysfs: export dev stats in devinfo directory
btrfs: fix typos in comments
btrfs: remove a stale comment for btrfs_decompress_bio()
btrfs: send: use list_move_tail instead of list_del/list_add_tail
btrfs: disable build on platforms having page size 256K
btrfs: send: fix invalid path for unlink operations after parent orphanization
btrfs: inline wait_current_trans_commit_start in its caller
btrfs: sink wait_for_unblock parameter to async commit
...
-----BEGIN PGP SIGNATURE-----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=VQX8
-----END PGP SIGNATURE-----
Merge tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- V4L2 core control API was split into separate files
- New RC maps: tango and tc-90405
- Hantro driver got support for G2/HEVC decoder
- av7710 is moving to staging, together with some legacy APIs
- several cleanups related to compat_ioctl32 code
- Move the MPEG-2 stateless control type out of staging
- Address several issues with RPM get logic on media drivers
- Lots of cleanups, bug fixes and improvements.
* tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: s5p-mfc: Fix display delay control creation
media: mtk-vpu: on suspend, read/write regs only if vpu is running
media: video-mux: Skip dangling endpoints
media: Fix Media Controller API config checks
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Report camera module name
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embed 'serializer' field
media: i2c: rdacm21: Power up OV10640 before OV490
media: i2c: rdacm21: Fix OV10640 powerup
media: i2c: rdacm21: Add delay after OV490 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9271: Check max9271_write() return
media: i2c: max9286: Rework comments in .bound()
media: i2c: max9286: Define high channel amplitude
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Adjust parameters indent
media: hantro: add support for Rockchip RK3036
...
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of live migration
- Support for initializing the PDPTRs without loading them from memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this has
been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on
AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDV9UYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIRgf/XX8fKLh24RnTOs2ldIu2AfRGVrT4
QMrr8MxhmtukBAszk2xKvBt8/6gkUjdaIC3xqEnVjxaDaUvZaEtP7CQlF5JV45rn
iv1zyxUKucXrnIOr+gCioIT7qBlh207zV35ArKioP9Y83cWx9uAs22pfr6g+7RxO
h8bJZlJbSG6IGr3voANCIb9UyjU1V/l8iEHqRwhmr/A5rARPfD7g8lfMEQeGkzX6
+/UydX2fumB3tl8e2iMQj6vLVdSOsCkehvpHK+Z33EpkKhan7GwZ2sZ05WmXV/nY
QLAYfD10KegoNWl5Ay4GTp4hEAIYVrRJCLC+wnLdc0U8udbfCuTC31LK4w==
=NcRh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This covers all architectures (except MIPS) so I don't expect any
other feature pull requests this merge window.
ARM:
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration and
apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical
address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of
live migration
- Support for initializing the PDPTRs without loading them from
memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this
has been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM
registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
on AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
kvm: x86: disable the narrow guest module parameter on unload
selftests: kvm: Allows userspace to handle emulation errors.
kvm: x86: Allow userspace to handle emulation errors
KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
KVM: x86: Enhance comments for MMU roles and nested transition trickiness
KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
KVM: x86/mmu: Use MMU's role to determine PTTYPE
KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
KVM: x86/mmu: Add a helper to calculate root from role_regs
KVM: x86/mmu: Add helper to update paging metadata
KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
KVM: x86/mmu: Get nested MMU's root level from the MMU's role
...
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
-----BEGIN PGP SIGNATURE-----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=nFvj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-06-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes berg says:
====================
Lots of changes:
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow
the flexible utilization of SMT siblings, without exposing
untrusted domains to information leaks & side channels, plus
to ensure more deterministic computing performance on SMT
systems used by heterogenous workloads.
There's new prctls to set core scheduling groups, which
allows more flexible management of workloads that can share
siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve
'memcache'-like workloads.
