Граф коммитов

1073 Коммитов

Автор SHA1 Сообщение Дата
Libo Chen ae647589a4 drivers/pcmcia/pd6729.c: convert to module_pci_driver
Use module_pci_driver instead of init/exit, make code clean.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 08:54:25 -07:00
Yinghai Lu 928bea9648 PCI: Delay enabling bridges until they're needed
We currently enable PCI bridges after scanning a bus and assigning
resources.  This is often done in arch code.

This patch changes this so we don't enable a bridge until necessary, i.e.,
until we enable a PCI device behind the bridge.  We do this in the generic
pci_enable_device() path, so this also removes the arch-specific code to
enable bridges.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-25 12:35:03 -06:00
Linus Torvalds fc76a258d4 Driver core patches for 3.11-rc1
Here's the big driver core merge for 3.11-rc1
 
 Lots of little things, and larger firmware subsystem updates, all
 described in the shortlog.  Nice thing here is that we finally get rid
 of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
 been always on for a number of kernel releases, now it's just removed.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0
 LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB
 =020+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the big driver core merge for 3.11-rc1

  Lots of little things, and larger firmware subsystem updates, all
  described in the shortlog.  Nice thing here is that we finally get rid
  of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
  been always on for a number of kernel releases, now it's just
  removed)"

* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
  driver core: device.h: fix doc compilation warnings
  firmware loader: fix another compile warning with PM_SLEEP unset
  build some drivers only when compile-testing
  firmware loader: fix compile warning with PM_SLEEP set
  kobject: sanitize argument for format string
  sysfs_notify is only possible on file attributes
  firmware loader: simplify holding module for request_firmware
  firmware loader: don't export cache_firmware and uncache_firmware
  drivers/base: Use attribute groups to create sysfs memory files
  firmware loader: fix compile warning
  firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
  Documentation: Updated broken link in HOWTO
  Finally eradicate CONFIG_HOTPLUG
  driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
  driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
  Documentation: Tidy up some drivers/base/core.c kerneldoc content.
  platform_device: use a macro instead of platform_driver_register
  firmware: move EXPORT_SYMBOL annotations
  firmware: Avoid deadlock of usermodehelper lock at shutdown
  dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
  ...
2013-07-02 11:44:19 -07:00
Alexander Shiyan ea6add0bf1 pcmcia: Remove ARCH_CLPS711X dependency
No dependencies of PCMCIA and ARCH_CLPS711X.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 16:41:49 -07:00
Wei Yongjun 214da6728a pcmcia: pd6729: fix error return code in pd6729_pci_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-08 22:38:17 -07:00
Laurent Navet d652f7022b pcmcia/trivial: at91_cf: fix checkpatch error
fix this checkpatch error:
- ERROR: switch and case should be at the same indent

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:42 -07:00
Fabio Porcedda 43f5075225 pcmcia: at91_cf: use module_platform_driver_probe()
Use module_platform_driver_probe() macro which makes the code smaller
and simpler.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:42 -07:00
Joachim Eastwood ed9084ecfc pcmcia: at91_cf: add support for DT
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:42 -07:00
Joachim Eastwood a843168dc9 pcmcia: at91_cf: clean up header includes
Use includes from linux/ instead of asm/ and remove a
unnecessary mach/ include.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:42 -07:00
Joachim Eastwood 54fe15918b pcmcia: at91_cf: use devm_ functions for allocations
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:42 -07:00
Joachim Eastwood 40ca0209ba pcmcia: at91_cf: convert to dev_ print functions
Convert all pr_* functions to equivalent dev_* functions and
drop the driver_name variable.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:41 -07:00
Joachim Eastwood e39506b466 pcmcia: at91_cf: fix gpio_get_value in at91_cf_get_status
Commit 80af9e6d (pcmcia at91_cf: fix raw gpio number usage) forgot
to change the parameter in gpio_get_value after adding gpio
validation.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:57:41 -07:00
Stephen Rothwell 40b313608a Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:20:18 -07:00
Artem Bityutskiy 5950f0803c pcmcia: remove RPX board stuff
The RPX board is not supported by the kernel because CONFIG_RPXCLASSIC and
CONFIG_RPXLITE symbols and not defined anywhere. Clean-up the m8xx_pcmcia
driver a little bit.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:28:28 +01:00
Artem Bityutskiy 7136619ea0 pcmcia: remove Motorola MBX860 support
The CONFIG_MBX symbol is not defined anywhere in the kernel tree, which means
this platform is not supported by the Linux kernel and we can remove the
corresponding code from the 'm8xx_pcmcia' driver.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:28:26 +01:00
Linus Torvalds 9afa3195b9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Assorted tiny fixes queued in trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits)
  DocBook: update EXPORT_SYMBOL entry to point at export.h
  Documentation: update top level 00-INDEX file with new additions
  ARM: at91/ide: remove unsused at91-ide Kconfig entry
  percpu_counter.h: comment code for better readability
  x86, efi: fix comment typo in head_32.S
  IB: cxgb3: delay freeing mem untill entirely done with it
  net: mvneta: remove unneeded version.h include
  time: x86: report_lost_ticks doesn't exist any more
  pcmcia: avoid static analysis complaint about use-after-free
  fs/jfs: Fix typo in comment : 'how may' -> 'how many'
  of: add missing documentation for of_platform_populate()
  btrfs: remove unnecessary cur_trans set before goto loop in join_transaction
  sound: soc: Fix typo in sound/codecs
  treewide: Fix typo in various drivers
  btrfs: fix comment typos
  Update ibmvscsi module name in Kconfig.
  powerpc: fix typo (utilties -> utilities)
  of: fix spelling mistake in comment
  h8300: Fix home page URL in h8300/README
  xtensa: Fix home page URL in Kconfig
  ...
2013-02-21 17:40:58 -08:00
Linus Torvalds 7c2db36e73 Merge branch 'akpm' (incoming from Andrew)
Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...
2013-02-21 17:38:49 -08:00
Christian Lamparter 42b5dd5193 pcmcia: move unbind/rebind into dev_pm_ops.complete
Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.

The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time.  [...]"

However the situation really isn't quite that rigid.  In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended).  On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.

Still, it is considered bad form and should be avoided if possible."

(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:16 -08:00
Linus Torvalds 7ed214ac20 Char/Misc driver patches for 3.9-rc1
Here's the big char/misc driver patches for 3.9-rc1.
 
 Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
 extcon, vmci, etc.).
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
 x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
 =i5HH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
2013-02-21 13:57:13 -08:00
Jiri Kosina 617677295b Merge branch 'master' into for-next
Conflicts:
	drivers/devfreq/exynos4_bus.c

Sync with Linus' tree to be able to apply patches that are
against newer code (mvneta).
2013-01-29 10:48:30 +01:00
Jesper Juhl bec0b2ce83 pcmcia: avoid static analysis complaint about use-after-free
Coverity complains about a use after free for 'res1' and 'res2' since
we use the value of the pointers in a 'dev_dbg()' after they have been
freed. That's not really a problem, but it still seems cleaner to
defer freeing until we are completely done with the pointers.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-21 00:07:15 +01:00
Jean Delvare 811af97238 pcmcia/vrc4171: Add missing spinlock init
It doesn't seem this spinlock was properly initialized. This bug was
introduced by commit 7a410e8d4d.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 12:07:34 -08:00
Dan Carpenter 36c286d5a4 pcmcia: i82092: fix i82092aa_pci_remove()
Smatch complains because the call to
	pci_set_drvdata(dev, &sockets[i].socket);
is reading one step beyond the end of the sockets[] array.  It will
crash when we use it later.

The only place which uses pci_get_drvdata() is i82092aa_pci_remove().
That function should loop through all the sockets and unregister them.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 12:07:34 -08:00
Kees Cook 204911fb50 drivers/pcmcia: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Manuel Lauss <manuel.lauss@googlemail.com>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
CC: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-01-11 11:38:41 -08:00
Linus Torvalds 8287361abc ARM: arm-soc: Header cleanups
This is a collection of header file cleanups, mostly for OMAP and AT91,
 that keeps moving the platforms in the direction of multiplatform by
 removing the need for mach-dependent header files used in drivers and
 other places.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2reAAoJEIwa5zzehBx3Z/oQAIHp8aXbUD0GvbBPQ2vIydZ8
 Qfdh2ypbyFB9GSLmPP6BhurEFUcwmW3MH2r9Kq68omPt4XxrFEt1SdEn3TgZlhTY
 YYzEv2DLbWfmKCDBFAEFullsfVkrpggyou5ty30YVp/u2lVLvChpkciE5/9HADy5
 uoh/W2KZcLE51tvnbRy/1DBaOtxEdCjJ9hTaef7FCB9ugOG+yMDYwIPRW/b4fNA6
 o/1NuZTWp0H4ePRG2oqLxYnjSiF63DVTJZjSJ+c5gW34bWgh8+/xzaLFA9U++/ig
 meGUD1Oe65+ctr+Wk2mV29eb02jauUe6qvkwt+iFIDDopgc2mn5BcW+ENpgpjhe3
 6l3ClRd94qh4cMWzqDa5PZCdetshiKqSH2IGpKS/dHNB1h5sBP7CCbvbalwzWd5n
 qjfkPC7kSFyU3XV+9SEAXE6HLKsiMQy9kRcKOMdTE5BA4FEAZk0wfiG9WcVCvS2D
 9tDC3X0aScyXx4Mkd4wIAZVhY68QuI17fPft9zZSj691YiUW5cR2yF1qbCka0yd5
 pHu/QSZg1+dUitMUvMPQmWJ15jnAtEYUtV/8zQFFVchgkxlrW+UtvW3zxghB6D+J
 ZwcjAMfQQz9fLoMQXlVovjQIhYsjw3SlV62ReBH7eyPs3+KfPIBn7Ks6mVQs3dS5
 AMUWORsB5u92XHl9EL9C
 =aggA
 -----END PGP SIGNATURE-----

Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...
2012-12-12 11:45:16 -08:00
Bill Pemberton e765a02cb6 pcmcia: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:10:16 -08:00
Bill Pemberton 21fb7674c9 pcmcia: remove use of __devinitdata
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:10:16 -08:00
Bill Pemberton 34cdf25a12 pcmcia: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:10:16 -08:00
Bill Pemberton 96364e3a5c pcmcia: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:10:16 -08:00
Bill Pemberton 13ee2b943c pcmcia: remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:10:15 -08:00
Arnd Bergmann 8a6ff8a0a2 arm: at91: mach header cleanup
This first patch serie start the cleanup of the header in mach
 by moving all the platform data to include/linux/platform_data
 
 and move the board header and drivers header next to them
 
 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQmQMyAAoJEOrjwV5ZMRf2N8kP/1J2DI26zhNWGIdiTPFX/HXG
 o03lvElDKDDyNtC87gU2DnYkOdjFVRpagZxv089whDs4Lt22A8ClaxEFca9K1oPg
 XO0NtuHbTL3wGlPLJH4C90bpQWY4FyIQLMfPaMeifrP1OpRkeSWAYKfFUB/wOtRC
 KWNl+WmpBt9JN9H1RIezYxpRteC+wUBKpYVZkRdT3OkQ4/oMqDIWzZqkMCTKy+Bb
 Ucs9ZFqkJ/5fSGYjHLG34VpbepFKgCqeDVugz2v+7SHvIkl0/XbRhGOdxJek54GD
 0OW8Gg5Utw47YQ1uYDR3IM00cod41/l9NYMKZm/DIEUdvNP3Mp+/X0Knehov+O+7
 7Xs8eSzBHE0mRAx2as71av08PNptNVAcJh/UAO8PWE5yLGivGrp8kQWzJItnl2ma
 8GmIK26bmMAqGuR+wANrT/pCCW5kxALE8L1JnCMzjhv5TvKE88mjUZuVmNnZGCdY
 SE/hotD2c2asZ15zv52wrGGpOALW6ZaQdlRafuDli1/yHeJ1uPOWec7NKnzytDpL
 A0r22RDyvqR7N2hunFu2aO757ojAsIWS8qfF2Yztr0UaE6rC+aoYKBwTfzvC5yhh
 gaurkH8jCUJ9EHw+GBs1pZQK9wWaK7MrlNj7/mVZ1iXErWCHZYcYNbxlx/xAFzUv
 IoHsmg6lL5By3p3nvElG
 =c5hx
 -----END PGP SIGNATURE-----

Merge tag 'for-3.8-at91_header_clean' of git://github.com/at91linux/linux-at91 into next/headers

From Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>:
arm: at91: mach header cleanup

This first patch serie start the cleanup of the header in mach
by moving all the platform data to include/linux/platform_data

and move the board header and drivers header next to them

* tag 'for-3.8-at91_header_clean' of git://github.com/at91linux/linux-at91:
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-12 22:54:08 +01:00
Jean-Christophe PLAGNIOL-VILLARD bcd2360c1f arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06 20:29:33 +08:00
Olof Johansson 6d06721570 Merge branch 'depends/tty' into next/headers
Merging in Greg's tty tree including a cleanup patch needed by the OMAP serial
header cleanups.

* depends/tty: (305 commits)
  tty/serial/8250: Make omap hardware workarounds local to 8250.h
  serial/8250/8250_early: Prevent rounding error in uartclk
  serial: samsung: use clk_prepare_enable and clk_disable_unprepare
  TTY: Report warning when low_latency flag is wrongly used
  console: use might_sleep in console_lock
  TTY: move tty buffers to tty_port
  TTY: add port -> tty link
  TTY: tty_buffer, cache pointer to tty->buf
  TTY: move TTY_FLUSH* flags to tty_port
  TTY: n_tty, propagate n_tty_data
  TTY: move ldisc data from tty_struct: locks
  TTY: move ldisc data from tty_struct: read_* and echo_* and canon_* stuff
  TTY: move ldisc data from tty_struct: bitmaps
  TTY: move ldisc data from tty_struct: simple members
  TTY: n_tty, add ldisc data to n_tty
  TTY: audit, stop accessing tty->icount
  TTY: n_tty, remove bogus checks
  TTY: n_tty, simplify read_buf+echo_buf allocation
  TTY: hci_ldisc, remove invalid check in open
  TTY: ldisc, wait for idle ldisc in release
  ...
2012-11-05 10:09:12 -08:00
Olof Johansson 068a565afa Merge branch 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes
A collection of warning fixes on non-ARM code from Arnd Bergmann:

* 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
  USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit
  mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN
  SCSI: ARM: make fas216_dumpinfo function conditional
  SCSI: ARM: ncr5380/oak uses no interrupts
2012-10-19 15:40:18 -07:00
Tony Lindgren 54b693d467 ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1
We cannot keep this in plat as it causes problems
with the ARM single zImage support.

Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-pcmcia@lists.infradead.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 11:36:40 -07:00
Arnd Bergmann fdc858a466 pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
The sharpsl_pcmcia_ops structure gets passed into
sa11xx_drv_pcmcia_probe, where it gets accessed at run-time,
unlike all other pcmcia drivers that pass their structures
into platform_device_add_data, which makes a copy.

This means the gcc warning is valid and the structure
must not be marked as __initdata.

Without this patch, building collie_defconfig results in:

drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1
make[2]: *** [drivers/pcmcia] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Pavel Machek <pavel@suse.cz>
Cc: linux-pcmcia@lists.infradead.org
Cc: Jochen Friedrich <jochen@scram.de>
Cc: stable@vger.kernel.org
2012-10-12 17:43:26 +02:00
Linus Torvalds 9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00
Linus Torvalds 61464c8357 ARM: soc: general cleanups
This is a large branch that contains a handful of different cleanups:
 
 - Fixing up the I/O space remapping on PCI on ARM. This is a series
   from Rob Herring that restructures how all pci devices allocate I/O
   space, and it's part of the work to allow multiplatform kernels.
 - A number of cleanup series for OMAP, moving and removing some
   headers, sparse irq rework and in general preparation for
   multiplatform.
 - Final removal of all non-DT boards for Tegra, it is now
   device-tree-only!
 - Removal of a stale platform, nxp4008. It's an old mobile chipset
   that is no longer in use, and was very likely never really used with
   a mainline kernel. We have not been able to find anyone interested
   in keeping it around in the kernel.
 - Removal of the legacy dmaengine driver on tegra
 
 + A handful of other things that I haven't described above.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO1fAAoJEIwa5zzehBx3IPgP/jxoO1flVGNVf0reqqyDro/w
 prZmp8cNVH9uv8xG9n9vawObrMQ8M6jCJ449fEWuAZ58EXrpIPd0kkm/MOmxp8K1
 LNs+q2aXxWpD488+b3RK55g3fksqZutTbn3y6HNuCoLG9l8yT/95KX4IIzfEP2Ch
 1TCNHdkTbf37nTBOmKN0x1kahGpWDrOkf9ysHQq+DXAGF4uwNwtR194dqz3HbDND
 hZqRq7qCLn9OwGRGNicPFoB6UcxwZ/+/+u5sX7nqPGoiPofg977mhWk1DFO15EM3
 S+A6g0dZ+XLsL+fFtOl4snSmrG5Et6qTOP0/ItQJgTG+5YdCS09ohCWJwRCBHbgj
 M5arOkyGFdVAlvX7cUux374sMe0AcqUsEmt79mYuBpIE+pBJaRUoCgDcs9FDZeUB
 U6WcE4AkxMtW7DtmVW+mF4ls9/K6cRXgWMuHCUmt1o3m3Ly9ITT7j+ntXnD9nuYk
 ndoVLR6Vxk2BzlkD0JEtg7FRAS9Wgo2DBix05qM1Qkut2iIZRhFQlqJQpNbeNdii
 /3Lg/hqpAVTZKGCd+paegHez61meyFz2PB2IiE0JKANhKHRCWTWRGgKIXkGyCiXk
 wJ2iRCOlMEpmpJgCBzfI32ER/hnW4s64iDjgksEwz6pEt7xCbhwgmwrpf0H0KsSF
 rLroHOMqyISd/Ha52Vin
 =ck1u
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...
2012-10-01 18:19:05 -07:00
Linus Torvalds 47061eda25 ARM: soc: non-critical bug fixes
These were submitted as bug fixes before v3.6 but not considered important
 enough to be included in it. Some of them cross over to cleanup territory
 as well, and aren't strictly bugfixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO1wAAoJEIwa5zzehBx38h8P/3K6wurO/3mA/Bct6vA3eJcT
 9vqZ3zSEVewsF+IXIxs2F0aw2YYFUTrQ0OlLvHzYDUGB5TwYqRjbG1UR/RHiEQwD
 o3dS50rq5hIXeyw46cProEK4N1vnaiI2lVH/X6B+qfABbgS094EDBc8IQU0eDABb
 M0yuIMnQTfDH+JqVVO8d5m36oAwQ6ADzBRNE4l2V4jkCj4wtXFfOlMyHLBtWx2fy
 jWgPA9KYB1agIJ7RuVaS4/+7XK6QJJpltinlxNaQbxYt+CofqDA1dE/r846Jm7L9
 71sGo1PFhZolIsM4H70vf496hFMhzxxBupInKTERMMKZl36fwbndf3wrzGttfLRx
 B7o0fLUCzoC4ePBwZ8N532h9h70UcNNebZCxN7XD66UhochqB/e9hJHWsdZkOJos
 Qnsu5LiB7PfJYLlUgtvZ9W0S5D9QpjtoN9r3BMGg59F00Z2jGR54L9vGf46T1FlS
 GiPLPCB+tggRAsdZXJG7qkLncPINqUXmbtgT2p1ySrI9tCzJ/lfmZ3c8dBwJtVRM
 bOY+Hfwx2z7YgfVp8VtwK2wD2bOv0NRmxR+L/fTsVU5MZmS1e4TsL8figPjnakb8
 ZXqZEQhv1CWmYlif3nORfg4v65/NGh4+nw1618QwsS1tBbP705bUc7zVQ9hzk4IZ
 lHnQka17gG5eIaZIO0Au
 =bWnd
 -----END PGP SIGNATURE-----

Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical ARM soc bug fixes from Olof Johansson:
 "These were submitted as bug fixes before v3.6 but not considered
  important enough to be included in it.  Some of them cross over to
  cleanup territory as well, and aren't strictly bugfixes."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: nomadik: remove NAND_NO_READRDY use
  ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()
  ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata()
  ARM: S3C24XX: removes unnecessary semicolon
  ARM: S3C24xx: delete double assignment
  ARM: EXYNOS: fix address for EXYNOS4 MDMA1
  ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name
  ARM: ep93xx: Move ts72xx.h out of include/mach
  ARM: ep93xx: use __iomem pointers for MMIO
  ARM: msm: Fix early debug uart mapping on some memory configs
  ARM: msm: io: Change the default static iomappings to be shared
  ARM: msm: io: Remove 7x30 iomap region from 7x00
  ARM: msm: Remove call to missing FPGA init on 8660
  ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write
  ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save
  dma: tegra: make data used as *of_device_id.data const
  can: mpc5xxx_can: make data used as *of_device_id.data const
  macintosh/mediabay: make data used as *of_device_id.data const
  i2c/mpc: make data used as *of_device_id.data const
  mfd/da9052: make i2c_device_id array const
  ...
2012-10-01 18:02:07 -07:00
Olof Johansson e3a66aa33a Merge branch 'multiplatform/platform-data' into next/multiplatform
* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 01:07:21 -07:00
Wei Yongjun e09a716490 ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()
In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the error
handling should be replaced with IS_ERR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-09-21 15:33:58 +08:00
Tony Lindgren 70c494c312 ARM: OMAP1: Make plat/mux.h omap1 only
We are moving omap2+ to use the device tree based pinctrl-single.c
and will be removing the old mux framework. This will remove the
omap1 specific parts from plat-omap.

Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20 14:54:57 -07:00
Arnd Bergmann 293b2da1b6 ARM: pxa: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the pxa include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Acked-By: Stefan Schmidt <stefan@openezx.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Cc: Harald Welte <laforge@openezx.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Tomas Cech <sleep_walker@suse.cz>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: openezx-devel@lists.openezx.org
2012-09-14 11:18:10 +02:00
Bjorn Helgaas 0a14057731 pcmcia: Use common pci_stop_and_remove_bus_device()
Use pci_stop_and_remove_bus_device() like most other hotplug drivers
rather than the special-purpose "behind_bridge" variant.  This just
means we have to iterate through all the devices downstream of the
bridge ourselves, which is the same thing pci_stop_behind_bridge()
did.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2012-08-22 11:31:20 -06:00
Linus Torvalds cea8f46c36 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "First ARM push of this merge window, post me coming back from holiday.
  This is what has been in linux-next for the last few weeks.  Not much
  to say which isn't described by the commit summaries."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  ARM: 7463/1: topology: Update cpu_power according to DT information
  ARM: 7462/1: topology: factorize the update of sibling masks
  ARM: 7461/1: topology: Add arch_scale_freq_power function
  ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit}
  ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling
  ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path
  ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace
  ARM: 7452/1: delay: allow timer-based delay implementation to be selected
  ARM: 7451/1: arch timer: implement read_current_timer and get_cycles
  ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
  ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions
  ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
  ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines
  ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation
  ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process
  ARM: 7444/1: kernel: add arch-timer C3STOP feature
  ARM: 7460/1: remove asm/locks.h
  ARM: 7439/1: head.S: simplify initial page table mapping
  ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE
  ARM: 7436/1: Do not map the vectors page as write-through on UP systems
  ...
2012-07-27 15:14:26 -07:00
Russell King 3169663ac5 ARM: sa11x0/pxa: convert OS timer registers to IOMEM
Make the OS timer registers have IOMEM like properities so they can
be passed to readl_relaxed/writel_relaxed() et.al. rather than being
straight volatile dereferences.  Add linux/io.h includes where
required.

linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c,
 arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c
 drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c
from Arnd.

This fixes these warnings:

arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init':
arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type
arch/arm/mach-pxa/time.c: In function 'pxa_timer_init':
arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-09 17:37:35 +01:00
Yinghai Lu b918c62e08 PCI: replace struct pci_bus secondary/subordinate with busn_res
Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13 15:42:22 -06:00
Paul Parsons 95244306f6 pcmcia: add driver for hx4700
This patch adds support for the HP iPAQ hx4700 to the existing
pxa2xx-pcmcia driver.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-07 09:56:39 +08:00
Linus Torvalds a6f707b601 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia
Pull a few PCMCIA updates from Dominik Brodowski.

Fix up trivial conflict (modified code in question had been removed) in
drivers/pcmcia/soc_common.c.

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
  pcmcia at91_cf: fix raw gpio number usage
  ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
  pcmcia: Convert to DEFINE_PCI_DEVICE_TABLE
  pcmcia: convert drivers/pcmcia/* to use module_platform_driver()
  pcmcia: irq: Remove IRQF_DISABLED
2012-03-29 16:00:48 -07:00
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds 9e4db1c3ee Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...
2012-03-27 18:17:02 -07:00
Linus Torvalds 66f03c614c ARM: device tree work
Most of these patches convert code from using static platform data to
 describing the hardware in the device tree. This is only the first
 half of the changes for v3.4 because a lot of patches for this topic
 came in the last week before the merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/a2CrR//JCVInAQKYdxAAn+fs7yv+P4OWG/nIhGdnPw8MQ2u9fvqA
 pmNL3Jy0eVowbENDcRRZgfhZ3ZlWBGUYym7J1uiFSrmHyJPoMtMvVg0miPYxLlpE
 vr8bzuSfGOUOa7+Fk6kFVGxS3ZHZTsDvuhMQUIt/2jHgOaesqPvZ1FYFAj1bZ1fm
 2CnQoF3OfnWAngHtoBXtgJxp/1r7+pHlGVbPYpmtHtikl45NmhqWza58aSQBilr+
 S90cVeZs91gyveoxz5N+YrO8+Dx05te3mF+dwWuKC6aDC6d76fjLak54AvYv2Pzr
 I6iaQPV8GIsXi5R4wptmVQAc5mbk5oktxJ7hCIHrmaBiAXygoVAYoqcuumoO3QDb
 QKz10ga1yBYcKYrKvBzKxQrChw53IPU6po+Dd66ALJvLlc3KONksiJs5T/5Wma7P
 v3VPcmZwPrJQbz+fQu6FysHeYQY+wfiR5E9Yz2OXs+PtkSy9OYsFFirdhJeWUPgA
 ASjNLs1y5rxqrJBt7cjyQiBbIf1awGWyzF0yUNrlYHxmhJ6vcxHfrGoW38VRRCTM
 8+JcxOHPRYrPfY7we6zsOn7ZeTWJduoUEeTxDnVS3w3zUIKCvkvkpHaJDvHvYcui
 T/yJnXdUD2O3E5+5k/5cCyde8RbSB9gKsNpIMNkK5BLSmbux3C72dE0sMQFysahI
 hS8aDCDUQUU=
 =fMC+
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: device tree work" from Arnd Bergmann:
 "Most of these patches convert code from using static platform data to
  describing the hardware in the device tree.  This is only the first
  half of the changes for v3.4 because a lot of patches for this topic
  came in the last week before the merge window.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
  Document: devicetree: add OF documents for arch-mmp
  ARM: dts: append DTS file of pxa168
  ARM: mmp: append OF support on pxa168
  ARM: mmp: enable rtc clk in pxa168
  i2c: pxa: add OF support
  serial: pxa: add OF support
  arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  ARM: OMAP2+: Remove extra ifdefs for board-generic
  ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
  ASoC: DT: Add digital microphone binding to PAZ00 board.
  ARM: dt: Add ARM PMU to tegra*.dtsi
  ARM: at91: at91sam9x5cm/dt: add leds support
  ARM: at91: usb_a9g20/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add leds support
  ARM: at91: usb_a9g20/dt: add leds support
  ARM: at91/pio: add new PIO3 features
  ARM: at91: add sam9_smc.o to at91sam9x5 build
  ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
  ARM: at91/tc: add device tree support to atmel_tclib
  ...
2012-03-27 16:47:35 -07:00
Russell King 374da9da22 Merge branch 'sa1111' into sa11x0
Conflicts:
	arch/arm/common/sa1111.c
	arch/arm/mach-sa1100/neponset.c

Fixed:
	arch/arm/mach-sa1100/assabet.c
for the neponset changes
2012-03-25 23:54:16 +01:00
Russell King ea8c00ac18 ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
Move the PCMCIA interface register definitions into the driver, rather
than keeping them in a common place.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24 11:30:11 +00:00
Linus Torvalds 24613ff927 Merge branch 'pcmcia' of git://git.linaro.org/people/rmk/linux-arm
Pull #3 ARM updates from Russell King:
 "This adds gpio support to soc_common, allowing an amount of code to be
  deleted from each PCMCIA socket driver for the PXA/SA11x0 SoCs."

* 'pcmcia' of git://git.linaro.org/people/rmk/linux-arm:
  PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.
  PCMCIA: make lubbock socket driver part of sa1111_cs
  PCMCIA: add Kconfig control for building sa11xx_base.c
  PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_io
  PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure code
  PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers
  PCMCIA: soc_common: remove soc_pcmcia_*_irqs functions
  PCMCIA: sa11x0: h3600: convert to use new irq/gpio management
  PCMCIA: sa11x0: simpad: convert to use new irq/gpio management
  PCMCIA: sa11x0: shannon: convert to use new irq/gpio management
  PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystem
  PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management
  PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystem
  PCMCIA: sa11x0: cerf: convert to use new irq/gpio management
  PCMCIA: sa11x0: assabet: convert to use new irq/gpio management
  PCMCIA: sa1111: use new per-socket irq/gpio infrastructure
  PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management
  PCMCIA: soc_common: add GPIO support for card status signals
  PCMCIA: soc_common: move common initialization into soc_common
2012-03-23 17:37:40 -07:00
Linus Torvalds 475c77edf8 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
Pull PCI changes (including maintainer change) from Jesse Barnes:
 "This pull has some good cleanups from Bjorn and Yinghai, as well as
  some more code from Yinghai to better handle resource re-allocation
  when enabled.

  There's also a new initcall_debug feature from Arjan which will print
  out quirk timing information to help identify slow quirks for fixing
  or refinement (Yinghai sent in a few patches to do just that once the
  new debug code landed).

  Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas.
  He's been a core PCI and Linux contributor for some time now, and has
  kindly volunteered to take over.  I just don't feel I have the time
  for PCI review and work that it deserves lately (I've taken on some
  other projects), and haven't been as responsive lately as I'd like, so
  I approached Bjorn asking if he'd like to manage things.  He's going
  to give it a try, and I'm confident he'll do at least as well as I
  have in keeping the tree managed, patches flowing, and keeping things
  stable."

Fix up some fairly trivial conflicts due to other cleanups (mips device
resource fixup cleanups clashing with list handling cleanup, ppc iseries
removal clashing with pci_probe_only cleanup etc)

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits)
  PCI: Bjorn gets PCI hotplug too
  PCI: hand PCI maintenance over to Bjorn Helgaas
  unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h
  sparc/PCI: convert devtree and arch-probed bus addresses to resource
  powerpc/PCI: allow reallocation on PA Semi
  powerpc/PCI: convert devtree bus addresses to resource
  powerpc/PCI: compute I/O space bus-to-resource offset consistently
  arm/PCI: don't export pci_flags
  PCI: fix bridge I/O window bus-to-resource conversion
  x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()'
  PCI / PCIe: Introduce command line option to disable ARI
  PCI: make acpihp use __pci_remove_bus_device instead
  PCI: export __pci_remove_bus_device
  PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
  PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
  PCI: print out PCI device info along with duration
  PCI: Move "pci reassigndev resource alignment" out of quirks.c
  PCI: Use class for quirk for usb host controller fixup
  PCI: Use class for quirk for ti816x class fixup
  PCI: Use class for quirk for intel e100 interrupt fixup
  ...
2012-03-23 14:02:12 -07:00
Greg Kroah-Hartman 263a5c8e16 Merge 3.3-rc6 into driver-core-next
This was done to resolve a conflict in the drivers/base/cpu.c file.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 12:35:53 -08:00
Olof Johansson a58f67e70a Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dt
* 'dt' of git://github.com/hzhuang1/linux: (6 commits)
  Document: devicetree: add OF documents for arch-mmp
  ARM: dts: append DTS file of pxa168
  ARM: mmp: append OF support on pxa168
  ARM: mmp: enable rtc clk in pxa168
  i2c: pxa: add OF support
  serial: pxa: add OF support

  (plus update to v3.3-rc6)
2012-03-08 09:27:07 -08:00
Joachim Eastwood 80af9e6d7a pcmcia at91_cf: fix raw gpio number usage
This patches fixes two things:
* Use gpio_valid function to check gpio before usage
  This must be done after 63b4c29678 which uses -EINVAL for unused pin's
* Use gpio_to_irq to convert gpio's to irq
  The driver assumed a 1:1 mapping between gpio and irq numbers. This is no
  longer true after d0fbda9add.