- "Age" (decay) average idle time, to better track & improve workloads
such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked
via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable
it at runtime if tooling needs it. Use static keys and
other optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3VDr
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every
architecture to ARCH_ATOMIC, then get rid of ARCH_ATOMIC
and all the transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that
doesn't set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit
setting of FLAGS_CLOCKRT & invert the flag's meaning
to avoid having to introduce a new variant was
resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tH//
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every architecture
to ARCH_ATOMIC, then get rid of ARCH_ATOMIC and all the
transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that doesn't
set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit setting of
FLAGS_CLOCKRT & invert the flag's meaning to avoid having to
introduce a new variant was resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
* tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
locking/lockdep: Correct the description error for check_redundant()
futex: Provide FUTEX_LOCK_PI2 to support clock selection
futex: Prepare futex_lock_pi() for runtime clock selection
lockdep/selftest: Remove wait-type RCU_CALLBACK tests
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
lockdep: Fix wait-type for empty stack
locking/selftests: Add a selftest for check_irq_usage()
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
locking/lockdep: Remove the unnecessary trace saving
locking/lockdep: Fix the dep path printing for backwards BFS
selftests: futex: Add futex compare requeue test
selftests: futex: Add futex wait test
seqlock: Remove trailing semicolon in macros
locking/lockdep: Reduce LOCKDEP dependency list
locking/lockdep,doc: Improve readability of the block matrix
locking/atomics: atomic-instrumented: simplify ifdeffery
locking/atomic: delete !ARCH_ATOMIC remnants
locking/atomic: xtensa: move to ARCH_ATOMIC
locking/atomic: sparc: move to ARCH_ATOMIC
locking/atomic: sh: move to ARCH_ATOMIC
...
This ioctl request reads from uffdio_continue structure written by
userspace which justifies _IOC_WRITE flag. It also writes back to that
structure which justifies _IOC_READ flag.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: f619147104 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
-----BEGIN PGP SIGNATURE-----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=fWBV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
Add a fallback mechanism to the in-kernel instruction emulator that
allows userspace the opportunity to process an instruction the emulator
was unable to. When the in-kernel instruction emulator fails to process
an instruction it will either inject a #UD into the guest or exit to
userspace with exit reason KVM_INTERNAL_ERROR. This is because it does
not know how to proceed in an appropriate manner. This feature lets
userspace get involved to see if it can figure out a better path
forward.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210510144834.658457-2-aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.
Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.
Thus, this is following up on Eric's commit 3d368ab87c ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE. This is also in line in how we retrieve socket cookie
via SO_COOKIE.
[1] https://kind.sigs.k8s.io/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit defines the API for userspace and prepare the common
functionalities to support per VM/VCPU binary stats data readings.
The KVM stats now is only accessible by debugfs, which has some
shortcomings this change series are supposed to fix:
1. The current debugfs stats solution in KVM could be disabled
when kernel Lockdown mode is enabled, which is a potential
rick for production.
2. The current debugfs stats solution in KVM is organized as "one
stats per file", it is good for debugging, but not efficient
for production.
3. The stats read/clear in current debugfs solution in KVM are
protected by the global kvm_lock.
Besides that, there are some other benefits with this change:
1. All KVM VM/VCPU stats can be read out in a bulk by one copy
to userspace.
2. A schema is used to describe KVM statistics. From userspace's
perspective, the KVM statistics are self-describing.
3. With the fd-based solution, a separate telemetry would be able
to read KVM stats in a less privileged environment.
4. After the initial setup by reading in stats descriptors, a
telemetry only needs to read the stats data itself, no more
parsing or setup is needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-3-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDTZ30ACgkQJNaLcl1U
h9C5dQf6AjDh6y0SfB264cv2kSCLtYsOstSeamrEv3HBjqGiWEDgzfdB5Z+5d+EJ
ScWsfsZ8eMr7WcMZJ+wEGNKxcZO2uHEaC29dpNrDeE4Ffr9hsSucPhJ8Fm+K0qDH
VqX4kDPFY+OiuOf5RipDyAgoHo4zhIeaE9Rgxd4lbNH/xpWtgalN22iyYLpiYZLP
YJk+/8L37ZcKYX3uCImMEe4yseH3AFzGz7yi/tyyWCUP7GEwtWgzv2vadxewjY5E
h12ToqsTMQIrix0ZfMbYW9KJ7ANn6PFBz10vH8XuGbUlBW33pVzqP+Wr9adXGG4N
XLs6wRpbDbdJc3aDpDjA1nRlBl5XEg==
=h2+R
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Fixes for v5.13
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).
If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.
Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Skip non-SCTP packets in the new SCTP chunk support for nft_exthdr,
from Phil Sutter.