Tested on custom RM9200 board with 8gb CF card.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:43:37 +01:00
Axel Lin f24fa8affe ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
If pxa2xx_drv_pcmcia_add_one fails, it will go to err1 error path.
Add a missing clk_put in the error path.

Checking the ret value after the for loop is redundant, it is always false.
Thus remove the redundant checking.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:43:37 +01:00
Axel Lin 2b2c5d8c1d pcmcia: Convert to DEFINE_PCI_DEVICE_TABLE
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables. Also convert to use PCI_DEVICE macro for better readablity.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:43:37 +01:00
Axel Lin 5d95f8e2dd pcmcia: convert drivers/pcmcia/* to use module_platform_driver()
This patch converts the drivers in drivers/pcmcia/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Marc Zyngier <maz@misterjones.org> [for the viper part]
Acked-by: Manuel Lauss <manuel.lauss@googlemail.com> [for the db1xxx_ss.c part]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:43:37 +01:00
Yong Zhang d571c79e86 pcmcia: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:43:36 +01:00
Arnd Bergmann 7eca30aef7 Merge branch 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup
* 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits)
  ARM: at91: properly sort dtb files in Makefile.boot
  ARM: at91: add at91sam9g25ek.dts in Makefile.boot
  ARM: at91/board-dt: drop default console
  Atmel: move console default platform_device to serial driver
  ARM: at91: merge SRAM Memory banks thanks to mirroring
  ARM: at91: finally drop at91_sys_read/write
  ARM: at91/rtc-at91sam9: pass the GPBR to use via resources
  ARM: at91:rtc/rtc-at91sam9: ioremap register bank
  ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
  ARM: at91/PMC: make register base soc independent
  ARM: at91/PMC: move assignment out of printf
  ARM: at91/pm_slowclock: add runtime detection of memory contoller
  ARM: at91: make sdram/ddr register base soc independent
  ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
  ARM: at91/pm_slowclock: function slow_clock() accepts parameters
  ARM: at91/pm_slowclock: rename register to named define
  ARM: at91/ST: remove not needed casts
  ARM: at91: make ST (System Timer) soc independent
  ARM: at91: make matrix register base soc independent
  ARM: at91/at91x40: remove use of at91_sys_read/write

Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board,
at91/pm_cleanup and at91/base.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-29 12:03:08 +00:00
Yinghai Lu 6754b9e9c3 PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
The old pci_remove_behind_bridge actually do stop and remove.

Make the name reflect that to reduce confusion.

Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27 12:14:55 -08:00
Jean-Christophe PLAGNIOL-VILLARD f363c407b4 ARM: at91: make sdram/ddr register base soc independent
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23 14:57:56 +01:00
Russell King ff80aa57cc PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:18 +00:00
Russell King 11990b2b28 PCMCIA: make lubbock socket driver part of sa1111_cs
Lubbock is just another SA1111 socket driver, so now that Kconfig has
better control of which files get built, we can sanitize the build
for this.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:18 +00:00
Russell King 136b758bbb PCMCIA: add Kconfig control for building sa11xx_base.c
sa11xx_base.c is currently built when either PCMCIA_SA1100 or
PCMCIA_SA1111 are selected.  Let's move the logic into Kconfig.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:14 +00:00
Russell King e2adbecfcb PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_io
sa1111_set_io() already contains the necessary locking within itself
to safely change the state of a set of GPIOs.  There's no need for
callers to protect this by disabling IRQs themselves.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:05 +00:00
Russell King 65c77dcaa4 PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure code
Pass along the sa1111_pcmcia_configure_socket() failure code to
higher levels, rather than just returning zero.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:04 +00:00
Russell King 1c3d038bd5 PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers
soc_common already initializes state.wrprot to zero, so explicitly
setting wrprot to zero in the socket drivers has no additional effect.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:04 +00:00
Russell King a7670151a4 PCMCIA: soc_common: remove soc_pcmcia_*_irqs functions
Now that we use gpios and gpio_to_irq() etc to manage the various card
status signals within soc_common, and all socket drivers are converted,
these functions are no longer used.  We can now get rid of these helper
functions.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:03 +00:00
Russell King 65474b457c PCMCIA: sa11x0: h3600: convert to use new irq/gpio management
Convert iPAQ socket driver to use the new irq/gpio management.  As
this already uses the GPIO subsystem, these changes are localized
to just the PCMCIA directory.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:03 +00:00
Russell King b1d8a5f917 PCMCIA: sa11x0: simpad: convert to use new irq/gpio management
Convert Simpad socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:03 +00:00
Russell King 3b61436a79 PCMCIA: sa11x0: shannon: convert to use new irq/gpio management
Convert Shannon socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:02 +00:00
Axel Lin 8fb28231a9 ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
If pxa2xx_drv_pcmcia_add_one fails, it will go to err1 error path.
Add a missing clk_put in the error path.

Checking the ret value after the for loop is redundant, it is always false.
Thus remove the redundant checking.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-16 10:41:23 +08:00
Russell King ae99ddbc97 ARM: sa1111: add platform enable/disable functions
Add platform hooks to be called when individual sa1111 devices are
enabled and disabled.  This will allow us to move some platform
specifics out of the individual drivers.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09 15:34:50 +00:00
Russell King 6ad1b61400 ARM: sa11x0: neponset: provide function to manipulate NCR_0
Rather than having direct register accesses to NCR_0 scattered amongst
the code, provide a function instead.  This contains the necessary
race protection for this platform, ensuring that updates to this
register are safe.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09 15:34:14 +00:00
Russell King 025e4ab3db pcmcia: fix socket refcount decrementing on each resume
This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e79882 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-08 19:03:51 -08:00
Russell King 76346a4eab PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystem
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem
instead.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:24 +00:00
Russell King 7cf779cb8d PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management
Convert Nanoengine socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:24 +00:00
Russell King bbb58a1210 PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystem
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem
instead.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:23 +00:00
Russell King f793e3ab9f PCMCIA: sa11x0: cerf: convert to use new irq/gpio management
Convert Cerf socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:23 +00:00
Russell King 03e0092c85 PCMCIA: sa11x0: assabet: convert to use new irq/gpio management
Convert Assabet socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:23 +00:00
Russell King 81f33c65e6 PCMCIA: sa1111: use new per-socket irq/gpio infrastructure
Convert sa1111 PCMCIA drivers to use the new per-socket irq/gpio
infrastructure.  As the core takes care of handling the IRQs, we
can get rid of sa1111_pcmcia_socket_init(), sa1111_pcmcia_socket_suspend(),
sa1111_pcmcia_hw_init() and sa1111_pcmcia_hw_shutdown(), as well
as the private IRQ table.

We remove the NCR_0 setting in Neponset, as this is duplicating
what's already done via configure_socket in suspend.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:23 +00:00
Russell King a9bb5a4bf9 PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management
Convert all the PXA platform socket drivers to use the new irq/gpio
management provided by soc_common.  This relieves these drivers from
having to do anything with these GPIOs other than provide the numbers
to soc_common.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04 14:32:22 +00:00
Greg Kroah-Hartman bd1d462e13 Merge 3.3-rc2 into the driver-core-next branch.
This was done to resolve a merge and build problem with the
drivers/acpi/processor_driver.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02 11:24:44 -08:00
Alan Stern ed283e9f0a USB/PCI/PCMCIA: Clean up new_id and remove_id sysfs attribute routines
This patch (as1514) cleans up some places where new_id and remove_id
sysfs attributes are created and deleted.  Handling both attributes in
a single routine rather than a pair of routines makes the code
smaller.  It also prevents certain kinds of errors, like one we
currently have in the USB subsystem: The removeid attribute is often
created even when newid isn't (because the driver's no_dynamid_id flag
is set).

In the case of the PCMCIA subsystem, the newid attribute is created
but never explicitly deleted.  The patch adds a deletion routine.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 17:04:39 -08:00
Russell King d9dc878769 PCMCIA: soc_common: add GPIO support for card status signals
Add GPIO support for reading the card status (card detect, ready,
battery voltage detect) signals into soc_common code.  As we want
interrupts from these GPIOs, this takes over the old irq handling
infrastructure for card status signals, which will now be managed
entirely by the soc_common code.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 19:57:24 +00:00
Russell King e0d21178ce PCMCIA: soc_common: move common initialization into soc_common
Move common socket initialization into soc_common.c.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 19:57:17 +00:00
Alan Stern cef9bc56e1 Dynamic ID addition doesn't need get_driver()
As part of the removal of get_driver()/put_driver(), this patch
(as1511) changes all the places that add dynamic IDs for drivers.
Since these additions are done by writing to the drivers' sysfs
attribute files, and the attributes are removed when the drivers are
unregistered, there is no reason to take an extra reference to the
drivers.

The one exception is the pci-stub driver, which calls pci_add_dynid()
as part of its registration.  But again, there's no reason to take an
extra reference here, because the driver can't be unloaded while it is
being registered.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 16:00:35 -08:00
Russell King 171cf94ccb PCMCIA: fix sa1111 oops on remove
The sa1111 socket driver oopses when removed:

Unable to handle kernel NULL pointer dereference at virtual address 000003b0
pgd = c1b40000
[000003b0] *pgd=00000000
Internal error: Oops: 41b43005 [#1]
Modules linked in:
CPU: 0    Not tainted  (3.3.0-rc1+ #744)
PC is at pcmcia_remove+0x3c/0x60
LR is at pcmcia_remove+0x34/0x60

This is because we try to dereference a NULL 's' to obtain the next
pointer.  Fix this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-24 21:33:26 +00:00
Linus Torvalds 4964e0664c Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
  MIPS: Delete unused function add_temporary_entry.
  MIPS: Set default pci cache line size.
  MIPS: Flush huge TLB
  MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  MIPS: Octeon: Add support for OCTEON II PCIe
  MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
  MIPS: Alchemy: Update cpu-feature-overrides
  MIPS: Alchemy: db1200: Improve PB1200 detection.
  MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  MIPS: Alchemy: irq: register pm at irq init time
  MIPS: Alchemy: Touchscreen support on DB1100
  MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
  net/irda: convert au1k_ir to platform driver.
  MIPS: Alchemy: remove unused board headers
  MTD: nand: make au1550nd.c a platform_driver
  MIPS: Netlogic: Mark Netlogic chips as SMT capable
  MIPS: Netlogic: Add support for XLP 3XX cores
  MIPS: Netlogic: Merge some of XLR/XLP wakup code
  MIPS: Netlogic: Add default XLP config.
  ...

Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile
2012-01-14 13:05:21 -08:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Axel Lin 34641de2ef pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
Since commit 6384fd "ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ",
I got buid errors due to implicit declaration of function 'IRQ_GPIO'.

Use common gpio_to_irq() to replace machine dependant macro IRQ_GPIO().

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-28 10:14:04 +00:00
Manuel Lauss 64cd04d0cf MIPS: Alchemy: Basic support for the DB1300 board.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2867/
Patchwork: https://patchwork.linux-mips.org/patch/2919/
Patchwork: https://patchwork.linux-mips.org/patch/2928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:06 +00:00
Manuel Lauss 3f724080a3 MIPS: Alchemy: remove PB1000 support
Noone seems to have test hardware or care anymore.  Drop PB1000 support
and along with it the old Alchemy PCMCIA socket driver.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/2881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:05 +00:00
Haojian Zhuang 951c486f62 driver: pcmcia: replace IRQ_GPIO() with gpio_to_irq()
Use common gpio_to_irq() to replace machine dependant macro IRQ_GPIO().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15 19:09:56 +08:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Russell King 7a3f8de5a3 ARM: PXA: fix includes in pxa2xx_cm_x2xx PCMCIA driver
The includes in the pxa2xx_cm_x2xx PCMCIA driver are rather random;
the driver doesn't require anything from these headers except the
cpu_is_xxx() macros which come from another include.

The concern is that it's getting these definitions via mach/system.h,
which is supposed to only be included by arch/arm/kernel/process.c.
As this header is scheduled for cleanup (and elimination) keeping
the status quo will cause build errors.  So lets fix properly and
independent of the future work.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05 22:26:46 +00:00
Russell King d5240dfd3c ARM: PXA: fix lubbock PCMCIA driver build error
Fix:

ERROR: "pxa2xx_configure_sockets" [drivers/pcmcia/pxa2xx_lubbock_cs.ko] undefined!

by exporting the required function.

Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05 19:09:40 +00:00
Linus Torvalds 68e24ba704 Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits)
  ARM: pxa/cm-x300: properly set bt_reset pin
  ARM: mmp: rename SHEEVAD to GPLUGD
  ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
  ARM: i.MX28: shift frac value in _CLK_SET_RATE
  plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
  ARM: mx5: fix clock usage for suspend
  ARM: pxa: use correct __iomem annotations
  ARM: pxa: sharpsl pm needs SPI
  ARM: pxa: centro and treo680 need palm27x
  ARM: pxa: make pxafb_smart_*() empty when not enabled
  ARM: pxa: select POWER_SUPPLY on raumfeld
  ARM: pxa: pxa95x is incompatible with earlier pxa
  ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
  ARM: pxa: pxa95x/saarb depends on pxa3xx code
  ARM: pxa: allow selecting just one of TREO680/CENTRO
  ARM: pxa: export symbols from pxa3xx-ulpi
  ARM: pxa: make zylonite_pxa*_init declaration match code
  ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available
  ARM: at91: add defconfig for at91sam9g45 family
  ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig
  ...
2011-11-01 19:55:06 -07:00
Paul Gortmaker 402b20de62 pcmcia: Add export.h to drivers/pcmcia as required.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:20 -04:00
Paul Gortmaker 3bf8d64d39 pcmcia: add module.h to db1xxx_ss.c since it is modular.
As we will get this after the module.h usage cleanup.

drivers/pcmcia/db1xxx_ss.c:577: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:20 -04:00
Arnd Bergmann 43872fa788 Merge branch 'depends/rmk/gpio' into next/fixes
This sorts out merge conflicts with the arm/gpio branch that
already got merged into mainline Linux.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 22:44:18 +01:00
Linus Torvalds ca90666287 Merge branch 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
  ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h>
  ARM: 7104/1: plat-pxa: break out GPIO driver specifics
  ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
  ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
  ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>
  ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
  ARM: 7083/1: rewrite U300 GPIO to use gpiolib
  ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
  ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
  ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
  ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
  ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
  ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
  ARM: 7057/1: mach-pnx4008: rename GPIO header
  ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h>
  ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
  ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
  ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
  ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
  ARM: 7043/1: mach-ixp2000: rename GPIO header
  ...

Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-27 08:39:10 +02:00
Jochen Friedrich de0bc0d1b0 ARM: 7024/1: simpad: Cleanup CS3 accessors.
- prepend CS3 accessors by simpad_ to indicate they
  are specific to simpad devices.
- use spinlock to protect shadow register.
- implement 8 read-only pins.
- use readl/writel macros so barriers are used where
  necessary.
- register CS3 as GPIO controller with 24 pins
  (16 output only and 8 input only).
- fix PCMCIA driver to access the read-only pins
  rather than the shadow register for status bits.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17 09:12:42 +01:00
Arnd Bergmann 97b09da4ee ARM: pxa: use correct __iomem annotations
This tries to clear up the confusion between integers and iomem pointers
in the marvell pxa platform. MMIO addresses are supposed to be __iomem*
values, in order to let the Linux type checking work correctly. This
patch moves the cast to __iomem as far back as possible, to the place
where the MMIO virtual address windows are defined.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-08 21:03:07 +08:00
Russell King 50ac01fbd2 ARM: gpio: pxa: convert drivers to use asm/gpio.h rather than mach/gpio.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08 14:28:08 +01:00
Linus Torvalds f33c596a2f Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  smc91c92_cs.c: fix bogus compiler warning
  orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002
  hostap_cs: support cards with "Version 01.02" as third product ID
  pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3
  pxa2xx pcmcia - stargate 2 use gpio array.
  pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.
  drivers:pcmcia:soc_common: make socket_init and socket_suspend optional
2011-07-31 06:23:08 -10:00
Jonathan Cameron 5be56a62a2 pxa2xx pcmcia - stargate 2 use gpio array.
Kill off the buff gpio as not used anywhere.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 17:55:15 +02:00
Jonathan Cameron 7594549e8a pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.
Now the are optional, let us get rid of the ones that don't have
any content.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 17:55:13 +02:00
Jonathan Cameron a747ce835e drivers:pcmcia:soc_common: make socket_init and socket_suspend optional
10 boards define these empty, probably indicating not everyone has a use for them.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 17:55:10 +02:00
Linus Torvalds d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Linus Torvalds ae4c42e4e4 Merge branch 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits)
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx
  ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210
  ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100
  ARM: S3C24XX: Use generic s3c_set_platdata for devices
  ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for NAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI
  ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON
  ARM: SAMSUNG: Use generic s3c_set_platdata for FB
  ARM: SAMSUNG: Use generic s3c_set_platdata for TS
  ARM: S3C64XX: Add PWM backlight support on SMDK6410
  ARM: S5P64X0: Add PWM backlight support on SMDK6450
  ARM: S5P64X0: Add PWM backlight support on SMDK6440
  ARM: S5PC100: Add PWM backlight support on SMDKC100
  ARM: S5PV210: Add PWM backlight support on SMDKV210
  ARM: EXYNOS4: Add PWM backlight support on SMDKC210
  ARM: EXYNOS4: Add PWM backlight support on SMDKV310
  ARM: SAMSUNG: Create a common infrastructure for PWM backlight support
  clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
2011-07-25 12:38:42 -07:00
Jiri Kosina b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Jonathan Cameron 226d3a1511 pcmcia: pxa2xx/trizeps4: remove unnecessary ifdefs
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11 14:43:33 +08:00
Dmitry Eremin-Solenikov b34e7b4f05 ARM: scoop: drop pcmcia_init callback
A pcmcia_init callback isn't used on any of the platforms. Drop it.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11 14:43:32 +08:00
Jonathan Cameron 512b7938fe pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11 14:26:34 +08:00
Randy Dunlap 158f1e9518 gpio: include linux/gpio.h where needed
Some files use GPIOF_ macros but don't include the header file
for them.  These macros are being moved to <linux/gpio.h>, so add
includes for <linux/gpio.h> where needed.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16 08:40:44 -06:00
Joe Perches 28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00
Joe Perches e9fb13bfec pcmcia: Make declaration and uses of struct pcmcia_device_id const
Const allows tables to be moved into text sections.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-05-06 07:46:15 +02:00
Uwe Kleine-König 37fac4b6e6 pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
sa11x0_pcmcia_hw_init is only used by sa11x0_drv_pcmcia_probe which
lives in .devinit.text so it can go to .devinit.data.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-05-06 07:46:11 +02:00
Lucas De Marchi e9c549998d Revert wrong fixes for common misspellings
These changes were incorrectly fixed by codespell. They were now
manually corrected.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-26 23:31:11 -07:00
Eric Miao 7db6a7fa09 ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()
This fixes the failure to register the IRQ_RTCAlrm alarm as a wakeup
event.  It is misinterpreted as a gpio irq not a PWER bitmask. Fixed
this by converting the incorrect IRQ_TO_IRQ() to a correct version of
irq_to_gpio().

Reported-by: Nick Bane <nickbane1@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-13 09:30:40 +08:00
Dmitry Eremin-Solenikov 735443fede pcmcia: limit pxa2xx_trizeps4 subdriver to trizeps4 platform
pxa2xx_trizeps4 tries to register pxa2xx-pcmcia device not checking whether
machine is really trizeps4, thus messing multi-machine kernels. Fix it up.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12 23:07:42 +08:00
Dmitry Eremin-Solenikov af21cbb1ef pcmcia: limit pxa2xx_balloon3 subdriver to balloon3 platform
pxa2xx_balloon3 tries to register pxa2xx-pcmcia device not checking whether
machine is really balloon3, thus messing multi-machine kernels. Fix it up.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12 23:07:42 +08:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 85eb1513c1 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (65 commits)
  ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support
  ARM: 6838/1: etm: fix section mismatch warning
  ARM: 6837/1: remove unused pci_fixup_prpmc1100
  ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn == PC
  Fix the broken build for Marvell Dove platform.
  ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency
  ARM: 6834/1: perf: reset counters on all CPUs during initialisation
  ARM: 6833/1: perf: add required isbs() to ARMv7 backend
  ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues
  ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile
  arm: mach-mx3: pcm043: add write-protect and card-detect for SD1
  eukrea_mbimxsd51: add SD Card detect
  eukrea_mbimxsd25-baseboard: add SD card detect
  mx3/eukrea_mbimxsd-baseboard: add SD card detect support
  mx3/eukrea_mbimxsd-baseboard: fix gpio request
  ARM: mxs/mx28evk: add mmc device
  ARM: mxs/mx23evk: add mmc device
  ARM: mxs: dynamically allocate mmc device
  ARM: mx51_efika: update platform data for new mfd changes
  mx2/iomux: Set direction for CSPI2 pins
  ...
2011-03-30 07:50:45 -07:00
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Russell King 938c0ace3f Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable
Conflicts:
	arch/arm/mach-pxa/tosa.c
2011-03-26 10:03:03 +00:00
Linus Torvalds 4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Marek Vasut 9ed3fbf1cb ARM: pxa: Update copyright notices for Palm devices
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-16 16:32:46 +08:00
Marek Vasut e27af7edda ARM: pxa: Use gpio arrays in vpac270_pcmcia driver
Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-16 16:32:46 +08:00
Marek Vasut 235a175c40 ARM: pxa: Use gpio arrays in palmtx_pcmcia driver
Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-16 16:32:46 +08:00
Marek Vasut ba38830794 ARM: pxa: Use gpio arrays in palmtc_pcmcia driver
Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-16 16:32:46 +08:00
Marek Vasut 2070417dff ARM: pxa: Use gpio arrays in palmld_pcmcia driver
Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-16 16:32:46 +08:00
Marek Vasut e593106ca4 ARM: pxa: Use gpio arrays in colibri_pcmcia driver
Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and
less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-16 16:32:45 +08:00
Linus Torvalds 34d4ade77b Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  davinci: cpufreq: fix section mismatch warning
  DaVinci: fix compilation warnings in <mach/clkdev.h>
  davinci: tnetv107x: fix register indexing for GPIOs numbers > 31
  davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio
  ARM: pxa/tosa: register wm9712 codec device
  ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform
  ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms
  ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now
  ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100
  ARM: 6761/1: Update number of VIC for S5PV210
  ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores
  ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request
  ARM: 6765/1: remove obsolete comment from asm/mach/arch.h
  ARM: 6757/1: fix tlb.h induced linux/swap.h build failure
2011-03-07 20:45:42 -08:00
Grant Likely 1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00
Dmitry Eremin-Solenikov 8d9bd9002d ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms
PXA supports multi-machine kernels since long ago. However a kernel
compiled with support for colibri and any other PXA machine and with
PCMCIA enabled will barf at runtime about duplicate registration of
pxa2xx-pcmcia device. Fix that.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-27 21:38:23 +08:00
Dominik Brodowski 33619f0d3f pcmcia: re-enable Zoomed Video support
Allow drivers to enable Zoomed Video support. Currently, this is only
used by out-of-tree drivers (L64020 DVB driver in particular).