2) Simplify TCP option sanity check for TCP packets, also from Phil.
3) Add a new expression to store when the rule has been used last time.
4) Pass the hook state object to log function, from Florian Westphal.
5) Document the new sysctl knobs to tune the flowtable timeouts,
from Oz Shlomo.
6) Fix snprintf error check in the new nfnetlink_hook infrastructure,
from Dan Carpenter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contains two more urgent fixes, so that the
bigger FPU rework can base off ontop.
Signed-off-by: Borislav Petkov <bp@suse.de>
There shouldn't be any reason to ever use uncached over writecombine,
so just use writecombine for MSM_BO_UNCACHED.
Note: userspace never used MSM_BO_UNCACHED anyway
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a new cache mode for creating coherent host-cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Link: https://lore.kernel.org/r/20210423190833.25319-5-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
There may be cases where vendor-specific elements need to be
used over the air. Rather than have driver or firmware add
them and possibly cause problems that way, add them to the
iftype-data band capabilities. This way we can advertise to
userspace first, and use them in mac80211 next.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.e8c4f0347276.Iee5964682b3e9ec51fc1cd57a7c62383eaf6ddd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Backmerge tag 'v5.13-rc7' into drm-next
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
With this socket option, users can change probe_interval for
a transport, asoc or sock after it's created.
Note that if the change is for an asoc, also apply the change
to each transport in this asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aharon Landau says:
====================
In case device supports only real-time timestamp, the kernel will fail to
create QP despite rdma-core requested such timestamp type.
It is because device returns free-running timestamp, and the conversion
from free-running to real-time is performed in the user space.
This series fixes it, by returning real-time timestamp.
====================
* mlx5_realtime_ts:
RDMA/mlx5: Support real-time timestamp directly from the device
RDMA/mlx5: Refactor get_ts_format functions to simplify code
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc7' into rdma.git for-next
Linux 5.13-rc7
Needed for dependencies in following patches. Merge conflict in rxe_cmop.c
resolved by compining both patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'ETHTOOL_A_MODULE_EEPROM_DATA' is a binary attribute, not a nested one.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if the user asks for a real-time timestamp, the device will
return a free-running one, and the timestamp will be translated to
real-time in the user-space.
When the device supports only real-time timestamp and not free-running,
the creation of the QP will fail even though the user needs supported the
real-time one. To prevent this, we will return the real-time timestamp
directly from the device.
Link: https://lore.kernel.org/r/c6cfc8e6f038575c5c2de6505830f7e74e4de80d.1623829775.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.
Without a flexible array, this looks like an attempt to perform a memcpy()
read beyond the end of the packet->mad.data array:
drivers/infiniband/core/user_mad.c:
memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR);
Switch from [0] to [] to use the appropriately handled type for trailing
bytes.
Link: https://lore.kernel.org/r/20210616202615.1247242-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The FUTEX_LOCK_PI futex operand uses a CLOCK_REALTIME based absolute
timeout since it was implemented, but it does not require that the
FUTEX_CLOCK_REALTIME flag is set, because that was introduced later.
In theory as none of the user space implementations can set the
FUTEX_CLOCK_REALTIME flag on this operand, it would be possible to
creatively abuse it and make the meaning invers, i.e. select CLOCK_REALTIME
when not set and CLOCK_MONOTONIC when set. But that's a nasty hackery.
Another option would be to have a new FUTEX_CLOCK_MONOTONIC flag only for
FUTEX_LOCK_PI, but that's also awkward because it does not allow libraries
to handle the timeout clock selection consistently.
So provide a new FUTEX_LOCK_PI2 operand which implements the timeout
semantics which the other operands use and leave FUTEX_LOCK_PI alone.
Reported-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210422194705.440773992@linutronix.de
Now that we have H_RPT_INVALIDATE fully implemented, enable
support for the same via KVM_CAP_PPC_RPT_INVALIDATE KVM capability
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-6-bharata@linux.ibm.com
The VMM may not wish to have it's own mapping of guest memory mapped
with PROT_MTE because this causes problems if the VMM has tag checking
enabled (the guest controls the tags in physical RAM and it's unlikely
the tags are correct for the VMM).