CC: <stable@kernel.org> [for 2.6.37]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-20 12:47:34 +01:00
Pavel Machek 5b703683b6 pcmcia vs. MECR on pxa25x/sa1111
After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by
sa1111_pcmcia_add(). That unfortunately means that configure_sockets()
is not called, leading to MECR not being set properly, leading to
strange crashes.

Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps
cleaner solution exists?

Signed-off-by: Pavel Machek <pma@sysgo.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19 12:22:35 +01:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Russell King 404a02cbd2 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h
2011-01-06 22:33:32 +00:00
Russell King 31edf274f9 Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and 'versatile' into devel 2011-01-05 18:08:10 +00:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Marcelo Roberto Jimenez fa87672ab3 ARM: 6458/1: pcmcia: Adds nanoEngine PCMCIA support.
This patch adds nanoEngine PCMCIA support, with support for two sockets.

In order to have a fully functional pcmcia subsystem in a BSE
nanoEngine board you should carefully read this:

http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-21 14:53:45 +00:00
Marcelo Roberto Jimenez 17b38ebb6a ARM: 6457/1: pcmcia: Fix checkpatch.pl issues in drivers/pcmcia/soc_common.c.
This patch fixes checkpatch.pl issues in drivers/pcmcia/soc_common.c.

Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-21 14:53:44 +00:00
Marek Vasut 1b9169d8a0 ARM: pxa: Update Balloon3 for new FPGA firmware
The new FPGA firmware in Balloon3 uses different methods to control it's bus
control lines. In the new version, there are separate registers to set/clear
bus control lines. This patch updates affected places.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:14:02 +08:00
Marek Vasut fd62999bad ARM: pxa: Colibri PXA320 PCMCIA driver
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:07:44 +08:00
Marek Vasut 960c0acaab ARM: pxa: Toradex Colibri PXA270 CF support
This driver also contains structures to eventually support PXA320. This is
planned to be added in a later patch.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:07:39 +08:00
Marek Vasut a4257af5b0 ARM: pxa: Add pxa320 PCMCIA check
On PXA320, there's only one PCMCIA slot available. Check for cases where the
user would want to register multiple. Also, rework failpath.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:07:37 +08:00
Eric Miao 2a125dd56b ARM: pxa: remove get_memclk_frequency_10khz()
Introduce 'struct clk' for memory and remove
get_memclk_frequency_10khz().

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16 14:31:19 +08:00
Marek Vasut ad68bb9f7a ARM: pxa: Access SMEMC via virtual addresses
This is important because on PXA3xx, the physical mapping of SMEMC registers
differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx
and PXA320, the PCMCIA driver was adjusted accordingly as well.

Also, various places in the kernel had to be patched to use
__raw_read/__raw_write.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16 14:31:16 +08:00
Marcelo Roberto Jimenez b9f515e3e3 ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module.
This patch fixes a compilation issue when compiling PCMCIA SA1100
support as a module with PCMCIA_DEBUG enabled. The symbol
soc_pcmcia_debug was not beeing exported.
ARM: pcmcia: Fix for building DEBUG with sa11xx_base.c as a module.

This patch fixes a compilation issue when compiling PCMCIA SA1100
support as a module with PCMCIA_DEBUG enabled. The symbol
soc_pcmcia_debug was not beeing exported.

Cc: <stable@kernel.org>
Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-04 12:47:48 +00:00
Joe Perches 106665d937 drivers/pcmcia/soc_common.c: Use printf extension %pV
Using %pV reduces the number of printk calls and
eliminates any possible message interleaving from
other printk calls.

Signed-off-by: Joe Perches <joe@perches.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Eric Miao <eric.y.miao@gmail.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-11-10 14:31:28 +01:00
Uwe Kleine-König 5b85e04e93 pcmcia/sa1100: don't put machine specific init functions in .init.text
These are called by sa11x0_drv_pcmcia_probe (which is marked now with
__devinit) so they can go to .devinit.text now, too.

This fixes:

	WARNING: drivers/pcmcia/sa1100_cs.o(.text+0x10): Section mismatch in reference from the function sa11x0_drv_pcmcia_probe() to the function .init.text:pcmcia_simpad_init()
	The function sa11x0_drv_pcmcia_probe() references
	the function __init pcmcia_simpad_init().
	This is often because sa11x0_drv_pcmcia_probe lacks a __init
	annotation or the annotation of pcmcia_simpad_init is wrong.

and a similar warning for pcmcia_collie_init, pcmcia_cerf_init,
pcmcia_h3600_init and pcmcia_shannon_init.

While at it mark pcmcia_assabet_init with __devinit, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
CC: Russell King <linux@arm.linux.org.uk>
CC: Eric Miao <eric.y.miao@gmail.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-11-10 14:30:01 +01:00
Komuro 006839f12e pd6729: Coding Style fixes
pd6729: remove unnecessary space.

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-11-10 14:29:09 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Dominik Brodowski ff10fca5ce pcmcia: IOCARD is also required for using IRQs
Dave Hinds pointed out to me that 37979e1546 will break b43 and
ray_cs, as IOCARD is not -- as the name would suggest -- only needed
for cards using IO ports. Instead, as it re-deines several pins, it
is also required for using interrupts.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-22 08:46:36 +02:00
Justin P. Mattock 631dd1a885 Update broken web addresses in the kernel.
The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Ben Pfaff <blp@cs.stanford.edu>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18 11:03:14 +02:00
Tejun Heo 97299c7268 pcmcia: don't call flush_scheduled_work() spuriously
au100_generic and soc_common call flush_scheduled_work() spuriously.
Remove them.

This is to prepare for the deprecation and removal of
flush_scheduled_work().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-16 11:07:37 +02:00
Wolfram Sang a5360df941 pcmcia/yenta: guide users in case of problems with O2-bridges
Some cards need the speedups on, some need them off. As we can't detect
this reliably, at least give the users a hint how to tweak the system.

Reported-by: David Bluecame <david.bluecame@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-15 14:31:47 +02:00
Maciej Żenczykowski 3c7d2b765d pcmcia: fix unused function compile warning
pcmcia_socket_dev_resume() is only referenced from macro
SET_SYSTEM_SLEEP_PM_OPS(NULL, pcmcia_socket_dev_resume)
which based on CONFIG_PM_SLEEP may or may not actually
use its second parameter.

Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-14 11:47:16 +02:00
Rahul Ruikar 1ab488de54 pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
- pci_release_regions called during return error path.
- pci_disable_device called for cases where earlier it was enabled.
- code duplication avoided/reduced by adding resource release at goto statements.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-05 15:49:51 +02:00
Dominik Brodowski 1c4a77bf54 pcmcia: add a few debug statements
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:25 +02:00
Dominik Brodowski 2e9b981a7c pcmcia: move driver name to struct pcmcia_driver
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:24 +02:00
Dominik Brodowski 1cc745d1cd pcmcia: remove the "Finally, report what we've done" message
Remove this unnecessary message -- this info is either available
in sysfs or by enabling dynamic debug from the PCMCIA core.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: linux-usb@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:24 +02:00
Dominik Brodowski 00990e7ce0 pcmcia: use autoconfiguration feature for ioports and iomem
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding
fields in struct pcmcia_device *p_dev->resource[0,1,2] are set
accordinly. Drivers wishing to override certain settings may do so in
the callback function, but they no longer need to parse the CIS entries
stored in cistpl_cftable_entry_t themselves.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:24 +02:00
Dominik Brodowski 440eed43e2 pcmcia: introduce autoconfiguration feature
Introduce an autoconfiguration feature to set certain values in
pcmcia_loop_config(), instead of copying the same code over and over
in each PCMCIA driver. At first, introduce the following options:

CONF_AUTO_CHECK_VCC	check or matching Vcc entry
CONF_AUTO_SET_VPP	set Vpp
CONF_AUTO_AUDIO		enable the speaker line

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:23 +02:00
Dominik Brodowski 9485ee14e1 pcmcia: Documentation update
Fill in missing descriptions and update some others for functions in
pcmcia_resource.c.

Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:23 +02:00
Dominik Brodowski 1ac71e5a35 pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
pcmcia_enable_device() now replaces pcmcia_request_configuration().
Instead of config_req_t, all necessary flags are either passed as
a parameter to pcmcia_enable_device(), or (in rare circumstances)
set in struct pcmcia_device -> flags.

With the last remaining user of include/pcmcia/cs.h gone, remove
all references.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:23 +02:00
Dominik Brodowski 7feabb6412 pcmcia: move config_{base,index,regs} to struct pcmcia_device
Several drivers prefer to explicitly set config_{base,index,regs},
formerly known as ConfigBase, ConfigIndex and Present. Instead of
passing these values inside config_req_t, store it in struct
pcmcia_device.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:22 +02:00
Dominik Brodowski 37979e1546 pcmcia: simplify IntType
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO
(all other drivers). As this flags seems to relate to ioport access, make
it conditional to the driver having requested IO port access. There are two
drivers which do not request IO ports, but did set INT_MEMORY_AND_IO:
ray_cs and b43. For those, we consistently only set INT_MEMORY in future.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:22 +02:00
Dominik Brodowski fc30110103 pcmcia: simplify Status, ExtStatus register access
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were
only accessed to enable audio output for some drivers and IRQ for
serial_cs.c. The former also required setting config_req_t.Attributes
to CONF_ENABLE_SPKR; the latter can be simplified to setting this
field to CONF_ENABLE_ESR.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:22 +02:00
Dominik Brodowski 1a4a046030 pcmcia: remove Pin, Copy configuration register access
The "Pin" and "Copy" configuration registers (CISREG_SCR, CISREG_PPR)
do not seem to be utilized anywhere. If a device would request a
write to these registers, "0" would be written. Continue to do so, but
warn of unexpected behavior -- and remove the "Pin" and "Copy" entries
from config_req_t.

Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:21 +02:00
Dominik Brodowski e8405f0f61 pcmcia: move Vpp setup to struct pcmcia_device
Some drivers prefer to explicitly set Vpp. Instead of passing the
voltage inside config_req_t, store it in struct pcmcia_device.

CC: linux-ide@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-mtd@lists.infradead.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:21 +02:00
Dominik Brodowski fb49fa533f pcmcia: split up modify_configuration() into two fixup functions
pcmcia_modify_configuration() was only used by two drivers to fix up
one issue each: setting the Vpp to a different value, and reducing
the IO width to 8 bit. Introduce two explicitly named functions
handling these things, and remove one further typedef.

CC: netdev@vger.kernel.org
CC: linux-mtd@lists.infradead.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:21 +02:00
Dominik Brodowski cdb138080b pcmcia: do not use win_req_t when calling pcmcia_request_window()
Instead of win_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem
ranges. After a call to pcmcia_request_window(), the windows found there
are reserved and may be used until pcmcia_release_window() is called.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-mtd@lists.infradead.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:21 +02:00
Rahul Ruikar 40d24ff9b4 pcmcia: pd6729: Fix error path
In error return path
call pci_disable_device() which was enabled earlier.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-26 15:54:25 +02:00
Dominik Brodowski 7cdffc8652 pcmcia: preserve configuration information if request_io fails partly
If pcmcia_request_io() only fails partly -- for the second of two
requested resources -- preserve the configuration settings for the
first one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-18 16:30:18 +02:00
Dominik Brodowski eb838fe109 pcmcia: per-device, not per-socket debug messages
As the iomem / ioport setup differs per device, it is much better
to print out the device instead of the socket.

Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15 17:57:09 +02:00
Linus Torvalds 58d4ea65b9 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mmc_spi: Fix unterminated of_match_table
  of/sparc: fix build regression from of_device changes
  of/device: Replace struct of_device with struct platform_device
2010-08-12 09:11:31 -07:00
Russell King 0b019a4155 Merge branches 'master' and 'devel' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig
2010-08-10 23:17:52 +01:00
Linus Torvalds 1685e633b3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq
  pcmcia: do not request windows if you don't need to
  pcmcia: insert PCMCIA device resources into resource tree
  pcmcia: export resource information to sysfs
  pcmcia: use struct resource for PCMCIA devices, part 2
  pcmcia: remove memreq_t
  pcmcia: move local definitions out of include/pcmcia/cs.h
  pcmcia: do not use io_req_t when calling pcmcia_request_io()
  pcmcia: do not use io_req_t after call to pcmcia_request_io()
  pcmcia: use struct resource for PCMCIA devices
  pcmcia: clean up cs.h
  pcmcia: use pcmica_{read,write}_config_byte
  pcmcia: remove cs_types.h
  pcmcia: remove unused flag, simplify headers
  pcmcia: remove obsolete CS_EVENT_ definitions
  pcmcia: split up central event handler
  pcmcia: simplify event callback
  pcmcia: remove obsolete ioctl

Conflicts in:
 - drivers/staging/comedi/drivers/*
 - drivers/staging/wlags49_h2/wl_cs.c
due to dev_info_t and whitespace changes
2010-08-06 12:25:06 -07:00
Russell King f165eb77f4 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable
Conflicts:
	arch/arm/mach-pxa/palmt5.c
	arch/arm/mach-pxa/palmtreo.c
2010-08-06 18:10:25 +01:00
Grant Likely 2dc1158137 of/device: Replace struct of_device with struct platform_device
of_device is just an alias for platform_device, so remove it entirely.  Also
replace to_of_device() with to_platform_device() and update comment blocks.

This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.

@@
@@
-struct of_device
+struct platform_device

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-06 09:25:50 -06:00
Linus Torvalds c3d1f1746b Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits)
  MIPS: PowerTV: Separate PowerTV USB support from non-USB code
  MIPS: strip the un-needed sections of vmlinuz
  MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS
  MIPS: Clean up arch/mips/boot/compressed/decompress.c
  MIPS: Clean up arch/mips/boot/compressed/ld.script
  MIPS: Unify the suffix of compressed vmlinux.bin
  MIPS: PowerTV: Add Gaia platform definitions.
  MIPS: BCM47xx: Fix nvram_getenv return value.
  MIPS: Octeon: Allow more than 3.75GB of memory with PCIe
  MIPS: Clean up notify_die() usage.
  MIPS: Remove unused task_struct.trap_no field.
  Documentation: Mention that KProbes is supported on MIPS
  SAMPLES: kprobe_example: Make it print something on MIPS.
  MIPS: kprobe: Add support.
  MIPS: Add instrunction format for BREAK and SYSCALL
  MIPS: kprobes: Define regs_return_value()
  MIPS: Ritually kill stupid printk.
  MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts.
  MIPS: Octeon: Support 256 MSI on PCIe
  MIPS: Decode core number for R2 CPUs.
  ...
2010-08-05 08:53:20 -07:00
Manuel Lauss 42a4f17dc3 MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY
Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done
by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1461/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:06 +01:00
Marek Vasut a9c0629cde [ARM] pxa/balloon3: PCMCIA Support
This driver adds support for the on-board CF socket.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:45 +08:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Dominik Brodowski 127c03cdba pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq
NR_IRQS may be as low as 16, causing a (harmless?) buffer overflow in
pcmcia_setup_isa_irq():

static u8 pcmcia_used_irq[NR_IRQS];

...

		if ((try < 32) && pcmcia_used_irq[irq])
			continue;

This is read-only, so if this address would be non-zero, it would just
mean we would not attempt an IRQ >= NR_IRQS -- which would fail anyway!
And as request_irq() fails for an irq >= NR_IRQS, the setting code path:

			pcmcia_used_irq[irq]++;

is never reached as well.

Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
CC: stable@kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
2010-08-03 16:43:13 +02:00
Dominik Brodowski ad0c7be28b pcmcia: insert PCMCIA device resources into resource tree
Insert PCMCIA device resources into the resource tree. However, this is
currently only implemented for sockets which do not statically map the
resources.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:04:19 +02:00
Dominik Brodowski 8f677ea07a pcmcia: export resource information to sysfs
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:04:18 +02:00
Dominik Brodowski 0ca724d37a pcmcia: use struct resource for PCMCIA devices, part 2
Use struct resource * also for iomem resources.

CC: linux-mtd@lists.infradead.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:04:16 +02:00
Dominik Brodowski b5cb259e7f pcmcia: remove memreq_t
Page already had to be set to 0; Offset can easily be passed as
parameter to pcmcia_map_mem_page.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:04:14 +02:00
Dominik Brodowski a3d0d4d8dd pcmcia: move local definitions out of include/pcmcia/cs.h
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:04:13 +02:00
Dominik Brodowski 90abdc3b97 pcmcia: do not use io_req_t when calling pcmcia_request_io()
Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:04:11 +02:00
Dominik Brodowski 2ce4905e4d pcmcia: use struct resource for PCMCIA devices
Introduce a new field into struct pcmcia_device named "resource" and of
type struct resource *, which contains the IO port ranges allocated for
this device. Memory window ranges and registration with the resource
trees will follow at a later date.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:02:44 +02:00
Dominik Brodowski 3dace8cf15 pcmcia: clean up cs.h
Remove some obsolete definitions from cs.h

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:02:42 +02:00
Dominik Brodowski 1d5cc192d4 pcmcia: use pcmica_{read,write}_config_byte
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead
of pcmcia_access_configuration_register.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03 09:02:35 +02:00
Dominik Brodowski ac8b422838 pcmcia: remove cs_types.h
Remove cs_types.h which is no longer needed: Most definitions aren't
used at all, a few can be made away with, and two remaining definitions
(typedefs, unfortunatley) may be moved to more specific places.

CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 21:07:39 +02:00
Dominik Brodowski ce3f9d71bd pcmcia: remove unused flag, simplify headers
As we only provide one way to set up resources now, we can remove
the resource-setup-related bitfield (except resource_setup_done).
In addition, pcmcia_state only consisted of one entry, so remove
this bitfield as well.

Suggested-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 21:07:37 +02:00
Dominik Brodowski 7b24e79882 pcmcia: split up central event handler
Split up the central event handler for 16bit cards into three individual
functions.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 21:07:34 +02:00
Dominik Brodowski 216d7cdd3b pcmcia: simplify event callback
The event callback for handling 16bit PCMCIA cards only needs to be
informed about a few events. Furthermore, send_event may already
only be called with skt->skt_mutex held, which also protects against
the module being removed behind the callback's back.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 21:07:32 +02:00
Dominik Brodowski 5716d415f8 pcmcia: remove obsolete ioctl
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 21:07:26 +02:00
Linus Torvalds 6aa033d7ef Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text
  ARM: 6263/1: ns9xxx: fix FTBFS for zImage
  ARM: 6262/1: arm/clps711x: fix debug macro compilation failure
  ARM: 6261/1: arm/shark: fix debug macro compilation failure
  ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure
  ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure
  ARM: 6258/1: arm/h720x: fix debug macro compilation failure
  ARM: 6233/1: Delete a wrong redundant right parenthesis
  ARM: 6230/1: fix nuc900 touchscreen clk definition bug
  [ARM] pxa: fix incorrect CONFIG_CPU_PXA27x to CONFIG_PXA27x
  [ARM] pxa/colibri-pxa300: fix AC97 init
  [ARM] pxa: fix incorrect order of AC97 reset pin configs
  [ARM] pxa: fix frequency scaling for pcmcia/pxa2xx_base
  [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine
  [ARM] pxa/corgi: fix MMC/SD card detection failure
2010-07-26 08:20:38 -07:00
Patrick McHardy 418c527873 pcmcia: fix 'driver ... did not release config properly' warning
Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing
the irq.  The IRQ is now released in pcmcia_disable_device(), however
p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-21 13:52:36 +02:00
Marek Vasut d344a21a9a [ARM] pxa: fix frequency scaling for pcmcia/pxa2xx_base
The MCxx values must be based off memory clock, not CPU core clock.

This also fixes the bug where on some machines the LCD went crazy
while using PCMCIA.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-13 16:09:06 +08:00
Dominik Brodowski e4f1ac2122 pcmcia: do not initialize the present flag too late.
The "present" flag was initialized too late -- possibly, a card
was already registered at this time, so re-setting the flag to 0
caused pcmcia_dev_present() to fail.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-05 12:37:48 +02:00
Jiri Kosina f1bbbb6912 Merge branch 'master' into for-next 2010-06-16 18:08:13 +02:00
Uwe Kleine-König 421f91d21a fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:05:05 +02:00
Dominik Brodowski b83156b52d pcmcia: avoid validate_cis failure on CIS override
Commit a8408c17 introduced a new check to pccard_validate_cis(),
which avoids any "late" calls to this function. This broke the
insertion of cards which require a CIS override which changes
the number of card functions. Fix this by asserting that this
is _not_ a late call, but a proper call early during the card
insertion process.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16138

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
CC: <stable@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-07 18:34:16 +02:00
Justin P. Mattock 4f2d364b31 pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI
Seems pointless to have two #ifdef's with the same
CONFIG_YENTA_TI. Remove the extra one and
move CARDBUS_TYPE_ENE with the others.