Instead add a new ioctl which allows the VMM to easily read/write the
tags from guest memory, allowing the VMM's mapping to be non-PROT_MTE
while the VMM can still read/write the tags for the purpose of
migration.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-6-steven.price@arm.com
Add a new VM feature 'KVM_ARM_CAP_MTE' which enables memory tagging
for a VM. This will expose the feature to the guest and automatically
tag memory pages touched by the VM as PG_mte_tagged (and clear the tag
storage) to ensure that the guest cannot see stale tags, and so that
the tags are correctly saved/restored across swap.
Actually exposing the new capability to user space happens in a later
patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: move VM_SHARED sampling into the critical section]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-3-steven.price@arm.com
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.
Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h
Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A little bit of documentation covering the topics of engine discovery,
context engine maps and virtual engines. It is not very detailed but
supposed to be a starting point of giving a brief high level overview of
general principles and intended use cases.
v2:
* Have the text in uapi header and link from there.
v4:
* Link from driver-uapi.rst.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618150036.2507653-1-tvrtko.ursulin@linux.intel.com
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix
umem creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue
should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking
(staging: rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets
are validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xxUe
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
queue should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking (staging:
rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets are
validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing
wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel
egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming"
* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
net: ethernet: fix potential use-after-free in ec_bhf_remove
selftests/net: Add icmp.sh for testing ICMP dummy address responses
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
net: ll_temac: Fix TX BD buffer overwrite
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Make sure to free skb when it is completely used
MAINTAINERS: add Guvenc as SMC maintainer
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
bnxt_en: Fix TQM fastpath ring backing store computation
bnxt_en: Rediscover PHY capabilities after firmware reset
cxgb4: fix wrong shift.
mac80211: handle various extensible elements correctly
mac80211: reset profile_periodicity/ema_ap
cfg80211: avoid double free of PMSR request
cfg80211: make certificate generation more robust
mac80211: minstrel_ht: fix sample time check
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: cdc_eem: fix tx fixup skb leak
net: hamradio: fix memory leak in mkiss_close
...
Modify the pr_info content from int to char *, this looks more readable.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum_enabled in struct mptcp_sock,
used a dummy mptcp_is_checksum_enabled() helper to initialize it.
Also added a new member named mptcpi_csum_enabled in struct mptcp_info
to expose the csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IETF RFC 8986 [1] includes the definition of SRv6 End.DT4, End.DT6, and
End.DT46 Behaviors.
The current SRv6 code in the Linux kernel only implements End.DT4 and
End.DT6 which can be used respectively to support IPv4-in-IPv6 and
IPv6-in-IPv6 VPNs. With End.DT4 and End.DT6 it is not possible to create a
single SRv6 VPN tunnel to carry both IPv4 and IPv6 traffic.
The proposed End.DT46 implementation is meant to support the decapsulation
of IPv4 and IPv6 traffic coming from a single SRv6 tunnel.
The implementation of the SRv6 End.DT46 Behavior in the Linux kernel
greatly simplifies the setup and operations of SRv6 VPNs.
The SRv6 End.DT46 Behavior leverages the infrastructure of SRv6 End.DT{4,6}
Behaviors implemented so far, because it makes use of a VRF device in
order to force the routing lookup into the associated routing table.
To make the End.DT46 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one VRF
during the tunnel creation. Such constraint has to be enforced by enabling
the VRF strict_mode sysctl parameter, i.e.:
$ sysctl -wq net.vrf.strict_mode=1
Note that the same approach is used for the SRv6 End.DT4 Behavior and for
the End.DT6 Behavior in VRF mode.
The command used to instantiate an SRv6 End.DT46 Behavior is
straightforward, i.e.:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Performance and impact of SRv6 End.DT46 Behavior on the SRv6 Networking
=======================================================================
This patch aims to add the SRv6 End.DT46 Behavior with minimal impact on
the performance of SRv6 End.DT4 and End.DT6 Behaviors.
In order to verify this, we tested the performance of the newly introduced
SRv6 End.DT46 Behavior and compared it with the performance of SRv6
End.DT{4,6} Behaviors, considering both the patched kernel and the kernel
before applying the End.DT46 patch (referred to as vanilla kernel).