[linux@dominikbrodowski.net: spelling & whitespace fixes]
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-07 18:22:57 +02:00
Dominik Brodowski 02caa56e4b pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
Keeping the saved I365_CSCINT flag around breaks PCMCIA on some system,
and is only needed on a few systems to get PCMCIA to work. This patch
allows PCMCIA to work on both types, and it fixes
https://bugzilla.kernel.org/show_bug.cgi?id=16015

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
CC: <stable@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-07 18:20:02 +02:00
Anatolij Gustschin 2005ce3521 of/pcmcia: m8xx_pcmcia.c: Fix build failures
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- typo in match_table field in the struct device_driver
  (which shoud be of_match_table)

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02 21:02:38 -06:00
Linus Torvalds f13771187b Merge branch 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing
* 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  uml: Pushdown the bkl from harddog_kern ioctl
  sunrpc: Pushdown the bkl from sunrpc cache ioctl
  sunrpc: Pushdown the bkl from ioctl
  autofs4: Pushdown the bkl from ioctl
  uml: Convert to unlocked_ioctls to remove implicit BKL
  ncpfs: BKL ioctl pushdown
  coda: Clean-up whitespace problems in pioctl.c
  coda: BKL ioctl pushdown
  drivers: Push down BKL into various drivers
  isdn: Push down BKL into ioctl functions
  scsi: Push down BKL into ioctl functions
  dvb: Push down BKL into ioctl functions
  smbfs: Push down BKL into ioctl function
  coda/psdev: Remove BKL from ioctl function
  um/mmapper: Remove BKL usage
  sn_hwperf: Kill BKL usage
  hfsplus: Push down BKL into ioctl function
2010-05-24 08:01:10 -07:00
Grant Likely cf9b59e9d3 Merge remote branch 'origin' into secretlab/next-devicetree
Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22 00:36:56 -06:00
Grant Likely 4018294b53 of: Remove duplicate fields from of_platform_driver
.name, .match_table and .owner are duplicated in both of_platform_driver
and device_driver.  This patch is a removes the extra copies from struct
of_platform_driver and converts all users to the device_driver members.

This patch is a pretty mechanical change.  The usage model doesn't change
and if any drivers have been missed, or if anything has been fixed up
incorrectly, then it will fail with a compile time error, and the fixup
will be trivial.  This patch looks big and scary because it touches so
many files, but it should be pretty safe.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-22 00:10:40 -06:00
Chris Wright 2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Linus Torvalds 5429126351 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits)
  pcmcia: disable PCMCIA ioctl also for ARM
  drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
  drivers/staging/comedi: dev_node removal (ni_mio_cs)
  drivers/staging/comedi: dev_node removal (ni_labpc_cs)
  drivers/staging/comedi: dev_node removal (ni_daq_dio24)
  drivers/staging/comedi: dev_node removal (ni_daq_700)
  drivers/staging/comedi: dev_node removal (das08_cs)
  drivers/staging/comedi: dev_node removal (cb_das16_cs)
  pata_pcmcia: get rid of extra indirection
  pcmcia: remove suspend-related comment from yenta_socket.c
  pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
  pcmcia: remove pcmcia_add_device_lock
  pcmcia: update gfp/slab.h includes
  pcmcia: remove unused mem_op.h
  pcmcia: do not autoadd root PCI bus resources
  pcmcia: clarify alloc_io_space, move it to resource handlers
  pcmcia: move all pcmcia_resource_ops providers into one module
  pcmcia: move high level CIS access code to separate file
  pcmcia: dev_node removal (core)
  pcmcia: dev_node removal (remaining drivers)
  ...
2010-05-20 09:09:46 -07:00
Grant Likely 61c7a080a5 of: Always use 'struct device.of_node' to get device node pointer.
The following structure elements duplicate the information in
'struct device.of_node' and so are being eliminated.  This patch
makes all readers of these elements use device.of_node instead.

(struct of_device *)->node
(struct dev_archdata *)->prom_node (sparc)
(struct dev_archdata *)->of_node (powerpc & microblaze)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18 16:10:44 -06:00
Dominik Brodowski acd200bf45 pcmcia: disable PCMCIA ioctl also for ARM
As per a3f916f2c8, disable the long
obsolete PCMCIA ioctl also for ARM.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-17 15:44:59 +02:00
Arnd Bergmann 55929332c9 drivers: Push down BKL into various drivers
These are the last remaining device drivers using
the ->ioctl file operation in the drivers directory
(except from v4l drivers).

[fweisbec: drop i8k pushdown as it has been done from
procfs pushdown branch already]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-17 05:27:41 +02:00
Marek Vasut addff0faec [ARM] pxa: add support for Voipac PXA270 PCMCIA
PCMCIA support for Voipac PXA270

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
Dominik Brodowski 378b451ede pcmcia: remove suspend-related comment from yenta_socket.c
While pci_set_power_state() is called by the PCI core
unconditionally on all PCI devices, it is not called on _any_
PCI bridge device. Therefore, it is not surprising calling
pci_set_power_state() on CardBus devices causes trouble.

CC: dbrownell@users.sourceforge.net
CC: gregkh@suse.de
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:24 +02:00
Dominik Brodowski 059f667d9f pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
This avoids multiple lock takings in several codepaths.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:23 +02:00
Dominik Brodowski a60f22c4af pcmcia: remove pcmcia_add_device_lock
As all cards to pcmcia_device_add() are already locked by skt_mutex, and
the critical sections inside this function are further protected by
ops_mutex, there's no need to keep a third lock around. Therfore, remove
pcmcia_add_device_lock.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:22 +02:00
Tejun Heo 6d59622e52 pcmcia: update gfp/slab.h includes
Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:20 +02:00
Dominik Brodowski cf26e8dc41 pcmcia: do not autoadd root PCI bus resources
On the PCI root bus on the x86 architecture, the risk of hitting
some strange system devices is too high: If a driver isn't loaded,
the resources are not claimed; even if a driver is loaded, it
may not request all resources or even the wrong one. We can neither
trust the rest of the kernel nor ACPI/PNP and CRS parsing to get it
right.

Therefore, explicitly spell out what safeguards we provide, and add
a safeguard to only use resources which are set up exclusively for
the secondary PCI bus (non-subtractive mode): the risk of hitting
system devices is quite low, as they usually aren't connected to
the secondary PCI bus.

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:19 +02:00
Dominik Brodowski b19a7275de pcmcia: clarify alloc_io_space, move it to resource handlers
Clean up the alloc_io_space() function by moving most of it to
the actual resource_ops. This allows for a bit less re-directions.
Future cleanups will follow, and will make up for the code
duplication currently present between rsrc_iodyn and rsrc_nonstatic
(which are hardly ever built at the same time anyway, therefore no
increase in built size).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:19 +02:00
Dominik Brodowski 49b1153adf pcmcia: move all pcmcia_resource_ops providers into one module
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:18 +02:00
Dominik Brodowski 5c128e8432 pcmcia: move high level CIS access code to separate file
No code changes.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:18 +02:00
Dominik Brodowski b9300aa744 pcmcia: dev_node removal (core)
Remove the dev_node declaration. We now only pass the device name
to the deprecated userspace tools.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:17 +02:00
Dominik Brodowski eb14120f74 pcmcia: re-work pcmcia_request_irq()
Instead of the old pcmcia_request_irq() interface, drivers may now
choose between:

- calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.

- use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
  clean up automatically on calls to pcmcia_disable_device() or
  device ejection.

- drivers still not capable of IRQF_SHARED (or not telling us so) may
  use the deprecated pcmcia_request_exclusive_irq() for the time
  being; they might receive a shared IRQ nonetheless.

CC: linux-bluetooth@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-usb@vger.kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:13 +02:00
Dominik Brodowski a7debe789d pcmcia: pass FORCED_PULSE parameter in pcmcia_request_configuration()
As it's only used there it makes no sense relying on pcmcia_request_irq().

CC: alsa-devel@alsa-project.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:12 +02:00
Dominik Brodowski 6f840afb41 pcmcia: replace struct irq with uint pcmcia_irq in struct pcmcia_socket
As we don't need the "Config" counter any more, we can simplify
struct pcmcia_socket.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:12 +02:00
Dominik Brodowski 6f0f38c45a pcmcia: setup IRQ to be used by PCMCIA drivers at card insert
Setup the IRQ to be used by PCMCIA drivers already during the device
registration stage, making use of a new function pcmcia_setup_irq().
This will allow us to get rid of quite a lot of indirection in the
future.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:11 +02:00
Dominik Brodowski 0cb3c49cdd pcmcia: remove unused IRQ modification feature
The IRQ modification feature was unused, and I see no reason to keep it.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:10 +02:00
Linus Torvalds 2c32b1dab5 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix compilation after 16bit state locking changes
  pcmcia: order userspace suspend and resume requests
  pcmcia: avoid pccard_validate_cis failure in resume callpath
2010-05-07 14:11:09 -07:00
Marc Zyngier 15d0a87354 pcmcia: fix compilation after 16bit state locking changes
Commit 04de0816 (pcmcia: pcmcia_dev_present bugfix) broke the
deprecated ioctl layer. Fix it by getting rid of references to
unexisting fields.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-04 22:18:20 +02:00
Dominik Brodowski 4382124207 pcmcia: order userspace suspend and resume requests
Assert that userspace suspend and resume requests appearing
(almost) immediately are executed in the following order:
suspend, resume. This should result in "pccardctl reset"
behaving the same as before.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-04 22:15:34 +02:00
Dominik Brodowski cc83b08fc7 pcmcia: avoid pccard_validate_cis failure in resume callpath
If the PCMCIA CIS changed before a resume event (e.g. due to
a card exchange while being suspended, possibly also during
a call to "pccardctl reset"), also set the function count to
zero so that the subsequent call to pccard_validate_cis() does
not fail.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-03 14:34:44 +02:00
Manuel Lauss 0000a53901 MIPS: DB1200: PCMCIA card detection must not be auto-enabled.
Same issues as SD card detection:  One of both is always triggering and the
handlers take care to shut it up and enable the other.  To avoid messages
about "unbalanced interrupt enable/disable" they must not be automatically
enabled when initally requested.

This was not an issue with the db1200_defconfig due to fortunate timings;
on a build without network chip support the warnings appear.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1133/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30 20:52:43 +01:00
Alexander Kurz 83bf6f11e8 pcmcia: fix matching rules for pseudo-multi-function cards
Prevent PCMCIA_DEV_ID_MATCH_FUNC_ID from grabbing PFC-cards:
I changed the code, so that the first matching struct
pcmcia_device_id _PFC_ entry will mark the card has_pfc,
preventing PCMCIA_DEV_ID_MATCH_FUNC_ID to match.

[linux-pcmcia@lists.infradead.org: re-order commit message]
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-26 20:09:07 +02:00