In details, the following decapsulation scenarios were considered:
1.a) IPv6 traffic in SRv6 End.DT46 Behavior on patched kernel;
1.b) IPv4 traffic in SRv6 End.DT46 Behavior on patched kernel;
2.a) SRv6 End.DT6 Behavior (VRF mode) on patched kernel;
2.b) SRv6 End.DT4 Behavior on patched kernel;
3.a) SRv6 End.DT6 Behavior (VRF mode) on vanilla kernel (without the
End.DT46 patch);
3.b) SRv6 End.DT4 Behavior on vanilla kernel (without the End.DT46 patch).
All tests were performed on a testbed deployed on the CloudLab [2]
facilities. We considered IPv{4,6} traffic handled by a single core (at 2.4
GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.13-rc1 using packets of size
~ 100 bytes.
Scenario (1.a): average 684.70 kpps; std. dev. 0.7 kpps;
Scenario (1.b): average 711.69 kpps; std. dev. 1.2 kpps;
Scenario (2.a): average 690.70 kpps; std. dev. 1.2 kpps;
Scenario (2.b): average 722.22 kpps; std. dev. 1.7 kpps;
Scenario (3.a): average 690.02 kpps; std. dev. 2.6 kpps;
Scenario (3.b): average 721.91 kpps; std. dev. 1.2 kpps;
Considering the results for the patched kernel (1.a, 1.b, 2.a, 2.b) we
observe that the performance degradation incurred in using End.DT46 rather
than End.DT6 and End.DT4 respectively for IPv6 and IPv4 traffic is minimal,
around 0.9% and 1.5%. Such very minimal performance degradation is the
price to be paid if one prefers to use a single tunnel capable of handling
both types of traffic (IPv4 and IPv6).
Comparing the results for End.DT4 and End.DT6 under the patched and the
vanilla kernel (2.a, 2.b, 3.a, 3.b) we observe that the introduction of the
End.DT46 patch has no impact on the performance of End.DT4 and End.DT6.
[2] https://www.cloudlab.us
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a system with multiple ASICs, there is a need to provide monitoring
tools with information on how long a device was opened and how many
times a device was opened.
Therefore, we add a new opcode to the INFO ioctl to provide that
information.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Sometimes it is useful to allow the command to continue running despite
the timeout occurred, to differentiate between really stuck or just very
time consuming commands. This can be achieved by passing a new debug
flag alongside the cs, HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT.
Anyway, if the timeout occurred, a warning print shall be issued,
however this shall not fail the submission.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a37: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d86a: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds a new "DMA Buffer ioctls" section to the dma-buf docs and adds
documentation for DMA_BUF_IOCTL_SYNC.
v2 (Daniel Vetter):
- Fix a couple typos
- Add commentary about synchronization with other devices
- Use item list format for describing flags
v3 (Pekka Paalanen):
- Clarify stalling requirements.
- Be more clear that that DMA_BUF_IOCTL_SYNC with SINC_END has to be
called before more GPU work happens.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617194258.579011-1-jason@jlekstrand.net
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Th_strings arrays netdev_features_strings, tunable_strings, and
phy_tunable_strings has been moved to file net/ethtool/common.c.
So fixes the comment.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This hypercall is used by the SEV guest to notify a change in the page
encryption status to the hypervisor. The hypercall should be invoked
only when the encryption attribute is changed from encrypted -> decrypted
and vice versa. By default all guest pages are considered encrypted.
The hypercall exits to userspace to manage the guest shared regions and
integrate with the userspace VMM's migration code.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <90778988e1ee01926ff9cac447aacb745f954c8c.1623174621.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a new version of KVM_GET_SREGS / KVM_SET_SREGS.
It has the following changes:
* Has flags for future extensions
* Has vcpu's PDPTRs, allowing to save/restore them on migration.
* Lacks obsolete interrupt bitmap (done now via KVM_SET_VCPU_EVENTS)
New capability, KVM_CAP_SREGS2 is added to signal
the userspace of this ioctl.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modeled after KVM_CAP_ENFORCE_PV_FEATURE_CPUID, the new capability allows
for limiting Hyper-V features to those exposed to the guest in Hyper-V
CPUIDs (0x40000003, 0x40000004, ...).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDLL74ACgkQnJ2qBz9k
QNleSAf/XikH+tsM6K9yDEeU93GGSqKUB71n9clSQBIiGZ7/UliG0wotrUjec9Rg
vBTZlh3JEdfboeBei+mG3hmOdAoYK4HMsJJikqRGPyWOTujh1eOZlT1LOXaY5zNM
631A9pWe8edlpr4Mq7Wb4nO4FToEZ91iXDLliFF371aV8kP/yuv5ZjHwIn5Pt5gI
DPnWwaJ+meW9KZ4gVKAfvZLVkKFat2xJ9r2LDpqbIkH9SBcfjBmeHOy0gFyCKx6l
yma5iANgtWLhesP6ZwSeaRb1+T9altSLCCFZrYdKH9PXTMFUqzrbiZ8tfVmllePZ
GaUOWcHYiLmvqvXnaAREiHnMFT6prg==
=kevs
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and fanotify fixes from Jan Kara:
"A fixup finishing disabling of quotactl_path() syscall (I've missed
archs using different way to declare syscalls) and a fix of an fd leak
in error handling path of fanotify"
* tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: finish disable quotactl_path syscall
fanotify: fix copy_event_to_user() fid error clean up
io-wq defaults to per-node masks for IO workers. This works fine by
default, but isn't particularly handy for workloads that prefer more
specific affinities, for either performance or isolation reasons.
This adds IORING_REGISTER_IOWQ_AFF that allows the user to pass in a CPU
mask that is then applied to IO thread workers, and an
IORING_UNREGISTER_IOWQ_AFF that simply resets the masks back to the
default of per-node.
Note that no care is given to existing IO threads, they will need to go
through a reschedule before the affinity is correct if they are already
running or sleeping.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new optional expression that tells you when last matching on a
given rule / set element element has happened.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add support to collect more detailed SMC fallback reason statistics and
provide these statistics to user space on the netlink interface.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the netlink function which collects the statistics information and
delivers it to the userspace.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While events can already be enabled and disabled via the generic request
IOCTL, this bypasses the internal reference counting mechanism of the
controller. Due to that, disabling an event will turn it off regardless
of any other client having requested said event, which may break
functionality of that client.
To solve this, add IOCTLs wrapping the ssam_controller_event_enable()
and ssam_controller_event_disable() functions, which have been
previously introduced for this specific purpose.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, debugging unknown events requires writing a custom driver.
This is somewhat difficult, slow to adapt, and not entirely
user-friendly for quickly trying to figure out things on devices of some
third-party user. We can do better. We already have a user-space
interface intended for debugging SAM EC requests, so let's add support
for receiving events to that.
This commit provides support for receiving events by reading from the
controller file. It additionally introduces two new IOCTLs to control
which event categories will be forwarded. Specifically, a user-space
client can specify which target categories it wants to receive events
from by registering the corresponding notifier(s) via the IOCTLs and
after that, read the received events by reading from the controller
device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT
to check if the attached eBPF program is capable of migrating sockets. When
the eBPF program is attached, we run it for socket migration if the
expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or
net.ipv4.tcp_migrate_req is enabled.
Currently, the expected_attach_type is not enforced for the
BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the
earlier idea in the commit aac3fc320d ("bpf: Post-hooks for sys_bind") to
fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type().
Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to
select a new listener based on the child socket. migrating_sk varies
depending on if it is migrating a request in the accept queue or during
3WHS.
- accept_queue : sock (ESTABLISHED/SYN_RECV)
- 3WHS : request_sock (NEW_SYN_RECV)
In the eBPF program, we can select a new listener by
BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning
SK_DROP. This feature is useful when listeners have different settings at
the socket API level or when we want to free resources as soon as possible.
- SK_PASS with selected_sk, select it as a new listener
- SK_PASS with selected_sk NULL, fallbacks to the random selection
- SK_DROP, cancel the migration.
There is a noteworthy point. We select a listening socket in three places,
but we do not have struct skb at closing a listener or retransmitting a
SYN+ACK. On the other hand, some helper functions do not expect skb is NULL
(e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer()
in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb
temporarily before running the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
We will call sock_reuseport.prog for socket migration in the next commit,
so the eBPF program has to know which listener is closing to select a new
listener.
We can currently get a unique ID of each listener in the userspace by
calling bpf_map_lookup_elem() for BPF_MAP_TYPE_REUSEPORT_SOCKARRAY map.
This patch makes the pointer of sk available in sk_reuseport_md so that we
can get the ID by BPF_FUNC_get_socket_cookie() in the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201119001154.kapwihc2plp4f7zc@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-9-kuniyu@amazon.co.jp
In commit 5b9fedb31e ("quota: Disable quotactl_path syscall") Jan Kara
disabled quotactl_path syscall on several architectures.
This commit disables it on all architectures using unified list of
system calls:
- arm64
- arc
- csky
- h8300
- hexagon
- nds32
- nios2
- openrisc
- riscv (32/64)
CC: Jan Kara <jack@suse.cz>
CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/lkml/20210512153621.n5u43jsytbik4yze@wittgenstein
Link: https://lore.kernel.org/r/20210614153712.313707-1-marcin@juszkiewicz.com.pl
Fixes: 5b9fedb31e ("quota: Disable quotactl_path syscall")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Some of the commands have already been defined for the support of RAW
commands (to be blocked). Unlike their usage in the RAW interface, when
used through the supported interface, they will be coordinated and
marshalled along with other commands being issued by userspace and the
driver itself. That coordination will be added later.
The list of commands was determined based on the learnings from
libnvdimm and this list is provided directly from Dan.
Recommended-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210413140907.534404-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into tty-next
We want the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into char-misc-next
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe
Dave Jiang
farah kassabri
Ohad Sharabi
Yuri Nudelman
Rocco Yue
David S. Miller
Jakub Kicinski
Johannes Berg
Dave Airlie
Daniel Xu
Pavel Begunkov
James Smart
Yufeng Mo
Dave Marchevsky
Dmitry Kadashev
Linus Torvalds
Kareem Shaik
Boris Burkov
Viresh Kumar
Jing Zhang
Nikolay Aleksandrov
Jie Deng
Damien Le Moal
Geliang Tang
NeilBrown
John Crispin
Andrii Nakryiko
Guangbin Huang
Christoph Hellwig
Cai Huoqing
Takashi Iwai
Emmanuel Grumbach
Arnd Bergmann
Tushar Sugandhi
Mikko Perttunen
Matthew Bobrowski
Greg Kroah-Hartman
Vinod Koul
Felix Kuehling
Pablo Neira Ayuso
Mauro Carvalho Chehab
Florian Westphal
Gustavo A. R. Silva
Chris Wilson
Igor Skalkin
Stanimir Varbanov
Pavel Tikhomirov
Oleksij Rempel
Bodo Stroesser
Hangbin Liu
Matteo Croce
Oliver Hartkopp
Simon Ser
Cong Wang
Matt Johnston
Jeremy Kerr
Pavel Skripkin
Peter Collingbourne
Tony Luck
Rob Clark
Peilin Ye
Balbir Singh
Matthew Brost
Mark Gray
Maarten Lankhorst
Maciej W. Rozycki
Eric W. Biederman
Normunds Rieksts
Matthew Auld
Justin Iurman
Steffen Klassert
Juan A. Suarez Romero
Lior Nahmanson
Jiri Olsa
Alexei Starovoitov
Kuniyuki Iwashima
Rodrigo Vivi
Lukas Bulwahn
Hans Verkuil
Mike Rapoport
Jason Ekstrand
Zvi Effron
Duncan Roe
Krzysztof Wilczyński
Zhu Lingshan
Yangbo Lu
David Hildenbrand
Feng Tang
Axel Rasmussen
Prasanna Kumar Kalever
Rodrigo Campos
Gleb Fotengauer-Malinovskiy
Paolo Bonzini
Aaron Lewis
Martynas Pumputis
Borislav Petkov
Jonathan Marek
Avraham Stern
Xin Long
Jason Gunthorpe
Ido Schimmel
Aharon Landau
Kees Cook
Thomas Gleixner
Bharata B Rao
Steven Price
David Sterba
Greg Kurz
Devesh Sharma
Tvrtko Ursulin
Yejune Deng
Toke Høiland-Jørgensen
Geliang Tang
Andrea Mayer
Ingo Molnar
Jian Shen
Ashish Kalra
Maxim Levitsky
Vitaly Kuznetsov
Bob Pearson
Guvenc Gulce
Maximilian Luz
Marcin Juszkiewicz
Ben Widawsky
Leandro Ribeiro
Thomas Zimmermann